Used Ras Roll Forming Line for sale (23,082)

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Lsdpfx Aasyvav Nozort

Condition: new, Fully automated machines for standing seam sheet metal profiling (CLICK), available in various sizes and designs. We offer several standing seam profiles. Delivery times and machine configurations are determined on a case-by-case basis for each order. Please contact us for additional information and technical documentation. Roll forming machine. Ledpfx Ajy Rkuyeazjrt

Condition: new, Year of construction: 2026, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. As an additional equipment for the machine, we offer: - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. Lrsdpfx Aaon Hqmmjzet So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Ledpfetp H Erjx Aazjrt Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2025, Roll forming roof panel machine F3 with cover Roll forming roof panel machine F3 is roofing equipment that is used in process of standing seam roof panel production and standing seam roofing installation. With help of electric motor torque goes from motor through sprockets and the connection chains to the rolling rollers of the machine making them to rotate and form necessary profile. In order to protect workers while working with roll forming roof panel machine, we offer to equip it with standard side covers and additional top part cover to protect forming part of machine. So, using standing seam roofing machine F3 with protective covers operators of machine will be protected from injury, and machine would be protected from any outside object to get into working mechanism. However, while working with roof machine, it’s possible to take off upper cover and leave side covers of machine while working. If upper cover isn’t needed you can purchase machine without it. Our roll former standing seam machine is light and mobile one so you can work with it at your workshop or directly at roof installation place saving money on transportation expenses. Roll forming roof panel machine F3 has special adjusting screw to adjust machine for different panel width production. You just need to rotate adjusting screw to get necessary panel width sizes. Standing seam roof machine F3 can work with different materials such as steel, aluminum, copper. Machine can be adjusted to roll different metal thicknesses. Lodpfjh R I Iuex Aazort As additional options with F3 machine you can get: length measuring device ribbed panel rolls radius panel rolls cross cutting knife floor decoiler hand seamers electric seaming machine ESM-1 sliding clip formers ribbed panel forming machine RPFM

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Lsdpfxep Stgns Aazert Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: used, Year of construction: 2014, Roll forming line Trima K2 with compact proofing cabinet G2-3 Suitable for round, long-rolled, enveloped, and flattened products, e.g.: hamburger buns, hot dog buns, mini baguettes Dough divider and rounder K2 (year of manufacture 2014) Digital adjustment of weight, shaping chamber height, shaping speed, and shaping time Ljdpjz A Ry Iefx Aazert Dough hopper capacity 25 kg with infeed belts Mehler for dough hopper, shaping chamber, and spreading belts Manual adjustment of pressing force for different types of dough Weight range: 25-95g / 50-150g With foot switch Touchscreen control with recipe memory Output: max. 3,200 pieces/h Proofing cabinet G2-3 (year of manufacture 2013) Proofing time approx. 3 min (depending on the upstream machine) Number of holders: 100 With motorized top belt including adjustable speed Manual removal of dough pieces

