Brush deburring machine

Boschert K 3

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Bsdpfxjwz I Acj Aflolr Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: new, Year of construction: 2024, Working width: 380 mm Bedetnf Rrjpfx Aflslr Working height: 150 mm 1. Unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with a 3 kW motor 2. Unit, brush: Scotch Brite Hard / diameter 210 mm, variable drive Height adjustment: handwheel Height display: mechanical counter Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Year of construction: 2011, condition: reconditioned (used), Boschert tool grinding machine EASY SHARP Equipped for Trumpf tooling system (Amada system optional) Machine for punching tool maintenance with cooling system and especially powerful motor, therefore also suitable for use with diamond grinding wheels. Used machine is currently being overhauled Equipment for Trumpf tooling system up to size III Accessories: Tool holder for punch flat and whisper Die holders for size I, II and III Bodpfxjid I T Io Aflslr New corundum grinding wheel Dressing diamond Cooling system and machine base revised Technical data: Grinding wheel diameter 175 mm height adjustment 150 mm working area 400 x 150 mm motor power 2,2 kW Motor speed 2825 rpm Optional adapter for Amada system available Pictures similar

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Bedpskvnumsfx Aflslr Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2000, condition: excellent (used), Span approx. 20,0 m Lifting height approx. 8,0 m Make/reconstruction HILGERS/TEICHMANN Modification/New construction 2000/2021 Crane equipped with: - Double-rail trolley with 4-corner rope outlet - Magnet System prepared Bodjqfc Egepfx Afljlr - Radio remote control - Optionally with magnetic traverse or spreader

Year of construction: 1996, condition: good (used), machine/vehicle number: xxxx, High performance - bench tapping machines on T-slot plate Technical data: - Tapping capacity approx. M 3 - M 16 - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm . table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chucks 250 mm - pneumatic connection with pressure reducer - mobile underframe - space requirement approx. W 2400 x H 2000 x D 1000 mm Bjdpfx Afsf Tcy Delslr - weight approx. 1100 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Blsdpoxn Dhlefx Afljr Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Hydraulic tool clamping (WZS 5000) Bending beam Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning

Year of construction: 2008, condition: ready for operation (used), Punching force: 220kN, working range combined operation X/Y: 2585mm/1650mm, working range punching operation: 3085mm/1740mm, working range laser operation X/Y: 3085mm/1650mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 230kg. Positioning speed: 109m/min, max. stroke rate: 900 strokes/min, max. marking rate: 2800 strokes/min, tool positions: 18, accuracy: +/-0.1mm. Machine dimensions X/Y/Z: approx. 8000mm/9000mm/2500mm, weight: approx. 22500kg. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Bsdpfx Afjxddagololr

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, overall weight: 22,800 kg, pressing force: 250 t, CNC press brake Manufacturer: Weinbrenner Type: GP250 Blodpfor Sxq Rsx Aflsr Machine specification:- Crowning -Matrix displacement -Rear stop type 2 -Front bending aid (removed for transportation) -DNC 900PS control unit All documentation for the machine is available.

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Y-Axis: 1300 mm Additional equipment: various tools Recently installed new parts: Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Bodpfx Aewkd Efoflolr Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)