Used Chemspeed Chemspeed Asw2000 Parallel Synthesiser for sale (701)

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm Hsdpfjzfilwsx Abgop 3 knives Knife shaft speed: 4,800 rpm Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Equipment Spindle Moulder Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Compact multi-function machine for space-saving work Transportation possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, Length of the rolling table ca. mm Saw blade diameter ca. 400 mm weight ca. 900 kg Parallel stop: Hodpfxew Nrvho Abgsp Stop sliding table: 1460 mm with stop extension to 2840 mm Star delta circuit has been renewed

Condition: used, Length of the rolling table ca. 2280 mm Saw blade diameter ca. 400 mm weight ca. 900 kg Parallel stop: Hodpfx Abowzmvhogop Stop sliding table: 1550 mm with mitre rail incl. side stop extension to 1000 mm Star delta circuit has been renewed

Condition: used, Year of construction: 2023, Press brake Type/Model: Dener PX 60320 Condition: Used Year of manufacture: 2023 Hodpfx Ajzhmnujbgop Technical data: Main data and dimensions Press force: 3200 kN / 320 tons Bending length: 6,050 mm Distance between uprights: approx. 5,100 mm Stroke of the press beam: 350 mm Installation height: 650 mm Overhang in the side upright: 450 mm Hydraulic and drive system Main motor (power): 30 kW Hydraulic components from HAWE-Hydraulik or Bosch Rexroth Oil tank capacity: approx. 550 l Speeds Approach speed (Y-axis): up to 160 mm/s Working speed (bending phase): 10 mm/s Control and axes (standard equipment) CNC control: Standard with an ESA S 640 2D Standard axis configuration: 4 axes (Y1, Y2, X, R) Y1 / Y2: Independent hydraulic control of the two cylinders for precise parallelism X-axis (back gauge): Forward/backward movement (stroke usually 650 mm or 1000 mm) R-axis (back gauge): Height adjustment of the back gauge fingers Crowning: Integrated, CNC-controlled motorized table crowning for automatic compensation of deflection over the entire 6-meter length Weight and foundation Total machine weight: approx. 28,500 kg

Year of construction: 2021, operating hours: 7 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 13510, Kaufering, April 2019 – At bauma 2019 in Munich, Hilti demonstrated the latest generation of its DST wall saw, featuring fully integrated control electronics and significantly increased productivity: the DST 20-CA diamond wall saw. The new DST 20-CA electric diamond wall saw from Hilti is extremely compact and easy to handle. As the world’s first 32A electric high-frequency wall saw, it weighs approximately 60 percent less, has a maximum cutting depth of up to 73 cm with a 1600 mm blade, and comes with integrated electronics. The DST 20-CA diamond saw does not require an external electrical box, thus reducing the risk of cable breakage and simplifying the work process. Hands and mind free The cutting process is optimized by an integrated CutAssist system, which ensures a 15 percent higher cutting speed. The user only needs to set the necessary parameters, press the start button, and the Hilti DST 20-CA begins its work. This keeps the user’s hands free, allowing them to perform other tasks in parallel, such as preparing the next work steps. This saves time and makes diamond sawing operations significantly more efficient. The remote control, operating on the 2400 MHz band with frequency hopping technology and a range of approximately 20 meters, displays the cutting depth in real time on the display. Fast setup and configuration Hsdpfezgu Adsx Abgjp Thanks to the elimination of an additional electrical box, the low weight, and improved ergonomics, the wall saw can be set up quickly. Long setup and transport times are eliminated, allowing the user to begin diamond sawing quickly. The vibration-optimized DST 20-CA wall saw impresses with its performance. Compared to the DS-TS 20-E wall saw, it delivers 30 percent more power and 200 percent more torque. As a result, the saw can be used in a wide range of applications: cutting openings and penetrations in concrete, demolishing walls and floors, separating and cutting artificial or natural stone, and even cutting heavily reinforced concrete – all of which can be easily accomplished with the new wall saw, even in hard-to-reach areas. Included: guide rail DS-R230-L guide rail DS-R200L

