Used Cylindrical Roller Bearing Inner Ring for sale (16,119)

Condition: used, Year of construction: 2017, operating hours: 1,751 h, Bomag BW 154 ACP-4i AM combination roller, year of manufacture: 2017, operating hours: only 1,751 h, engine: Kubota [55.4 kW/75 PS], Asphalt Manager 2, asphalt cutter on both sides, weight: 7,400 kg, smooth drum, good condition, ready for immediate use. Upon request, we will provide you with a leasing or financing offer; Mr. Mihm (Tel. will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Rental possible. Prjdpfx Aezq Tztsazjb = Further information = Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2004, grinding diameter 250 mm grinding length 650 mm centre height 125 mm Maschine wird mit Wartung und neuer Geometrie verkauft Betriebsstunden bisher 12260 Prsdpfjywntyox Aazsb Reitstock mit Feinverstellung Schleifspindelstock schwenkbar mit 5° Hirtverzahnung Papierbandfilter Marposs Messeinrichtung Innenschleifeinrichtung

Condition: used, Year of construction: 1990, grinding diameter 200 mm grinding length 340 mm centre height 100 mm Control CNC 25 kVA voltage 110 / 220 / 3x165 / 3x380 VAC control voltage 24 VDC Predpfx Aasywnt Hszeb

Condition: used, grinding diameter 250,350,450 mm grinding length 1500 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ± 6 ° longitudinal feed of the table 1750 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 80 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und neu lackiert mit original Elektrik jedoch neuer WSS Antrieb und Regler in Drehstromtechnik. Optional mit Spritzschutztüren und bedienpult vorne siehe Foto 1000U. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Schwenkwinkelanzeige Obertisch -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm Inklusive: -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den Pjdpfx Asd Ih Dvoazsrb grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, grinding diameter 250,350,450 mm grinding length 1000 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±8 ° longitudinal feed of the table 1300 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrically overhauled with new paint and original electrics. Foto of a 600U which we already have delivered. -Digital display in 2 axes. Resolution of x-Achse 0,5my Options: -Encoder with digital display in workpiece spindle head -Encoder with digital display in grinding spindle head (Height adjustment with spindle not possible) -New stable internal grinding diameter 80mm oder 100mm with height-adjustment. -Increase the center heigh to max. 225mm -Speed control of the grinding spindle Including:: Predpst Ii Nuofx Aazsb -Adjustment tool -Draw tube for chucks other accessories on reqeust Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm weight of the machine ca. 3 t High-End Kellenberger 1500U Ideal for spindle producer or overhauler -BEMA Internal grinding device with separate, cooled motor. Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when it is in position. A quantum leap in safety -Infinitely variable grinding spindle speed 1000-1500 rpm -Infinitely variable internal grinding spindle speed 0-100%. -Digital display of grinding spindle speeds -Swivelling angle display top table -swivel angle display grinding headstock -Marposs gaper sensor for external grinding only -fluid gating sensor Marposs internal grinding -Center height up to 250mm possible Machine is already delivered. Identical machine can be built with additional with additional options. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 Prodpfx Aast Ii Rrezeb genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm 500mm grinding wheel diameter New servomotors in x and for the workhead. Podpsuwv Idefx Aazsrb Photo of already delivered machine in UR equipment. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for training. -Diagnostic function with display of PLC information and digital I/O -Dressing function can be extended or changed at the customer's request. -Oriented spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Rotary encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -Increase of the center height to max. 225mm -Speed control for the grinding spindle Translated with (free version)

Condition: used, grinding diameter 250,350,450 mm grinding length 1000 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±8 ° longitudinal feed of the table 1300 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your o von Kürzlich gelieferten Maschinen mit zusätzlichen Optionen wie: -Spritzschutztüren -Kabine x-Achse -Schwenkwinkelanzeige Schleifspindelstock Geometrisch überholt und neu lackiert mit original Elektrik. Maschine hat Zentralschmierung und Rollenführung in der Flachbahn der x-Achse sowie Luftabhebung im Schleifspindelstock serienmäßig. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Inklusive: -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Predpfxeuxftxj Aazeb Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Psdpfxeuxfuco Aazjrb Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled Prodpfxouxfu No Aazsb B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2002, grinding diameter 250 mm grinding length 400 mm centre height 125 mm Control Fanuc 21i-T Maschine gewartet und teilüberholt. Pjdpfx Ajvx Dvujazsrb -Neue Schleifspindellagerung -Neue x-Achs Spindel -Obertisch überschliffen -Neue Geometrie Tischgeometrie -Neue Geometrie WSS zu Schleifspindeln B-Achse mit 1° Hirth Verzahnung Längspositionierung HF-Innenschleifspindel GAP Papierbandfilter

