Used Ums Comfort 2003 for sale (7,814)

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Knedpfx Aozuykvechsb Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: good (used), Complete control block. Input: 24 VDC Output: 24 VDC Application: Originally from a glass processing machine manufactured by Lisec Width: 615 mm Knjdpfx Aey I Td Sechsb Height: 150 mm Depth: 70 mm Weight: 3.0 kg Condition: good, second-hand

Condition: used, Siemens SIMATIC HMI TP1200 Comfort Panel 12" 6AV2124-0MC01-0AX0 Quantity: 2 units available Manufacturer: Siemens Product series: SIMATIC HMI Comfort Panel Type: TP1200 Comfort Article number: 6AV2124-0MC01-0AX0 Display: 12" widescreen TFT Operation: Touchscreen Colors: 16 million Interface: PROFINET Additional interface: MPI / PROFIBUS DP Project memory: 12 MB Operating system: Windows CE 6.0 Can be programmed with: WinCC Comfort V11 Kjdpfjzxq Iaox Achjnb

Condition: used, mileage: 313,000 km, power: 338 kW (459.55 HP), first registration: 03/2003, fuel type: diesel, overall weight: 30,000 kg, brakes: retarder, color: black, gearing type: automatic, loading space length: 9,380 mm, loading space width: 2,480 mm, loading space height: 3,300 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, MAN TGA 18.463 Retarder, Refrigerator, Automatic Transmission For inquiries: 0726565 * Condition: Very good * Power: 338 kW / 463 hp * Displacement: 12,816 cc * Retarder * ABS Knodpfxozlvgns Achjb * ASR * ESP * Differential lock, rear axle * Exterior mirrors and wide-angle mirrors, electrically adjustable and heated * Storage compartment above driver / center / passenger * Air horns on cab roof * Electric sunroof * 2 sleeping berths * Auxiliary heater * Automatic climate control * Pull-out refrigerator under berth * Air-suspended comfort driver's seat * Electric retractable sun visor * Transparent exterior sun visor * Fog lights * Electric windows Tires: Front axle: 385 / 65 R22.5, 35% leaf-sprung Rear axle: 315 / 80 R22.5, 40% air-sprung Berdex OV 1218 | Car transporter | Mobile workshop | Team lounge | LBW Internal number for inquiries: 0726566 * Condition: Very good * First registration: 04/2003 * Aluminum work platforms on the left and right * Permissible total weight: 30,000 kg * Tare weight: 10,420 kg * ABS * EBS * 2-axle air suspension * Interior lighting * 2 refrigerators * Lift tailgate with ramps Dimensions (loading area / cargo space) Loading area length: 9,380 mm Loading area width: 2,470 mm Loading area height: 3,300 mm Lounge / meeting room * Seating area and lifting table * Air conditioning - Fujitsu * TV * Sunroof / glass version Interior dimensions Length: 3,100 mm Width: 2,480 mm Height: 2,070 mm ---- Price: 59,900,- Euro + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and...? Typographical errors, errors and prior sale reserved.

Year of construction: 2003, condition: good (used), functionality: fully functional, Highly Automated CNC Pipe Bending Cell: Rosenberger RB20 Typical Applications The RB20 series is designed for the cold bending of pipes with one or more bends. It is used in industries such as the automotive industry, furniture manufacturing, and plant engineering, where precise, repetitive bends are required. Kedpfx Acezz Hn Ishenb Technical Features and Function Type: ROSENBERGER RB20 (manufactured in 2003) Performance & Geometry: Servo-electric precision drive with a cold bending capacity of up to Ø 20 x 1.5 mm in steel. High flexibility thanks to freely selectable bending planes within the 78 mm die height and generous 3-axis travel ranges (X/Y/Z: 260 × 146 × 1,170 mm) Control Technology: The logic is managed by a robust Siemens Simatic S7-300 PLC, paired with an industrial operator panel from B&R Robotic Automation: Fully automatic handling (loading/unloading) via an integrated Motoman industrial robot, complete with XRC controller and the corresponding teach-in terminal for path programming. Product removal is carried out reliably via a discharge conveyor belt. Marking system (upgraded in 2021): A modern, high-performance VideoJet 1860 inkjet coder (manufactured in 2021) with microprocessor control enables direct product marking (e.g., lot numbers or barcodes) immediately after the bending process System Safety & Peripherals: CE-compliant safety measures via a SICK safety light curtain and a perimeter safety fence. Optical status indication via R