Condition: used, Year of construction: 2014, functionality: fully functional, grinding length: 600 mm, grinding width: 300 mm, Main machine data: - Table size (W x L): 600 x 300 mm - Electro-magnetic chuck: 300 x 600 x 70 mm - Grinding wheel size: 355 x 25 x 127 mm Drive performance: - Spindle motor: 2.2 kW Machine dimensions: Dimensions: - Length: 2,300 mm - Depth / Width: 1,550 mm Hjdeyyymwspfx Abgsp - Height: 1,950 mm - Machine weight: 1,650 kg Standard equipment: - CNC-controlled vertical feed AD1 - Electro-magnetic chuck - Automatic demagnetizing device - Electronic cross-feed adjustment via operator panel - Coolant system with extraction, paper filter, and magnetic separator - Parallel dressing device (head-mounted) - Dressing device for table mounting - Motorized rapid traverse adjustment (vertical) - Grinding wheel flange - Grinding wheel - Halogen lighting - Balancing arbor - Balancing scale - 1 set of splash guards Incl. 3 grinding wheel flanges Incl. fine-pole electro-magnetic chuck 300 x 600 mm Pole pitch: 3 mm, pole width: 1 mm Instead of standard electro-magnetic chuck

Condition: ready for operation (used), Year of construction: 2022, Panel saw manufactured in 2022. This FELDER K 945S features a maximum cutting height of 155 mm and a maximum cutting width of 1250 mm. It includes a sliding table with a cutting length of 2800 mm and a powerful 5.5 kW main saw motor. If you are looking to get high-quality cutting capabilities, consider the FELDER K 945S panel saw we have for sale. Contact us for further details. • FELDER K 945 S sliding table saw • Manual blade angle adjustment with angle display and handwheel • Tilting saw unit 90°–45° • Blade diameter range: 250–450 mm • Maximum cutting height: 155 mm • Electric height adjustment • Maximum cutting width: 1250 mm • Main saw motor 5.5 kW (7.5 HP), 3x400 V, soft start, CE brake • Three spindle speeds: 3500 / 4500 / 5500 rpm Hedezdka Tspfx Abgsp • PCS (Preventive Contact System) safety system with optical status indicator; resettable after activation • Antistatic belt for PCS system • Sliding table, cutting length 2800 mm, anodized aluminum • 10-year warranty on the X-Roll sliding table system • Parallel fence with round guide bar, D = 50 mm • Rip fence 2600 mm with clamping system for extension table 1300/1500 • Extension table for cutting lengths 2500–3200 mm • Support surface: 1150 x 640 mm • Crosscut fence 3200 mm with 2 flip stops • Overhead guard for 1250 mm cutting width with 100 mm dust extraction connection • Machine stand for K 945 S, cast iron saw table; operating tools included • User manual in Czech • Additional warranty: 3 years on machine parts (valid when commissioned by an authorized FELDER technician) • Transport packaging for sliding table • Standard pallet: 2100 x 1500 x 1500 mm Additional equipment • Dust extraction system: • Mobile dust extractor AF 22 • 4.0 HP (3.0 kW), 3x400 V, 50/60 Hz • Standard dust filter • Connection ports: 120 mm and 80 mm • Dust extraction hoses: • 4 x industrial extraction hose H/SE Ø120 mm • 4 x industrial extraction hose H/SE Ø100 mm • Heavy-duty, abrasion-resistant, flame-retardant; smooth internal surface • Spare parts included: • Adjustable support rail (106ND) • Cross roller rail plate (Fen-Grau) • Clamp rail lower section • Compression spring • Clamp rail upper section • Additional machine spare part (222MB)

