Used Coastone G25 for sale (160)

Condition: excellent (used), Pneumatic power clamp Make DESTACO Ijdpjq Evrajfx Afhsig type 82L 3G-251C8HO used from machine dismantling length 200 mm width 35 mm height 75 mm 2 x available

Condition: used, Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Iodpfxjzwcnie Afhoig Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Condition: used, Year of construction: 2024, load capacity: 25,000 kg, lifting height: 3,100 mm, total length: 8,880 mm, · Lastschwerpunktabstand: 1200 mm · Lastabstand, Mitte Antriebsachse zu Gabel: 1070 mm · Achsabstand: 4250 mm · Achslast, Last vorn: 15500 kg · Achslast, Last hinten 53800 kg · Achslast, vorn ohne Last 17400 kg · Achslast, hinten ohne Last 4100 kg · Spurweite, vorn / hinten 2200/2140 mm · Reifendruck 1,0 MPa · Mastneigung, α = vorwärts / β = rückwärts: 5/10° · Sitzhöhe 2150 mm · Höhe beim Neigen der EGO-Kabine / OHG 3800 mm · Breite beim Neigen der EGO-Kabine / OHG 3700 mm · Breite über Gabelarme, min. / max. 2700/800 mm · Seitenverschiebung ± bei Breite über Gabeln 557/1585 mm · Min. Arbeitsgangbreite für 90° Stapelung 9550 mm · Wenderadius 5875 mm · Wendekreis innen 550 mm · Betriebsdruck für Hydraulik 22,0 MPa · Hydrauliköltank, Volumen 330l · Kraftstofftank, Füllmenge 375l · AdBlue-Tank, Füllmenge 35l · Kraftstoffsorte des Motors Diesel, 4-Takt · Leistung ISO 3046 / bei Drehzahl 185/220 kW / rpm Isdpfxsztganj Afhsig · Drehmoment ISO 3046 / bei Drehzahl 1160/1200 Nm / rpm · Anzahl Zylinder / Zylinderhubraum 6 / 7700 cm³ · Kraftstoffverbrauch, normale Fahrweise 8-11 l/h · AdBlue-Verbrauch, normale Fahrweise 3-5 % of diesel · Getriebe Typenbezeichnung des Herstellers: Dana TE17000 · Kupplung, Typ Drehmomentwandler · Getriebe, Typ Hydrodynamisches Lastschaltgetriebe · Anzahl der Gänge, vorwärts / rückwärts 3/3 · Generator, Typ / Leistung AC/3080 W · Startbatterie, Spannung / Kapazität 2x12 / 145 V/Ah · Antriebsachse, Hersteller / Typ Kessler D91 / Differential und Nabenvorgelege · Hubgeschwindigkeit Ohne Last (m/s) 0,3 · Hubgeschwindigkeit Bei Nennlast (m/s) 0,32 · Senkgeschwindigkeit Ohne Last (m/s) 0,38 · Senkgeschwindigkeit Bei Nennlast (m/s) 0,38 · Fahrgeschwindigkeit, V/R Ohne Last (km/h) 24/24 · Fahrgeschwindigkeit Bei Nennlast (km/h) 23/23 · Steigfähigkeit, max. Ohne Last (%) 60 · Steigfähigkeit, Mit Nennlast (%) 29 · Steigfähigkeit bei 2 km/h Ohne Last (%) 41 · Steigfähigkeit bei 2 km/h Mit Nennlast (%) 22 · Zugkraft Max. (kN) 173 · Geräuschpegel, innen LpAZ*, EGO-Kabine (dB(A)) 72 · Geräuschpegel, außen LWA (dB(A)) 109

Year of construction: 2007, condition: as good as new (ex-display), “UNUSED – Schenck SLG 2.500 x 5.700 mm“ for Sale Find our complete stock on our website. Manufacturer: Schenck Type: SLG Iiodpfx Asglvw Isfhog Size: 2.500 x 5.700 mm Deck: 1 Fert. No.: VO35406.A01 Year of Manufacture: 2007

