Used Chemspeed Chemspeed Asw2000 Parallel Synthesiser for sale (708)

Condition: new, Year of construction: 2026, Perfect-2 1350 RED-L Wide belt sanding machine incl. sanding version for intermediate sanding of coatings Special price for showroom machine - in-house trade fair machine - - Robust, space-saving W-wide belt sanding machine for the highest demands. - Constant working height thanks to adjustable upper part - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level can be adjusted continuously according to a sanding grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit can be tilted 10 degrees - Parallel, spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 kW and 11 kW, 400 volts, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Belt tension, control and oscillation are pneumatic - Compressed air consumption approx. 2 l/min - Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum device for the entire work table with additional perforations of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Over-thickness protection for workpieces with feed emergency stop and lifting mechanism - Continuously adjustable chip removal rate Bljdek Dpp Sspfx Aihji - Electronic feed control on the control panel, continuously adjustable from 3 - 15 m/min - PLC control with teach-in memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Pass height 210 mm up to 18.5 kW - Sanding belt dimensions 1350 x 2000 mm Perfect - Equipment: High-quality, swiveling acrylic glass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and saving of sanding pad elements - Electronic compensation of sanding belt grit size - Operating and running hour counter Coating equipment: - Continuously adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included in the machine: Foldable outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 – Combined Saw-Milling Machine With pivoting saw blade, pivoting milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel distance 2250 mm) Large extension table (900 x 600 mm) with extendable aluminum telescope fence Max. saw blade diameter 315 mm with scoring device, pivotable from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large, double-bearing milling unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3,500 - 10,000 rpm With clockwise/counterclockwise rotation of the milling spindle Standard arc milling guard Two 5.0 kW motors with high power reserves Cast iron milling unit mounted on both sides at the top precision ball bearings on top close to the pivot point four optimally graduated milling speeds, which enables the sharpening of workpieces Powerful motors Industrial motor, 100% duty cycle for continuous operation (full load) suitable Scope of delivery: Arc milling guard Anodized aluminum format sliding table Aluminum fence jaws Folding stops Technical data Bodscnwydjpfx Aihsli Dimensions of cast iron work table 1112 x 430 mm Fence length 2250 mm max. saw blade diameter with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. crosscut width 2660 mm Saw blade pivot 90° - 45° Cutting width 900 mm Speed 4000 rpm Table saw - Spindle pivot 90° - 45° Spindle working length 100 mm max. tool diameter 210 mm max. tenon tool diameter 275 mm max. countersinking tool diameter 180 mm Speeds 3,500/7,000/10,000 rpm General - Motor power 400 V/50 Hz/S6 40% 2 x 5.0 kW (6.6 HP) Weight 470 kg Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Bljdpscnxa Nofx Aihoi Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Bledpfxoxgbwzj Aihji Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: excellent (used), Year of construction: 1987, Elektra Beckum used wood band saw BAS 315/5 WN55 Bsdpjvkyd Sefx Aiheli Year of manufacture: 1987 Serial No.: 2106584 Saw blade length: 2240mm Voltage: 230 volts Cutting depth: 170mm Parallel stop Base frame Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Work table dimensions: 610 * 431 mm Cutting speed: 900/450 m/min Flywheel diameter: 430 mm Max. cutting height: 270 mm Max. cutting width with stop: 370 mm without stop: 410 mm Saw band length: 3345 mm Precision guide 3 rollers: top/bottom Bsdpfx Aevk Sd Dsihjli Saw table inclination: -10 degrees, + 45 degrees Motor power: 1550 watts/400 volts Weight: 130 kg Dimensions in mm: 680*512*2048 Extraction nozzle diameter: 2*100 mm Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Bedpfx Aohp Rdljihsli Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft bandsaw HBS 533 S. Heavy-duty professional model with high weight for maximum smooth operation. Particularly quiet and precise operation thanks to a torsion-resistant machine housing. Large, one-piece cast iron saw table, swiveling from 0° to +20° with a ground and polished surface. Patented table tilting mechanism with handwheel and rack and pinion. Saw blade quick-release tensioning system. Ceramic saw blade guide rollers. Large cast iron parallel fence. Fast and precise adjustment of cutting height via handwheel and rack and pinion with millimeter scale. Safety switch for automatic shutdown when the door is opened. Large cast iron parallel fence. Comes standard with a miter gauge. Flywheels made of cast iron with a special coating on the running surfaces. Inspection window for checking the saw blade run. Professional saw table guide. The heavy, solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack and pinion guide. The tilt is continuously adjustable from 0° to +20°. Patented. Work table dimensions: 750 x 530 mm Cutting speeds: 1400 m/min. Flywheel diameter: 530 mm Max. cutting height: 350 mm Bljdpfx Aijb S Uzkohji Max. cutting width with fence: 465 mm Max. cutting width without fence: 510 mm Bandsaw blade length: 4190 mm Precision guide: top / bottom Saw table tilt: 0° - +45° Motor power 400 V/50 Hz/P2: 4.0 kW Weight: 305 kg Dimensions: 1000 x 720 x 2040 Dust extraction port diameter: 2 x 100 mm Location: In stock, Bitburg.

