Folding machines (hand operated) bending length 1100-1599mm for sale
14
Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine
-Max. Working width: 600 mm
-Max. Sheet thickness: approx. 5 mm
-Opening width: 200 mm
- Clamping: via threaded spindle
Safl7oej
-Accessories: see photos
-Dimensions: 1010/1270 / H1800 mm
-Weight: 684 kg
13
ABKANTBANK-Technik Halver,
YOUR competent partner in the matter of BENDING BANKS
We are your contact for high-quality sheet metal processing.
As a distribution partner of the Polish manufacturer PROD-MASZ for many years, we respond to the needs of our customers on site and see ourselves as an extended arm of the production.
Appropriate machines can be demonstrated if required, in addition to competent advice and professional instruction.
We advise you individually - according to your wishes and ...
2
With segmented sharp bending tools, continuous bending bar and continuous bed pad Segments have a hardness of HRC24-26 TECHNICAL DATA Data Working width max. 1270 mm Bending angle max. 135 degrees Segment division 25-30-35-40-45-50-75-100-150-200-250-270 mm Dimensions and weights Length approx. 1600 mm Width / depth approx. 800 mm Height approx. 1130 mm Weight (net) approx. 340 kg Sheet thicknesses maximum sheet thickness steel 235 N / mm² 2.0 mm Max sheet thickness VA steel 1.2 mm Explanation ...
7
Max. Bending length: 1270 mm Max. Sheet thickness: 1.75 mm steel
3pciyl9b
chamfer lenght 2020 mm
plate thickness 1,5 mm
stroke of milling spindle 100 mm
Bwy3tlrflr
bending angle max. 0 - 135 °
weight of the machine ca. 1050 kg
dimensions of the machine ca. 2700 x 900 x 1370 mm
Heavy duty angle bending machine. The upper blade is segmented and the segments
can be taken out. The work piece is clamped through foot control, which leaves
both hands free. The machine is equipped with a cylinder and adjustable lower
blade, which makes bending sheet metal very easy. Eu...
10
sheet width 1270 mm
plate thickness 2,0 mm
distance between columns 1300 mm
daylight opening 48 mm
135 °
total power requirement Handbetrieben
weight of the machine ca. 0,4 t
dimensions of the machine ca. 1,6 x 0,9 x 1,2 m
Hclbsjwhu
Segment-bending machine
Segment widths:
25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.
5
Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine
-Max. Working width: 1280 mm
-Max. Sheet thickness: 1.75 mm
-Opening width: 180 mm
-Clamping via: threaded spindle
-Bending angle adjustable via: stop
-Dimensions: 1850/600/H1240 mm
Iw9mzncd
-Weight: 380 kg
14
ABKANTBANK-Technik Halver,
YOUR competent partner in the matter of BENDING BANKS
Appropriate machines can be demonstrated if required, together with competent advice and professional instruction.
We advise you individually - according to your wishes and look forward to your inquiry.
Press brake ZGR1250/0,8 of the company Prod-Masz on site to try out and take away immediately.
Technical data:
-working width 1270mm
-sheet thickness up to 0,8mm
non-ferrous metals 30% more sheet thickness
-Bending a...
1
With segmented sharp bending tools, segmented bending bar and segmented bed pad Segments have a hardness of HRC24-26 TECHNICAL DATA Data Working width max. 1270 mm Bending angle max. 135 degrees Segment division 25-30-35-40-45-50-75-100-150-200-250-270 mm Dimensions and weights Length approx. 1600 mm Width / depth approx. 800 mm Height approx. 1130 mm Weight (net) approx. 370 kg Sheet thicknesses maximum sheet thickness steel 235 N / mm² 2.0 mm Max sheet thickness VA steel 1.2 mm Explanation sh...
6
Max. Bending length: 1270 mm Max. Sheet thickness: 1.75 mm steel Special rails on request
Gwvoc8
1
chamfer lenght 1500 mm
plate thickness 1,5 mm
bending angle max. 135 °
weight of the machine ca. 360 kg
dimensions of the machine ca. 1700 x 710x 1270 mm
Heavy duty angle bending machine. The upper blade is segmented and the segments
can be taken out. The work piece is clamped through foot control, which leaves
both hands free. The machine is equipped with a cylinder and adjustable lower
blade, which makes bending sheet metal very easy. European design.
upper blade segmented
08vcqpo
cyli...