Condition: used, mileage: 621,643 km, power: 345 kW (469.07 HP), first registration: 11/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Renault T 460 Comfort 6x2 Sleeper Cab BDF VIN: D001824 Without body! Chassis / Components: Wheelbase: 4,800 mm // 1,350 mm * Full air suspension * Lift axle * Tires: 315/70 R22.5 * Remaining tread depth: Front: ~60/70%, Middle: 50/40%, Rear: 0/20% * 2 x Aluminum fuel tank * 1 x AD-Blue tank * 2 x PVC storage box * Spare wheel holder * Fixed trailer coupling Cab: * Sleeper Cab, Tunnel 200 mm * 1 x Bed * Sunroof * Automatic climate control * CD radio * AUX, USB * Hands-free system * Auxiliary heater * Cruise control * Distance control * Lane departure warning system Body: * BDF body * Body length: 7.10 m Engine / Transmission: 470 hp // 345 kW // 10,837 cm² // Euro 6c * Engine brake * Optidriver // Automatic * Differential lock Weights: Gross vehicle weight: 26,000 kg * Unladen weight: 9,560 kg * Payload: 16,440 kg Other: * German vehicle * Next inspection: 03/2027 ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & typographical errors, changes, prior sale and errors reserved!----Who are we? Kodpfjz A Iz Aox Achjnb Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on an area of 11,000 m². Our company philosophy is characterized by fairness and integrity. As we are very concerned about customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day registration plates / export license plates We will gladly help you with the procurement of export license plates / short-term license plates. Handling customs formalities We will gladly help you with the handling of customs matters.

Condition: used, mileage: 621,643 km, power: 345 kW (469.07 HP), first registration: 11/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Renault T 460 Comfort 6x2 Sleeper Cab BDF VIN: D001824 Without body! Chassis / Components: Wheelbase: 4,800 mm // 1,350 mm * Full air suspension * Lift axle * Tires: 315/70 R22.5 * Remaining tread depth: Front: approx. 60/70%, Rear: approx. 50/40%, Steer axle: 0/20% * 2 x Aluminum tanks * 1 x AD-Blue tank * 2 x PVC storage boxes * Spare wheel holder * Fixed trailer coupling Cab: * Sleeper Cab, Tunnel 200 mm * 1 x Bed * Roof hatch * Automatic climate control * CD radio * AUX, USB * Hands-free system * Auxiliary heater * Cruise control * Distance control * Lane departure warning system Body: * BDF body * Body length: 7.10m Engine / Transmission: 470 hp // 345 KW // 10,837 cm³ // Euro 6c Knsdpoz A I Aaefx Acheb * Engine brake * Optidriver // Automatic * Differential lock Weights: Gross vehicle weight: 26,000 kg * Unladen weight: 9,560 kg * Payload: 16,440 kg Other: * German vehicle * Valid MOT until 03/2027 ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer plates, and we can also arrange for the delivery of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing and typographical errors, changes, prior sale, and mistakes reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on an area of 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organizing special transports We will gladly assist you in organizing special transports. Day passes / export plates We will gladly assist you in obtaining export plates/short-term plates. Processing customs formalities We will gladly assist you in handling customs matters.

Condition: used, Year of construction: 2003, Overview This Kettner Blitzpac Junior E 3T bottle packer, manufactured in 2003, is designed for the automatic packing of PET bottles into beverage crates. The machine is configured for the 20 x 0.5 l crate format and is equipped with 4 packing units, each with 4 x 5 positions, matching the required 20-bottle crate layout. The system uses an automated gripper head / matrix gripper assembly to pick bottles from the conveyor lanes and place them into crates. The machine includes stainless steel lane guides, modular chain conveyors, SEW-Eurodrive gearmotors, pneumatic components and safety guarding with protective fencing and transparent panels. The machine is identified as Kettner Junior E 3T / Blitzpac Junior E 3T. Technical Data - Manufacturer: Kettner GmbH / Krones Group - Machine Type: Bottle packer / crate packer - Model: Blitzpac Junior E 3T - Year of Manufacture: 2003 - Application: Packing of bottles into crates Knsdpfx Acozbg T Eshjb - Format: 20 x 0.5 l crate - Configuration: 4 packing units, each with 4 x 5 positions - Gripper System: Pneumatic matrix gripper for bottle handling - Conveyor System: Modular chain conveyor with stainless steel lane guides - Drive System: SEW-Eurodrive gearmotors - Safety: Protective fencing, transparent guarding, safety / sensor equipment - Electrical Supply: 230 / 400 V AC - Current Type: 3-phase - Frequency: 50 Hz - Nominal Current: 13 A - Condition: Used, installed in industrial bottling environment