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, total width: 2,500 mm, total length: 5,600 mm, total height: 2,300 mm, type of input current: three-phase, feed length X-axis: 430 mm, feed length Y-axis: 1,500 mm, grinding spindle motor power: 20,000 W, overall weight: 7,400 kg, input frequency: 50 Hz, controller manufacturer: Sinumerik 840D sl, drive type: Siemens Sinamics S120, control type: CNC control, Schaudt precision for shafts up to 1500 mm in length and 500 mm in diameter – completely overhauled and modernized by Serwema Retrofit Solutions, Chemnitz. The PF5 is one of the most reliable external cylindrical grinding machines in its class: rigid bed, 20 kW grinding spindle, 600 kg between centers. Serwema completely rebuilds it, with a Siemens Sinumerik 840D sl, Sinamics S120, direct measuring systems in X and Z, and an automatic B-axis that swivels the grinding spindle from -45° to +225°: longitudinal, face, and taper grinding, shoulder grinding, and with an optional internal grinding spindle, also boring – in a single setup, without manual retooling. Proven Schaudt mechanics, new electrical systems, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, inspected in Chemnitz together with you. The user-friendly interface guides the operator through work piece, wheel, and cycle data screens without the need for programming. Marposs balancing and dressing systems reduce non-productive time and protect the grinding wheel; grinding wheels up to 600 mm in diameter and 125 mm in width with a peripheral speed of 50 m/s allow for high material removal rates during rough grinding and the finest surface finishes during finishing. Application areas: shafts, spindles, rollers, hydraulic pistons, and gear components in mechanical engineering, drive technology, the printing and paper industry, and contract grinding shops. Technical data: max. grinding length 1500 mm, max. grinding diameter 500 mm, work piece weight between centers 600 kg, max. grinding wheel Ø 600 mm, max. wheel width 125 mm, peripheral speed 50 m/s, grinding spindle power 20 kW, X-axis travel 430 mm, B-axis swivel range -45° to +225°. Dimensions approx. 5.6 x 2.5 x 2.3 m, weight approx. 7.4 t. Scope of supply: new Siemens Sinumerik 840D sl control with Sinamics S120, air-conditioned switch cabinet manufactured in-house, direct measuring systems for X and Z, user-friendly interface, automatic B-axis, balancing and dressing (Marposs), machine enclosure with state-of-the-art safety technology, lubrication and hydraulic unit, new paint finish RAL 5015/7035, geometry inspection according to manufacturer's standard with protocol, operating manual. Options: internal grinding spindle, paper band filter with or without magnetic separator (Polo or Filtec), installation and commissioning, operator training. Prodpfjz E H Itex Aazjb

Condition: used, functionality: fully functional, power: 18.5 kW (25.15 HP), color: orange, overall weight: 2,510 kg, operation weight: 2,190 kg, Year of construction: 2019, operating hours: 1,800 h, Hamm HD10 VT Combination Roller Year of manufacture: 2019 1,800 operating hours 18.5 kW Kubota engine 2,190 - 2,510 kg Edge cutting wheel Predpfx Aez E Ru Reazob

Year of construction: 2003, condition: used, Number of spindles: 5, ring diameter: 200mm, bobbin length: 550mm, compressed air connection: 6-8bar, compressed air consumption: 0.5l/s, voltage: 380V, frequency: 50Hz, connected load: 6kW, CE marking present, an on-site inspection is possible. Prjdsz Dkifepfx Aazsb

Year of construction: 1998, condition: used, Ring diameter: 200mm, bobbin length: 550mm, connected load: 13kW, mains connection: 380V, three-phase connection: N + PE, an on-site inspection is possible. Prsdpez Dkirofx Aazjb

Condition: excellent (used), Original German-made PFAFF 134-0-6 sewing machine, equipped with a cylindrical arm, designed for sewing leather goods, haberdashery, footwear, bags, belts, and other products requiring sewing on a cylindrical arm. Technical specifications: Manufacturer: PFAFF Model: 134-0-6 Cylindrical arm Foot-operated drive with motor Power supply: 220 V Motor power: 370 W Motor speed: 2800 rpm Pjdpfezgnxxsx Aazsrb Work table included Made in Germany Applications: leather goods industry, leather products, bags, belts, covers, footwear. Condition: Used machine. Visual condition as shown in the photos. Sold exactly in the condition as presented in the photographs.

