Used Cieffe Fncm 2.5/0.8/1500 for sale (6,806)

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA Hedpfsu Nzwujx Adzen rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Hedpfx Aju Nc Riedzon Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: used, Technical details: floor-plate length: 2000 mm plate width: 1500 mm Hjdou N D Rdepfx Adzjn plate height: 820 mm Plate thickness: 185 mm weight of the machine ca.: ca. 2,1 / 2,2 pro Platte t transport dimensions LxWxH: ca. 2,0 x 1,5 / pro Platte m There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm *

Condition: used, Year of construction: 2014, Technical details: turning diameter over bed: 660 mm turning dia. over face-slide: 460 mm turning length: 1650 mm centre distance: ca. 2200 mm swing over bed: 660 mm swing diameter over slide rest: 460 mm swing diameter: in Kröpfung: 960 mm centre height: 320 mm control: Siemens 828 D ShopTurn x-axis: ca. 350 (plan) mm spindle bore: Ø 105 mm range of revolution per miute: 26-224 / 225-670 / 671-2.000 stufenlos U/min feed continuous: X: 0,5 - 3.000 mm/min feed continuous: Z: 1 - 3.000 rapid traverse x + z axis: 6 m/min tailstock taper MT: MK 6 quill stroke: 300 mm total power requirement: ca. 23 kW dimension machine xH: 4,2 x 2,3 x 2,3 m dimension swarf conveyor LxWxH: 2,3 x 1,7 x 1,3 m Chip conveyor includes cooling water tank with pump 3-speed manual gearbox with electronic gear shifting Tool holder according to/with Silent Tool Technology equipped (Capto C6) Hodpou Ix Nrofx Adzen Manual control unit Foot switch Control panel Hydraulics automatic door closing (pneumatic) Accessories see comparable in the photo. *

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm Hjdpfou Tp N Dex Adzon plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Condition: excellent (used), 1 used, very well-preserved universal milling head system "HURON" with automatic 2.5° indexing on 1 axis, internal coolant supply through the spindle, and hydraulic tool clamping Manufacturer: CME, Origin Spain Model: FS Spindle mounting: DIN 69871 AD, ISO 50 Maximum speed range: up to 4,000 rpm Maximum drive power: 22/30 kW Weight: approx. 300 kg Hjdpfoyf Uqtox Adzsn This high-quality milling head was used as a loaner milling head and was only put into operation for repair purposes while the other milling head was being repaired and overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1999, total length: 3,350 mm, total width: 1,550 mm, total height: 1,800 mm, Colour: White Empty weight: 3.300 kg In very good condition. In 2017 Refurbished for €32.000 - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No Hedpfx Asy Ivx Esdzsn - Drive system: Teach-in - Power [kW]: 15.0 - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 290 - Distance between centres [mm]: 1500 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 2 - Max. spindle speed [rpm]: 2800 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3350mm x 1550mm x 1800mm (l x w x h) - Transport weight [kg]: 3300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 Hodpfol Nbqcox Adzen (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Electric chain hoist, electric hoist, crane GIS type 150 / F Hjdpegi E Evefx Adzon serial no.: 1502802 year of construction 1981 lifting capacity 1500 kg hook path 4 meters Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. - Electric trolley with one speed for double T-beam - 2 load lines good condition

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamps Metal table Hedpfx Adoul S Eaezjn Used exclusively in single-shift operation Includes tools from WILSON TOOL 19526

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Caterpillar C32, General information Hedpfx Adsx Dqnkjzen Field of application: Construction Weights Empty weight: 11.481 kg Functional Generator capacity: 1.500 kVA Dimensions of cargo space: 667 x 245 x 279 cm CE mark: yes Other information Fuel consumption: 232.8 Liter / Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = RATING TYPE STANDBY: Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year.

Condition: used, Year of construction: 2012, operating hours: 1 h, Empty weight: 1 kg Mast: articulated arm Hodpfx Adjzac U Nezsn Please contact Emal Jaweed for more information

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate Hsdjy Nduqopfx Adzsn -Clamping plate: Scribing and marking plate -Length: 1500 mm -Width: 1010 mm -Height: 170 mm -Sheet thickness: 44 mm -Quantity: 1 mounting plate available -Price: per piece -Transport dimensions: 1010/1500/H170 mm -Weight: 633 kg

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec Hedpfora Rrhex Adzen work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: ready for operation (used), functionality: fully functional, Wolfking 1500 L spiral / paddle mixer whit discharge hatch in the bottom. Very strong built model that is perfect for hard and heavily products. Hodpoy Tl Rhofx Adzsn