Condition: used, Year of construction: 2003, Overview This Krones Blitzpac case packer, manufactured in 2003, is designed for the automatic packing of PET bottles into crates. The machine is configured for handling of 1.0 l PET bottles, packed into 12-bottle crates. The machine has a stated design capacity of approx. 2,700 crates per hour. Product handling is carried out by a mechanical / pneumatic matrix gripper system, which lifts multiple rows of bottles and places them into crates. The machine is fully enclosed with transparent safety guarding. Operation is controlled via an integrated MTS 10 HMI panel, with physical push-buttons and emergency stop. Technical Data - Manufacturer: Krones AG - Machine Type: Blitzpac case packer / bottle packer Knsdpfszb Aghex Acheb - Machine Description: Blitzpac Einpacker 23 Year of Manufacture: 2003 - Application: Packing of PET bottles into crates - Pack Format: 12-bottle crate - Capacity: approx. 2,700 crates/hour - Control / HMI: MTS 10 operator panel - Bottle Handling: Mechanical / 7pcs. pneumatic matrix gripper for multi-row bottle handling - Condition: Used, observed in industrial production environment

Condition: good (used), Year of construction: 2003, functionality: fully functional, JOCAR JMT-700 Debarker Year of manufacture: 2003 Technical condition: good – machine fully operational Ksdpoz Dxpyofx Achonb Debarker for logs with diameters from 130 to 700 mm.

Condition: ready for operation (used), Counter Stackers Palamides Alpha 800 -2003 Knedsir A Nyjpfx Achjb

Condition: used, Year of construction: 2003, Maximum pushing speed 120 mt/min Blade diameter 500/550 mm Worktop height 900+-20 mm Compressed air consumption 1200 nl/min 6 atm Minimum installed power 10 kW Ksdpfozqg R Ijx Achjnb Suction air velocity 2000 m3/h 45 mt/sec Output with 8 ejectors

Condition: used, mileage: 19,700 km, power: 75 kW (101.97 HP), first registration: 11/2003, fuel type: diesel, next inspection (TÜV): 01/2027, color: beige, gearing type: mechanical, emission class: euro3, number of seats: 5, Equipment: ABS, all wheel drive, central locking, immobilizer system, parking heater, First owner. Only 19,700 total kilometers driven since new. Comes with service booklet. Last service in 2025 at 17,983 kilometers. Engine, transmission, and rear axle oil changed. Timing belt replaced. Tires also replaced at the same time; fitted with Semperit winter tires, DOT 2023/2024. Manufactured in February 2003 and first registered in November 2003. One of the last T4 Syncro models built. Long wheelbase. Ksdpfeyyfr Ssx Achsnb Originally, it was technically intended for factory installation to be registered as a standard passenger vehicle with 9 seats. However, this registration was immediately removed from the original vehicle registration document because the vehicle was always used as an operational vehicle. The actual registration type has always been "Other motor vehicle, water rescue operational vehicle." Currently, 5 seats are registered and actually present; all are robust and easy-to-clean synthetic leather seats. SORTIMO shelving is installed in the rear, which has been used for emergency equipment and clothing. Unladen weight according to documents: 2270 kg. Permissible total weight: 2890 kg. Overall dimensions of this VW T4: Length 5107 mm / Width 1840 mm / Height with special signals 2100 mm (without the flashing lights, it is 1920 mm). Sliding door on the right and rear wing doors. Dent on the lower left rear. All doors function smoothly and without noise. WEBASTO AirTop 3500D auxiliary heater. Ball hitch with 2000 kg towing capacity (braked) or 750 kg (unbraked). Maximum towing weight = 4500 kg. 2.5-liter TDI five-cylinder diesel engine. 2461 ccm. 102 hp. AXL. Starts immediately and runs perfectly. 5-speed manual transmission. Differential lock. ABS. Power steering. Airbags for driver and passenger. Central locking with remote control. 2 original VW keys with remote control are included. Electric windows and electrically adjustable exterior mirrors. 155 km/h is listed as the maximum speed. The T4 was recently driven to us without any problems over 600 kilometers on the highway. It runs excellently and is in good original condition. The TÜV (technical inspection) is valid until 01/2027. This offer is only valid for commercial businesses and freelancers of all kinds, as well as for authorities / emergency services. Unfortunately, sales to private end consumers are not possible. Subject to prior sale and errors. Price according to §25a UStG (differential taxation; VAT cannot be shown separately and is not added). The Syncro is available immediately.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, total width: 1,200 mm, total height: 2,100 mm, total length: 1,700 mm, overall weight: 310 kg, inner dimension width: 740 mm, inner dimension length: 1,000 mm, inner dimension height: 770 mm, Equipment: lighting, Auer ST 1000 J Blasting Cabinet / Blasting System – Year of Manufacture 2003 Technical Data: Manufacturer: Paul Auer GmbH Knodpfx Acsz Drfuohsb Model: ST 1000 J Year of Manufacture: 2003 Machine Number: 3440 Blasting Chamber: approx. 1,000 × 770 × 740 mm External Dimensions: approx. 1,700 × 2,100 × 900 mm Load Capacity of Working Grate: 200 kg Blasting Gun: SPA 80 Air Nozzle: 4.0 mm Blasting Nozzle: 11.0 mm Compressed Air Consumption: approx. 0.73 m³/min at 4 bar Electrical Power: 1.0 kW Weight: approx. 310 kg