Condition: excellent (used), For sale: a glue roller from Karl Tränklein, a renowned German manufacturer of bookbinding machines. This device is designed for the precise and uniform application of glue to paper, cardboard, corrugated board, veneer, and other flat materials. The machine is equipped with an electric drive, a metal working roller, and adjustable glue application settings, allowing the operating parameters to be adapted to the type of material being processed. Its robust, heavy-duty construction ensures stability and long-term durability. Technical specifications: Manufacturer: Karl Tränklein Country of origin: Germany Type: glue roller / applicator Drive: electric Power supply: 400 V Adjustable glue application Metal working roller Work table with guides Drip tray for excess glue Heavy-duty, robust construction Applications: bookbinding, printing, packaging production, gluing paper, cardboard, and corrugated board, applying glue to veneer and other flat materials. Condition: used, fully functional. It shows normal signs of wear and tear from use. The visual condition and completeness are consistent with the photos. Podpeziwx Tjfx Aazsrb

Year of construction: 2014, condition: used, Technical data: - Manufacturer: Cefla - Type: TR 3000 - With own control cabinet - Feed speed adjustment ~ 2,2 - 20m/min. - Emergency Stop - Display converter - Year of manufacture: 2014 - Transport length: 3,000 mm - Working width: 1,300 mm Predpfx Aaoyatdzszob - Roller length: 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 65 mm - Roller pitch: 125 mm - Adjustable feed (manual): 3-15 m/min - Installed power: 0.8 KW - Location: in storage

Condition: good (used), The scope of supply includes: 1x roller conveyor stand, used Overall width with base plates: 475 mm Frame width: approx. 445 mm Minimum height: approx. 640 mm Maximum height: approx. 870 mm Overall depth with base plates: approx. 160 mm Predpfxsilg Evo Aazjb Frame profile dimensions: C 80 x 35 x 12 mm Connecting strut dimensions: approx. 380 x 60 x 50 mm Mounting plate dimensions: approx. 140 x 135 x 3.00 mm Bore diameter: approx. 9 mm Bore spacing: approx. 100 mm Frame profile material thickness: approx. 2.50 mm Material color: Sendzimir galvanized

Condition: used, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a used upright frame for roller conveyors for sale here. When placing an order, please specify the required upright heights and upright depths! The scope of delivery includes: 1x Upright frame, used Material color: completely galvanized Upright height: 250 to 700 mm (freely selectable by you) Prodpfedf S Eyjx Aazeb Upright depth: 300 to 700 mm (freely selectable by you) Other heights and depths can be manufactured upon request. Our services at a glance: (Prices upon request) - Assembly, installation Please note our general assembly conditions. - Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234, visual inspection for all racking systems. - Delivery with our own fleet (without unloading) Shipping costs upon request!

Condition: used, Year of construction: 2003, - Manufacturer: Cefa/Sorbini - Type: SMARTCOATER REVERSE MF - Two application units, one in REVERSE - Year of manufacture: 2003 - Working width: 1.300 mm - Working height: 880 mm - 940 mm - Workpiece height ~ 3 - 80 mm - Operating side: right - Paint application shaft 50 - 60 Shore - Roller diameter: 250 mm - Metering roller: 173 mm - Double diaphragm pump 1 piece for both application machines - Transport system with roller conveyor - Roller conveyor pitch: 150 mm - Roller diameter: 100 mm - Compressed air connection: 6 bar Predpfszmh Erjx Aazob - Compressed air consumption: 54 NL/min. - Machine length: 1.640 mm - Machine width: 3.000 mm - Mobile on flanged rollers - Feed speed: ~ 4 - 20 m/min - Application quantity ~ 4 - 50 g/m² - Machine weight 2.520 kg - Control cabinet on the machine, traveling with it - With chassis - Total power 5.5 W / 30 A - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: used, Second-hand KUPER RFG roller shutter guide milling machine for milling the roller shutter guide slots into the roller shutter guide strips / roller shutter guides / roller shutter guide rails, fitted with a Scheer HM 16 hand-held router. Technical data: Pedpfx Aszza A Ssazjrb - Speed: 18,000 rpm - Power: 2,000 W

Condition: used, Tschudin HTG310 Universal Cylindrical Grinder Centre height: 100mm Distance between centres: 340mm (13.4") Maximum grinding diameter: 200mm Maximum grinding length: 340mm Hydraulic table traverse Table swivel: ±11° Wheelhead swivel: ±5° Workhead swivel: 360° Pjdpfozrt Ipox Aazerb Infinitely variable workhead spindle speed: 50–500 RPM Automatic plunge and traverse grinding cycles Automatic infeed with adjustable spark-out timer Rapid wheelhead advance and retract Hydrodynamic wheelhead bearings for exceptional accuracy Grinding wheel size: 350 x 50 x 127mm (14" x 2" x 5") Fitted With Hydraulic table drive Universal workhead Tailstock Coolant system Wheel guard Machine lighting

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long Prjdpfxongz N Is Aazjb 1 piece 140 mm Ø x 190 mm Ø x 173 mm long

Condition: good (used), 19 heavy-duty conveyor rollers 238 mm Ø x 600 mm roller shell length with 40 mm Ø shaft and 2 pedestal bearings, with chain wheel 16 B1/Z= 17, 1 geared motor drive with fluid coupling, if required also 6 spiral rollers for right-hand discharge 238/266 mm Ø x 900 mm Prsdpfx Ajwb A Hvoazjb