Condition: used, Year of construction: 2000, turning diameter 500 mm turning length 1500 mm control MONFORTS CONTROL control SYSTEM MTC-K turning diameter over bed slide 290 mm spindle bore 70 mm spindle turning speed range 3 - 2800 U/min spindle power 15 kW max. torque on the spindle 1530 Nm spindle head DIN 55027 Gr. 8 feed power X/Z axis 11300 N rapid travel - longitudinal/face 10 / 5 m/min bed width 360 mm travel of cross-slide 265 mm upper slide travel 140 mm turning tool - shaft cross cut 32 x 25 mm tailstock quill diameter 80 mm tailstock quill stroke 160 mm Hedpfx Adovh Ncrszon tailstock taper MT 5 weight of the machine ca. 3,3 t dimensions of machine L x W x H 3,45 x 1,65 x 1,93 m Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant

Condition: excellent (used), Year of construction: 2004, Technical data: Maximum turning height: 300 mm Maximum turning diameter over bed: 600 mm Maximum diameter over slide: 500 mm Distance between centers: 1500 mm CNC control: FANUC 21i-TB Revolutions: 16 – 4,000 RPM Spindle motor power: 18.5 / 30 kW 3-jaw chuck: 315 mm Tool changer: 12 stations CE marking Dimensions (length x width x height): approx. 6000 x 2300 x 2100 mm Weight: approx. 7.5 tons Accessories: 12-position tool turret Numerous tools Numerous driven tools Hydraulic chuck with additional jaws Tailstock W+W filter system Hsdpfxey Ub Ufe Adzen Chip conveyor The seller is not liable for typographical or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2014, operating hours: 52,999 h, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, mold height (min.): 250 mm, Arburg 470C-1500-400 injection molding machine with sorting flap (255) Year of production: 2014 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Tongue: german Installed power [kW]: 30.4 Working hours [h]: 52999 Weight [kg]: 4850 Dimensions [mm]: 4500×1700 Feed hopper: NO Hodpfx Aoy U H Htsdzen Core string: 2x Robot socket: euros 67

Condition: used, Year of construction: 2020, material thickness 0,5-50 mm material width 1500 mm Hsdpey S Diaofx Adzjn feed 4 m/min Operating hours 900 h The machine was completely overhauled in December 2015The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: defective spare-parts repository (used), fuel type: electric, overall weight: 2,465 kg, suspension: steel, Equipment: cabin, HEK GTP Dual 1500 – Transport Platform / Material Hoist Compact construction hoist from HEK Manufacturing BV with a lifting capacity of 1,500 kg and a maximum lifting height of 120 m (anchored). The platform (4,000 x 1,600 mm) accommodates 2 to 7 persons when used as a transport platform. As a material hoist, it is designed exclusively for goods transport. Power requirement is only 32 A (slow-blow). Equipped with a comprehensive safety system, including centrifugal brake, overload protection, and emergency brake release. Complies with Machinery Directive 89/37/EEC. Diagnostic available via display on the platform. Speed: 12 m/min (transport) / 24 m/min (material) Anchoring distance: 6–8 m Hedpfx Adey R Ruyezen Motor power: 2 x 4.8 kW / 400 V / 50 Hz

Condition: used, Year of construction: 2008, total length: 3,300 mm, total width: 1,800 mm, total height: 1,900 mm, overall weight: 6,000 kg, Working rangeCenter distance: 1,500 mmTravel over bed: 570 mmTravel over cross slide: 340 mmCross slide travel: 290 mmBed width: 350 mm SpindleSpindle head DIN 55027 size 8Spindle bore: 93 mmSpeed range: 1–3,000 rpmMain drive: 20 kW AC motorTailstockQuill diameter: 90 mmQuill stroke: 180 mmMounting: MK 6 FeedFeed force X: 7,000 NFeed force Z: 10,000 NRapid traverse X: 7 m/minRapid traverse Z: 10 m/min MachineWeight: approx. 3.6–3.9 tDimensions: approx. 3,300 × 1,800 × 1,900 mm EquipmentHeidenhain Manual Plus cycle controlHeidenhain AC servo drivesZF two-speed gearbox (electrically switched)3-jaw wedge bar chuck Ø250 mmFace plate Ø500 mmFixed steady restTailstock with live centerMultifix tool holderParat 4-station turretReinforced coolant pumpMachine feet AccessoriesMultifix tool holder packageVarious turning holdersMeasuring equipment / setting toolsSteering ringFace plateAdditional mountings and accessoriesDocumentation availableTypical dimensions (1,500 mm center distance version)Space requirement / dimensions approx.:Length: approx. 3,900 mmWidth: approx. 2,000 mmHeight: approx. 2,000 mm Hedpfey S Ni Ssx Adzjn Turning length max.: 1,500 mm Turning diameter over bed: 570 mm Weight approx.: 6,000 kg Dimensions (LxWxH) approx.: 3300 x 1800 x 1900 mm Turning diameter via support: 340 mm Control: Heidenhain Manual Plus Year of construction: 2,008 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: Yes

