Used Ferag Bpr-Ecb Accumulation Belt for sale (9,725)

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally included: Gedpfxek Aba Ts Ag Tjuh Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 630-650-500 RA1478 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 630 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 2001 Guodpfxjk Abccs Ag Teh Optionally available: Supports Side guide one and both sides Prices net ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 640 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1300 mm Conveying angle: 20° degrees Support feet and Lateral guides on both sides optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37/1 DT71D4/MM3/BW1 Gedpfek Abcgox Ag Teuh Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2008, condition: good (used), quantity 1 STK 0 210 mm 0 1500 mm weight 135 kg Gedpfszy Sbwjx Ag Tjuh height 1900 mm length 1400 mm width 800 mm Conveyor (for chips / small metal parts). > CE marking present > Fill with oil before commissioning > Gearbox output — flanged drive, cylindrical shaft

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide belt sanding machine with cross and longitudinal units for sanding, including veneer prior to painting. CSD – Sanding system. Electronically controlled pressure bar for free, multi-track feeding. The machine is from a first owner, fully functional, well-maintained, and in very good technical condition. The conveyor belt has been replaced with a new one. Sanding width: 1300 mm Working height: 880 mm, constant Workpiece thickness: max. 3 - 140 mm Transport bed with individual conveyor belts Drive: 3.0 kW three-phase motor, incl. sanding belt cleaning device Feed speed: 4.5 - 22 m/min, adjustable Units: Cross/Longitudinal/Brush Gjdpfxsya I Rie Ag Teuh Brush roller unit, centrally adjustable in height Diameter: 150 mm Drive power: 1.5 kW Bristle type: Fibre 1. Cross sanding unit, fail-safe braking system, pneumatic belt tension, belt monitoring, pressure pad belt system, intermittent belt cleaning device Sanding belt dimensions: 4900 x 150 mm Belt sanding speed: 12 + 24 m/s Drive power: 13 / 17 kW 2. Longitudinal sanding unit Stepless, electronic control of the sanding belt speed via frequency converter, fail-safe braking system, pneumatic belt tension, intermittent belt cleaning device Belt control: infrared Sanding belt runs in reverse direction Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3 – 12 m/s Drive power: 11 kW Graphical operator terminal for entering machine setting values, including numerical thickness adjustment and display of fault sources, workpiece throughput, and feed speed Electronically controlled pressure bar for free, multi-track feeding Distance between guide rollers: 40 mm Pneumatic belt tension The contact surfaces of the pressure bar automatically adjust to the shape of the workpiece passing through Weight: approx. 5500 kg Space requirement: approx. 2550 x 2675 x 2400 mm

Condition: good (used), Year of construction: 2022, Telescopic belt conveyor, Caljan, 12m overall length, laterally movable on rails (the rails are screwed to the floor) – used: Price ex works: only €25,000 (net), including loading! Manufacturer: Caljan Year of manufacture: 2022 Project no.: 30-7322-00 Type: CB3M 5/7-600 Length when retracted: 5.10m Length when extended: approx. 12m Belt width: 60cm Serial no.: 215652 Rated voltage: 3 × 400 VAC + N + PE Guodpez Dt U Dofx Ag Teh Rated frequency: 50 Hz Rated current: 6.44 A Rated power: 2.47 kW Weight: approx. 2,000 kg Former new price: over €70,000 (net) Condition: good to very good Available: immediately Location: 86161 Augsburg

Condition: excellent (used), Year of construction: 1994, Motor data: 380 V - 50 Hz - 62 A 2 grinding units Brush Gusdpsgg R Trefx Ag Toh Electric height adjustment Grinding width: 1100 mm Operating pressure: approx. 8 bar Grinding belt length: 2150 x 1130 mm Weight: approx. 3500 kg Overall dimensions: W/D/H approx. 2100/2500/2300 mm

Condition: new, New unit Gedpfx Aed Tidxeg Tjuh MASS International NS3 Speciale Angle conveyor with separator available for short-term delivery Example as shown in the picture: L-shaped conveyor with double roller separator Infeed section 600 mm Inclined section 1300 mm Usable width 450 mm Overall width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the infeed section and in the incline PU belt, black, with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Lateral collection plates in the infeed section Also available as an option: angle conveyor with Super Grip belt and separator (see the last two photos) Double roller separator with covered belt drive equipped with Super Grip adjustable discharge chute

Condition: new, New equipment MASS International NPS accumulation conveyor Conveyor belt / accumulation belt available for short-term delivery Accumulation surface without side walls Height-adjustable, mobile on steerable swivel casters Gusdeizi S Dopfx Ag Teh Example: NPS 1 Length 1500 mm Usable width 250 mm External width 250 mm (without motor) Accumulation surface without side walls, therefore full usable width Height-adjustable discharge height 200 - 400 mm PU belt, smooth, black Belt speed 3 m/min Conveyor belt mobile on steerable swivel casters The quoted price refers to the NPS1. Optional: Dimensions according to any customer request Belt approved for food (FDA compliant) Modified belt speed Frequency inverter for stepless adjustment of the belt speed etc.