Condition: used, mileage: 139,731 km, power: 100 kW (135.96 HP), first registration: 01/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,710 mm, loading space width: 1,770 mm, loading space height: 1,925 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, Please call us at WhatsUp/Viber also) E-mail: The vehicle is from our own fleet, with a fully verifiable service history. Main equipments includes: Bluetooth, Multimedia system,Multifunction steering wheel, cruise control, rear parking sensor, electric mirrors and windows etc. Kjdpoz A Ndrjfx Achjnb

Year of construction: 2016, condition: used, This listing is for the 2016 Thermo Scientific MSC 1.2 Safety Cabinet Class 2. Ksdpszgv Nrefx Achonb The unit is in full working condition and ready for immediate use. Designed for reliable microbiological safety, the Thermo Scientific MSC 1.2 delivers essential personnel, product, and environmental protection. Ideal for clinical and research labs, it offers high-efficiency HEPA filtration and a sloped front window for comfortable and secure handling of biological agents. Transparency Report and Technical Audit: Power-On Test: Verified; Control panel active, interior lighting operational, and airflow/fan system engaged.

Condition: used, Year of construction: 2003, Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data - Capacity: 40,000 bph (at 0,25L) - Bottle Formats: 0.25L, 0.33L, 0,5L - Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  - Application: beer, CSD, or other beverages in non-returnable glass bottles - Hygienic design - Automated change-over  Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or Carton Palletiser | Sidel / SIG Simonazzi | 2003 | LINEAR Pallet Shrinkwrapper | Sidel / SIG Simonazzi / MSK | 2003 | ECONOTECH/TOWERTECH Pallet Labeller | Sidel / SIG Simonazzi / Logopak | 2003 | LOGOMATIC 920 II PF Basket Erector | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLA Fourpack Transport and Divider | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLW Basket Inserter | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLE Carton Packer | Sidel / SIG Simonazzi / FANUC | 2003 | ROBOKOMBI Carton Closer | Sidel / SIG Simonazzi / Bortolin | 2003 | MARA H.M Carton Marker 1 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Carton Marker 2 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Weight Checker | Prisma | 2003 | 10D3 Full Carton Inspection | BBull / Centro Kontrollsysteme | 2015 | Image VKK 500 Bottle Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Carton Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Crown Cork Feeder | Sidel / SIG Simonazzi | 2003 | SM80 Rinser | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Knodpjyb Tucjfx Achsb Filler | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Crowner | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP C.I.P. | Sidel / SIG Simonazzi | 2003 | AUTOSAN Fill Height Control | Sidel / SIG Simonazzi / Heuft | 2003 | SPECTRUM TX Tunnel/Bottle Pasteuriser | Sidel / SIG Simonazzi | 2003 | PAMA CLD 50/144 Bottle Coding on Necklabel | Mundi-Technology | 2015 | Mundiscan UP2000 HE Labeller | Sidel / SIG Simonazzi / Krones | 2003 | Topmodule Type 407 Bottle Inspection & Sorting | Sidel / SIG Simonazzi / Krones | 2003 | Checkmat type 707 Tap tone | Sidel / SIG Simonazzi / Krones | 2003 | TapTone 500 Series