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Bedpov Erkaefx Aihjli Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: new, Year of construction: 2026, Holzkraft band saw HBS 633 S (IE3) In a heavy professional version with a saw blade quick-clamping system for professional users Article number: 5150063 DESCRIPTION Heavy professional version with a high weight for maximum smooth running Particularly smooth and precise running thanks to the torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, swivels from 0° to +45° with a ground and polished surface Patented table tilting device with handwheel and rack Saw blade quick clamping Bledpfx Ajvk Sfbeihei Precision saw blade roller guide Fast and precise cutting height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shutdown when the door is opened Large cast parallel stop With angle stop as standard Table tilt via rack and handwheel TECHNICAL DATA Dimensions and weights Length (product) approx. 1190mm Width/depth (product) approx. 820mm Height (product) approx. 2063mm Weight (net) approx. 377.7kg Extraction connection Extraction nozzle diameter 2 x 120mm Work table(s) Work table length 830mm Work table width 600mm Work table height 830mm Work table inclination 0 – 45° Explanation of work table inclination For safety reasons, a holding device/stop must be installed from 20° to prevent the wood from slipping! Electrical data Connection voltage 400V Mains frequency 50Hz Output power 4.1kW Cutting ranges Cutting height max. 90° 400mm Cutting width max. with stop 570mm Cutting width max. without stop 610mm Saw blade Saw blade speed(s) 1615m/min Flywheel diameter 630mm Saw blade length 4600mm Saw blade guide Precision guide top and bottom Location: from stock 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA – Multi-functional machine for sawing, milling, surfacing, and thickness planing. The worktables made of heavy-duty ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free operation. Unique in this performance class: smooth-running, anodized aluminum format sliding table with ball-contact system. Swiveling saw blade from 90° to 45°. Table extension with aluminum stop for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically toothed steel infeed roller for consistent workpiece feed during thickness planing. Arc milling guard for profiling, standard with fine adjustment. Milling unit with two speeds. Three independent motors for each working unit. Quality – Made in Europe. Equipment details Aluminum sliding table With a tried-and-tested ball-contact system Dust and dirt-resistant due to minimal contact point between ball and trapezoidal rail Permanently smooth running Saw unit adjustment Manual height and bevel adjustment of the saw unit via star handle Accurate positioning using a scale TERSA planer knife shaft No more adjusting and screwing Planer knife changes in seconds Self-locking Particularly quiet Table milling machine The milling unit has two speeds for flexible tool use. The machine is equipped with a fine-adjustable arc milling guard for profiling. With the aluminum sliding table, mortise and tenon joints can be easily cut. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. The surfacing table can be folded inward to save space. Changing from surfacing to thickness planing is done in seconds with a single movement. Surfacing planer Standard with TERSA planer knife quick-change system Large-sized surfacing tables The surfacing and thickness tables made of cast iron guarantee the highest smoothness and vibration-free operation. Saw unit Saw can be swiveled up to 45° Bsdpfx Aedqzh Toihsli With saw blade 250 mm Ø with max. 80 mm cutting height A width of up to 500 mm can be cut on the parallel fence. Table extension With degree scale and aluminum stop for angled cuts on panels and large workpieces Scope of supply: Tersa quick-change planer knife shaft Anodized aluminum format sliding table Miter fence with a folding stop Multi-function fence for parallel cutting and surfacing Eccentric clamping arm Model: minimax c 26g TERSA Article no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width to the left of the saw blade: 1200 mm Saw blade inclination: 90 - 45 degrees Max. cutting height at 90°: 80 mm Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer knife shaft type: TERSA Planer knife shaft diameter: 62 mm Number of planer knives: 3 pcs Surfacing table width: 260 mm Surfacing table length: 1040 mm Swivel angle of saw/surfacing fence: 90/45 degrees Max. material removal during surfacing: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. workpiece thickness: 3 mm Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es – Maximum configuration for professionals Saw-milling combination with miter cutting device and pivoting milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be pivoted from 90° to -45° High-precision format sliding table made of anodized aluminum Large extension table (1200 x 650 mm) With material roller and extendable aluminum telescope stop up to 3300 mm Pivoting milling spindle from 90° to -45° towards the rear into the milling fence Four milling speeds With right/left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch Supplied as standard with separate saw parallel fence and separate jointing fence for planing Equipment details: Sliding table with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double-bearing milling unit Pivoting, made of cast iron Mounting points directly on the table, resulting in optimal smoothness Milling spindle mounted high up on precision ball bearings, resulting in low bearing load and maximum possible service life Powerful industrial motors Milling fence Heavy-duty professional design The high-quality milling fence made of cast iron is supplied as standard with fine adjustment 3-way positionable for quick resetting of the setting With fine adjustment via rack and pinion, numerical display and aluminum milling fence jaws Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Can be conveniently folded down for cutting large workpieces Interchangeable aluminum ruler for narrow workpieces Cast iron double-bearing saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, bearing on both sides Height and adjustable up to 45° Scoring unit with separate scoring motor 0.55 kW as standard Bjdpod Hx Hmofx Aiholi Extension table with angle-adjustable telescope stop with degree grid division Dimensions and weights Weight approx. 900 kg Dust extraction connection Dust extraction nozzle diameter 3 x 120 mm Dust extraction nozzle diameter saw blade guard 80 mm Drive power Scoring motor 0.55 kW Main motor 2 x 5.0 kW Electrical data Connection voltage 400 V Format sliding table and table Format sliding table width 360 mm Format sliding table height 142 mm Table length 1380 mm Table width 465 mm Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 125 mm Spindle speeds 3500/6000/8000/10000 min⁻¹ Milling tool diameter max. Lowerable 240 mm Mortise milling 320 mm Circular saw unit and scoring saw Cutting length 3200 mm Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3300 mm Saw blade inclination 90 - 45 ° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: In stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light Bljdpew D T Dkjfx Aihoi T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW Blodpexgbxfsfx Aihei - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser DOS P Piston Dispensing System For a wide range of requirements Scheugenpflug piston dispensing systems operate on the principle of volumetric dispensing; the quantity of material dispensed is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a connected material supply system. When a two-component medium is used, the ratio of resin to hardener is simultaneously determined by the volumes of the two cylinders. The dispensing pistons simultaneously force both components through separate channels toward the outlet valve, where they only mix within the static mixing tube to form a homogeneous, reactive medium. The DOS P016 / 050 / 100 / 300 / TCA piston dispensing systems are high-precision volumetric units designed to process both single-component (1K) and two-component (2K) materials, covering a wide spectrum of application requirements. Precisely dimensioned dispensing cylinders ensure the delivery of reproducible material volumes. For 2K materials, the parallel emptying of both cylinders into the shared mixing tube ensures a consistently stable mixing ratio at all times, thereby guaranteeing maximum process reliability. At the same time, this method allows for the gentle handling of potting media that are sensitive to pressure, moisture, or shear forces, without the risk of material degradation. Users also benefit from quick and easy maintenance, long service lives, and significantly reduced upkeep costs. Optional features—such as valve monitoring, mixing tube heating, or dispensing head heating—allow these systems to be flexibly adapted to specific application requirements. Your benefits Dosing accuracy independent of temperature, pressure, or viscosity Constant mixing ratio at all times due to parallel emptying of dosing cylinders Wide range of applications (in terms of materials and use cases) Key functions Simultaneous cylinder discharge via a shared stroke mechanism ensures