Condition: new, Year of construction: 2021, functionality: fully functional, The Z-shaped conveyor belt with plastic slats is for sale. A WhatsApp video of the belt is also available upon request. Infeed: 600 mm Grade: 1900 mm Gusdpfx Agowbm Tte Toh Discharge: 500 mm Usable width: 300 mm Discharge height: 1400 mm - 1600 mm Constant belt speed: 3 m/min Mobile Tread height: 50 mm every 380 mm

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,300 mm, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,150 mm, Heesemann JSM 1350 RC Surface grinding machine Built in 2025, new machine, currently the only exhibition machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Continuous feed: 3 - 12 m/min - Sanding units with separate motors and continuously variable sanding belt speeds up to 18 m/s - Table extensions at the infeed and outfeed - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Guedewcqr Ajpfx Ag Toh Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System EMS - Doors with glass inserts - LED lighting inside the machine - Vacuum table with preparation (drilled holes) for connecting the vacuum blower - Vacuum blower (inside the machine) - Workpiece cleaning with oscillating blower tube - CSD (magnetic pressure bar) The machine is connected and can be inspected on-site by appointment. Please do not hesitate to contact us if you have any questions.

Condition: used, TECHNICAL DETAILS - Belt width : 100 [mm] - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] Gujdpfx Agsu E U Tbo Toh - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: new, New device MASS International Angle Conveyor Belt NDS L Conveyor belt/assembly line Available at short notice Gusdpfx Aor A D S Eog Teh Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Condition: new, mileage: 1 km, power: 294 kW (399.73 HP), first registration: 01/2026, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 13,000 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional Options and Equipment = - Air conditioning Gusdpfx Agoyc Ryre Tjh - Front refrigerator - Toilet - USB connections - Webasto heater = Additional Information = Damages: none = Company Information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, with a large parking area that serves as our exhibition space. We always have a wide selection of buses in stock, in all brands, capacities, models, and at every price level. We can find the right coach, school, or city bus tailored to your needs and budget. All information is provided without obligation. Subject to errors, prior sale, and typographical mistakes. Opening hours for used bus viewings: Mon-Fri: 08:30 am - 12:00 pm, 12:30 pm - 5:00 pm. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sander (wet-type) equipped with 2 top-mounted sanding units and a brush unit (Scotch-Brite). The machine is used for surface processing of metal parts up to 450 mm wide. The dust collection container with filter fleece is located underneath. Godpoyn E H Refx Ag Tsuh The machine is in good, partially overhauled condition. Further technical information can be found in the documentation.

Condition: new, mileage: 1 km, power: 294 kW (399.73 HP), first registration: 01/2026, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 13,000 mm, total height: 3,460 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional Options and Equipment = - Air conditioning - Front refrigerator - Toilet - USB connections - Webasto heater Guedpfxox U Awus Ag Toh = Additional Information = Damages: none = Company Information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, with a large parking area that serves as our exhibition space. We always have a wide selection of buses in stock, in all brands, capacities, models, and at every price level. We can find the right coach, school, or city bus tailored to your needs and budget. All information is provided without obligation. Subject to errors, prior sale, and typographical mistakes. Opening hours for used bus viewings: Mon-Fri: 08:30 am - 12:00 pm, 12:30 pm - 5:00 pm. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, Year of construction: 2000, overall weight: 150 kg, terms of delivery: FCA Pegnitz delivery time: on request Gujdpfxex H Ttke Ag Tjh terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2012, Used Stadler Bunker Hopper Year 2012 Measures 10M Long x 2M Wide x 3M High The Sides Could Be Removed To Leave Only The Conveyor Excellent Condition Gujdozqvdqepfx Ag Toh Electric Motor / Gearbox Drive

