Roll forming line

Schlebach QUADRO-XL

Year of construction: 2000, condition: used, Roofing elevator / plug-in elevator Böcker ES13B year 2000 with drive motor 1,5 kW length 13 meters Nodpfx Abjn Hxz Todswc payload 200 kg with or without car trailer immediately available Location: Austria, near Vienna

Condition: good (used), We are offering a 2500 bar high-pressure waterjet from Falch. We used it to demarcate road markings and included the appropriate accessories. Year of manufacture: 2018, hourly output: 1322 bar, diesel engine, MOT and TÜV up to date, accessories: scater 25 260 surface cleaner, protective clothing, filter, drain hose with spiral insert, 5-meter high-pressure hose, €85,000 net. Can be viewed and tested on site! Nsdpfxov Rqx To Abdswc

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1, overall weight: 4 kg, Downspout Pipe Production Line Strip thickness: 0.6 - 0.7 mm Njdowvhnhepfx Abdjwc Material quality: Steel and Pre-painted Product diameter: Ø 100 mm ( 75, 87, 111,120 mm optional dimention) Production Line included: Double Head Decoiler: 4+4 tons, Roll Forming Machine casstte type ( with extra cassettes ) Hydraulic Cutting Unit.

Condition: good (used), In good technical condition and fully operational. Manufacturer: Bud Masz M. Stachlewski Steel thickness – 0.5-1 mm. Profile height: 40 mm. Entry width: 1250 mm. Overall width: 944 mm. Effective width: 915 mm. Min./max. length at a thickness of 0.5 lm/12 lm starting from a thickness of 0.75 mm Accessories, auxiliaries: screws, sealing tapes, profiled gaskets, Nodpfjx Tf Hcjx Abdewc anti-condensation treatment, light-transmitting profiles

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, working width: 1,250 mm, warranty duration: 12 months, number of feed rollers: 1, Demonstration Machine Slit Cut 1250 mm Manufacturer: CIDAN Forstner Year of manufacture: 2025 Motorized feed Nsdjwy Hwpjpfx Abdswc Longitudinal slitting with 5 pairs of knives with automatic infeed Crosscutting with rotary shear SPS1 control for automatic feed, longitudinal and crosscutting The Forstner SLIT longitudinal and crosscutting line is optimally suited for all sheet metal shops, drawing from years of experience. The system consists of a proven combination of traditional Forstner machines and can be combined with any manual or motorized decoiling unit. Key advantages: - The new design makes your SLIT line even better. - Now even more space-saving with the same strength. - LED slit knife illumination. - Table can be operated from both sides. - Simplest knife adjustment. Standard equipment: - Roller feeder hopper - Feeder table - 5 pairs of longitudinal knives - Crosscut rotary shear - SPS1 touch control - Speed: 25 m/min Cutting capacity in steel for longitudinal slitting: - With 3 pairs of knives: 1.5 mm - With 4 pairs of knives: 1.25 mm - With 5 pairs of knives: 1.0 mm

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Nodpfxsuzv Tzj Abdjwc Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar Nwsdpfx Aexabc Rjbdsc - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto; Njdpfx Abjq U N T Rjdjwc

Condition: used, Year of construction: 2010, functionality: fully functional, Used longitudinal and transverse cutting line Nwsdpfxsxvqzhj Abdjc Manufacturer: Forstner Year of manufacture: 2010 Performance: 2.00 mm at 400 N/mm² Equipment: - Motorized 3-ton decoiler with pressing arm - Material lifting table - Control: Siemens PLC - Speed: 25 m/min - Standard feed shaft - Standard feed table automatic straightening unit: - Straightening rollers: Programmable (MOP) - Straightening shafts: Standard Slitting: - Upper shaft adjustment: Motorized (MOV) - Number of slitting knives: 5 pairs Cross cutting: - Guillotine shear Additional equipment: - Light barrier unit - Manual 500 kg decoiler - Recoiling unit . Photos are currently being taken at the customer. The machine can be inspected on site by arrangement (Stuttgart area). Dismantling will take place around February 2026. No guarantees or warranties on used machines.

Condition: good (used), Profile roof tiles Nwsdpsxam Raofx Abdjc Entry width 1250 mm Material thickness 0.5 - 0.75 mm Year of manufacture 2002 Speed 8 m/sec.