Condition: like new (used), Year of construction: 2024, operating hours: 7,556 h, functionality: fully functional, 4 x LIEBHERR LC 280 DC Gear Hobbing Machines For sale are 4 identical LIEBHERR LC 280 DC gear hobbing machines, all manufactured in 2024. Manufacturer: Liebherr Verzahntechnik GmbH Model: LC 280 DC Machine Type: CNC gear hobbing machine with integrated ChamferCut unit Quantity Available: 4 units Year of Manufacture: 2024 Example Machine No.: XXX Hedpfx Aozdv Upsbgop Control: Siemens CNC / HMI user interface Technical Data: Max. Workpiece Diameter: 280 mm Max. Module: 6 mm / 4 mm depending on the version Axial Travel: 400 mm Shift Travel: 200 mm Max. Hob Diameter: 150 mm Hob Speed: 2,250 / 6,000 rpm Table Speed: 250 / 800 rpm Max. Module ChamferCut: 5 mm Max. Tool Speed ChamferCut: 2,000 rpm Max. Tool Diameter ChamferCut: 130 mm Max. Tool Clamping Length Drilling Tool: 236 mm Max. Tool Clamping Length Shank Tool: 360 mm The LC 280 DC is a compact gear hobbing machine for workpieces up to 280 mm in diameter and integrated ChamferCut machining; according to Liebherr, it is designed for gear hobbing and parallel, defined deburring/chamfering. ([Liebherr][1]) Equipment: Integrated ChamferCut unit Automatic workpiece handling / round magazine Siemens CNC control Liebherr HMI / production interface Workpiece spindle Hobbing head Deburring/chamfering unit Full protection cabin Work area lighting Automation interface CE marking Machine suitable for dry and wet machining, depending on equipment and process Electrical data per machine according to the nameplate: 400 V AC 50 Hz Control voltage: 24 V AC Installed power: 29 kVA Rated current: 42 A cos φ: 0.81 Fuse: 63 A gL Control cabinet weight: 900 kg All 4 machines are identical, manufactured in 2024, and come from modern industrial series production. Technical data according to nameplate, manufacturer's specifications, and photo documentation. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2024, operating hours: 12,675 h, functionality: fully functional, A total of four identical KAPP gear grinding machines are for sale. KAPP NILES KX 260 TWIN Machine type: CNC gear grinding center / hobbing and profile grinding machine Manufacturer: KAPP NILES GmbH & Co. KG Number of machines for sale: 4 Address according to nameplate: Callenberger Straße 52, 96450 Coburg, Germany Model: KX 260 TWIN OEM machine number: XXX Year of manufacture: 2024 Inventory No. PPS: XXX Control: Siemens SINUMERIK Machine concept: TWIN / dual-spindle concept with rotary table Machining process: continuous hobbing grinding, optional profile grinding Automation concept: automatic loading, robot cell / FANUC loader visible Robot: FANUC Robot M-710iC/45M visible Condition: machine is powered on / screen is active / very modern, clean overall impression Manufacturer's specifications KX 260 TWIN Max. face diameter: 260 mm Max. workpiece length: 770 mm Module range: 0.5 – 6 mm Max. gear width: 320 mm, with corresponding design up to 520 mm Max. helix angle: ±45° These values correspond to the KAPP-NILES-KX-TWIN series; KAPP NILES describes the KX 260 TWIN as a machine for continuous hobbing grinding with dressable and undressable tools and specifies exactly these limit values for the KX 260 TWIN. Technical machine concept According to KAPP NILES, the KX TWIN series is designed for high production volumes in the medium and large series production of gears and shafts. The concept includes two identical workpiece spindles, which are arranged opposite each other on a rotary table. While one workpiece is being machined, the second workpiece spindle can be loaded and unloaded in parallel and aligned. Equipment / visible features Siemens SINUMERIK CNC control KAPP NILES operating interface TWIN spindle concept / two workpiece spindles Rotary table / indexing table Automatic loading cell FANUC M-710iC/45M robot Robot gripper / handling gripper visible Protective housing / safety cell Grinding wheel mounting / grinding spindle area visible Profile / hobbing grinding area visible Coolant / grinding oil area Work area lighting Full protection cabin Hodpjzdv Shjfx Abgop Manual control unit / electronic handwheel on the control panel Signal light / traffic light CE marking visible on the machine housing Documentation holder / machine documents visible on the machine Electrical data according to nameplate Normal supply: 400 V AC Frequency: 50 Hz Normal power supply voltage: 400 V AC Control voltage: 24 V DC Lighting: 22 W / 230 V Installed power: 110 kVA Rated current: 79 A cos φ: 0.64 Fuse: 100 A gL Control cabinet weight: 1,000 kg Operating hours according to the counter in the photo T1 Total operating time: approx. 12,675 h T2 Net operating time: approx. 5,538 h Additional photos and videos available upon request.

