Used Ecoline 100-Xsr for sale (23,421)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: Pjdpfsy Hkd Hsx Adlsgk - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2024, lifting height: 18,000 mm, fuel type: diesel, Weights Empty weight: 3.310 kg Functional Lifting capacity: 250 kg Working height: 2.000 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 10500 m Max swing of platform in degrees: 360 Transport dimensions (LxWxH): 6,68 x 2,34 m (LxH) Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: Ecoline RS200 Year of build: 2024 Condition: New Pgodpfxex Sx Nze Adljk Data: Max. working height: 20,00 m Max. platform height: 18,00 m Max. reach: 10,5 m (120 kg basket load) Max. reach: 8,1 m (250 kg basket load) Dimensions: 6,68 x 2,34 m (LxH) Platform dimensions LxW: 1,30 x 0,70 m Max. basket load: 250 kg Swivel range: 360° Max. Inclination: 1° Max. hand force: 400 N Own weight: 3.310 kg Total permissible weight: 3.500 kg Driving license category: B Special features: on Mercedes Sprinter 351 CDI Information: TÜV and UVV new, new machine without registration

Condition: used, Year of construction: 2014, Suitable for extracting oil mist. Pedpewnprxsfx Adljgk Nominal volume flow: 950 m³/h noise level: 71 dB (A) number of revolutions: 2850 rpm Dimensions W x D x H approx.: 525 x 592 x 781 mm Weight approx.: 55 kg Connected load approx.: 0.75 kW (400 V / 50 Hz), colour: Grey

Condition: excellent (used), Desposer kitchen waste disposal unit, waste shredder, garbage chute -Power: 0.75 kW Pgsdpjb A Hp Iofx Adljk -Voltage: 230/460 V -Speed: 1725 rpm (60Hz) -Connection: Ø 170 mm -Quantity: 2 available Price: per piece -Dimensions: 230/H440 mm -Weight: 20 kg

Condition: good (used), mileage: 150,113 km, power: 400 kW (543.85 HP), first registration: 10/2020, fuel type: electric, axle configuration: 6x2, wheelbase: 44,950 mm, fuel: electricity, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2020, Equipment: central locking, cruise control, = Additional Options and Accessories = - Rear work lights - Front work lights - Windscreen - Enclosed cab - Cab - Automatic heating system = Notes = Volvo FE Electric - 6x2*4 - BDF - Full Air - 100% Electric - Low Mileage MY: 26-10-2020 KM: 150,113 YV2VB40C9LZ132195 100% Electric - Zero emission BDF Full air suspension Pjdpoy Hrwbofx Adlegk Rear steering axle Alloy wheels Low mileage = Further Information = Front axle: Max. axle load: 8,000 kg; Steered Rear axle 1: Twin tires; Max. axle load: 11,500 kg Rear axle 2: Max. axle load: 7,500 kg; Steered Unladen weight: 9,825 kg Payload: 17,175 kg gross vehicle weight: 27,000 kg Technical condition: good Visual condition: good Please contact VAEX The Truck Traders for more information.

Condition: good (used), Year of construction: 1995, Used Colchester CNC lathe Type: Tornado 100 Max turning diameter: 420 mm Max turning diameter over support: 297 mm Max working diameter: 186 mm Max turning length: 350 mm Drive power: 5.5/7.5 kW Spindle bore: 61 mm 12-position tool changer with VDI 3425/Round 30 Fanuc O-T control Podpfx Asy Atq Iedlogk Year of manufacture: 1995 Incl. tool holder Excl. tools

Condition: good (used), electric motor, three-phase motor Pedpfx Adey D Ikxoljgk -Manufacturer: AEG, electric motor type AM 100 LT6 -Power: 1.5 kW -Speed: 920 rpm -Shaft: Ø 28 x 60 mm -Protection rating: IP54 -Design: B3 -Dimensions: 365/250/H210 mm -Weight: 23 kg

Condition: new, Year of construction: 2025, pressure 100 t Podpjxu Nv Ijfx Adljgk stroke 380 mm table surface area 1100x424 mm dayligth 180/750 mm distance between columns 1100 mm diameter of piston 90 mm

Condition: excellent (used), Working height: 100 mm Flat steel: 100 x 10 or 80 x 12 or 30 x 20 mm Square steel: 22 mm Round steel: 25 mm Angle steel: 100 x 10 mm Pgjdpfxsydbfhe Adlek Aluminum flat bars: 100 x 30 mm Required space: 500 x 600 mm