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 18,972 h, machine/vehicle number: 363/11, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 150 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, TECHNICAL DETAILS Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of upper roll: 130 mm Diameter of lower rolls: 150 mm MACHINE DETAILS Control: CNC Drive: Hydraulic Number of rolls: 4 Number of driven rolls: 4 Dimensions & Weight Hodpfx Asy Hhwqodzen Dimensions (L x W x H): 3,700 x 1,200 x 1,200 mm Transport weight: 2,000 kg Transport packages: 2 Operating hours: 18,972 h EQUIPMENT Cone bending CE marking

Condition: ready for operation (used), Year of construction: 2013, Offered is a precision sheet metal straightening machine. Material width: 1500mm, material thickness: 1-2mm, suitable for: aluminum, control: Siemens Simatic OP177B. Equipped with roller conveyor discharge frame. Additionally available spare parts: Siemens Control Unit 24V DC (6SL3040-1NB00-0AA0), Siemens compact asynchronous motor 15kW (1PH7133-2DF02-0BA0), Siemens synchronous servo motor (1FK7042-5AK71-1KG0), Siemens Sinamics Basic Line Module (6SL3130-1TE22-0AA0), Siemens Simatic Panel OP177B, INA cam rollers. Weight: approx. 6700kg, overall dimensions X/Y/Z: approx. 2400mm/1600mm/1800mm. Inspection possible by arrangement. Hedpfoy Uyfvex Adzsn

Condition: good (used), Year of construction: 2016, Apollo spiral conveyor, infeed at approx. 6.42m / outfeed at approx. 1.09m, approx. 40cm wide conveying path – used –: Hsdpfxsyhxp As Adzjn Price ex location (net): only €5,950 – dismantled, packed and loaded! Manufacturer: Apollo Model: SPC 1500-400-A4-6T Year of manufacture: 2016 Belt width: approx. 40cm Infeed height (top): approx. 6.42m Outfeed height (bottom): approx. 1.09m Spiral diameter: approx. 2m Kettenlänge (chain length): 37.5m Serial no.: 562044-100 230/400V / 50 Hz, 2.2 kW Speed (min): 40m/min IP54 Load capacity: 6.4kg/m Condition: good – very good Availability: immediately Location: Warehouse Frankenberg / Saxony

Condition: excellent (used), Weiss Technik SaltEvent Type: SaltEvent SC/UKWT 1500 Operating hours: approx. 11,889 h Year of manufacture: 2022 Recirculating Air Corrosion Change Test Chamber / Salt Spray Test Chamber For sale is a high-quality Weiss Technik SaltEvent SC/UKWT 1500 suitable for corrosion, salt spray, condensation water, and climate change testing applications. The unit is ideal for use in industry, research, development, and quality assurance. Technical Data: Manufacturer: Weiss Technik GmbH Type: SaltEvent SC/UKWT 1500, with ring flushing line Year of manufacture: 2022 Test chamber volume: approx. 1,450 liters Temperature / Climate Data: Temperature range (climatic test): +23°C to +70°C Humidity range: 20% to 98% r.h. Hsdpfxoy Hkg Io Adzon Dew point range: +12°C to +69°C Salt spray test: ambient temperature +5 K to +50°C Condensation water test: ambient temperature +5 K to +42°C Electrical Data: Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: 9.8 kW Rated current: 18 A Refrigerant as per nameplate: R134a – 1.30 kg – GWP 1430 CO2 equivalent: 1.86 t LP max.: 17 bar g HP max.: 25 bar g Media Connections: Compressed air / GN2: max. 12 bar Deionized water: min. 3 bar / max. 5 bar Water connection for ring flushing line: max. 6 bar Condensate drain available Exhaust air connection available Power supply: 3/N/PE 400 V / 50 Hz Dimensions (according to drawing): External dimensions: approx. 3710 x 1537 x 1769 mm Test chamber length: approx. 2365 mm Loading height: approx. 850 mm Weight (according to nameplate): approx. 710 kg Operating hours (as indicated): approx. 11,889 h Equipment / Features: S!MPAC / WebSeason touch control panel Ethernet / Network connection USB interface Salt spray Condensation water test Dry climate Climate / humidity operation Ring flushing line Storage tank Rod inserts Control cabinet integrated Exhaust air connection Compressed air connection Connection for deionized water Water connection for ring flushing line Condition: used Unit is fully visible as per the images provided. Current status: external operating mode. Display notice: hood not closed. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1500 Scope of delivery as shown in the images Inspection by appointment is possible. Loading can be organised. (Technical data subject to change and errors excepted!) Further questions can be answered by phone.