Condition: excellent (used), Year of construction: 2013, Technical specifications: Maximum cutting width: 3100 mm Hodpfx Aozfx Nfobgep Maximum cutting capacity for steel: 10.0 mm Cutting gap adjustment Cutting angle adjustment Adjustable parallel stop NC control: Maper by BAYKAL Cuts per minute: 12 min. Sheet metal support device Side protection grilles Motor power: 22 kW Dimensions (length x width x height): approx. 4000 x 3000 (1800) x 2000 mm Weight: approx. 9.7 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, overall weight: 5,250 kg, fuel type: diesel, tank capacity: 800 l, color: red, power: 400 kW (543.85 HP), output current: 720 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 440 kW (598.23 HP), nominal power (apparent): 500 kVA, total length: 4,450 mm, total width: 1,600 mm, total height: 2,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: DOOSAN, type of cooling: water, Are you looking for a customized uninterruptible power supply (UPS), emergency power system, or a complete energy system for industry, commerce, data centers, hospitals, agriculture, or critical infrastructure? Albari Power Systems GmbH develops, manufactures, and supplies customized uninterruptible power supplies (UPS), emergency power systems, hybrid energy systems, and complete power plants according to customer requirements. From a single emergency power system to a fully automated microgrid, you can get everything you need from a single source. Our services: * Diesel generator sets, from kVA to over 2,500 kVA per unit * Emergency power systems according to customer requirements * Uninterruptible power supplies for industry, hospitals, data centers, and infrastructure * Island operation * Grid-parallel operation * Peak load management * Load distribution between multiple generators * Fully automatic grid monitoring * Synchronization systems * Customer-specific switchgear * Energy management systems (EMS) Integration of complete energy systems: Our switchgear and energy management systems enable the seamless integration and fully automatic control of: * Photovoltaic systems (PV) * Battery storage systems (BESS) * Diesel generators * CHP plants * Public power grid * Consumer systems * Charging infrastructure * Industrial plants In doing so, we develop individual operating strategies for: * Self-consumption optimization * Emergency power supply * Peak load reduction * Load management * Microgrids * Island grids * Hybrid energy systems Our generator sets are supplied according to customer requirements: * Open design * Soundproof enclosure design * Weatherproof container design * Special containers * Mobile power plants Optionally available: * Fuel systems * Day tank systems * Automatic fuel replenishment systems * Remote monitoring * Cloud monitoring * Remote maintenance * SCADA systems * ComAp-based control systems * Grid analysis and energy monitoring Scope of supply: * Engineering and project planning * Manufacturing * Documentation * Load tests Hodpfx Aefn Efxobgsp * Delivery * Installation * Connection * Commissioning * Training of operating personnel Each system is individually planned and manufactured according to the customer's technical requirements. Albari Power Systems GmbH Your partner for emergency power, uninterruptible power supplies, battery storage, energy management systems, and hybrid energy systems. Price: Upon request, depending on the scope of the project and technical design.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Multifunction machine minimax cu 410 F 26 TERSA Multifunction machine minimax cu 410 F 26 with TERSA cutterhead, Year of manufacture 2021, 30 mm spindle arbor, Miter cutting device and pivoting milling spindle, ø 315 mm main saw blade, Saw unit with double pivoting segment guide, Hsdpfx Aoyz Sdwobgep Scoring device can be retrofitted, Rip fence 1115 x 335 mm, Saw unit can be pivoted from 90° to -45°, Right-hand/left-hand rotation of the milling spindle, Separate saw parallel guide and tenoning guide, Planer table 410 x 1810 mm, Chip removal 5 mm, 3 dust extraction ports, ø 120, Thicknessing table 775 x 410 mm, Working height for thicknessing 3 - 230 mm, 400 V, 50 Hz, 5 kW, Format sliding table 2660 x 360 x 142 mm, Table 1250 x 430 x 900, Weight 560 kg Transport possible for an extra charge.