Condition: excellent (used), machine/vehicle number: 15645, Year of construction: 2024, operating hours: 127 h, load capacity: 2,500 kg, lifting height: 5,540 mm, free lift: 1,380 mm, load center: 500 mm, fuel type: gas, mast type: triplex, construction height: 2,480 mm, fork length: 1,200 mm, front tire size: 28x9-15, rear tire size: 6.50-10, overall weight: 4,226 kg, 5257627 Ijdjzv A Awopfx Afheig Serial Number: FGA25-4800-00974

Year of construction: 2008, operating hours: 9,750 h, condition: used, Field of application: Construction Iijdpfjh Tyzxox Afhjg Please contact Mohamad Fattah Ahmad for more information Piling rig Upper carriage : Sennebogen BS 80 R Engine : CAT C 18 570 kW Optional : Vibrator MR 125 V, KDK 232 S, DKS 100/ 200 Additional : Systems Vibrator, Kelly and CFA drilling central lubrication, air compressor , prepration CSM The machine is in very good working condition!

Year of construction: 2009, operating hours: 500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Base carrier: Sennebogen BS 80 R Iiedpjh Tyyhefx Afhsg Under carriage: BAUER UW 95 R Engine: CAT C 18 with 570 kW (no AdBlue nocessary) Available applications: Kelly rotary head KDK 235 S / double head rotary DKS 100/ 200 -02 / Vibrator MR 125 V This machine got only 500 running hours and is like NEW !!!

Year of construction: 2008, operating hours: 9,750 h, condition: used, Piling rig RTG RG 25S Iedpsh Tyz Ajfx Afhsig -Upper carriage : Sennebogen BS 80 R -Engine : CAT C 18 570 kW -Optional : Vibrator MR 125 V, KDK 232 S, DKS 100/ 200 -Additional : Systems Vibrator, Kelly and CFA drilling central lubrication, air compressor , prepration CSM The machine is in very good working condition!

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 300 mm, travel distance Z-axis: 1,400 mm, total height: 2,400 mm, total width: 2,560 mm, overall weight: 13,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, product length (max.): 5,460 mm, number of axes: 8, This 8-axis Index G250 turn-mill centre was manufactured in 2004. It includes a Knoll chip conveyor, EMAG cooling unit, and ISI mist extraction system. The machine features a hydraulic power chuck with a clamping range of 125–152 mm and an overhead gantry loader for automation. If you are looking to get high-quality turning and milling capabilities, consider the Index G250 machine we have for sale. Contact us for further details. - Control Unit: Siemens SINUMERIK / INDEX C 200-4D- Rated Voltage: 400 V AC (3 Phase, 50 Hz)- Rated Current: 74 A- Rated Power: 43 kW- Control Voltage: 24 V DC- Tool Turret: 12-station tool turret with driven/live tool capability (individual powered tools are not included in the scope of delivery)- Workholding: Main spindle with hydraulic power chuck / collet system, SMW-Autoblok SLU-3-ZS hydraulic power chuck (clamping range 125-152 mm)- Steady Rest: SMW-AUTOBLOK / Original SMW Steady Rest (Type: SLU-3-28, Clamping range: 12-152 mm, Max. operating pressure: 60 bar)- SMW Autoblok steady rest: • hydraulic/self-centering steady rest • mounted on its own lower slide • suitable for providing additional support for long or thin workpieces- Tailstock unit with a rotating center on the right side of the work area for supporting longer workpieces- Hydraulic System: Integrated hydraulic power unit operating at 95 bar pressure- Automation / Gantry Loader: Promet Automation gantry loading system overhead- Coolant / Chip System: Knoll chip conveyor / coolant unit (YOM: 2004)- Chiller Unit: EMAG Chiller / Cooling Unit (YOM: 2016, Cooling capacity: 9.5 kW, Refrigerant: 2.5 kg)- Mist Collector / Air Cleaner: ELBARON / ISI RON / A 2500 Electrostatic Air Cleaner / Mist Extractor (YOM: 2004)- Documentation Included: Complete documentations, operating manuals, etc.- Transport Dimensions (L x W x H): Approx. 5460 x 2560 x 2400 mm (width reducible to 2450 mm)- Machine Weight: Approx. 13,500 kg Iijdpfjznc Nbjx Afheg Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Inductive sensor, electronic sensor, sensor cable, connection cable, link cable -Manufacturer: Wieland, Connection cable extension cable 24-pin -Type: unfortunately without a type designation Iiodpfjkvrp Nsx Afhsg -Length: 25 m -Transport dimensions: 640/600/H100 mm -Weight: 14 kg

