Used Sperry Vickers Hydraulic Aggregate for sale (16,751)

Condition: good (used), Year of construction: 1996, operating hours: 4,175 h, motor manufacturer: John Deere, overall weight: 5,400 kg, machine/vehicle number: L06900V178902, JOHN DEERE 6900 MW2 Tractor YEAR 1996 Engine Type John Deere 6068 TL002 Power [HP] 130 Maximum torque 603 Capacity [cm3] 6786 Number of cylinders 6 Injection system Mechanical Cooling type Liquid Drive system Gearbox Mechanical Powershift Front-wheel drive engagement Electro-Hydraulic Number of forward gears 20 Number of reverse gears 12 Changing the direction of travel (reverse) Hydraulic Main clutch PermaClutch Maximum speed 40 Drive 4x4 Drive system Steering system Hydraulic Aggregation systems Lifting capacity TUZ 6840 TUZ Category II III External hydraulic output 60 Number of external hydraulic outputs 6 PTO - type Independent PTO - engagement Gsdjvx N Enjpfx An Ijug Electro-hydraulic PTO - speeds 1000 540 Dimensions - weights Length without ballast 499 Height with cabin 288 Width 265 Weight without ballast 5390 Turning radius 10.24 S015202 AVAILABLE IMMEDIATELY

Condition: used, Year of construction: 1997, functionality: fully functional, clearance between the columns: 480 mm, total height: 2,040 mm, total width: 1,750 mm, stroke length: 460 mm, total length: 5,177 mm, column diameter: 90 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 9,500 kg, clamping force: 2,000 kN, power: 18 kW (24.47 HP), input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used Italpresse IP 200 SC die-casting machine, manufactured in 1997. Type: IP 200 SC Manufacturing number: 2449 Year of manufacture: 11.1997 Wiring diagram no.: 147081052 Operating voltage: 400 V Mains frequency: 50 Hz Auxiliary power supply: 110VAC–24VDC Control voltage inputs: 24 VDC Control voltage outputs: 24 VDC Power consumption: 18 kW Installed power: 23 kW Enclosure protection class: IP55 Hydraulic pump: Vickers 4525V42A17 – 86DD 22R Pressure accumulator TÜV certificate: Last inspection in 2018, next inspection due on 01.08.2028. Gusdpozlw N Rsfx An Ijg In recent years, extensive investments have been made in the technology to ensure reliability: 2024: Installation of a new column including nut. 2023: Replacement of various wear parts (column wiper, slide rails/slide shoes including wiper) as well as complete seal kits for the closing cylinder and multiplier. 2021: Installation of new pump inserts for high and low pressure. The machine will be sold including a Gauss VS1 dosing unit with a separate, compact control panel and a gas-operated melting furnace with a 200-liter crucible and a Hindenlang gas burner (type HO-3). Original manual and complete electrical and pneumatic diagrams are available. The machine is currently still in active production. Since it is in operation, the operating hours cannot be read exactly, but an inspection under power is possible at any time by arrangement. The machine will be disconnected at the end of September / beginning of October. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2011, functionality: fully functional, operating hours: 1,000 h, input voltage: 380 V, type of input current: three-phase, pressing force: 1,200 t, stroke length: 600 mm, table width: 3,000 mm, table length: 2,000 mm, table height: 700 mm, ram plate width: 800 mm, ram plate length: 600 mm, distance table to ram: 700 mm, oil tank capacity: 700 l, total length: 2,000 mm, total width: 3,000 mm, total height: 4,200 mm, overall weight: 60,000 kg, control cabinet height: 2,000 mm, control cabinet width: 400 mm, distance between stands: 2,200 mm, Equipment: safety light barrier, H-frame, 4 columns, daylight 700 mm, stroke 600 mm, distance between columns 2200 mm x 1260 mm, dimensions (LxWxH) 3000x2000x4200 mm, 380V-15kW, weight 60,000 kg Gsdpfx Asxn Rvcon Ieug

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 7,240 h, Terex-Pegson 1100×800 (Pegson 1180) Year: 2007 Hours: 7,240 h Well-maintained Terex-Pegson 1100×800 jaw crusher, also known as Pegson 1180. The machine has been operated by a single owner since it was new and remains in very good working condition. Technical specifications: Feed opening: 1100 × 800 mm Hydraulic CSS adjustment: 90–150 mm CAT C13 engine Hopper capacity: 9.1 m³ Grizzly feeder Side conveyor Operating weight: 56,000 kg Additional equipment: Spare jaw plates included Gujdezdq Nhepfx An Ieg Main advantages: Single owner since new Very good technical condition Reliable CAT C13 engine Large feed opening for high productivity Suitable for quarrying, recycling, and aggregate production Fast access to spare parts Financing available. Export documentation can be arranged. Machine available immediately. Inspection possible in Poland. Worldwide delivery available.