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. Hsdpfswhdnhex Abgep The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: used, Year of construction: 2025, Used machine Year of manufacture: 2025 Condition: as new, delivered in 12/2025 Equipment and technical specifications: - Heavy-duty worktable made from strongly ribbed cast iron for maximum stability and durability - Robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation - Precision sliding table made from anodized aluminum – smooth-running guided via high-quality ball contact system - Carbide guideways – for lasting precision and minimal maintenance - Tilting cast iron saw assembly with double segment guidance – exact zero-point tilt for highest cutting accuracy - Heavy-duty parallel fence with round bar guide - Equipped with movable eccentric clamp - Integrated miter cutting device on the sliding table – for fast and precise miter cuts - Scoring unit with belt drive Hedjy Sva Depfx Abgop - Sliding table length: 2600 mm - Cutting length: 2600 mm - Sliding table width: 360 mm - Table length: 940 mm - Table width: 560 mm - Cutting width with parallel fence: 900 mm - Max. crosscut width to the left of saw blade: 3200 mm - Saw blade tilt: 90 – 46° - Max. cutting height at 90°: 100 mm - Max. cutting height at 45°: 71 mm - Saw blade diameter: 315 mm - Saw blade speed: 4000 rpm - Scoring saw blade diameter: 120 mm - Scoring saw blade speed: 9000 rpm - Motor: 6 kW - Weight: approx. 560 kg Availability: short-term Location: 63934 Röllbach

Year of construction: 2022, condition: used, Used equipment Year of manufacture: 2022 Features and technical data: - Allows a single operator to easily load panels onto the platform frame and swing them from a vertical to a horizontal position - Suitable for use with panel saws, vertical panel saws, rack storage, or for panel transport between workstations - Swivel frame with two-position locking mechanism (vertical and horizontal) - Table height can be adjusted to the desired working level via foot-operated hydraulic pump Hjdpfx Asyy Tp Sebgop - The design with a smooth scissor-lift mechanism ensures the platform is raised and lowered in a perfectly parallel manner - Sturdy roller supports on the lower rail and multiple all-direction rollers for ergonomic and easy handling - Counterweight on the lower frame provides secure positioning and maximum stability when moving the table - Operator pedal for the workstation table is easily accessible at all times - Easy to maneuver thanks to four swivel castors with a diameter of 125 mm - Two castors equipped with parking brakes - Swivel frame can be mounted and dismounted on the platform base frame quickly and easily - Complies with EN 1570-1 safety standards - Load capacity: 300 kg - Maximum table height: 1010 mm - Minimum table height: 400 mm - Swivel frame width: 1800 mm | Length: 1500 mm - Roller diameter: 125 mm - Dimensions: 1200 x 740 x 400 mm - Weight: approx. 80 kg - Swivel frame weight: 10 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Special SCM guide system for the saw carriage. The curved design between the ball bearings and running guides, as well as the hardened contact surfaces, ensure exceptional and consistent precision. The scoring unit can be easily swung in and out from the outside; a special plate enables precise positioning. The rip fence is extremely robust and can be used for both longitudinal and mitre cuts; quick reset to the starting position. The precise flip stops allow for direct reading of measurements along the entire length. Table dimensions: 830 x 1200 mm Hodpfoy Nugdjx Abgsp Saw carriage: 1500 x 290 mm Cutting length: 1500 mm Saw blade tilting: 45° Max. main saw blade diameter: 300 mm Max. scoring saw blade diameter: 100 mm Max. cutting height at 90°: 95 mm Max. cutting height at 45°: 67 mm Saw blade speed: 4,000 rpm Scoring saw speed: 8,000 rpm Cutting width with parallel fence: 1,000 mm Extraction port diameter: 100 mm Motor: 4 kW Weight: 425 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical data: - with electric height and swivel adjustment for the main saw blade, dimension input via keyboard - digital display of the swivel angle and cutting height - CE version - cutting length 3000 mm - with center and end position locking - cutting width 1300 mm - fine adjustment on the parallel fence - saw blade diameter max. 450 mm - cutting height max. 150 mm - cutting height at 45° max. approx. 106 mm - motor 5.5 kW with 4 speeds 3000/4000/5000/6000 rpm, manually adjustable - with automatic brake and digital display of the speed - 2-axis scoring saw with electric height and side adjustment Hedpfxsy Siz Is Abgep - RAPIDO scoring system - DUPLEX double-sided miter fence Availability: short-term Location: 63934 Röllbach