Year of construction: 2020, condition: good (used), Fan, ventilator, electric motor, blower, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: ebmpapst, radial fan -Type: R3G250-RK55-05 -Voltage: 48 VDC -Speed: 2250 rpm -Power: 105 W -Number: 2x fans available -Price: per piece -Dimensions: 250/105/H265 mm -Weight: 2.1 kg Iodpfexn Nukex Afhjig

Condition: excellent (used), Year of construction: 1981, grinding length: 450 mm, grinding width: 200 mm, power: 1.5 kW (2.04 HP), input voltage: 200 V, Manufacturer Mitsui MGG CO.LTD Type: MSG-250M Year of manufacture:1981-10 Maximum grinding width: 200 mm Maximum grinding length: 450 mm Maximum table length movement: 500 mm Maximum table length movement: 250 mm Table movement per handwheel revolution: 6 mm /revolution Grinding spindle speed: spindle: 2900 rpm 50 Hz Standard grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 2900 rpm 50 Hz Iedpfswvga Njx Afhsig Grinding wheel bore diameter: 31.75 mm Electric power: 2 HP 1.5 kW 4P 200V 3 phase Weight, approx. 1050 kg

Year of construction: 1972, condition: used, machine/vehicle number: WIT, Technical data: 1x Vetter / Demag column-mounted slewing jib crane NL 250KG with Demag chain hoist Payload at full radius 250KG / 0.25to payload Iodsrwkbuspfx Afhjig Several cranes available (7 pieces) Height: approx. 3.75-4m Outreach: 3+3.9m Weight complete approx. 700KG incl. cable towing, undercarriage etc Swivel range 360°, connection to 400V 16A Optionally also available with 250KG chain hoist Crane is disassembled and immediately available Item location is 75053 Gondelsheim Further cranes are available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Condition: new, empty load weight: 380 kg, maximum load weight: 920 kg, overall weight: 1,300 kg, loading space length: 2,550 mm, loading space width: 1,280 mm, loading space height: 1,530 mm, tire size: 165R13, Plywood box body WEB40 from trailer manufacturer Unsinn. Iisdpjq Nzr Dofx Afhog The car trailer with plywood body made in Germany has white walls and a transparent roof. The box trailer is equipped with a lockable single-leaf door with espagnolette lock, support wheel, light roof, tubular drawbar and plastic-coated white walls. Accessories for this car trailer include ramps, lashing rails, rear supports, lashing eyes, tool box, anti-theft device, lashing straps and much more.

Condition: used, Woodmizer EG250 double-blade sawmill, like new, maximum 80 operating hours, 15 kW, saw blades, continuously variable feed. Isdpfx Afezqqn Dehoig

Condition: used, functionality: fully functional, machine/vehicle number: CF17E-55235, Year of construction: 2022, operating hours: 3,887 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, power: 41 kW (55.74 HP), fork length: 1,200 mm, empty load weight: 4,020 kg, total length: 2,560 mm, drive type: Erdgas, construction width: 1,150 mm, Natural gas forklift Chassis number: CF17E-55235 Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 6.00-9 Rear tire condition: 80 - 100% Description: The unit has been refurbished both visually and technically. Maintenance, including replacement of transmission and engine oil, has been performed. UVV inspection has been renewed. Side shifter, 3rd valve, 4th valve, rear work light, roof covering, windshield, semi-cabin, heater, load protection grille, full free lift, CE certificate, seat heating, Semi-cabin including PVC side doors, Henmar oil bath pre-air filter, fingertip control Ijdpezhc Ahofx Afhjig