Condition: excellent (used), CATALOGUE NUMBER: 7037 TECHNICAL SPECIFICATIONS: - Length of workpiece: 2780 mm - Width of workpiece: 800 mm - Main motor: 4 kW - Width of sanding belt: 150 mm - Fan - Right/left rotation - Electric table height adjustment - Diameter of dust extraction port: 140 mm - Overall dimensions (L/W/H): 3760x1440x1520 mm Guodjztv N Ejpfx Ag Toh - Weight: 502 kg FEATURES: – Unpainted – With fan – Electric table adjustment – Used sander, very good condition Net price: 9500 PLN Net price: 2200 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: new, Year of construction: 2025, Exhibition machine Year of manufacture: 2025 Equipment and technical data: MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: CYLINDER 2nd BELT: COMBINATION UNIT CYLINDER/SHOE FOR SOLID WOOD, VENEER, AND INTERMEDIATE GRINDING FOR LACQUERING - Usable WORKING WIDTH mm 1350 - BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - STEEL CALIBRATION CYLINDER mm 180 - Rubber-coated GRINDING CYLINDER mm 180 - GRINDING SHOE WIDTH mm 50 - BELT MOTOR POWER KW 14.7 - BELT SPEED m/s 18/16 - FEED MOTOR POWER HP 0.75 - Adjustable gearbox with steplessly adjustable feed speed m/min 4/20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 PCS. DRUM BRAKE for belt braking - Swiveling ROLLER for belt tension - 3 PCS. PRESSURE ROLLERS; with rubber coating Gusdpezh Rufsfx Ag Toh - EMERGENCY STOP SWITCH in the infeed area Availability: short-term Location: Flörsheim

Condition: used, functionality: fully functional, total length: 2,000 mm, motor manufacturer: SEW, Equipment: type plate available, Belt conveyor/conveyor belt Model/Type: Belt Condition: used Overall length: approx. 2000 mm Overall width including motor: approx. 1020 mm Conveyor width: approx. 900 mm Belt width: approx. 900 mm Belt type: Longitudinal grooves Frame height: approx. 90 mm Gujdpfx Aez Dx Eneg Toh Includes SEW motor 0.55 kW, r/min 1360/167 Material: Steel/Aluminum/Stainless steel Stock quantity: 13 pieces Price per piece Feet to be ordered separately The conveyor system was in operation until it was dismantled. Offers will only be provided upon presentation of a valid imprint; sales are only made to commercial customers. Internal article number: 2026092102 Thanks to the excellent workmanship of the conveyor system, your material will glide smoothly to its destination, even under high load. Custom-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare a customized offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully completed projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers. Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally disassembled and packed Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, Year of construction: 2013, overall weight: 100 kg, terms of delivery: FCA Pegnitz Guodpfozq Hqbjx Ag Tsh delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2023, total length: 13,600 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,910 mm, color: white, Year of construction: 2023, Equipment: ABS, Axle Configuration Tire Size: 385/65R22.5 Axle Brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear Axle 1: Max. axle load: 9000 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Rear Axle 2: Max. axle load: 9000 kg; Tire tread depth left: 80%; Tire tread depth right: 80% Rear Axle 3: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 90%; Tire tread depth right: 90% Weights Unladen weight: 6,100 kg Payload: 37,900 kg GVWR (Gross Vehicle Weight Rating): 44,000 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 09/2027 Technical condition: very good Optical condition: very good Guedpfx Ajzzyxmeg Tsh Identification License plate: OT-92-ZZ Additional Information Please contact Mark van der Steen for further information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2024, total length: 13,600 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, wheelbase: 8,910 mm, color: white, Year of construction: 2024, Equipment: ABS, Axle Configuration Axle Brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear Axle 1: Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Rear Axle 2: Max. axle load: 9000 kg; Tire tread depth left: 80%; Tire tread depth right: 80% Rear Axle 3: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 70%; Tire tread depth right: 70% Weights Unladen weight: 6,100 kg Payload: 37,900 kg GVW (Gross Vehicle Weight): 44,000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 03/2027 Technical condition: very good Gujdpfozzziajx Ag Tsh Visual condition: very good Identification License plate: OV-88-GJ Additional Information Please contact Mark van der Steen for further information.

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Belt width: 1370 mm Gjdpfxszwm Hce Ag Tsuh Belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed rate: 2.5 - 13 m/min (infinitely adjustable) Belt blowing system Dust brush Drives: Grinding unit: 15 kW Total connected load: 17 kW Weight: approx. 2400 kg Dimensions: 2000 x 1850 x 2100 mm Location: Nattheim