Used Single-Arm Hammer for sale (12,892)

Condition: new, *Technical specification: Bwjdpsg Ewwrofx Am Tsr -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, Very well-maintained double-pressure press DM2 by Heuer Hammer. Immediately ready for use. Bwjdpfsxywkwox Am Tsr

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, Very well-preserved double-pressure press DM3 from Heuer Hammer. Immediately ready for use. Bedpexywlnsfx Am Tjwr

Condition: ready for operation (used), functionality: fully functional, Very well-maintained dual-pressure press DL5 from Heuer Hammer. Immediately ready for operation. Bwjdpfx Aexzft Nsm Tor

Condition: used, Hammer A3-41 jointer-planer combination machine, in very good condition, year of manufacture 2023, 4 kW motor power, 1800 mm table length, 410 mm table width, including spiral cutterhead, 230 mm planing thickness. Price changes, errors, and typographical mistakes reserved. Bsdpfxex H Udkj Am Tewr

Condition: used, Bandsaw Hammer 4400, in very good condition, 1.5 kW, approx. 110 kg Bodsx H Ud Rspfx Am Tewr Price changes reserved, errors, printing and typographical mistakes excepted.

Condition: new, Year of construction: 2023, Hammer Mill with electrical box and cyclone filter for sale. The machines has a CE certificate. Technical parameters: Electric motor power: 45Kw Capacity: 1500-2000kg/hour Machine size: 1750mmx900mmx1550mm. Weight 1300kg. Bwodpfx Amjxf Nw Hs Tjr Located Locally in Hungary (EU)

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Manufacturer: Single Temperiertechnik GmbH Bwsdpeyrnciefx Am Tor Model: Advanced Oil D2-180-18-0 Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: heat transfer oil Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling

Year of construction: 2017, condition: good (used), Single Compact K-160-9-24 160° C medium Water 11 KW year 2017 price: 4.950 € contact: Mr. Rainer Eckerle Bedpforupr Dex Am Tewr

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, The FABO FHC-1410 Hammer Crusher is designed for the efficient crushing of soft to medium-hard materials in quarrying, aggregate production, and recycling applications. With its high reduction ratio, it is ideal for producing fine aggregates and manufactured sand (M-sand) while delivering consistent product quality. Bsdpfx Amjzh Iyrs Towr Equipped with a heavy-duty hammer rotor and a robust feeding system, the FHC-1410 ensures continuous operation, high crushing efficiency, and reliable performance. It is suitable for processing limestone, gypsum, coal, and similar materials, as well as selected construction and demolition waste. Powered by an energy-efficient electric drive and controlled through a PLC-based automation system, the crusher offers stable operation, low energy consumption, and easy control. Its accessible maintenance points, replaceable wear parts, and user-friendly design help reduce downtime and simplify servicing. Technical Specifications Capacity: 40–80 t/h Maximum Feed Size: 50 mm Drive System: Electric For more information about the FABO FHC-1410 Hammer Crusher, please contact our sales team or visit our website.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, The FABO FSHC-1410 is a wheeled mobile hammer crusher developed for the efficient crushing of soft and medium-hard materials in aggregate production, mining, quarrying, and recycling operations. Thanks to its high reduction capability, the machine is particularly suitable for producing fine aggregates and manufactured sand. It is an excellent choice for processing limestone, gypsum, coal, and other similar materials, as well as construction and demolition waste. The plant is fitted with a powerful hammer crusher and a durable belt feeder that provide a continuous and controlled material flow into the crushing chamber. Its specially designed crushing system delivers high reduction ratios while ensuring a consistent product size and stable production performance. The integrated discharge conveyor enables efficient material handling, and the compact wheeled design allows the unit to be transported and commissioned quickly at different project sites. The FSHC-1410 is powered by an electric drive system and equipped with an advanced PLC automation unit, allowing operators to control and monitor the entire production process with ease. This combination ensures reliable operation, optimized energy consumption, and maximum production efficiency under varying working conditions. The machine has been designed to simplify maintenance and reduce service time. Easily accessible maintenance points, replaceable wear parts, and a practical machine layout enable fast inspections and servicing. In addition, safe access platforms and user-friendly adjustment systems contribute to reliable operation while minimizing downtime. Technical Specifications: Bjdpfx Ajzh Ixhem Tswr Capacity: 40–80 t/h Maximum Feed Size: 50 mm Drive System: Electric For more technical information about the FABO FSHC-1410 Mobile Hammer Crusher, please visit our website or contact our sales team. We will be pleased to assist you in selecting the most suitable crushing solution for your project requirements.