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 2 h, load capacity: 2,500 kg, lifting height: 3,300 mm, free lift: 100 mm, fuel type: gas, mast type: simplex, construction height: 2,145 mm, power: 41 kW (55.74 HP), fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 4,210 kg, total length: 2,560 mm, drive type: Treibgas, construction width: 1,150 mm, LPG forklift Load center of gravity: 500 Fork width: 100 mm Fork thickness: 40 mm Iedpfx Afoncrploheig ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: torque converter / automatic Technical condition: New Front tires Type: Superelastic Front tires Size: 7.00-12 Rear tires Type: Superelastic Rear tires Size: 6.00-9 Description: New device with a manufacturer's warranty of 24 months, but a maximum of 2,000 operating hours. The first entry applies. Immediately available. Sideshift, Fork positioner, rotator or similar optionally available at extra cost. 3rd valve, rear working lights, front working lights, load guard, full free lift, CE certificate,

Condition: used, This listing is for a Sartorius MSA4202S 8.2g-2500g Precision Balance The unit is in full working condition and is ready for immediate release. Modular design (part of the Cubis® series) – the system is built of a weighing module + display/control unit + interface modules, designed for flexible configuration. High-resolution colour TFT display + touchscreen interface, offering an intuitive user interface. Multiple interfaces standard: USB, Ethernet, RS-232, SD card reader for data transfer and traceability. Iiodpfx Ajxuu Hlofhjg Functions typically include: weighing, density determination, averaging, formulation, percentage-weighing, check-weighing, totalising. Assisted (and optionally motorised) levelling; the system detects inclination and assists the user in levelling the instrument. Automatic internal calibration (isoCAL) for improved stability and lower drift. GLP/GMP/traceability ready: audit trail functions, user profiles, etc

Condition: used, Technical details: z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm Iedpev U Un Hjfx Afheig workpiece dia. over support: 250 mm center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t

Condition: defective spare-parts repository (used), machine/vehicle number: IC1379, Year of construction: 2021, operating hours: 269 h, load capacity: 2,500 kg, lifting height: 4,520 mm, fuel type: gas, mast type: triplex, Equipment: 3rd hydraulic function, 4th hydraulic function, 5222166 Serial Number: B1601BY00044 Iodpfxszp Uans Afhoig Fuel injection problem, wires are not on their place

Year of construction: 2008, condition: ready for operation (used), Two Index CNC turning and milling centers are available. 1) Index G250, year of manufacture: 2008, swing diameter: 560mm, turning length: 800mm, bar capacity: 90mm, spindle diameter: 140mm, spindle speed: 3500rpm, spindle power: 43kW/57kW, torque: 275Nm/363Nm, indexing: 2.5°, tool speed: 6000rpm, tool drive power: 11kW, X/Z travel: 300mm/800mm, rapid traverse X: 30m/min, rapid traverse Z: 22.5m/min, feed force X/Z: 7200N/9000N, quill diameter: 65mm, machine dimensions X/Y/Z: approx. 7300mm/4000mm/2600mm, weight: approx. 14000kg, control: Siemens 840D C200-4D. 2) Index G300, year of manufacture: 1998, retrofit: 2022, turning diameter: 270mm, turning length: 710mm, max. swing diameter: 590mm, main spindle bore: 65mm, spindle diameter: 110mm, spindle speed: 5000rpm, torque: 275Nm, power: 43kW, tailstock center distance: 740mm, max. thrust force: 10kN, short slide travel X/Y: 215mm/180mm, short slide travel Z: 710mm/1250mm, feed force X/Y/Z: 8kN/16kN/13kN, rapid traverse: 20m/min, tool stations: 12. Documentation available. An on-site inspection is possible. Iisdpfeznmxmex Afhjg

Condition: used, functionality: fully functional, machine/vehicle number: 100024953, Year of construction: 2001, operating hours: 4,455 h, load capacity: 2,500 kg, lifting height: 4,680 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,210 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Chassis number: 100024953 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire condition: 80 - 100% Rear tire condition: 80 - 100% Iijdey U R A Eepfx Afhsg Description: For sale is a Jungheinrich DFG 25 BS diesel forklift. The forklift is ready for use and fully functional. The visual condition is normal and the technical condition is good. The unit is available immediately. Fast and uncomplicated transport is possible upon agreement. Errors and prior sale are reserved. Sale is made without any warranty or guarantee. Fork, side shifter, 3rd valve, 4th valve, full cabin.