a homogeneous mixing ratio Sensor-based monitoring of inlet and outlet valves as well as cylinder filling Material temperature control via mixing tube heating (optional) Camera-based dispensing needle monitoring (optional) Bledpfx Aezc Nploihji Product data General Materials: 1K and 2K Viscosity: From liquid to high-viscosity Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and casting resin viscosity Precisely reproducible and highly accurate results Maximum process reliability Applications Potting, sealing, bonding, application of thermal interface materials, sealing, encapsulation (Glob Top) DOS P016 Max. volume/shot (2K at 1:1 ratio) 1K: 0.06/17 ml 2K: 0.1/32 ml Max. dispensing speed [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatability [°C]: up to 80 Outlets: 1K: 1–4, 6, 8 2K: 1–4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on operation "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional dosing units—new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST Bsdpox Sr Dfofx Aiholi diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,559 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 120 mm, travel distance Z-axis: 280 mm, spindle motor power: 5,500 W, total height: 1,700 mm, total width: 1,370 mm, overall weight: 2,300 kg, controller manufacturer: FANUC, controller model: Series 0i-TF Plus with 10.4" Touch Display, product length (max.): 1,360 mm, number of axes: 2, This Takamaz XT 6 was manufactured in 2020. It features a maximum turning diameter of Ø180 mm and a maximum turning length of 240 mm. If you are looking to get high-quality turning capabilities, consider the Takamaz XT 6 horizontal turning machine we have for sale. Contact us for further details. - Maximum Turning Diameter: Ø180 mm- Maximum Turning Length: 240 mm (depending on clamping device)- Rapid Traverse (X / Z): 18 / 24 m/min- Maximum Spindle Torque: 63.6 Nm- Spindle Bearing Inner Diameter: Ø75 mm- Spindle Nose: A2-5 short taper- Maximum Bar Capacity: 35 mm- Maximum Chuck Size: 203 mm (8 inch)- Spindle Center Height Over Floor: 950 mm- Tool Turret: 1 x 8-station turret (Direct mounting / boring cassettes)- Shank Height for External Turning: 20 x 20 mm- Maximum Shank Diameter for Boring Bars: 25 mm- Base Machine Dimensions (Footprint without accessories/transformer): 1,360 x 1,370 mm- Overall Height with Loader: 1,700 mm- Power Connection / Supply: 18 kVA / AC200V, 3-Phase, 50/60Hz- Rated Power (Nameplate): 13.0 kVA- Full Load Current: 36 A- Interrupting/Short-Circuit Rating: 2.5 kA- Working Hours (As of 2026/05/22 08:51:21):- Control On Time: 4525 Hours- Operating/Running Time: 1975 Hours- Processing Time: 1559 Hours- Free Use Time: 1733 Hours- Total Parts Counter: 25,600 pieces- Workpiece Counter: 21,801 pieces- Included Automation Equipment:- Fanuc Compact Loader FC60 (2-axis servo loader with two parallel pneumatic grippers, max workpiece diameter 60 mm, max weight 1.0 kg per hand, 90° pneumatic tilting unit)- Integrated parts infeed conveyor belt (length 800 mm)- Integrated parts outfeed conveyor belt (length 600 mm)- Additional Equipment, not included:- Chip conveyor- Reinforced high-pressure coolant pump- Power chuck- Tool holders- Hydraulic power pack- SMW-Autoblok VNK 70-37 hydraulic hollow clamping cylinder- Complete coolant system with standard pump- Leveling elements / alignment plates- Control cabinet with fan ventilation- Electrical transformer Technical Specification Counter Spindle No Bodpezb H T Ejfx Aihsli Driven Tools No

Year of construction: 2014, condition: excellent (used), Heating rail TG 200 mO from Herz for heating thermoplastic materials (e.g., acrylic glass). After localized heating, the acrylic glass sheet can be easily bent. A video of the machine in operation can be sent upon request. Two-sided heating system with infrared emitters and digital temperature controller, as well as an automatic timer. The timer starts automatically when the upper flap is closed, setting it to the pre-set value. After the set time has elapsed, a warning signal sounds to indicate that the material can be removed. Maximum working width approx. 2000 mm. Maximum sheet thickness, according to the manufacturer, is up to 12 mm due to heating on both sides of the sheet. Connection value: 230 volts / 2800 watts. With a practical parallel stop up to 1000 mm deep. CE marking. Operating manual. Bodpjzafiiefx Aihsli Dimensions approx. 2500 x 1200 x 200 mm (L x W x H). Weight approx. 35 kg. The machine can be demonstrated on-site after scheduling an appointment. We only offer machines that are readily available in our warehouse for demonstrations, see "other offers from this supplier".