Condition: used, mileage: 590,792 km, power: 338 kW (459.55 HP), first registration: 06/2003, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, total height: 4,000 mm, loading space length: 5,300 mm, loading space width: 2,500 mm, Equipment: all wheel drive, crane, Vehicle data: * Manufacturer: MAN * Type: 33.464 DFALC * Front suspension: Leaf spring * Rear suspension: Air suspension * First registration: 06/02/2003 * Engine: MAN D2876 Euro 3 * Power: 338 kW / 460 hp * Displacement: 12,816 cm³ * Drive: 6x6 all-wheel drive * Wheelbase: 3825 / 1400 mm * Internal body length: approx. 5.70 m * Internal body width: 2.30 m * Transmission: 16-speed manual transmission * Permissible total weight: 33,000 kg * Technically permissible total weight: 44,000 kg * Tare weight: 15,100 kg * Mileage: approx. 590,800 km * Top speed: 85 km/h Body: * Timber transport body * Open loading area with stakes * Rear wall made of aluminum * Rear crane LOGLIFT 135Z * Crane year of manufacture: 2000 * Reach up to approx. 9 meters * Lifting capacity according to load chart: * 4 m: 2,700 kg Knedpfszb T Rqox Acheb * 5 m: 2,320 kg * 6 m: 2,080 kg * 7 m: 1,850 kg * 8 m: 1,550 kg * 9 m: 1,060 kg Equipment: * Permanent all-wheel drive * Differential locks * Engine brake / retarder * Air brake system with ABS * Air suspension system * Rotating beacon * Additional work lights * Robust forestry and construction site body Tires: * Front axle: 385/65 R22.5 * Rear axle: 315/80 R22.5 dual tires Condition: The vehicle is in a condition appropriate for its age. The engine and drive are considered to be very robust MAN technology. Crane and body are present. The vehicle is currently de-registered. Tel./WhatsApp:

Condition: used, Year of construction: 2003, Steering wheels 700mm Guide Crank wheels in cast iron Knodpfxjzr R Dus Achob Provided with multiple blades 380V

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Manufacturer: JAESPA Knodpfxoy Ed D Dj Achsb Type: Comfort 420 A Year of construction: 2012 Storage location: Halberstadt Machine-No.: 233XXXXX Weight Of The Machine Ca.: 2500 kg Machine length: 2400 mm Machine width: 2800 mm Machine Height: 1700 mm Bending capacity square tube: 420 x 420 mm Bending capacity round bar: 420 mm Bundle min.: 215 x 65 mm Bundle max.: 420 x 170 mm Flat: 420 x 420 mm Roll diameter: 590 mm Saw band dimensions: 4100 x 1300 x 4780 mm Belt speed: 15 - 100 m/min. Operating pressure: 50 bar Flow rate: 6,5 l/min Tank capacity: 40 liter Coolant content: 50 liter Material support height: 800 mm Saw motor: 5,5 kW hydraulic motor: 0,75 kW coolant pump: 0,12 kW Chip brush: 0,09 kW Chip conveyor: 0,18 kW Measurement standard: DIN EN 23746

Condition: used, Year of construction: 2003, Overview  Knodpfx Acewiy Tvoheb This rinser-filler-capper bloc was manufactured in 2003 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in PET bottles. It includes a rinsing machine with 2 channel and an isobaric filler with integrated capper for plastic screw caps. The machine is currently available promptly, and further information is available upon request. Technical data  - Capacity: - 10,000 bottles per hour - Formats: - 1,0 l PET bottles - 0,5 l PET bottles - 0,33 l PET bottles - Working direction: - Clockwise - Rinsing system: - 36 rinsing nozzles - 2 channel rinser - With stainless steel pipes - Filling system: - Isobaric system - 36 filling valves - Capping system - Manufacturer: Arol - 9 capping heads - With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sport caps - Dimension - Approx. 4.100 x 3.000 x 4.000 mm Scope of Delivery  - Rinser, filler, capper in triblock construction - Vacuum barrier system - Stainless steel CIP cups - Cap feeding system

Condition: used, Year of construction: 2003, Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details  - Capacity: 4.000 bph  - 4 cavities - Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm  - space requirement approx. 22 m² (incl. preform feeding system) - Bottles - 1,0 l PET Kjdpfxjwizc Es Achonb - 0,5 l PET - 0,33 l PET Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor.