Condition: new, - Dimensions: 1370x190x2000 mm - Capacity: 100 trays - Weight: 109 kg - The steam sensors are designed to be connected to the exhaust of your oven and not to the outlet of the hood, then routed to a drain. - The drain must be connected at the bottom section. - The steam radiators do not operate with the hood suction system. - There is no fan connection. Pgodpfxey Hrf Es Adlok

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 5,5 kW dimensions of the machine (l x w x h) : ± 1.650 x 950 x 1.570 mm Pgodpfx Asy Alp Asdlok capacity : ± 1500 kg / h for blocks of max. ± 520 x 220 mm (w x h) 3 x 400 V

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Pgsdpjyuty Sefx Adljk Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: excellent (used), Machining Center MASTERWOOD TF 100 2.0 -used- Through-feed processing, Ball screw spindles on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in X-direction, Pick-up tool changer, Automatic central lubrication, Panel measuring sensor, New drill set, New grooving saw blade, Clamex option available, Door processing option available ----- Technical Data ----- Min. workpiece length X: unlimited, Min. workpiece length Y: 1,000 mm, Min. workpiece thickness: 60 mm, Number of vertical drilling spindles: 10 pcs, Number of horizontal double drilling spindles in X-direction: 2 pcs, Number of horizontal double drilling spindles in Y-direction: 1 pc, Saw blade diameter of saw unit: 120 mm, Number of tools in the changer: 6 pcs, Extraction port diameter: 150 mm, Compressed air connection: 6-8 bar, Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm, Weight: 1,500 kg Quality Information: - Full basic cleaning - Electrical system checked - Pneumatic system checked - Set according to manufacturer's specifications - Immediately ready for operation Pgjdpfsy Eylwsx Adlok

Condition: new, mileage: 1 km, power: 74 kW (100.61 HP), fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2026, General Information Number of doors: 5 Model year: 2026 Cab: single Technical Information Number of cylinders: 4 Engine displacement: 1,500 cc Condition Overall condition: very good Technical condition: very good Pgedjy E N E Tspfx Adlsk Optical condition: very good Damages: none Warranty Warranty: None

Condition: good (used), functionality: fully functional, Door lock milling machine SL 100 - with milling motors for faceplate and handle - with pneumatic clamps - 1.7 kW Podpfeygm Awsx Adljgk Transport available at extra cost!

Condition: good (used), Year of construction: 1997, pressure 100 t stroke 300 mm table surface area 500 x 1520 mm column travel between the guideways 1520 mm dayligth 680 mm pressure max. 244 bar weight of tools max. 270 kg ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l voltage 400 V total power requirement 7.5 kW weight of the machine ca. 2700 kg dimensions of the machine ca. 2630 x 1000 x 2350 mm current new price approx. 18.000 euros special price on request according to previous owner rarely in use Equipment: - robust electro-hydraulic workshop/bending press Pgjdpfjy Dh Nzox Adlsk * left right guided - with fixed working cylinder - Pressing depth adjustable by cams - Height-adjustable work table - 2x locking bolts for table fixation - 3x directional control valve supply-empty-return - Stepless adjustment of working pressure - 1x freely movable 2-hand operation - Original operating instructions

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15 + 30 m/sel tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Dust suction hood 2 x 75.0 mm motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.5 / 3.3 kW weight of the machine ca. 148 kg. range L-W-H 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch Pgedpsxab Dzofx Adlek

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm Pedpfx Aewwl I Iodlegk workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 1616, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 450 m/min, spindle speed (max.): 2,500 rpm, No reserve price - guaranteed sale to the highest bidder! Placing a bid commits you to collect the item within the scheduled period between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Pjdjy D Shnopfx Adlogk Travel X-axis: approx. 300 mm Travel Y-axis: approx. 300 mm Travel Z-axis: approx. 300 mm Spindle speed range: 40 to 2,500 rpm Table dimensions: 600 x 210 mm Number of feeds: 16 Feed rates: 28 to 450 mm/min Number of slots: 4 Tool holder: SK 40 MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 2,000 x 1,200 x 1,700 mm Machine weight: 1,000 kg EQUIPMENT Mounted vice (jaw width: 110 mm) Set of tool holders Milling cutters Collets Three-axis digital readout (manufacturer: FAGOR) External reference: 10

Condition: good (used), Year of construction: 2011, functionality: fully functional, pressing force: 100 t, stroke length: 315 mm, overall weight: 8,000 kg, Hydraulic Press Brake Manufacturer: BYSTRONIC Model: Xpert 100/2050 Year of manufacture: 2011 Technical Data Make: BYSTRONIC Model: Xpert 100/2050 Year: 2011 Press Force: 100 t Bending Length: 2000 mm Stroke: max. 315 mm Motor Power: 7.5 kW Dimensions: approx. L 3.10 x W 1.90 (plus support arms) x H 2.85 m Weight: approx. 8 t Pgjdpfx Aoy Ef Rxodljk Equipment: • Controlled axes: Y1, Y2, X, R, Z1, Z2 • PILZ Fast Bend light barrier • Controller: MMC BYBEND • Hydraulic tool clamping (top and bottom) • Hydraulic pressing table!!! • Movable support arms • CNC-controlled crowning • 1 upper tool, gooseneck, H 150mm, 80°, segmented • 1 lower tool V12 All information is supplied without liability. A demonstration in our showroom is possible at any time.