Condition: good (used), Fritz Werner Universal Tool Milling Machine, Type 5130 Blodpszcw Ddsfx Aihei An extremely robust and precise universal tool milling machine from the long-established, high-quality German manufacturer Fritz Werner (Model 5130). This conventional knee-type milling machine stands out due to its solid grey cast-iron construction and exceptional reliability. It is ideally suited for workshops, toolmaking shops, repair facilities, demanding DIY enthusiasts, or training centers. The machine features a swiveling vertical milling head with manual quill feed (perfect for additional drilling operations) as well as a mechanical feed gearbox. A standout feature is the retrofitted premium safety spindle guard from Tecno Più. Technical specifications at a glance: Manufacturer: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Type / Model: 5130 (Series 5.130) Design: Conventional universal tool milling machine Tool holder: SK 40 (steep taper with drawbar) Table dimensions: Approx. 600 x 215 mm with 3 parallel T-slots Axis movement: Manual via precision handwheels (2 mm travel per revolution) + automatic feed (Type 101) Vertical head: Swivels ± 90° with manual quill lever and adjustable depth stop Drive: Three-phase motor (400 V, CEE plug included) Included accessories: Solid machine vise (mounted on table), drawbar, chip guard hood Safety upgrade (included): Spindle guard: Tecno Più S.r.l. (Model PTR 11/180) Year of manufacture of guard: 2017 (CE marked) Function: Impact-resistant polycarbonate shield (180 mm) with IP67 safety microswitch for automatic spindle cut-off when the guard is open. You can find other milling machines—new and used—in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Bsdpfot Hw D Rsx Aiheli Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Bodot Hw D Depfx Aiheli Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier Bsdpfot Hw N Hsx Aiheli disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: new, Year of construction: 2024, power: 16 kW (21.75 HP), overall weight: 1,250 kg, maximum load weight: 1 kg, operation weight: 1,250 kg, _____Schäffer loader, model 1622, with operator protective structure. Kubota diesel engine D902, 16.2 kW = 22 hp. Hydrostatic all-wheel drive with foot pedal. Tires 23x8.50-12 AS, offset +60. Original Schäffer axles. Combination oil cooler. Drum brake as parking brake. Maintenance-free articulated pivoting joint. Retention system (operator protective structure). LED work lights: 2 x front, 1 x rear. Parallel guidance. Additional control unit, mechanically operated. Working hydraulics 28 l/min. Adjustable steering column. Hour meter, fuel gauge, and temperature gauge. Mechanical hand throttle. Seat contact switch. Quick-change frame SWH with hydraulic locking. Special equipment: First Edition package. 1622 / 1422 SGT. Consists of: pressure-free return line, mechanical parking lock for additional control unit, comfort seat MSG 65, LED work light set 800 lumens, towing device with pin and lashing eyes, standard tires 23x8.50-12 AS, offset 60, attachment frame type SWH, hydraulic locking DW. Location: 54595 Prüm. Blsdozdmt Ajpfx Aihoi

