Used Ahrens & Bode Gmbh & Co. Beer Drive for sale (82,820)

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V Ijdpfondk N Aex Aa Ioar - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: Iedpsnfvy Usfx Aa Ioar - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping Iasdpfx Ajng Amkea Ior - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending Iasdpfxjng A R Ss Aa Isr values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: Iedpfx Aasnh R Sus Iear - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) Iaodpfeng Ax Sjx Aa Ier - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2024, machine/vehicle number: BN120XT-HA-X, JEWELliner "CUT" 120W model series "PremiumPlus" Cutting & Marking in very short working time. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Our engraving laser JEWELliner "CUT" is very usefull to cut precious metals and soft metals till max. thickness of 2.5mm. Thicker metals are possible, please contact us for more informations. More materials to cut or engrave like all metals, ceramic and some plastics, are possible. Applications can found in the jewellery ans also in other production areas. The machine dimension is very compact to integrade simple into a production area. Samples to cut: gold, silver, brass, carbon, aluminium Samples of material to mark: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.15mm character high) - round engraving (engraving on round or bowed surfaces) optional The main parts of JEWELliner "CUT" ( BN120XT-HA-X ) : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 280x200mm security glass - electrical automatic door opening - emergency button - 180° view area to the marking field - electrical z-axis for automatic focus positioning - configured engraving software Specification: - laser technology: fiber laser - outputpower CW: 120W - available frequency: 2.1 - 6300kHz MOPA - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – bigger or smaller possible - focus range: ca. 2 mm - min character high: 0.3 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save Ijdpfxjf Ul Uij Aa Isar - dimension: L850 x W660 x H680 mm - weight: ca. 80kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Year of construction: 1992, condition: used, Plate heat exchanger for milk processing Iedpfsh Eulgox Aa Ioar

Condition: good (used), Year of construction: 2011, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 643 m³/h, Good day, We hereby offer, subject to prior sale, a used baler including conveyor belt, wire tying stations, and bale chute from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical specifications were taken from the manufacturer's operating manual and brochures; we do not assume any liability for the correctness or completeness of this information. Manufacturer: HSM GmbH + Co. KG, Germany Iasdpjymmtcofx Aa Ior Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Baler dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H) Overall installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced with a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH service team

Year of construction: 2015, condition: used, Waste water neutralisation Isdpoxbqr Djfx Aa Ijar Capacity: 8 m3/h Operation / Control: Control cabinet with touch-screen display / WAGO Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Iajdpfx Asw E H E Rea Ijr Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 106546-11, total height: 3,550 mm, total length: 7,185 mm, total width: 4,720 mm, overall weight: 8,000 kg, The drilling method used by the deep hole drilling machine is single-lip gun drilling. Drilling Unit Information: - Number of spindles: 1 - Spindle speed, infinitely variable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one pass, no retraction required) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: 40 mm - Max. thread cutting: M27 - Milling material removal rate: 250 ccm/min Travel Paths: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steadies) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep drilling oil Iodpfxsxdm Awo Aa Ijar - Tank capacity: 1,200 liters - 1 x scraper-belt chip conveyor - 1 x screw conveyor system - 1 x hydraulic unit and pneumatic unit/equipment - 1 x central lubrication system - 1 x submersible pump: Pump delivery: 200 l/min - 1 x low-pressure pump: Pump delivery: 100 l/min Drive power: 2.2 kW - 1 x compact band filter: Filtration rate: 175 l/min For machining steel and non-ferrous metals - 1 x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1 x air cooler (heat exchanger): 22.5 kW - 1 x oil mist extraction unit: Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine comprising: - Tool magazine with intermediate gripper - Tool holder SK 40 - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Number of tool storage positions: 80 - 2 x swiveling tool steady rests for guiding and supporting long drilling tools, with automatic positioning to home position. Clamping Table with B-Axis and NC Rotary Table: - Length / width: 800 x 600 mm - B-axis: 360° - Positioning accuracy, B-axis: +/- 30 seconds - Table travel: 800 mm - Payload (centered): 1,500 daN Electrical Equipment Information: - 1 x CNC control system, Heidenhain iTNC 530 - 1 x drilling process monitoring - 1 x RENISHAW touch probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: Iaodpfxjwh Rp Eo Aa Isr - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, lifting height: 10,000 mm, battery voltage: 48 V, empty load weight: 9,000 kg, General information: The HUBTEX 2125-PU/SO with model MQ 40 is an electric multidirectional sideloader with a load capacity of 4 tons and a cross-seat cabin. This forklift is suitable for warehouse areas where maximum flexibility and maneuverability in narrow aisles are required to handle loads of up to 4000 kg. M = Multidirectional steering Iajdpox Aqaqofx Aa Ier Q = Cross-seat cabin 40 = 4,000kg 2125 = Series PU = Vulkollan tires SO = fork tilting and lowering, extendable forks to 1500mm, hydraulic fork width adjustment Additional equipment/modifications: - Camera system on the right and left of the forks, with monitor in the cabin - Positioning lasers on the right and left of the forks - Soft-stop feature when lowering the forks and when crossing the telescopic fork extension steps