Condition: used, Used machine Equipment and technical data: - Table size: 800 x 1000 mm - Diameter of table opening: 480/380/170/125 mm - Taper of milling spindle: MK 5 - Spindle speed: 3000 + 4500 + 6000 + 9000 rpm - Height adjustment range of spindle: 150 mm - Distance from spindle center to front edge of table: 400 mm - Maximum permitted tool diameter: 250 mm - with wooden fence jaws (can be exchanged for metal fence jaws upon request) - with Holz Her 3-roller feed unit - with heavy-duty sliding table; runs on ball bearings on precisely milled, parallel guideways Weight: approx. 800 kg Hsdpfeyq T Ihox Abgop Availability: short-term Location: 63934 Röllbach

Condition: used, Used machine Equipment and technical data: - Vertical spindle travel: 150 mm - Spindle diameter: 30 mm - Spindle speeds: 3,500 - 7,000 rpm - With fixed spindle - Motor: 2.5–3.1 HP - Table: 830 x 700 mm - Slotting cutters up to 340 mm - With metal-jaw milling fence (Note: The Aigner parallel fence shown in the photos is not included in the scope of delivery!) - With 3-roller feed Weight: 240 kg Hedoy Dkgpjpfx Abgsp Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: very well maintained Equipment and technical data: Hjdozbv Hhepfx Abgsp Saw unit can be tilted up to 45° 3 speeds: 3500/4500/5500 rpm Motor: 7.3 kW S6 Cutting length: 3200 mm Cutting width: 1250 mm Cutting height max.: 133 mm Electric height adjustment X-Motion screen control with 5.7" monitor Controlled parallel fence Parallelogram guard, height-adjustable, can be swiveled out of the working area, saw blade diameter max. 400 mm Dust extraction connection 80 mm Scoring unit 1.1 kW, 8500 rpm with 2 axes Crosscut fence with 2 digital jaws Tool compartment for 5 saw blades Graduated scale index with length compensation for extension table Parallel fence with digital display and automatic length compensation when the saw blade is tilted, fence ruler length 1200 mm, can be swiveled out Availability: short notice Location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2012, operating hours: 18,476 h, spindle speed (max.): 7,000 rpm, travel distance X-axis: 70 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 250 mm, spindle motor power: 22,000 W, controller manufacturer: INDEX, controller model: C200-4D Control, number of axes: 9, This 9-axis Index C100 was manufactured in 2012. It features a robust cast iron machine frame and a powerful main spindle with a maximum speed of 7000 rpm and a bar diameter of 42 mm. The machine includes three turrets with live tools, offering versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the Index C100 horizontal turning machine we have for sale. Contact us for further details regarding this machine. Hsdezcykgjpfx