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 117 h, load capacity: 25,000 kg, lifting height: 3,500 mm, free lift: 1,750 mm, fuel type: diesel, mast type: duplex, construction height: 3,670 mm, power: 185 kW (251.53 HP), fork length: 2,400 mm, drive type: Diesel, Diesel Forklift Load centre: 1200 mm Fork width: 250 mm Fork thickness: 110 mm Mast type: Duplex Transmission: Dana TE14000 Condition: New equipment Technical condition: New Front tyre type: Pneumatic Front tyre size: 14.00 x 24 Rear tyre type: Pneumatic Rear tyre size: 14.00 x 24 Side shifter, fork positioner, 3rd valve, 4th valve, Kalmar comfort cabin: EGO air conditioning ECC with fresh air filter, tinted windows and laminated safety glass windscreen, door holder for open door (left side), sunblind for roof window, air-suspended and reinforced leather Grammer Actimo XL driver's seat with seat heating, lap belt and horizontal suspension, Radio with DAB+/CD/RDS/MP3/USB/AUX/Bluetooth/hands-free/streaming, 12/24V power inverter incl. 2 x 12V and 2 x 24V sockets, load weight indicator in display, direction selector switch integrated in lift hydraulic lever, 2 additional external mirrors mounted on B-pillars, LED rotating beacon, height adjustable, KALMAR SV/GV carriage with centre level compensation, width B = 3,000 mm, Kalmar forks, fork length l = 2,400 mm, fork cross-section b x a = 250 x 110 mm, Terminal-West quick-change system for SV/GV fork carriage, forks tapered 500 mm from fork shank to 15 mm at the tip, elevated air intake for air filter incl. pre-separator, engine heater 220V, accumulator for lift hydraulics, separate tanks for brake and working hydraulics incl. hydraulic oil cooler, mudguards on drive axle, mudguards on steering axle, anti-slip coating on front wheel covers and tank, 2 extra LED headlights in mast below standard headlights, 2 extra LED headlights on front cab corners oriented in driving direction, 6 extra LED headlights on rear cab corners with guard, 2 extra LED headlights on wheel covers, electronic inching - enables precise low-speed driving with simultaneous full lift speed, acoustic reverse warning signal - multi-frequency bass tone (only audible in the immediate vicinity of the machine), automatic central lubrication system on steering axle and fork carriage, 6 kg (powder) fire extinguisher EN3, reversing camera mounted on cab roof with monitor (colour) in cab, mast camera linked to the in-cab monitor (in combination with reverse camera), Monitor HD 7 QUAD-view, tyre pressure monitoring integrated in display. Ijdpfxezt T Dgj Afhjig

Year of construction: 2000, condition: good (used), machine/vehicle number: Nbg, Only brackets available !!! 1x steel chain hoist with 2 load strands each 125KG with a Müller Martini pneumatic stacking tongs - gripper - lifter bundle Camp type 0277.0401 including chassis for mounting on Stahl KT2000, ABUS HB, or Demag KBK For paper, pallets, cardboard boxes etc. Chain hoist with 2 lifting speeds (fine lift), lifting height/chain length approx. 4m Iiedpfjhy Eqhjx Afheg Weight complete approx. 150 kg Connection to 400V 50Hz Good condition, fully functional Different years of construction, about 20 pieces available! Item location is 75053 Gondelsheim See pictures Shipping by forwarding agent or pick-up

Condition: used, Bosch Rexroth Pressure Reducing Valve NG 25 DR20-6-4X/315YM Manufacturer: Bosch Rexroth Condition: Used Type: Pressure reducing valve Model: DR20-6-4X/315YM Nominal size: NG 25 Iisdpfjzcw T Sjx Afhsg Series: 4X Design: Direct-acting pressure reducing valve Maximum operating pressure: 315 bar Mounting type: Subplate mounting Hydraulic connection pattern: ISO 4401 NG 25 Actuation: Adjustable via setting screw Application area: Hydraulic systems, presses, machine tools, and industrial hydraulics Function: Reduction and maintenance of a set secondary pressure