Condition: good (used), mileage: 92,195 km, power: 88 kW (119.65 HP), first registration: 04/2021, fuel type: diesel, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 3,100 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 5,180 mm, total width: 1,900 mm, total height: 1,930 mm, loading space length: 2,530 mm, loading space width: 1,660 mm, loading space height: 1,390 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Tinted windows - Incl. roll cover - LED lamp - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 1240 kg, Curb weight: 1705 kg, Gross vehicle weight: 2945 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Tow hitch, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: Front and rear, Tinted windows, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: White, Maintenance manual, Lighting type: LED lamp, Bluetooth, Engine power: 88 kW (118 Hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side panels, Rear step, Roof rack: incl. roll cover, Side doors: 2, Rear closure: Double door, Central locking, Seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, L1H1, 2x side door, air conditioning, navigation, PDC, roof rack, camera, tow hitch, Tire type: All-season tires Kedpfezu I Rqjx Achsnb = Additional Information = General Information Number of doors: 2 License plate: VKB-83-R Axle Configuration Tire size: 215/65R16 Brakes: Disc brakes Suspension: Coil suspension Axle 1: Tire tread left: 4 mm; Tire tread right: 3 mm Axle 2: Tire tread left: 7 mm; Tire tread right: 4 mm Weights Unladen weight: 1,705 kg Payload: 1,240 kg GVW: 2,945 kg Functional Loading area height: 59 cm Maintenance APK (Technical Inspection): valid until 04.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: 259 € per month (delivery van, 72 months); Ask for more information and conditions.

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 09103, COMANDULLI Model EDILUX 7+4 DX • Belt running direction: RIGHT to LEFT, year of manufacture 2003 #09103 • 7 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 2 pneumatic lower supports / 2 upper supports Kedszz Nfcepfx Achjnb • Water groove milling support, manual height and side adjustment • Coating support, manual height adjustment • Separate control panel on a swivel arm • Table extension console • Water trough • Machine footprint approx.: 440 x 180 cm • Infeed area approx.: 190 x 60 cm • Outfeed area approx.: 150 x 60 cm Price: • EXW at the machine location, plus VAT, subject to prior sale, no tools included, attachments & accessories in the pictures are not included with the machine/scope of supply. Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of shipping readiness Warranty • Machine sold “as is”, excluding any warranty claims Inspection possibility • at the operating site near Cottbus Availability • after delivery of the new machine in December 2026 / January 2027

Condition: used, Year of construction: 2003, operating hours: 67,400 h, functionality: fully functional, machine/vehicle number: 112258, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller model: Brother CNC-A00, total length: 2,250 mm, overall weight: 2,250 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 26, BROTHER TC-22A – 5 AXIS - Manufacturer: Brother - Model: TC-22A - Serial Number: 112258 - Year: 2003 - Machine Type: CNC Vertical Machining / Tapping Center - CNC Control: Brother CNC-A00 - Number of Axes: 5 - X-Axis Travel: 500 mm - Y-Axis Travel: 400 mm - Z-Axis Travel: 410 mm - Table Size: 650 × 400 mm - Maximum Table Load: 200 kg - Distance Table to Spindle Nose: 200–610 mm - Spindle Taper: HSK-A40 - Spindle: 1 - Spindle Speed: up to 12,000 rpm standard - Tool Magazine: 26 tools - Maximum Tool Diameter: 55 mm - Maximum Tool Diameter with Adjacent Pockets Empty: 125 mm Ksdpfezvf Najx Achjnb - Maximum Tool Length: 200 mm - Tool Change Time: approx. 0.7 sec - Rapid Traverse X/Y/Z: 56,000 mm/min - Spindle Motor: approx. 7.7 kW / 10 min rating - Power Supply: AC 200 V, 50/60 Hz - Maximum Power Requirement: 25 kVA - Rotary / Swivel Table: Installed - 5-Axis Configuration: 3 linear axes + 2 rotary/swivel axes - Chip Conveyor: Included - Coolant Treatment System: Included - Coolant / Lubricant Pump: Included - Machine Dimensions / Required Floor Space: approx. 1,671 × 2,846 mm - Machine Height: approx. 2,274 mm - Machine Weight: approx. 2,250 kg - Accessories: Storage rack and tiered cart