Condition: used, Year of construction: 2001, operating hours: 1,782 h, 2001 | Bomag BW 100 AC-3 | Used Combi Roller | 1782 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 36 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Pgodpfxoy H Sffs Adlsk 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40723 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2005, Horizon brochure production line consisting of: VAC-100 vacuum collating tower (2 units) SPF-20A stapling and folding module FC-20A front trimmer Technical data: Horizon VAC-100 – vacuum collating tower Function: Collating printed sheets Number of stations per tower: 10 (20 in total with 2 towers) Paper format: min. 120 × 148 mm, max. 350 × 500 mm Paper weight: 52–208 g/m² (up to 300 g/m² in some cases) Stack height per compartment: 55 mm Production speed: up to 9,900 sets/hour Control: touchscreen control panel Horizon SPF-20A – Stapling and folding module Function: Stapling and folding brochures Stapling heads: 2 × Hohner 48/5 Paper size: 120 × 180 mm to 350 × 500 mm Final format: 90 × 120 mm to 250 × 350 mm Stapling thickness: max. 4 mm (stapling only), max. 2 mm (stapling + folding) Stapling distance: 73–160 mm Wire diameter: 0.5 mm Production speed: up to 4,050 brochures/hour (A5), approx. 3,200 brochures/hour (A4) Power consumption: approx. 450 W Dimensions: 271 × 81 × 110 cm Weight: approx. 490 kg Pgedexpv Adopfx Adlek Horizon FC-20A – Front trimmer Function: Front edge trimming of brochures Brochure size: max. 250 × 20 mm; min. 85 mm Trim size: max. 20 mm Processing: min. 4 pages / max. 88 pages (at 80 g/m²) Production speed: up to 3,400 cycles/h Power supply: 230 V / 50 Hz, 0.2 kW Dimensions: 610 × 810 × 1,070 mm Weight: approx. 240 kg

Condition: like new (used), functionality: fully functional, type: HZOS 100/60/1200/D/FU perm. pressure: 250 bar Podeyxqmlspfx Adlsgk piston diameter: 100mm piston rod diameter: 60mm stroke: 1200mm

Condition: like new (used), functionality: fully functional, type: HZOS 160/100/1200/D piston diameter: 160mm piston rod diameter: 100mm stroke: 1200mm perm. Pressure: 250 bar Pgodpfx Ajyxqrbodlok

Condition: used, mileage: 23,850 km, power: 100 kW (135.96 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,280 mm, first registration: 04/2023, color: blue, number of seats: 2, Year of construction: 2023, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, sliding door, traction control, = Additional Options and Equipment = - Right-hand sliding door - Android Auto - Apple CarPlay - Attention assist - Automatic dipped headlights - Heated exterior mirrors - Passenger airbag - Bluetooth - Front electric windows - Electrically folding exterior mirrors - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Hill-hold control - Wooden loading floor - Height-adjustable driver’s seat - Height-adjustable steering wheel - Lumbar support - Front center armrest - Multimedia compatible - Fog lights - Emergency brake assist - Radio - Radio with DAB - Radio with DAB+ (WLZ1) - Rain sensor - Reversing camera - Immobiliser - Heat-insulating glass - Connected services - Partition wall = Further Information = General information Number of doors: 5 Model range: July 2020 - August 2022 Cab type: single Technical information Torque: 260 Nm Transmission Transmission: 1-speed automatic Performance Maximum speed: 130 km/h Dimensions Length/height: L2H1 Dimensions (L x W x H): 496 x 192 x 194 cm Weights Unladen weight: 1,837 kg Pgjdpox E U U Tjfx Adljk Payload: 1,028 kg Gross vehicle weight (GVW): 2,865 kg Max. trailer load: 1,000 kg (unbraked 750 kg) Battery Battery present: Purchased Battery capacity: 52 kWh Charging port: Type 2 Fast charging capability: Yes Fast charging socket: Combined Charging System Interior Interior: black Maintenance, history, and condition Service booklets: Available APK (vehicle inspection): valid until 04/2027 Number of keys: 2 (2 remote controls) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL