Used Brugger Brugger Sa38 Firewood Processor for sale (367)

Condition: new, AEG Modicon S 975 communication processor for 984 , unused, 100% functional Gbjdpfx Aoi D Tu Hobmjl

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Gedpjw Nadyjfx Abmsbl Equipment and technical data: X = 1800 mm Y = 900 mm Z = 80 mm Made from 18 mm Koskisen panels, consisting of a milling table (X-axis), a gantry (Y-axis), and a Z-axis. Milling bed in 19 mm MDF used as a sacrificial plate with guide rails and T-slot nuts for clamping. Subframe with reinforcements, filled with polymer concrete, prepared for transport with pallet truck or forklift. Mechanical set consisting of profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control set consisting of a Triple Beast, for controlling 3 axes, with Ethernet interface. Leadshine driver for the fourth motor. Four stepper motors, 5.0A, 3Nm with motor cables, as well as power supply unit with 48V, 6.7A, LED board for breakout board, ribbon cable and proximity sensors, small parts like single-core wires, wire end sleeves, control cables, heat shrink tubing, and cable lugs. Fully installed in an aluminum enclosure including electrical wiring and emergency stop. 21.5 inch built-in monitor, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, as well as mouse and keyboard, pre-installed in an ergonomic control desk. Tool length sensor for determining the length and updating the active zero offset. Special equipment: High-frequency spindle with 2.2 kW, including locknut, frequency inverter, line filter, braking resistor, and collet set. PC with 8 GB RAM and AMD processor CAD software Rhino 5.0 for creating both simple 2D data and 3D solid models Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2000, For sale is a used punching and bending center from Salvagnini. The S4 P4 is functional and ready for use. • Symmetrical bending unit Gedpfjh Dwqhox Abmebl Type: GPS Automatic device for precision bending • Programmable blank holder Type: PB.U12 Consists of a device for automatically setting the length of the blank holder tool and a segment set for the blank holder tool • Panel delivery device/buffer SAP2220.POS Motorized roller table with dimensions of 3000 x 900 mm • Software Type: JOBS4P4.DIARIO Automatic batch size management (JOBS4P4), recording of data and movements of system components (DIARIO) • Control and management system Type: MMACHNT-MICROMach CPU processor: PENTIUM INTEL II 400 MHz Operating system: WINDOWS NT Subject to change/errors in technical specifications and subject to prior sale.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 smarT.NC option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Gbedpow U Tlzjfx Abmol Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 3,460 mm, travel distance Y-axis: 1,615 mm, travel distance Z-axis: 400 mm, number of axes: 5, overall weight: 3,500 kg, spindle motor power: 11,000 W, spindle speed (max.): 20,000 rpm, This 5-axis MORBIDELLI Author X5 was manufactured in 2008. It features a working field of 3050 mm in the X direction, 1348 mm in the Y direction, and 400 mm in the Z direction. The machine is equipped with a powerful 11 kW spindle and a tool changer with 12 positions. If you are looking to get high-quality CNC wood machining capabilities, consider the MORBIDELLI Author X5 machine we have for sale. Contact us for further details. • Voltage: 400 V Gbsdpey Ndn Rofx Abmjl • Frequency: 50 Hz • Current: 48 A • Power supply: 400 V, 50/60 Hz • Power consumption: 28 kVA • Working field: X 3050 mm, Y 1348 mm, Z 400 mm • Rapid speeds: X 50 m/min, Y 45 m/min, Z 22 m/min • Drive system: ball screw in X/Y/Z axes • Pendulum processing: yes • Spindle: 5-axis Morbidelli milling spindle • C axis rotation: 640 degrees • B axis rotation: +/- 100 degrees • Inverter power: 18 kW • Tool holder: HSK 63F • Minimum distance table to spindle: 40 mm • Tool changer: rear tool room in X axis • Tool changer positions: 12 • Max tool diameter: 240 mm • Max tool length: 220 mm • Max tool weight: 8 kg • Work table: vacuum clamping system • Vacuum pressure: 3000 Pascal • Control system: NUM 1040 • Operating system: Windows XP Professional • Processor: 32-bit Pentium • RAM: minimum 256 MB • Hard disk: minimum 2 GB • Screen: 17 inch • Interface: RS232 • Air pressure: 6 to 8 bar • Air consumption: 250 NL/min • Dust extraction connection: 250 mm • Air speed extraction: 30 m/s • Machine dimensions: approx. 5300 x 2200 x 2500 mm • Required space: approx. 6300 x 4000 x 3000 mm • Safety equipment: CE-compliant protection system • Central lubrication: automatic • Drilling head: 12 + 6 spindles • Vertical spindles (Y direction): 5 • Vertical spindles (X direction): 8 • Horizontal spindles (X direction): 4 • Horizontal spindles (Y direction): 2 • Vertical spindle pitch: 32 mm • Horizontal spindle pitch: 64 mm • Drilling speed: 4000 rpm • Drilling unit power: 2.2 kW • Drilling tool holder: M10 • Pneumatic stroke: 60 mm Additional equipment • Chip conveyor (included) • Vacuum pump 250 m3/h

Condition: like new (used), Year of construction: 2023, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: IX-GN-4044-S, input voltage: 230 V, working width: 900 mm, total width: 1,000 mm, total length: 2,200 mm, total height: 1,100 mm, air pressure: 6 bar, control voltage: 230 V, ⚙️ Included: • Full conveyor systems • Integrated reject systems ( air reject ) • Stainless steel food-grade construction • Touchscreen control panels 2 off left hand - 3off right hand units , Full production capacity 60-70k per hour ✅ Condition: • Recently removed from production • Fully operational prior to removal • Clean, well-maintained units • Matching set (ideal for line integration or multi-site use) 💡 Ideal For: Gjdpfoyyl Aqjx Abmsbl • Ready meal manufacturers • Meat / poultry processors • Bakery & snack producers • Food contract packers Detects Glass / Plastic / Wood any foreign bodies 📦 Sale Options: • Available individually or as a complete package • Priority given to bulk buyers 🌍 Additional Information: • Available for UK and international buyers • Assistance with loading and logistics can be arranged • Viewing can be organised by appointment 💰 Price: Can be discussed on appointment / via email / phone (Discount available for multi-unit purchase) 📩 Contact: Craig Conway Conways Engineering Ltd Please get in touch for: • Additional photos • Full specifications • Video / demonstration • Bulk purchase enquiries Viewings Welcome for full demonstration

Year of construction: 2001, condition: used, Optical Sorter Pos. number: LTC00006746 Make: Pulsar Type: Mira B1600 Model: ALG5 LMB006 Frame: stainless steel Gbedpfehcin Rsx Abmsl Electric: 380 Volt – 50 Hz – 8 kW Water: 2-3 bar 20 litre / min Compressed air: 6-8 bar / 1.500 litre / min Features: Conveyor belt (new) 5 digital camera’s processor system air blast rejection system machine was last used for carrots as-is or tested and adjusted to customer needs

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table length: 3,700 mm, overall weight: 18,500 kg, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2007 Travel / Stroke Capacities: Longitudinal (X): 3,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,000 mm Table dimensions: Length: 3,700 mm Width: 850 mm T-slots: 5 x 22 H12 Reference slot: 1 x 22 H8 T-slot spacing: 140 mm Paintwork: RAL 5011 (steel blue) RAL 7035 (light grey) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 24 kW Spindle speed range: Spindle speed: 20-3,000 rpm Torque: 479 Nm Max. feed rate: X, Y, and Z axes 25,000 mm/min Mean acceleration: 2 m/s² Weight: approx. 18,500 kg HEIDENHAIN iTNC 530 HSCI Swiveling control pendant including Heidenhain iTNC 530 control (1 processor / 4 axes) with software options 1 and 2. Automatic Milling Head, Diagonal H4 Automatic indexing Soraluce “Diagonal” milling head, Type H4 / 2 planes with 2.5° x 2.5° indexing, 479 Nm, tool clamping force 18,000 N. Automatic tool changer: Automatic tool changer (random carousel) with 20 magazine positions: The automatic tool change is carried out in the vertical position of the tool spindle. Gjdpfoxgn Efjx Abmobl Maximum tool diameter: 125 mm Maximum tool length: 250 mm Maximum tool weight: 15 kg Number of magazine positions: 20 Chip conveyor package: Three chip conveyors, two longitudinal screw conveyors and one cross hinge belt conveyor with integrated coolant tank, discharge height: 1,000 mm Coolant System 2: Coolant/lubricant system 2 with discharge via shower ring and internal coolant supply according to DIN 69871 Form AD, tank capacity 500 l + 150 l lift tank with pump, delivery rate 50 l/min, delivery pressure 5/8 bar. Increased delivery pressure of high-pressure pump from 15 bar. RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced by us following a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, all identified visible defects and faults are professionally repaired by our expert service team.

Condition: new, Year of construction: 2019, functionality: fully functional, total length: 6,000 mm, total width: 1,800 mm, Industrial vacuum and pressure impregnation plant designed for efficient and uniform wood treatment. The T10 features a Ø1,800 mm × 6,000 mm autoclave, handling 8–9 m³ of timber per charge, with operating pressure up to 15 bar (abs). Gbjdpfx Abjx Sdptjmel The plant is fully automated via PLC, enabling precise control of vacuum, pressure, time and preservative absorption. Built to EN 13445 standards with third-party inspection, it is suitable for modern chrome- and arsenic-free preservatives. Complete system includes pressure vessel, working tank, vacuum and pressure pumps, cleaning system, trolley loading system and safety features. Ideal for sawmills and industrial wood processors seeking reliable, high-quality impregnation performance. Technical specifications available on request.

Condition: new, Year of construction: 2026, We offer: Pellet machines from the WALW-Solutions brand, featuring unique quality, honest workmanship, and at a fair price. Honest Work: We manufacture our systems ourselves directly in Poland. Only components such as gearboxes and motors are sourced from reputable manufacturers. All other parts are designed and built in-house, allowing us to meet every requirement individually. Fair Price: We produce in Poland and are transparent about it. Other competitors who label their product as 'Made in Germany' typically only assemble the machines in Germany and source most components from Lithuania. We let you benefit from the lower production costs, which allows our offer prices to often be 40% below those of competitors. These machines for pellet production are completely new to the market in this price/performance segment and are unique in Europe! WALW-Solutions machines are available exclusively through us! From systems for processing your own wood chips from firewood operations or joineries, to professional industrial pellet production from wood chips, straw, miscanthus, etc.—as well as manufacturing hay or straw cobs—we can provide the ideal solution for your needs. Godpfx Aslt Ugtebmobl Our plants have capacities ranging from 150 kg/hour up to 5 t/hour and come equipped with all necessary components for a fully automated system. We offer tailored solutions for any input material and can integrate automation into existing systems as well. All machines and control units are equipped with components from Siemens, ABB, Schneider Electric, or similar leading brands. Please note: If you have a valid VAT ID, net purchases are possible! We look forward to your inquiry! For more information or direct interest, please contact me on my mobile at:

Year of construction: 1999, condition: ready for operation (used), travel distance X-axis: 275 mm, travel distance Z-axis: 1,050 mm, controller manufacturer: FANUC, controller model: Series 16-T, number of axes: 2, Cylindrical grinding machine manufactured in 1999. This STUDER S30 LEAN PRO features maximum table swivel 8.5 degrees, X-axis travel of 275 mm, and Z-axis travel of 50 mm. If you are looking to get high-quality grinding capabilities, consider the STUDER S30 LEAN PRO machine we have for sale. Contact us for further details. Gbjdpfjy Hi T Hsx Abmjl TECHNICAL SPECS:- Centre height: 175 mm (6.9") - Centre distance: 00 mm (39.4")- Longitudinal slide Max. travel: 50 mm (41.4")- Longitudinal slide Speed (vt): ,000 mm/min (394 ipm)- Longitudinal slide Resolution: mm (.000.004")- Maximum table swivel (Centre distance 00): 8.5 degrees- Wheelhead slide Max. travel: 275 mm (.8")- Wheelhead slide Speed (vt): ,000 mm/min (394 ipm)- Wheelhead slide Resolution: mm (.000.004")- Max. workpiece weight between centres: 130 kg (286 lbs)- Max. load moment (Mmax): 160 Nm (116 ft lbs)- Workhead: Non-swivelling, Roller bearing, AC-Servodrive - Workhead Option: Camlock Adapter - Tailstock Fitting taper: Morse 3 - Tailstock Travel of barrel: 35 mm (1.37")- Control Unit: Fanuc Series 16 (32-Bit processors, ISO and pictogram programming)- Wheelhead Variants: Turret wheelhead U left 400x80 mm Turret wheelhead U left 500x80 mm Grinding wheel right 400x40 mm Grinding wheel right 250x25 mm- Internal grinding attachment: For belt driven spindles Ø0 mm - Max. grinding length (Ls): SPW + b - 80 mm - Max. diameter with three-jaw chuck (ØF): 129 mm - Max. diameter with closed steady (ØL): 140 mmHours: 47.550Condition: Well maintained

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings Gsdpfx Absxgumcjmobl - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, The machine's control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for blanks with tensile strength 400 N/mm² max.: 3.5 mm Minimum sheet thickness: 0.5 mm Godpfsy Emr Djx Abmjbl Punch head force max.: 40 presses with max. force 7 t & 4 presses with max. force 26 t Lower cylinder force max.: 6 t Double punch force: 12 t (2 hydraulic punches) Minimum input table length: 370 mm Maximum input table length: 3,048 mm Minimum input table width: 300 mm Maximum input table width: 1,524 mm Maximum input table diagonal: 3,408 mm Minimum output table length: 250 mm Maximum output table length: 3,048 mm Minimum output table width: 60 mm Maximum output table width: 1,524 mm Vertical stroke of scissor lift table: 550 mm Usable load capacity of scissor lift table: 5,000 kg Minimum size of transportable sheet stacks: 300 x 100 mm MACHINE DETAILS Electrical Data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller conveyor PRL3814F Universal destacking device DUF15 Punch head H2 Hydraulic power unit C1515 (3-unit pump system) Lower cylinder EI09 Double rotary punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 MHz WINDOWS NT Documentation

Condition: used, Krauss Maffei SR 500 processor card for MC3F- for MC3F sequence control - removed from running machine - fully functionalmanufacturer: Krauss Maffei type: SR500/310 spare part number: 5 Dition: gebraucht Gedpfsrr Ehqex Abmobl

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 50 kg, warranty duration: 12 months, total height: 1,950 mm, type of input current: AC, total width: 1,900 mm, total length: 2,020 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, overall weight: 5,800 kg, input voltage: 230 V, compressed air connection: 6 bar, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Reference Measuring Device Mahr OMS 1000 Multisensor The all-round measuring device for the broadest range of components or pallet measurements Factory-refurbished premium multisensor measuring center with warranty, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or freight forwarding, worldwide. Online or on-site demonstrations with customer parts available, application-specific consultation by accredited Profitech metrology laboratories during project planning. Full service possible: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Customized training and education programs also available as online courses. Rental, hire-purchase, or financing possible directly through Profitech and without a financial institution. Measuring device can be configured individually to customer requirements. Measurement accuracy: E1 = 1.3 + L / 400µm E2 = 0.9 + L / 600µm E3 = 2.2 + L / 300µm Measuring range: approx. 1000 x 1000 x 350 mm Includes optical sensor (camera & laser) Renishaw TP200 probe system incl. Standard Force Module CNC control incl. hand control panel 27-inch flatscreen monitor Evaluation station incl. Windows 10 operating system (Windows 11 available on request) New Opticheck 3D 5.0 software Active vibration damping (pneumatic) suitable for production-related measurements Gsdpfxjxbpgts Abmebl Optical sensor: • Pure grayscale image processing • Fast, digital image processor • Automatic feature and edge filter • Error documentation via program-controlled video image storage • Multifunctional multi-window technology • White telecentric transmitted light • Coaxial reflected light • 3D multi-sensor head Laser Sensor: Laser preparation for laser autofocus. Software-controlled intensity regulation for adaptation to different materials. Software: • Full version WITHOUT subscription model or maintenance contract • User-friendly, interactive programming • Symbolic representation of the program structure • Multitasking enables parallel measuring and evaluation • Powerful basic editor for customer-specific programs • Automatic sensor calibration • Geometry elements: point, line, circle (envelope, best-fit and circumscribed circle), ellipse, plane, cylinder, cone, sphere • Geometry functions: intersection, distance, angle, perpendicular, symmetry • Form & position tolerances: straightness, roundness, flatness, cylindricity, parallelism, perpendicularity, inclination, position, symmetry, concentricity, run-out, total run-out, flatness run-out, total flatness run-out • Maximum material condition (MMC) • Up-to-date tolerance tables according to common DIN standards • Software module for creating any factory-specific tolerance tables

Condition: good (used), Year of construction: 1999, functionality: fully functional, Machine new white-color in 2014 (order by SIEMENS Energy) Technical Data Working area Max. swing over bed: 570 mm Max. swing over cross slide: 365 mm Max. turning length: 1500 mm Centre height over flat bed: 280 mm Max. workpiece weight: 400 / 1000 kg Max. workpiece clamping length: 1300 mm Work spindle Spindle head DIN 55027, size 8, internal taper 70 Spindle bore: Ø 62 mm Spindle diameter in front bearing: 100 mm Spindle through-hole (depth): 200 mm Max. chuck size: Ø 315 mm Speed range: 3–2500 rpm Max. faceplate diameter: Ø 560 mm Max. faceplate speed: 700 rpm Max. torque: 1800 Nm Carriage – travel Longitudinal travel (Z-axis): 1160 mm Cross travel (X-axis): 345 mm Tooling system: Parat-3 Tool cross-section DIN 770 (h × b): 32 × 25 mm Tailstock Tailstock movement by hand Godpfx Aox Ahx Debmobl Quill taper: MK5 (MT5) Quill diameter: 80 mm Quill stroke: 190 mm Accessories / special equipment CNC control: SINUMERIK 810 D 32-bit processor, digital control ManualTurn with cycle support 10.4" colour LCD display Operating manual 094.0003.1330-00 3-jaw chuck Ø 315 mm Faceplate Ø 350 mm (up to Ø 560 for thin workpieces) Radius turning function Turret on support: size 3, Parat 4-station, manually indexable 4 × 90° Chip conveyor Bürener Maschinenfabrik Particularly suitable for: see production spectrum

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Gbjdjvvi I Repfx Abmol

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, The Stierli-Bender, featuring a tool height of 130 mm and a long stroke of 200 mm, is suitable for both straightening and bending operations. Its open design and perpendicular insertion relative to the bending axis offer manufacturing advantages not only to steel and metal fabricators but also to sheet metal and copper processors. Gjdpoy Rppvefx Abmjbl With the available standard tooling, very tight and closed forms, box sections, pipe pieces, brackets, or similar parts can be bent quickly and precisely. Depending on application requirements, the machine can be equipped with either a manual control unit or a CNC "Touch Screen" controller with angle programming.