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI Ledpfx Aaexya Hzszort

Condition: new, Year of construction: 2025, Metal siding “Soffit” production line SPM-1 auto Metal siding “Soffit” production line SPM-1 auto is an excellent solution for companies with business in metal siding and metal decor elements production for various buildings and structures. Soffit profiles are very popular to arrange gables, cornices and attics, and without perforation, they can be part of cladding building facades of various configurations. Perforation holes provide additional ventilation of the under-roof space and, therefore, optimal conditions for the roofing system. Air circulation helps to avoid the formation of condensation and extra humidity, as well as corrosion of metal tiles or corrugated sheets. Metal siding Soffit SPM-1 auto is fully automatic line. This equipment can go as a separate automatic machine, consisting of a rolling mill with an automatic system and an automatic profile guillotine, or in combination with an uncoiler. The metal uncoiler can be manual for working with metal rolls up to 800 kg or automatic, with a loop converter and speed control for working with rolls up to 1500 kg. Specifications: Dimensions (mm) 6650x1200x1600 Weight, kg): 2900 Drive power rolling machine: 3 kW, 380V Drive power guillotine shears: 1.1kW Maximum thickness of sheet metal (mm.): 0.6 Ledpfewwip Ajx Aazort Forming steps number -18 Shaft diameter (mm) – 55 Rolling speed (m/min.): 10-15 Automatic roll forming soffit panels production machine SPM-1 auto makes panels with unlimited length. The machine has 18 pairs of forming rolls, providing high quality of the final products. There is special perforating module on the final stands of machine, responsible for cutting out perforation holes during roll forming. It is possible to use the machine both with and without this module, thus it is possible to obtain panels both with and without perforation, depending on the customer’s needs. We use alloy tool steel for rollers of machine and make them on high-precision CNC turning equipment, ensuring high product standards. Guillotine profile shears is at the machine exit and has electric drive to work. The electric drive of the shears is a more reliable solution compared to pneumatic or hydraulic systems for working on cutting shears of other line manufacturers. The rolling speed of the line is 10-15 meters per minute with the possibility of programmatic adjustment of this parameter. Specifications: Material width (mm) 409 The material thickness (mm) 0,4-0,6 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, operating pressure: 6 bar, conveyor belt width: 1,000 mm, production capacity: 18,000 unit/h, The new price of the machine was €460,000! TECHNICAL DETAILS System type: NIVERPLAST packaging line / roll packaging machine Maximum output: 18,000 products/h Packaging unit: 20 pieces Electrical connection: 400 V AC + N + PE / 50 Hz Minimum compressed air connection: 6 bar Compressed air connection: 3/8" Camera counting module Camera system: 1 color camera Baguette capacity: 10,000 pieces/h Maximum capacity for individual products: 60,000 pieces/h LED lighting lifespan: 30,000 h Touchscreen: 19" Conveyor width: 1,000 mm SEPP tubular bag machine Type: VFFS 45° Filling weight: 0.5 - 5.0 kg Maximum output: 2,400 bags/h Drive: AC motor, Lenze Frame: Stainless steel Protective cover: Polycarbonate 6 mm Bag dimensions Bag length: min. 100 mm Bag length: max. 900 mm Bag width: min. 220 mm Bag width: max. 465 mm Film dimensions Film width: min. 500 mm Film width: max. 970 mm Carton erector C-400 Carton length: min. 300 mm Carton length: max. 600 mm Carton width: min. 200 mm Carton width: max. 400 mm Carton height: min. 120 mm Carton height: max. 500 mm Format changeover time: approx. 1 - 2 min Working and discharge height: 600 mm ± 30 mm Carton closer CS-300 Carton length: min. 300 mm Carton length: max. 650 mm Carton width: min. 200 mm Carton width: max. 450 mm Carton height H: min. 115 mm Carton height H: max. 350 mm Carton height C: min. 200 mm Carton height C: max. 500 mm Format changeover time: approx. 1 min Adhesive tape roll length: approx. 990 m Adhesive tape width: 50 mm EQUIPMENT Product feed conveyor Elevator conveyor Intermediate conveyor Camera counting Platform for camera counting Batch conveyor with buffer flap Cross conveyor Discharge chute SEPP Niverplast tubular bag machine 45° inclined forming tube Thermal transfer printer Lredpfx Aaozaq Anezot Bag transport Turntable Carton erector Lantech C-400 Empty carton conveyor Button to request empty cartons Packing position Full carton conveyor Gravity roller conveyor Carton closer Control cabinet including control panel and power supply LED light bar, air-cooled Retraction belt with pneumatic drive Separation finger made of stainless steel Stainless steel frame Stainless steel control cabinets on the counting module Film roll drive Detection of empty film rolls Film tear detection Film buffer Tension cylinder Integrated film alignment Automatic film alignment with sensor Impulse sealing with film cutting knife Bottom closure with self-adhesive strip Format adjustment by means of handwheels Clear plastic cover Side presser on the cutting magazine Side curtain on the cutting magazine Control "Carton properly erected" Control "Self-adhesive tape used up or torn" Control "Carton past vacuum suction frame" Discharge with photocell control "Discharge free" Carton closure on top with adhesive tape Open cable channel with metal-detectable cable ties Powder-coated control cabinet HMI Lenze v800-P IPC Lenze, Codesys, IEC 61131 Safety components Pilz Drives Lenze Pneumatic components Festo Sensors Sick

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings Ledpfx Aaoztwx Uszert workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: refurbished (used), ROLLFORMING MACHINE PRODUCING SQUARE PROFILES WITH 5 TONES OF TOOLS MADE IN ITALY Ledpfx Aasfgl Aqozjrt