8
PRESS BRAKE - angle 180 * - KLINGHAMMER
B09292ucva
eccentric drive
developer: Klinghammer
maximum thickness: 1 mm
fold: 180 °
drive: 3 phases
pedal release
mechanical clutch
Perfect for signs and advertising materials
2
Product information "2.0 x 1270 mm folding machine"
the material to voltage is carried out with the foot, thus both hands remain free for the material feeding.
standard with high, slanted, segmented clamping beam.
the strong help cylinder facilitates bending of sheet metal up to 2.0 mm.
wide opening between the upper and lower beam of up to 52 mm.
self-lubricating bearings.
General description:
bending of molded parts
Counterbalance of the top clamping via springs
Counterbalance of the beam...
6
DEALER Company PROD-MASZ.
ABKANTBANK-Technik Halver,
YOUR competent partner in the matter of BENDING BANKS
Press brake ZGR1400/1,2 of the company Prod-Masz on site to try out and to take away.
You get on the spot professional instruction.
Technical data:
-working width 1400mm
-sheet thickness up to 1,2mm
non-ferrous metals 30% more sheet thickness
-bending angle up to 145
-Stop for preset bending angle
-degree scale
-bending beam: 15 mm
-passage: 80 mm
-Shelf for sheets
-Front depth stop
-Weight...
6
Swivel bending machine Fasti
type: 205-12-1,75
year 1982
Bending length 1270mm.
Bending capacity 1,75mm.
Upper beam can be swung out.
Manual back gauge.
B0pve9ttqc
(Angle stop is missing, see picture)
6
Folding lenght 1270mm
Folding thickness 2,0mm
for formed component bending
compression spring for top counterbalance
Cctpq09
cam lock and rebound spring for bending beam counterbalance
bow handle for bending beam rotation
adjustable bending angle stop with scale up to 135°
segmented top beam tools
segment size: 25, 30, 35, 40, 45, 50, 75, 100, 150, 200, 250 ,270 mm
Working areaWorking length 1.270 mm
Plate thickness (max.) 2 mm
Bending bar angle (range) 135°
Me...
1
Used RAS 62.30 Turbobend CNC Folder
Used RAS 62.30 Turbobend CNC Folder
Bk7l3muqyu
Year 2014
Sheet thickness 2mm,
Working length 3,200mm
back gauge depth 6 – 1,550mm, back gauge accuracy +/- 0.15mm, accessories
14
METAL PLATE FOLDING MACHINE ZGR1400/2
maximum working length1400 mm
sheet gauge up to 2 mm
approx. weight of the hand machine 180 kg
shear cutting on the whole working length
upper bar lifting in three positions
maximum clearance between bars100 mm
Lhr7n
2
Manual swing bending machine make HERA type U III
year of manufacture 1974
technical data:
bending length 1540 mm
largest sheet thickness at 40 kg 4,0 mm
smallest shelf height with largest sheet thickness 20 mm
opening width of the upper beam 350 mm
adjustability of lower and bending beam 125 mm
largest diameter for rounding 250 mm
outer dimensions approx. 2500 x 1000 x 2000 mm
weight approx. 1000 kg
Buctqnaic2
with
- counterweight
- hand wheel for height adjustment of the upper beam
used, in go...
6
Press brake ZGR1400/2,0 of the company Prod-Masz on site to try out and take away.
You get on site professional instruction.
-working width 1400mm
-sheet thickness up to 2,0mm (non-ferrous metals)
-bending angle up to 145
-Outlet: 80 mm
-degree scale
-stop for preset bending angle
-Shelf for sheets
-Front depth stop
-Weight approx. 175kg
-Certificate CE
-12 months warranty
Accessories - Roller shear(up to 0,8mm) 290EUR
Bbw9cvs8rv
Shipping within Germany 100EUR
All prices are to be considered wit...
6
The swivel bending machine segmented upper beam Habusch HBB1270 is ideal for the craftsman, do-it-yourselfer or other company.