Condition: excellent (used), Year of construction: 2014, Marel TBL 3000 Target Batcher Marel’s TargetBatcher has long been known for its accuracy and weighting for fixed-weight packaging. With 7 high accuracy static scales, with 14 buffer containers, TargetBatcher selects the best product combination in just a fraction of a second, making it much easier for processors to process multiple small product batches where a quick change from one product to another is crucial. TargetBatcher is present in plants around the world and is used for a variety of products e.g. mackerel, haddock fillets, tuna steaks, tiger prawns in shell, hake slices, squid, cuttlefish and other products. This compact, compact weight is available in two variants: fresh and frozen products and specially glazed products. TargetBatcher is an easy way to reduce raw material loss, mainly by combining the pre-determination of the number of frozen or fresh products that should be in a package of a certain weight. Optionally, you can use Marela software that tracks machine operation in real time. The information collected from TargetBatcher is a complete overview of the activities that are part of the weighing process. TargetBatcher is accurate and effectively reduces raw material losses. It is a stable device that you can rely on and doesn’t need too much maintenance and is also easy to use. Model: Marel TBL-3000 Year: 2014 Machine dimensions (LxWxH): 3.130x790x1.610 mm Machine weight: 330 kg. Gbedpfxoy Au Iuj Abmel Power: 230/400V / 1kW / 50/60Hz Max. productdimensions (LxWxH): 280x170x120 mm Max. product weight: 3.000 g Capacity: 12-24 portion/min. Accurancy: 1g / 0,035 ounces

Condition: excellent (used), Year of construction: 2018, Marel 2730 salmon filleting machine with back and belly trim The Marel MS 2730 is an automated salmon filleting machine designed to maximize yield and throughput, capable of processing up to 25 fish per minute. It features automated size adjustments via a touch screen, includes advanced back and belly trimming, and is built for easy operation and hygiene. The machine accommodates salmon from 1.5 to 8 kg, with optional kits available for smaller fish, and is part of Marel's larger processing solutions. Gbodoy Aul Tepfx Abmel Key Features and Capabilities Automated Processing: The MS 2730 automatically adjusts to different fish sizes and uses electronically controlled tools to maintain high quality and consistent results. High Throughput: It can fillet up to 25 salmon per minute, increasing production efficiency. Improved Yield: The design includes a set of circular knives that capture meat near the center bone, significantly increasing fillet yield. User-Friendly Operation: A multilingual color touch screen provides easy and safe control over all operations, with pre-programmed settings for different fish sizes. Compact Design: The machine has a compact footprint, allowing for easier integration into existing processing lines. Technical Specifications Fish Size: Standard 1.5 to 8 kg, with a kit available for fish as small as 500 g. Water Consumption: Approximately 15 liters per minute. Power Requirements: Operates on 3 x 400V and requires a 3.3 kW power supply. Benefits for Processors Efficiency: Streamlines workflow with automated adjustments and high-speed processing. Quality & Yield: Produces high-quality fillets by including more meat and minimizing waste. Flexibility: Accommodates various fish sizes and is part of a larger, integrated system for comprehensive processing solutions. Cost-Effectiveness: Optimized water consumption reduces operating costs. The fish is fed into the machine belly down, which makes the infeed much easier and faster. An additional set of circular knives cuts the fish from vent to tail. This cut raises yield, as the meat close to the center bone is included in the fillets. For the belly bone cut, 4 sets of finger pressures secure maximum control of the fish and enable optimum cutting of both pre-rigor and post-rigor fillets. The result is high-quality fillets with higher yield and output. The MS 2730 automatically adjusts to various fish sizes, so there is no need to adjust once the program has been switched on. The MS2730 can process up to 25 fish per minute, depending on the length of the fish. With the built-in system for measuring the fish´s profile and size, the electronically controlled cutting tools can automatically adjust the filleting program to the fish´s size and shape. The result is higher throughput, quality and yield depending on trim specifications. With the optional small fish kit installed, the MS 2730 is capable of filleting fish weighing from 500 g up to 4 kg. Manufacturer: Marel Model: MS 2730 Year: 2018 Capacity: 25 fish per minute Fish size: 1,5-8 kg. Power Supply: 400/230V / 50 Hz Power: 5,5 kW Water consumption: 15 liter/min. Machine dimensions (LxWxH):  3.150x1.035x1.980 mm Machine weight: 1.000 kg.

Condition: used, Year of construction: 2018, operating hours: 2,260 h, power: 368 kW (500.34 HP), front tire size: 710/70R42, rear tire size: 500/85R30, Equipment: air conditioning, cabin, Equipment: / All-wheel drive, autopilot, on-board computer / monitor, / automatic climate control, electric adjustable counter-blade, / yield measurement, cab, performance monitor, / maize header, metal detector, kernel processor, / radio, row-independent, rotating beacon, / Sch Gjdpoy Hdqyofx Abmebl

Condition: excellent (used), Year of construction: 2024, machine/vehicle number: VP320C46009320240131V002, Max. media roller: 450 mm Max. media width: 320 mm Max. label roller: 310 mm max. label length: 1200 mm Max. media thicker: 0.3 mm Technical data Speed: max. 7.3 m/min Printing process: CMYK LED toner technology Print processor: 933 MHz, 2 GB, RAM 2G; HDD 40 G Warm-up time: under 28 seconds Interface: TCP/IP Web width: min. 210 mm, max. 330 mm Print width: max. 304 mm Print length: max. 1,200 mm Roll diameter: max. 450 mm (unwinding and rewinding) Roll weight: max. 47.2 kg (unwinding and rewinding) Printing material: 30 - 350 g/m² Gjdpevf Inbjfx Abmobl Resolution: 1200 x 2400 dpi Toner capacity: CMY: 18,500 pages A4 at 5% coverage K: 26,000 pages A4 at 5% coverage Fixing: 480,000 pages A4 Service life Dimensions: 1400 x 850 x 1600 mm Weight: 350 kg Ambient: Temperature 20°C - 24°C, relative humidity 45 – 55% Connection value: 220 – 240 V AC, 50 – 60 Hz, 3.8 KW

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm Gedpfx Absibq Itemsbl sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Key Data Machine: TRAUB TNL 18 Year of manufacture: 2015 Condition: Premium grade / Excellent Previous owner: Smith & Nephew; manufacturer of orthopedic implants Machine type: TNL 18, version TNL18-9 Acquisition price (2015): 206,800 EUR Application: Long and short turning operations Manufacturer: TRAUB Drehmaschinen GmbH & Co. KG Control / CNC Control system: TX8i-s with 64-bit RISC CNC/PLC processor USB interface PC connection via fiber-optic cable Color TFT flat-screen Electronic handwheel Software package: Helical / Polyform Thread cutting without compensation chuck Parting-off tool break monitoring Axis / GSP block position shutdown Spindles / Axes / Clamping technology Main spindle with belt drive Hollow clamping cylinder C-axis Change parts for collet F25 Mount for driven and programmable guide bushing Change parts for short turning mode Counter spindle with belt drive Hollow clamping cylinder X-Z-C axis Part ejector unit for flushing workpieces from the counter spindle Tool system Lower turret with X-Y-Z-H axis, main drive, 8 tool stations Upper turret with X-Y-Z-H axis, main drive, 8 tool stations Measuring systems / Additional axes Glass scale X-axis top and bottom Glass scale X4-axis Activation for driven and programmable guide bushing Workpiece handling / Peripheral equipment Workpiece discharge unit through the counter spindle Workpiece discharge unit at the front onto parts conveyor belt Hinged belt chip conveyor Manual rinsing unit for working area Connection for central extraction D 150 mm Coolant / Filtration / High pressure Operation with cutting oil Coolant supply 3 / 8 bar Tank: 500 l Compact belt filter on 500-l coolant tank Flow rate: approx. 100 l/min with emulsion or approx. 70 l/min with cutting oil Filtration fineness: approx. 30–40 micron Internal coolant supply up to 30 bar High-pressure coolant pump 120 bar incl. fine filter Immersion cooler for coolant cooling Coolant pump 20 bar Godpfx Abjyz Dywemobl Safety / Fire Protection Automatic CO2 fire extinguishing system Operational note: cutting oil EU conformity / CE present Electrics / Documentation Electrical system: 400 V / 50 Hz User documentation available Additional German documents available Magazine / Attachments Attachments for bar feeder magazine Suitable for LNS, FMB, IEMCA Magazine must be equipped for interchangeable operation with shift unit