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. Lrsdpfx Ajm Twnleazjt As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: used, DALLAN Rollforming machine | Omega profiles 60mm & 80 mm With 11 forming stations, fully equipped and currently set up for Omega 60 mm, the line includes additional tooling for Omega 80 mm profiles. This machine is complete, in excellent condition. DALLAN rollforming line with 11 forming stations: · Maximum sheet width: 300 - 350 mm · Controls: Dual console · Shaft diameter: 60 mm Lrjdpfx Aasxugf Hjzst · End unit: Integrated cutting station · Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm · Idle decoiler · Tooling box (approx. 1,000 kg) for producing other profile types · Dimensions: 10,000 x 1,400 x 1,600 mm (L x W x H) · Weight: 10 tons Maximum sheet width: 300 - 350 mm Controls: Dual console Shaft diameter: 60 mm End unit: Integrated cutting station Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm

Condition: used, functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: RAS, controller model: 4,0, working width: 3,200 mm, lower beam adjustment: 650 mm, folding beam adjustment: 150 mm, installation height: 2,200 mm, throat depth: 1,000 mm, bending angle (max.): 180 °, bending radius (max.): 25 mm, bending radius (min.): 1 mm, operating speed: 120 mm/s, reverse speed: 200 mm/s, number of axes: 4, type of crowning: CNC-controlled, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, back gauge speed R-axis: 200 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 3,250 mm, overall weight: 11,500 kg, total length: 5,600 mm, total width: 3,360 mm, total height: 2,200 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, FOR SALE: RAS XLTBEND 71.30 UPDOWN CNC PRESS BRAKE Price: 250,000 EUR net – negotiable For sale, a high-quality RAS XLTbend 71.30 UpDown CNC press brake from the renowned German manufacturer, RAS Reinhardt Maschinenbau GmbH. This machine is designed for the professional production of components from steel, stainless steel, and aluminum sheets. The UpDown technology enables bending upwards and downwards without the need to rotate the workpiece, which significantly reduces production time and increases efficiency. TECHNICAL DATA: • Working length: 3200 mm • Max. sheet thickness: Lrsdpszfvkgofx Aazjt mild steel: 3.0 mm stainless steel: 2.0 mm aluminum: 4.0 mm • Beam opening height: 150–650 mm • Automatic adjustment of bending parameters via CNC • Servo drives for working axes • Beam-in-Beam technology for very high bending precision • CNC control with 3D visualization EQUIPMENT: • XLTbend CNC control • Two 24" touch screen monitors • Import of STEP, DXF, GEO files • Automatic generation of bending programs • 3D bending process simulation • "T"-type positioning table • Positioning system with suction cups • Automatic bending sequence • Air-conditioned control cabinet • Safety and diagnostics system ADVANTAGES: • Very high production efficiency • Minimization of operator involvement • Ability to produce complex parts without repositioning the sheet • Ideal for the production of enclosures, cassettes, control cabinets, ventilation elements, and sheet metal structures Condition: very good Location: Skarżysko-Kamienna, Poland Price: 250,000 EUR net – negotiable Contact: Kamil Wiatrak

Condition: used, functionality: unexamined, Year of construction: 2015, machine/vehicle number: 6233, Technical data: Maximum sheet thickness (sheet steel) 3mm Maximum sheet thickness (chrome steel) 2mm Maximum sheet thickness (aluminum) 4mm Maximum bending length 3200mm Maximum four-sided bending part height 300mm Minimum base area of a finished bent part 185mmx210mm Upper beam stroke 650mm Maximum bending beam travel distance 150mm Positioning accuracy of PosLift stop system 0.01mm Working height 1000mm Lredpfxsvxz Tqs Aazst Machine width with PosLift stop system in rectangular shape approx. 3000mm Machine width with PosLift stop system in J-shape approx. 4700mm Machine length approx. 6700mm Maximum machine height approx. 2600mm Net weight approx. 13000kg Air pressure 5.5 bar Total drive power 14kW Speeds: Bending beam 140°/s Upper beam 95mm/s

Condition: ready for operation (used), Year of construction: 1989, - USED - ROLL FORMING MACHINE STEPS: N. 20 WEIGHT: 25000 Kg OVERALL DIMENSIONS: 7300 x 2400 x 1500 mm NOTE: PROFILE: WIDTH FROM 85 mm TO 670 mm; LENGTH FROM 2000 TO 5000 mm; THICKNESS FROM 0,6 TO 1,5 mm IN AUTOMATIC; No 5 4-STEPS HEADS; FORMING LINE FOR CABLE TROUGHS AND CABLE TRAY COVERS PRODUCTION; EQUIPPED WITH LOADING/UNLOADING ROLLER CONVEYORS Ledezqwf Nepfx Aazsrt