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Precision winding machine for films and web materials. Designed for consistent unwinding, guiding, and rewinding of roll materials. Integrated safety system with protective glazing, laser start position indicator (green), emergency stop switches, and pneumatic film guiding. Machine frame made of steel, electrically controlled drive. Ideal for production lines in coating or laminating technology. Isdpfxoxzuiys Aa Isar

Condition: excellent (used), Stations/Equipment: Iaodoxzufhepfx Aa Isr Unwinder Rewinder Extraction system incl. shredder (4x Lundberg Type WT200-200U - year 2018) Inert enclosure Busbar laminating unit Cutting units Laminating units / adhesive application units Heated rollers Master computer Control cabinets Drive motors Gantry crane Corona treatment

Year of construction: 2021, condition: new, Aluminum flat conveyor belt without substructure conveyor belt length: 4000mm drive roller: knurled deflection roller: crowned overturned Our core competence is to supply the customer exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and deliver corresponding systems from our own production. Please contact us by phone to find a suitable solution for your application. PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC white FDA compliant according to EU10/2011 Belt width 500mm outside corrugated edge welded on both sides 40mm high T-30 cleats- 400mm pitch * antistatic due to threads in the fabric of the running side endless welded with stepped finger joint food certificate is supplied Iaodpfx Aehfwcboa Ior V2A stainless steel carpet pad plate full surface drive: motor approx. 1,1KW * optional controllable with frequency converter connection 220/400V

Condition: used, Year of construction: 2018, functionality: fully functional, volume flow: 10.2 m³/h, input voltage: 230 V, USED VACUUM PUMP Technical data Iaodow Rqx Depfx Aa Ier Max. pumping speed 50 Hz (mbar) 8.9 m3/h Max. pumping speed 60 Hz (cfm) 6.0 cfm Ultimate vacuum 2 x 10-3 mbar / 1.5 x 10-3 torr Ultimate vacumm with gas ballast 1 x 10-2 mbar / 0.75 x 10-2 torr Ultimate partial vacuum without gas ballast 4 x 10-4 mbar / 3 x 10-4 torr Water vapor tolerance 40 mbar / 30 torr Number of stages 2 Permissible ambient temperature range (operation) 15 - 40 °C Permissible ambient temperature range (storage) -10 - 60 °C Max. outlet pressure (abs.) 1.1 bar Oil capacity min./max. 0.45 / 0.85 l Inlet connection small flange KF DN 25 Outlet connection small flange KF DN 25 Rated motor power 0.30 kW Rated speed 50/60 Hz 1500/1800 min-1 Protection class IEC 60529 IP 40 Dimensions (L x W x H) 503 mm x 156 mm x 240 mm Weight 24.8 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) - 52 dBA NRTL certification - No

Year of construction: 2021, operating hours: 60 h, condition: good (used), functionality: fully functional, machine/vehicle number: X620DM-WL, We are selling a very good endoscope. As plant engineers, we used the device for endoscopic inspection of weld seams in piping systems. It delivers excellent image quality and is very easy to operate. Unfortunately, the 2-meter probe length is no longer sufficient for our needs, so we need to sell it and purchase a new one with a longer probe. The device is only 3 years old. Details from the order confirmation: Portable Video Endoscope VTec X Series Forward or side view, white light State-of-the-art CMOS camera technology Bright high-resolution 5.5" monitor integrated into the handset Specifications: Iasdeu Ul A Nopfx Aa Ier Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Illumination: White light Front LED, 3.22 lm Side LED, 6.45 lm Camera resolution: Front: 1280 x 960 pixels Side: 1280 x 960 pixels Monitor resolution: 1920 x 1080 pixels Bending angle: ≤ 150° ±10 Bending functionality: Controlled via 4-way motorized joystick Power supply: Four Li-Ion batteries (18650) with protection circuit or via power adapter Environmental conditions, protection class, and weight: Handset: -10°C to +50°C, IP 54, 1.50 kg Probe: -20°C to +70°C, IP 67 Included in delivery: Video Endoscope VTec X620DM-WL SD-USB card reader HDMI cable Mini USB data cable including USB power adapter Battery charger including power adapter Power adapter Four Li-Ion batteries (18650) with protection circuit User manual Transport case Rigid Shaft Adapter with Handle for 6 mm Video Endoscopes Working length of shaft: 350 mm Includes mount for 1/4" tripod thread