Condition: excellent (used), functionality: fully functional, working width: 4,000 mm, sheet thickness (max.): 5 mm, number of support arms: 3, Equipment: CE marking, For Sale; 1 used 4metre Gade guillotine c/w non magnetic rear sheet support The G.A.D.E. CO 40/4 is an Italian-made hydraulic guillotine sheet metal shear from the manufacturer's "Business" series. It features a robust monolithic welded structure designed for precise, straight cuts in metal fabrication workshops.  Machine Specifications Cutting Length: 4050 mm / 4metre Maximum Cutting Thickness: 4 mm (often rated up to 4/5 mm depending on material tensile strength) Build: Heavy-duty electro-welded monolithic frame, precision-machined for structural rigidity Operation: Hydraulic shearing system with integrated backgauge and control support (such as TRIA CNC configurations on select variants) / front operated powered back gauge Non magnetic rear sheet support ideal for your light / thin gauge steel cutting Guodpfx Aoztczhsn Iog

Condition: used, BYSTRONIC VR 13-31, 3M X 13MM CAPACITY Gusdpfx Aezh Rd Ton Iog

Condition: used, feed pressure / bar liter capacity / l Gsdpfx Ajzcgipen Ijug power capacity 5,5 kW

Condition: as good as new (ex-display), Type: PVXS-180-M-R-ES-0000-000 Part number: 8005062705C010 Design: open-circuit variable-displacement axial piston pump Control: electric displacement control Rotation: clockwise Displacement: maximum 180 cm³/rev Speed: maximum 1,800 rpm Rated pressure: 350 bar Gujdpfx Aezvd S Tsn Iog Maximum pressure: 420 bar Theoretical flow: maximum approximately 324 l/min Control motor: Georgii Kobold KOD 346-1A MB/S64 Control motor: 0.09 kW, 230/400 V, 1,400 rpm Brake: MB3, 2 Nm, 230 V, 15 W Gearbox: SPN Schwaben Präzision GF71 Condition: unused surplus unit, stored in a wooden transport crate

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss Guodszd Uv Eopfx An Iog 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: excellent (used), Year of construction: 1998, AMADA MODEL GPN 630 HYDRAULIC SHEAR PNEUMATIC REA SHEET SUPPORTS ELECTRONIC REAR SAFETY GUARD Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 2.0 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORTS SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER Gusdpfx Anoyypb Ro Ieg BLADE GAP AND RAKE ANGLE ADJUSTMENT ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE PNEUMATIC SHEET SUPPORTS HOUR COUNTER AUTO-DIAGNOSTICS

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine Gujdpfx Anszh Uzco Isg - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport -Hidraulic aggregate 200 bar 2 A+B -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Gsdpfx Aoi Akrkon Isug Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: ready for operation (used), functionality: fully functional, pressing force: 100 t, stroke length: 250 mm, table width: 600 mm, table length: 1,000 mm, ram plate length: 300 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: 100 t Maximum stroke: 250 mm Press model: Workshop press Press design: Single-acting Table length: 1,000 mm Table width: 600 mm Table bore diameter: 140 mm Ram length: 300 mm Ram width: 300 mm Height adjustment: 250 mm Guedpszza Uhofx An Iog Column spacing, length: 2,000 mm MACHINE DETAILS Drive system: Conventional Transport packages: 3 pieces Transport weight: 8,000 kg

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel Guodpfxev Dm Epo An Ieg 230 Volt Power Supply Price € 3,950

Year of construction: 2016, condition: reconditioned (used), press aggregate with 2 hydraulic press arms Gedpfx Ajd Dcmqen Ioug around the glued board slats in the mechanical press offset free to press. (instead of using a big hammer or big weights on the crane hook)

Condition: excellent (used), Ideal/EBA cutting machine! In excellent condition, available for inspection and testing at our location. All the equipment mentioned is not for sale or resale in Russia, or in any country subject to an EU embargo. Gusdpfx Anjy Uhlqj Isg

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,929 h, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details. • Tool magazine: 60-station, HSK-A63 • Rotary table: KESSLER rotary table, Ø 500 mm • Spindle air blast: Air through the spindle • Internal coolant supply: 20 bar, with belt filter unit • Coolant system: Automatic coolant level monitoring • Media supply: 3-channel media supply at table center • Handwheel: Mobile electronic handwheel • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe); workpiece measuring preparation included • Viewing: Rotation viewing window included • Collision monitoring: POS DCM collision monitoring module • Condition: Top condition • Hours: 6,929 • Accessories note: Without tool holders and without quick clamping system Additional equipment • Oil mist separator: Electromechanical • Hydraulic unit: Hydraulic aggregate, M-function controlled Gusdpfx Aeyir Dxjn Ijg Technical Specification Taper Size HSK 63