Condition: excellent (used), Year of construction: 2022, operating hours: 800 h, Equipment: documentation/manual, Top specification forming coating and frying line. B ought new in 2022 and only used for a few months. Fryer 6m x 650mm has 800 running hours. Lrjdpfx Aaszii N Dozet

Condition: like new (used), Year of construction: 2022, Infeed height 900 mm Infeed width 300 – 800 mm Non-ferrous metals: Either 0.6 – 0.8 mm or 0.8 – 1.0 mm (has to be set before ordering) Lredpfx Aaexwxdgjzst Non-ferrous metals: 1.0 – 1.2 mm (only with façade profiles) Steel (320 N/mm²): 0.55 – 0.70 mm Stainless steel: Max. 0.5 mm 3,830 mm x 2,045 mm x 1,275 mm 1,770 kg

Condition: new, Year of construction: 2026, total width: 750 mm, total length: 2,900 mm, total height: 1,160 mm, warranty duration: 12 months, overall weight: 400 kg, Compact roll forming equipment for producing metal rainwater downpipes This portable roll forming machine is designed for the production of rectangular metal downspouts and rainwater downpipes from pre-painted or coated sheet steel. The machine progressively forms a flat metal strip into a finished rectangular profile suitable for residential, commercial and industrial rainwater drainage systems. The dimensions and geometry of the finished downpipe can be manufactured according to the customer’s technical requirements. The roll tooling is designed for a specific rectangular profile, taking into account the required width, height, corner shape, surface pattern, material thickness and connection type. The machine is suitable for manufacturers of: rectangular metal downspouts; rainwater downpipes; roof drainage systems; gutter and downspout components; roofing accessories; façade and sheet-metal products; custom cold-formed metal profiles. Its compact size and relatively low weight make it suitable for small workshops, roofing companies and production sites where a large stationary roll forming line is not required. Custom profile dimensions The finished profile is produced according to the customer’s drawing, sample or technical specification. The machine is therefore supplied as a custom rectangular downspout roll former, configured for the required finished product. The basic production process is: Ledpfx Aaezrnxcjzort Decoiler → Roll forming system → Manual saw cutting Main advantages Compact and portable construction Custom tooling for the required downpipe size Production directly from coated sheet steel Suitable for pre-painted and galvanized material Gradual roll forming with controlled material deformation Low installed motor power Simple operation and maintenance Suitable for small-batch and regular production Finished products can be cut to the required length Reduced dependence on purchased ready-made downpipes Suitable for workshops with limited production space Material The standard configuration is designed for coated sheet steel with a thickness of approximately 0.4–0.5 mm. Depending on the agreed configuration, the machine may process: pre-painted steel; galvanized steel; polymer-coated sheet steel; other thin sheet-metal materials after technical approval. The exact material grade, tensile strength, thickness and coating must be specified before the roll tooling is designed. Technical specifications: Machine type Portable roll forming machine Finished product Rectangular metal downspout / downpipe Profile dimensions According to customer specification Material Coated sheet steel Material thickness Approx. 0.4–0.5 mm Forming speed Approx. 3–8 m/min Main motor power 3 kW Transmission Gear and sprocket drive Auxiliary forming elements Polyurethane wheels Cutting system Manual circular saw Machine dimensions Approx. 2860 × 730 × 1160 mm Machine weight Approx. 400 kg Electrical supply 380 V, 50 Hz, 3-phase* Compact machine design This makes it suitable for: roofing contractors; rainwater system manufacturers; sheet-metal workshops; gutter and downpipe producers; building component manufacturers; small and medium-sized production facilities; companies producing custom roofing accessories. Scope of supply A custom set of roll forming tools will then be designed for the required product.