Condition: like new (used), Year of construction: 2020, For sale is a demonstration machine: Hammer K3Winner Comfort panel saw with a cutting width of 300 mm. The machine was only briefly used for demonstration purposes in-house and can thus be considered as new, with full warranty/guarantee. Technical specifications: - Sliding table 2000 mm - Extension table 1100 mm - Mitre fence 1300 mm - Angle stop index - Saw blade tiltable 90–45° - Max. cutting height 104 mm with 315 mm saw blade diameter - Cutting width 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2020 The panel saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, panel Reference: R-D1618-10 Bedpfx Aoy Akdrjm Tewr

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. Bedpfx Amswf Anhs Tjwr 4 for sale. 1 piece/300 EUR. Good working condition. Please check out our other listings as well.

Year of construction: 2013, condition: like new (used), functionality: unexamined, machine/vehicle number: 130365 bis 130368, The heating units were acquired as part of a package in conjunction with a machine takeover from VW/Dieffenbacher and are not required. It is assumed they have very few operating hours (previously used in a laboratory setting). Bjdjx An Eqjpfx Am Towr

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm - Motor power: 3 kW - Extractor connection Ø 120 mm - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Bwsdpfx Asx U U Ekom Ter Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Reference: R-A0117

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 1150 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. Technical data: - Cutting length: 1250 mm - Cutting width: 900 mm - Cutting height: 103 mm - 4 spindle speeds - Directional switch - 3-knife cutter block - Planing length: 1400 mm Bsdpfx Ajxdknwjm Towr - 3 motors, each 3 kW - Year of manufacture: 2020 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thickness planer, thicknessing machine, circular saw Reference: R-B18YQ

Condition: like new (used), For sale is a Hammer edge sanding machine HS950, with a belt length of 2515 mm. The machine is in good condition and has been inspected by our specialist staff. - Belt length: 2515 mm - With oscillation motor Bedpjw Hf D Iofx Am Tswr - Tiltable 0 - 90° - Motor power: 2.2 kW / 3 HP - Year of manufacture: 2024 - Demonstration machine The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: edge sanding machine, sanding machine, surface finishing Reference: R-A0117

Condition: like new (used), Year of construction: 2023, For sale is a demonstration unit Hammer K3 Winner Comfort panel saw with a cutting length of 2000 mm. The machine is in mint condition. Technical data: - Sliding table: 2000 mm Bwsdpfovxrurjx Am Tor - Outrigger table: 1100 mm - Mitre fence: 1300 mm - Angle indexer - Saw blade tiltable 90-45° - Max. cutting height: 104 mm with blade diameter 315 mm - Cutting width: 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2023 The panel saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, sliding table saw Reference: R-A0117

Condition: used, machine/vehicle number: G-ADHM118054aR, AD planer Hammer A3-41, year of manufacture 2019, very good condition, including reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 blades, 350 kg Bwedpfx Aovw Ebpom Tjr Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, AD planer Hammer A3, year 2018, in very good condition, hardly used, 310mm planing width, incl. 1 set of spare knives (reversible knives), 3 kW, 3 knives, 300 kg Subject to price changes, errors, and misprints. Bedpfx Amowzzfks Towr

Condition: used, 4-way combination hammer C3-31, standard equipment, 2000 mm table length, 3 knives, approx. 450 kg Bedpfx Amovr I E Ho Towr Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, machine/vehicle number: G-KF131799aH, Format circular saw milling machine Hammer B3 Winner, year of manufacture 2023, as new, standard equipment, 2x3 kW, 2000 mm table length, 500 kg Prices subject to change, errors, printing and typesetting errors reserved Bwsdpfx Ajvw Ectem Tsr

Condition: excellent (used), Year of construction: 2019, For sale is a used Hammer B3Winner Comfort circular saw and router with a cutting length of 2000 mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. (Fully functional) Technical specifications: - Circular saw and router tiltable 90-45° - Sliding table 2000 mm - Outrigger table with degree grid index - Miter stop 1300 mm - 4 routing speeds: 3000/6000/8000/10000 rpm - Cutting width 800 mm - 2 motors, each with 5.5 HP (4 kW) 400 volts - Year of manufacture 2019 Bedjv Sbpxjpfx Am Tewr The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, milling machine, combined machine, combination machine Reference: R-L0AHG

Condition: like new (used), Year of construction: 2024, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been inspected by our specialist staff and is in mint condition. Technical specifications: - Planing thickness width 410 mm - 3 knife blocks (reversible knives) Bedpfx Amev Scx Uo Tewr - Dual folding planing tables - Planer stop pivots 90-45° - Thicknessing height 4-225 mm - 5.5 HP (4 kW) motor / 400 volts - Year of manufacture 2024 - Machine number 52.02.285.24 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planer, planing, thicknessing Reference: R-L0J2U

Condition: used, AD Planer Hammer A3-31, good condition Bjdpfx Amjwzzhfs Towr Price changes reserved, subject to errors, printing and typographical mistakes.