Condition: excellent (used), Year of construction: 2017, operating hours: 5,120 h, functionality: fully functional, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 655 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, torque: 12 Nm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Axis Travel Ranges X-AXIS (longitudinal): 7,800 mm Y-AXIS (lateral): 1,100 mm Z-AXIS (vertical): 655 mm B-AXIS (vertical-horizontal rotation of the machining head): 0° ÷ 90° C-AXIS (vertical rotation of the machining head): 0° ÷ 360° Traverse Speeds X-AXIS: 75 m/min Y-AXIS: 60 m/min Z-AXIS: 40 m/min B-AXIS: 3,240 °/min C-AXIS: 3,600 °/min Axis Acceleration X-AXIS: 3 m/sec² Y-AXIS: 3 m/sec² Z-AXIS: 2 m/sec² Motor Spindle Max. power in S1: 15 kW Max. speed: 24,000 rpm Max. torque: 12 Nm Tool holder: HSK – 63F Spindle encoder for rigid tapping Water cooling with cooling unit Automatic Tool Changer Standard for 16 tools Maximum permissible tool size in standard magazine: Ø = 80 mm L = 300 mm Maximum permissible saw blade size in standard magazine: Ø = 180 mm L = 150 mm Saw blade magazine for max. saw blade Ø = 500 mm L = 73 mm Processable Profile Sides With tool without angle head (profile top, profile sides, end faces): 5 With saw blade, Ø = 500 mm (profile top, profile sides, end faces): 1 + 2 + 2 Thread Cutting Performance (with tap on aluminium and through hole) Rigid tapping: M12 Larger threads possible with thread milling cutter Profile Feeding 2 reference stops with fixed positions Functions Dynamic pendulum mode Processing of overlengths up to max. double the machine length (X axis) Cutting and separating of the bar (not with 2-bar parallel operation) Automatic operation: milling and cutting (not with 2-bar parallel operation) Workpiece Clamping Standard equipment pneumatic clamping elements: Versions dynamic and static 7,800/6 Max. number of pneumatic clamping elements: 12 6 clamps per zone, movable along the entire machine range Max. profile width, Y, with standard tool clamping: 550 mm Motorized clamping device Absolute measurement of clamp position Safety Devices and Protective Equipment Light curtain system for workspace access protection 3-sided metal safety fence Full machine enclosure by accident and sound protection cabin Internal lighting Protective cover made of laminated safety glass Machine Structure Monoblock machine frame made of electro-welded and normalized steel Chip conveyor with steel belt on the right side of the machine Machining Unit Portal construction Motor spindle controlled on 5 axes, simultaneous interpolation possible Minimal quantity lubrication system (oil) Central lubrication system for guides Gsdpfx Ajy Iqr Tjbmobl Operation and Control Control cabinet with cooling unit Pneumatic control cabinet CNC with real-time control MG-Pilot Industrial PC with touch screen Atom 1600 processor 15” graphic LCD-TFT color display Keyboard, mouse 1 Gbyte RAM 4 Gbyte Compact Flash card 4 USB ports RJ45 network card Software Microsoft® Windows® Embedded Bidi-CAM DRILL Power Supply (Voltage/Phases/Hertz) 400V/3PH/50Hz Software for Machining Center Control CAMPLUS for SATELLITE XT, graphical programming software for machining with 3D visualization SHAPE, software for creating any freeform machining contours