Year of construction: 2023, condition: new, We offer brand new roll former automatic line for corrugated metal sheet production. Depends on customer preferences we can produce line for 10, 20, 35, 44 or 57mm profile high. Some of lines we have ready on stock. Line is equipped with electric uncoiler up to 10t coils, roll forming part, cutting shear, sheet stacker for 10m length. Lsdpfx Aajkhaadozjrt Also we produce customized roll forming lines, metal tile lines, cut-to-length lines, slitting lines etc. To get more information about our machinery please contact our sales department

Condition: used, Year of construction: 2014, functionality: fully functional, MiniBendCenter RAS 79.05 Fully automatic panel bending center for small parts - General Information: Direct from manufacturer Manufacturer’s warranty Maintenance included Latest possible software version - General technical data (in mm): Blank length: 50–600 Blank width: 40–600 Sheet thickness max. (400 N/mm²), tool-dependent: 3.0 Upper beam stroke max.: 500 mm Minimum flange height (reference value, tool-dependent): 5 × s Max. flange height: 127 Weight of bending cell: 10 tons Weight of enclosure and electrics: approx. 2,027 kg Weight of machine elements: approx. 945 kg - Machine-specific data: Motor operated; 400V, 50/60 Hz, 3-phase Year of manufacture: 2014 Condition: Refurbished – good used condition - Machine Configuration: Bending cell: - Automatic sheet thickness adjustment - Automatic tool clamping - Blank scanner Main manipulator: - 3 servo motors for X, Y, Z axes - 1 servo motor for lower rotary axis + separate drive for rotary axis - Double sheet detection Tool changer: - 3 servo motors for X, Y, Z axes Lredpfx Aasx Hyhuozjt - 1 pneumatic swivel drive for rotary axis - Tool gripper - Two-level tool magazine - Automatic tool clamping in tool magazine Enclosure: - Bending cell, front and rear Mobile operating panel: - 18" Touch & More control Intelligent loading robot Combined camera-scanner system Analysis software Transfer table, Sauerfeld (52x9 mm) suction row (7x20 mm) Pallet station: - Roller conveyor and heavy-duty chain conveyor - 1 position for new pallets (parts to be processed) - 1 position for "pallet in process" - 2 positions for finished pallets (empty or with remaining parts) Curved transport conveyor with 6 connection stations Finished part output enclosure Complete tool set RAS CAM-Office software incl. SolidWorks license and 2-year maintenance contract - Sample images Sample video available on request -

Condition: used, Year of construction: 2017, Roll production line, dough band system, Lippelt Rustica Round 220 - Softrounder Year of manufacture: 2017 Condition: used, fully functional Approx. 5530 operating hours Rustica with Softrounder – the all-rounder for processing square and round-shaped wheat rolls With punching station and cutting guillotine – for individual and unique rolls Processes all types of dough, cuts all sizes, stamps patterns into your rolls, or cuts out triangles Ideal for producing rose rolls with fat application 1 to 6-row operation Discharge device for baking trays with a maximum size of 670 x 1000 mm With transverse belt, retractable for the discharge device for further processing Transverse belt with pressure roller and shaping board With seed station (water bath and seed rotating disc), type: Rumo 6 for double-sided seeding Touchscreen control with recipe memory Dough band width 220 mm Includes 2 punching dies (Veronese 5-row and double oblique cut) Includes shaping cups for 40-80g (5-row) and 80-120g (3-row) Lrjdpjz A Ry Usfx Aazst

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, total width: 1,500 mm, total length: 4,500 mm, total height: 2,820 mm, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + GEK, year of manufacture 2011 Dough divider & rounder Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pieces/hour • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4 rows Lsdpfxey St U So Aazert • GEK pre-fermentation cabinet matching the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics modernized (new display) INSPECTION and TRIAL RUN possible (only) by appointment Freight possible, fully assembled with a jumbo truck (L/W/H = approx. 4,500 mm x 1,500 mm x 2,820 mm)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0630, type of input current: three-phase, input voltage: 400 V, coil weight: 6,000 kg, overall weight: 12,000 kg, Machine available immediately. We are offering a new TR32 trapezoidal roll forming machine. The machine is new and ready for collection. Type: TR32 Year of Manufacture: 2026 Serial Number: 0630 Ledpfx Aezl A I Sjazsrt Weight: 12,000 kg Maximum power: 12 kW Supply voltage: 3x400 V Supply frequency: (50–60) Hz THE MACHINE INCLUDES: - Electric decoiler with manual tension release, manually operated, capacity Q=6,000 kg; - Sheet metal feed with circular (rotary) knives - Profiling unit - Electromechanical guillotine - 6-meter sheet metal stacker + 6-meter transport cart - Control cabinet - Safety guards If you have any questions or require additional information, please send us a message or call us.