Abgep - Machine Frame: Cast iron machine frame in vertical bed design- Tool Carrier Guides: Plate guides with high level of rigidity and dampening- Axis Drives: Double-scissor kinematics for tool carriers; AC synchronous drive technology- Headstock Design: Thermo-symmetrical design- Main Spindle (D42): Spindle head size 5 (DIN 55026 and ISO 702), max. bar diameter 42 mm, max. speed 7000 rpm, front bearing diameter 75 mm- Main Spindle Power: 22/29 kW (at 100%/40% duty cycle)- Main Spindle Torque: 50/65 Nm (at 100%/40% max.)- Main Spindle Clamping Cylinder: Hollow clamping cylinder D42/14 for collet or chuck clamping, hydraulic operation, stroke 12 mm, clamping pressure 8/80 bar, max. thrust 34 kN, max. pull 34 kN- C-Axis Drive (Main & Counter Spindle): Hollow shaft motor, angular gauging system on spindle, resolution 0.00014 degrees, repeatability scatter Psmax = 0.01 degrees- Main Spindle Clamping Unit: Single pressure clamping unit, adjustable from 8 to 75 bar- Counter Spindle (D42): Spindle head size 5 (DIN 55026 and ISO 702), max. bar diameter 42 mm, max. speed 7000 rpm, collet chuck diameter 110 mm, front bearing diameter 75 mm- Counter Spindle Power: 16.5/19 kW (at 100%/40% duty cycle)- Counter Spindle Torque: 32/43 Nm (at 100%/40% max.)- Counter Spindle Slides (Z-axis): AC motor and ball screws drive, working travel 500 mm, rapid traverse 60 m/min, acceleration 10 m/s^2, feed thrust 3000 N- Counter Spindle Clamping Cylinder: Hollow clamping cylinder D42/14, hydraulic operation, stroke 12 mm, clamping pressure 8/80 bar, max. thrust 34 kN, max. pull 34 kN- Counter Spindle Clamping Device: Single pressure clamping device, adjustable from 8 to 75 bar- Tool Carrier 1: X-axis travel 70 mm (rapid 30 m/min, acc. 9 m/s^2, feed force 3000 N); Z-axis travel 250 mm (rapid 60 m/min, acc. 9 m/s^2, feed force 3000 N); Y-axis travel 70 mm (rapid 15 m/min, acc. 5 m/s^2, feed force 3000 N). Turret 1 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max. speed 8000 rpm)- Tool Carrier 2: X-axis travel 70 mm (rapid 30 m/min, acc. 9 m/s^2, feed force 3000 N); Z-axis travel 400 mm (rapid 60 m/min, acc. 9 m/s^2, feed force 3000 N); Y-axis travel 70 mm (rapid 15 m/min, acc. 5 m/s^2, feed force 3000 N). Turret 2 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max. speed 8000 rpm)- Tool Carrier 3: X-axis travel 125 mm (rapid 30 m/min, acc. 10 m/s^2, feed force 3000 N). Turret 3 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max.

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 275 mm gear width: 55 mm Hsdpov N Hilofx Abgep max. module: 6,5 min. module: 1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be “prepared” for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts. *