Data
-segmentierte Oberwange (25,30,35,40,45,50,75,100,150,200,250,270)
-bending length 1270mm
-bending thickness 2.0mm (material 400N/mm²)
-opening width approx. 50mm
-Weight approx. 380Kg
-bending angle 0-135°
-with backgauge
-Workpiece clamping with foot pedal
-external dimensions: WxDxH (mm): approx.1600x1200x1200
Sg27qr7z
1
Technical data:
Bi0y7mv2oj
Sheet thickness 2.0 mm
useful length 1020 mm
Stroke of the upper beam 300 mm
Adjustability of lower and bending beam 100 mm
6
Finger bending machine with segmented top clamp Including manual back gauge PNEUMATIC CILINDER !!! Max. bending capacity over the entire working length ----- 2 mm Max. working length ----- 1270 mm Max. opening width ----- 45 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. bending angle ----- 0 - 135 Weight ----- 360 KG Width ----- 1620 mm Depth ----- 850 mm Height ----- 1175 mm
Mvsk9g
15
Folding bench bending machine with cutouts in cheeks, with the possibility to finish bending window sills on three sides.
Cutouts from 6 cm up and 6 cm down. This modern press brake has a lot of space inside and a narrow 15 mm bending beam.
The offered bending machine Red 2700 / 1.0 is an alternative to the segment bending machine for less complex work.
We get this possibility thanks to the construction with special cutouts.
This machine performs bending operations from the top up and down.
The...
3
AYEL-TECH FINGERING MACHINE
TYPE VZB 1260 x 2
Oxbix
- Capacity 1260 x 2 mm
- Upper blade in segments
- Max. bend angle 135
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
2
Capacity 1020 x 2,5 mm (ST37)
Biivgbn7vb
Delivery of the upper beam by feet clamping
High segments in the upper beam
Bending and lower beam are segmented too
RAL 7016 paint
Manufacturing EU
immediately available ex works
Freight costs on request
5
The swivel bending machine 2-fold segmented HBB1270-2A is ideal for the craftsman, do-it-yourselfer or other company.
Data
-segmented upper cheek and lower cheek (25,30,35,40,45,50,75,100,150,200,250,270)
-bending length 1270mm
-bending thickness 2.0mm (material 400N/mm²)
-opening width approx. 50mm
-Weight approx. 380Kg
-bending angle 0-135°
-with backgauge
-Workpiece clamping with foot pedal
-external dimensions: WxDxH (mm): approx.1600x1200x1200
S7ilfp
3
1 used manual swivel bending machine
Fabr.Fasti
Type 204-12-1.75
Working width 1270 mm
max.sheet thickness 1,75 mm
Onoiv
6
Upper and lower blade removable in segments Including manual back stop PNEUMATIC CILINDER !!! Max. zetcapaciteit over de hele werklength ----- 2 mm Max. werklength ----- 1270 mm Max. opening width ----- 46 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. zethoek ----- 0 - 135 Weight ----- 380 KG Width ----- 1600 mm Depth ----- 850 mm Height ----- 1175 mm
Bp9ba9ti80
15
This model SGR-1250 is characterized by removed upper and lower segments and also the bending beam is divided into segments. In addition, a foot lever is installed to open the upper bending beam.
- Segments of an upper and lower clamping arm expand the application possibilities,
- Blocking with the help of a pedal, the hands are free and you can freely position a sheet,
- bending bench for universal use in repair and bodywork workshops,
- compactly built, modernly shaped,
- manual bench for sta...
8
The press brake is the ideal device not only for roofers and tinsmiths, but also for manual workers and do-it-yourselfers, who can use many functions of the press brake in their daily work.
Pnaxl
Here we present our ZGR-1400/1,2/145° press brake.
Technical specification:
- maximum working width: 1400 mm
- bending capacity: up to 1,2 mm (steel sheet)
- non-ferrous metals 30% more bending capacity (aluminium and copper sheet up to 1,5 mm)
- bending angle: max. 145 degrees
- Bending beam thickness:...
14
Bernardo swivel bending machine with segmented clamping beam TB 1270
Working length 1270 mm
Max thickness of sheet metal (400 N / mm2) 2.0 mm
Maximum opening width 45 mm
Bending angle 0-135 °
Width 1620 mm
Depth * 1115 mm
Behwplbmgd
Height 1150 mm
Weight approx. 340 kg
* with Backgauge
Properties
Universal bending machine for sheet metal working and repairers
Robust construction in modern design
Slight adjustment of the upper beam by means of foot pedal, hands are free for the workpi...