Condition: like new (used), Year of construction: 2016, functionality: fully functional, turning diameter over cross slide: 230 mm, turning length: 810 mm, Equipment: documentation/manual, A like-new machine with accessories and complete documentation. Please examine the images carefully, paying attention to the operating hours! The machine will be available in approximately 4 weeks. Control: Heidenhain MANUALPlus 640 HSCI - TFT screen 15.1" - Control panel with alphanumeric keyboard for comments and numeric keypad - Control station can be swiveled 250° Bljdpfx Ajy Tzhpjihoi Tool drive for automatic turret - with 8 tool stations - Tool drive via gears and clutch - Drive speed adjustable, max. 4000 RPM - Milling with end mill Ø 12mm x 8mm x 45mm / min, C-axis via main drive - Main spindle speed 0.001°/min - 100 RPM Horizontal bed - Prism/flat guide hardened and ground Working area - Swing diameter over bed 400 mm - Swing diameter over compound slide 230 mm - Compound slide travel 220 mm Main spindle drive - Digital AC motor – 50% duty cycle, 16 kW Spindle head - Spindle head DIN 55026 A6 - Spindle diameter in front bearing 115 mm - Spindle bore 82 mm - Speed range RPM 1-3500 Cross slide - Feed rate range, plane mm/rev / Feed rate range, longitudinal mm/rev / Thread pitches mm 0.01-999.9 - Rapid traverse, plane/longitudinal m/min 5/10 - Automatic central lubrication - Digital AC servomotors, plane and longitudinal Tailstock - Quill diameter mm 60 - Quill travel mm 140 - Taper attachment MK 4 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide Control - HEIDENHAIN MANUALplus 640 HSCI - V-constant for manual and automatic turning - Electronic stop turning and automatic turning - Simple cycle input in dialog with graphical images - Contour cycles: machining and finishing, longitudinal and planar, with tapers, radii and chamfers - Drilling cycles with / without pecking - Drilling/hole pattern cycle for axial and radial centering and drilling - Free-forming cycles DIN 76 and DIN 509 Form E+F - Special free-forming - Facing - Threads cylindrical, conical, flat threads with constant or variable pitch and with suggestion for thread depth - Thread drilling cycle with chip breaking function - Thread repair - Variation possibilities within cycles - ICP interactive contour programming - Programming according to DIN 66025 - Structured programming (UNTS) - Parallel programming - Geometry input absolute or incremental - Feed rate input mm/rev or mm/min - Input of a safety zone in front of the chuck or simple stop - Graphical program simulation (line or cutting path) Simulation in single block or complete program - Oriented spindle stop with angle indication - Automatic program run optionally single block or sequence cycles (with door locking) - Tool memory for 250 tools - Comfortable tool file - Technology database with 9 material/cutting tool combinations - Assignment of cutting speed / speed and feed rate - Part program memory 1.8 Gbyte Standard accessories - Chip tray - Machine light LED and energy-saving function - Leveling elements - Main motor fan circuit, temperature-controlled - Single-chamber filter for coolant cleaning, integrated into the coolant line (40 my) - Complete documentation

Year of construction: 2024, condition: like new (used), functionality: fully functional, The Emmegi Rifila is a miter saw with a blade that moves from below, specifically designed for the precise cutting of aluminum profiles and sheets. Its robust construction ensures exact cuts with perfectly parallel profile sides. The machine can be equipped with roller conveyors to enable flexible use. The saw includes 2 new roller conveyors (see photos). - Precise cuts due to the stable machine structure - Versatile for use with profiles and sheets - Safety through an effective protective cover - Easy operation with an adjustable stop and scale - Carbide-tipped saw blade, Ø 350 mm - Max. after-cut height 120 mm - Protective device for the cutting area - Lubrication system with micro-spray device - Motor: Self-braking three-phase motor - Motor power: 1.5 kW - 2 roller conveyors Bledpfx Aoza Aafeihei