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 161 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, number of axes: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details. • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposite tools • 6x boring bar holders • Driven toolholders (HEIMATEC): • 4x radial • 4x axial • Collet holders (Bellegrandi): • Main spindle: MSCNT70-A6” for BA & BD collets size 70, complete with related cups • Counter spindle: MSCTNR70-A5” for BA collets size 70, complete with spring ejector Additional equipment • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 Hsdpfxoy N Spco Abgep • Application: Automatic bar feeder for CNC lathes • Capacity: • Max bar length: 3300 mm (to be confirmed) • Max bar diameter: up to Ø80 mm (model family reference) • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feeding, synchronization with lathe cycle, compatible with spindle liner/guide channel systems, heavy-duty frame • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may belong to the lathe setup • Complete set of hand jaws (“Manine”) for parts unloader (parts unloader itself not specified) Machine Condition / Technical Status- IMPORTANT The machine is currently being sold in its present technical condition and the seller will NOT carry out the repairs before sale. Main known issues / condition points: • Lower turret driven tooling function not working correctly • Air/oil lubrication system issues detected • Presence of rust inside the lower turret gearbox • Upper turret gearbox found filled with NBU15 grease although the system should operate with air/oil lubrication • Z1 axis linear guides/slides require replacement • Z2 axis linear guides/slides require replacement • Geometry deviations detected during machine inspection • Various spindle/brake/hydraulic cylinder run-out deviations measured • Several bearings, ball screws, seals, guide rollers, belts, lubrication components and wipers require replacement according to the attached spare parts listInspection highlights: • Machine geometry and spindle parallelism were measured and documented • Run-out values were detected on both spindles and hydraulic chuck systems • Multiple axis lubrication and protection components require maintenance/replacement • Detailed spare parts list availableIncluded documentation: • Technical inspection report • Geometry verification report • Spare parts/replacement list • Photos of damaged/worn componentsThe machine remains a highly equipped Nakamura Tome WY-250 Super Mill platform, but prospective buyers should consider the required repair and maintenance work when evaluating the machine. Technical inspection and spare parts documentation available upon request. Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 900 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 660 mm, overall weight: 3,050 kg, table load: 1,250 kg, number of axes: 3, This 3-axis Other SHEFFIELD Endeavor 9.15.7 was manufactured in 2003. It features an X-axis travel of 900 mm, Y-axis travel of 1500 mm, and Z-axis travel of 660 mm. The machine is equipped with a granite table and brushless linear motors on the X and Y axes. If you are looking to get high-quality measurement capabilities, consider the Other SHEFFIELD Endeavor 9.15.7 CMM machine we have for sale. Contact us for further details. • CE Marked • Maximum 3D Speed: 39 m/min • Maximum 3D Acceleration: 1.7 m/s² • Voltage: 240 V • Accuracy Standard: DIN EN ISO 10360-2 • Specified Accuracy Temperature Range: 15°C – 25°C • Volumetric Length Measuring Error (MPEE): 2.8 + L/263 µm • Volumetric Probing Error (MPEP): 3.0 µm • Maximum Hourly Temperature Gradient: 2°C/h • Maximum Daily Temperature Gradient: 5°C/24h • Maximum Spatial Temperature Gradient: 1°C/m • Permissible Ambient Temperature Variation: ±5°C • Granite Table • Threaded Inserts: ISO M8 x 1.25 • Air Bearing Axes • Brushless Linear Motors on X and Y Axis • Renishaw High-Resolution Linear Scales • Geometric Error Compensation • Automatic Volumetric Temperature Compensation • Probe Head: Renishaw PH10MQ • Probe Head Weight: 645 g • A-Axis Indexing Range: 0° to 105° in 7.5° Increments • B-Axis Indexing Range: ±180° in 7.5° Increments • Positioning Repeatability: 1 µm • Maximum Extension Length: 300 mm • Probe Head Mount: M10 Thread • Probe Connection Thread: M8 Thread • Probe System: Renishaw TP20 • Reference Sphere Diameter: 19 mm Hjdpfx Aezcwfbsbgjp • Parallel Port Sale WITHOUT Software License

Condition: used, Crate unpacking machine with two packing heads Additional title: Crate unpacker with 2 packing heads Capacity filling line: 12000 bo/h Running direction: left -> right Position: in a footed housing Base construction: crate and bottle transport parallel Features: 2 packing heads, housing with safety doors Hsdozg I A Dopfx Abgep