3
gebr. manual swivelling bending machine
Vtzfxa
make FASTI
model 204-12-1,75
machine no.: 8624051
year of construction 1986
folding length 1270 mm
sheet thickness 1,75 mm
Opening width upper beam 220 mm
outer dimensions:
Width 2000 mm
Depth with stop 1000 mm
height 1300 mm
Weight approx. 530 kg
With rear stop
1
Manual swivel bending machines
Working length 1.270 mm
Sheet thickness (max.) 2 mm
Angle range of the bending beam 135
for bending of shaped parts
Weight compensation of the upper beam via compression spring
Weight compensation of the bending beam via eccentric and tension spring
swivelling movement of the bending beam via bow handle
Pvig2y
adjustable bending angle stop with scale up to max. 135°
segmented tools of the upper beam
segment sizes: 25, 30, 35, 40, 45, 50, 75, 100, 150, 200, 250, 270...
6
Finger bending machine with segmented top clamp PNEUMATIC CILINDER !!! Max. bending capacity over the entire working length ----- 1.5 mm Max. working length ----- 1500 mm Max. opening width ----- 48 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. bending angle ----- 0 - 135 Weight ----- 430 KG Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm
Vumwgnlj
14
Sheet metal folder directly from polish manufacturer Prod-Masz.
Plate Bending Machine ZGR-1400/1.2mm
Technical data:
2jvx7umcu
- Maximum working width: 1400 mm
- Sheet gauge up to: 1.2 mm (Steel)
- Max. bending angle: 145 degrees
- Rotary shears cut to full working length
- Thickness of bending bar: 15 mm
- Protractor
- Weight: 150 kg
- Rotary shears (max. plate gauge 0,8 mm / Steel)
- The machine have certificate CE and 12 months warranty.
Shipping costs: its dependent on destinat...
13
Our segment press brake is not a typical press brake, this one is much stronger, sturdier and more powerful, prepared to be used multiple times. This model is characterized by removable upper and lower segments,
the bending beam is divided into segments. All segments are easy to assemble and disassemble.
Here we present our segment bending machine
SGR 1400/1,5/155°.
Technical specification:
- maximum working width: 1400 mm
- bending capacity: up to 1,5 mm (steel sheet)
- non-ferrous metals 30% m...
15
Bernardo swivel bending machine with segmented upper and lower beam of TBS 1270
Working length 1270
Max thickness of sheet metal (400 N / mm2) 2.0 mm
Maximum opening width 46 mm
Bending angle 0-135 °
Width 1600 mm
Depth * 1115 mm
Height 1150 mm
Weight 360 kg
* with Backgauge
Properties
Segmented top and bending flange for various bending possibilities
Clamping by means of foot pedal, hands remain free for optimum positioning of the plate
Universal bending machine for sheet metal work...
4
Country of origin: Germany
Working length: 1520 mm
sheet metal capacity: 2,5 mm
Adjustability of the bending beam: 25 mm
Max. opening width: 110 mm
Bending angle: 1-135
Dimensions, LxWxH, approx.: 2380 x 1340* x 1290 mm
Weight, approx.: 1220 kg
*Width without protective grille: 770 mm
Equipment:
- Very long service life due to robust welded steel construction
- Inclined upper beam with clearance at the back 50 mm
- Adjustable angle stop
- Lateral protection grids
- Lifting device
- Spreader rail...
15
Holzmann TBS 1320 sheet metal shears
Holzmann TBS 1320 sheet metal shears
Features:
- Limiter for precise material setting up to 700mm with a scale,
-possibility to set the front stop up to 880mm,
- rectangular stop for setting the material on both sides of the working table,
-automatic clamp for holding the sheet metal,
- easy and friendly work - foot operation.
Max. cutting length
1320 mm
Bwesr722ol
Max. sheet thickness
1 mm
Working height
800 mm
Weight
545 kg
6
Upper and lower blade removable in segments PNEUMATIC CILINDER !!! Max. zetcapaciteit over de hele werklength ----- 1.5 mm Max. werklength ----- 1500 mm Max. opening width ----- 43 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. zethode angle ----- 0 - 135 Weight ----- 450 KG Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm
Ddmyp07
11
maximum working length 2140 mm
sheet gauge up to 0,8 mm
approx. weight of hand machine 165 kg
shear cutting on the whole working length
U2k7dxfh
upper bar lifting in three positions
maximum clearance between bars 80 mm