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) Iasdou Hl R Tspfx Aa Ier AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Iedpfx Aox Ehg Tja Ijar

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16501575, volume flow: 4,800 m³/h, input voltage: 380 V, power: 2.5 kW (3.40 HP), Equipment: type plate available, The resulting dirt particles, emulsion and oil mist, as well as smoke, are captured directly at the source and passed through the individual filtration stages. The separated liquid collects at the bottom of the unit and can be returned to the machining center via the siphon. In the first filtration stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filtration stage removes the majority of fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the degree of contamination. The third filtration stage consists of a large-area HEPA filter of class H13. A consistently high filtration efficiency of 99.95% at a particle size from 0.3μ DOP is ensured here. Type testing in accordance with DIN EN 1822-1 H13 allows the filtered air to be returned to the workspace. Iasdpfxjyz Sn Ns Aa Ijr

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,600 mm, laser power: 60 W, type of cooling: air, total width: 800 mm, total height: 1,800 mm, total length: 1,700 mm, working range: 1,200 mm, warranty duration: 6 months, height adjustment type: electric, table height: 7,000 mm, table length: 4,000 mm, Equipment: cabin, Used CO₂ laser system for marking, engraving, and cutting plastics, wood, acrylic, paper, and more. Refurbished, 6-month warranty, Made in Germany. Technical Specifications - Laser source: CO₂ laser, beam source refurbished in 2023 - Peak power: 60 W - Wavelength: 9,600 nm - Cooling: air cooling - Power supply: 230 V / 50 Hz - Scanner & optics - X-Y galvo scanner with mirror mount - F-theta lens: F = 200 mm, anti-reflective protective glass - Working area: 120 × 120 mm (other lenses available on request) Machine & Work Area - Fully enclosed workstation - Dimensions (W/H/D): 910 × 255 × 200 mm - Extraction port available (extraction system not included) Control & Software - Industrial PC Marking software: - Texts, logos, variable data - Import of DXF, PLT, WMF, bitmap - Intuitive, user-friendly interface Scope of Delivery & Safety - Complete machine, workstation - 6-month warranty - CE certified, TÜV-tested Iodjyfucvspfx Aa Iear Condition & Delivery - Refurbished, technically tested Offer valid ex works plus shipping, while stocks last

Condition: good (used), Year of construction: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and a tool magazine. Features include a CRT screen and a classic push-button keyboard. 3. Electrical parameters (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not specified, but typically Fanuc 110/220 V → transformer) Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine construction Vertical CNC machining center (milling machine) with a fully enclosed housing. Worktable with grid of holes for mounting workpieces. Carousel tool magazine (visible in the photo) – most often 12, 20, or 24 tools (depending on version). Automatic tool changer (ATC). Iodpfx Aow Uab Aea Iear Z-axis operates vertically (guideway assembly and telescopic way covers visible). 5. Typical technical data (for Chiron FZ 12/15 machines from this period) (values may differ depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500 – 700 / 400 / 400 mm Table surface: 800 × 400 mm (example) Table load: 200 – 300 kg Spindle speed: 20 – 6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5 – 15 kW (depending on version) Tool magazine: 12 – 24 tools Positioning accuracy: ±0.005 mm Rapid traverse: 30 m/min (X/Y/Z axes) 6. Application Metalworking (steel, aluminum, cast iron, light alloys). 📌 General information: • Manufacturer: CHIRON, Germany • Type: CNC machining center • Control: as seen in the photo (Fanuc Series 0-M) • Automatic tool changer • Heavy-duty worktable with workpiece clamping options • Solid industrial construction 📌 Machine condition: • Used machine, in good condition • Regularly serviced • Shows normal signs of use • Fully functional 📌 Application: • High-precision milling • Machining of metal components • Single-part and batch production

Year of construction: 2016, condition: as good as new (ex-display), 1.piece .heavy duty gearboxes Make: NORD DRIVESYSTEMS Type: SK9082.1/52 1.piece Left version Shaft diameter 110 mm Shaft length 210 mm M/2 12000 Nm Iaedpsh Igwhsfx Aa Ior i123,13 Dimensions lying : Length 1200 mm width (with shaft 210 mm) 600 mm Height 600 mm Weight each : 620 Kg Like new Only test run. Can be mounted lying or standing