Condition: excellent (used), Year of construction: 2009, operating hours: 8,100 h, AMADA PROMECAM MODEL HFE 5020 50 TONS CAPACITY X 2000 year 2009 specification 7 AXIS CNC HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 50 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2000 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO.V090090 GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC Guedpfxezn Afvs An Ijg SIDE INTERLOCKED FENCING REAR INTERLOCKED year 2009 price POA specification

Condition: excellent (used), Year of construction: 2024, machine/vehicle number: 82676, power: 5.5 kW (7.48 HP), UNIFLEX Ux_0875_SC12i_C.2_FD hydraulic press with Siemens SIMATIC HMI, serial number 82676, and manufactured in April 2024. Details: Brand: UNIFLEX Type: Ux_0875_SC12i_C.2_FD Serial number: 82676 Year of manufacture: 2024/04 Control: Siemens SIMATIC HMI Maximum hydraulic pressure: 350 bar Electrical connection: 1N 3P+PE, 230/380-420 and 230/380-480 VAC Current: 13.0/21 A Frequency: 50/60 Hz Power: 5.5 kW Duty cycle: S6-70% Equipped with a main switch and emergency stop Gsdpfx Ajz Ah Hben Ioug Supplied on a wooden pallet.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling Guodpfxoyzgp Uj An Ieg -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 320 rotary table -HIWIN RTS 320 suport -Hidraulic aggregate 200 bar 3 A+B -4th axis fixture support hydraulic (4x oil, 4x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H21202X02430, Year of construction: 2020, operating hours: 9,844 h, load capacity: 2,000 kg, lifting height: 4,030 mm, fuel type: gas, mast type: simplex, construction height: 2,687 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,030 mm Overall height: 2,687 mm MACHINE DETAILS Mast type: Simplex ISO class: 2 ISO class load capacity: 1,000–2,500 kg Guedpfx Aszy U R Ijn Ieg Fuel type: Gas Operating hours: 9,844 h EQUIPMENT Side shifter 3rd hydraulic valve Heater Full cab External reference: SL13535SP

Condition: excellent (used), Year of construction: 1998, Great opportunity! Weber rescue set, first owner, in top condition, with cutter and spreader. From the former inventory of the town of Harsewinkel, we can offer you this top-maintained rescue set from the world-renowned brand "Weber," first owner! The E45L unit was put into service by the town of Harsewinkel in 1998, along with the S 130 rescue cutter and the SP 30 LS spreader. The rescue set was used only sparingly, inspected annually until 2026, and decommissioned in 2026 due to a new acquisition. All devices are in excellent optical and technical condition, have no significant damage, and only show minor scratches or other normal signs of wear, which, however, do not in any way restrict the use of the devices – see pictures! The cutter has a damaged blade – a new blade is included! Pressure: 630 bar Power supply: 230 volts All devices are equipped with single couplings. 1 EURO 120x80x80cm, approx. 100 kg Gusdpfx Anez Atnqj Ijg Pickup during our regular business hours. Please arrange an appointment! Shipping via a freight forwarder is possible for an extra charge. The sale is exclusively for commercial businesses. You will receive an invoice without VAT, as the item comes from a public institution. Private buyers have the option to purchase the device "on behalf of a customer"; a direct commercial sale to private individuals will not take place! The goods are sold with the exclusion of any warranty or liability for defects. This exclusion does not apply to claims for damages resulting from gross negligence or intentional breach of the seller's obligations, as well as to any injury to life, body and health. For questions regarding prices or technical details, please do not hesitate to contact us at the address provided.

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity forklift: 2,500–5,000 kg Fork length: 1,350–2,000 mm Mounting: FEM 3A MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 800 x 1,000 mm Net weight: 250 kg EQUIPMENT Hydraulic telescopic forks For loading onto a pallet for truck loading All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Gsdpozz H A Ejfx An Ijug Lot number: 1103

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4079, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 30 t, stroke length: 500 mm, table width: 1,200 mm, table length: 1,000 mm, table height: 850 mm, ram plate width: 600 mm, ram plate length: 400 mm, distance table to ram: 800 mm, oil tank capacity: 400 l, total length: 2,200 mm, total width: 2,400 mm, total height: 3,500 mm, overall weight: 4,000 kg, year of last overhaul: 2023, Equipment: CE marking, safety light barrier, For sale is a hydraulic double-column press. Manufacturer: Hans Schoen, Type: NH/D 30S. The machine is in perfect working order and can be inspected while powered on. Gusdpszzd Rgjfx An Iog

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Gedpfx Aeyw Aa Ujn Ijug Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.