Used Geminis Ge 650 for sale (11,876)

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Psdoyz E T Sspfx Ag Togn Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: excellent (used), Year of construction: 2007, Manufacturer: GEMINIS Model: GHT5 G2 1000 x 3000 Cnc : SIEMENS 810 D Pgedpewgmz Uefx Ag Tsn Year : 2007 Distance between points : 3000 mm Max. Swing over bed : 1000 mm Max. Swing over saddle : 680 mm Main shaft hole diameter : 104 mm Turning speed : 1400 rpm Main motor : 37,5 kw Cross slide travel : 8m/min Tailstock quill diameter : 140 mm Quill traverse : 300 mm Bed width : 550 mm

Condition: excellent (used), mileage: 307,000 km, power: 405 kW (550.65 HP), first registration: 03/2018, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2018, operating hours: 11,851 h, Equipment: electric window regulation, = Additional options and equipment = - Aluminium fuel tank - Brake booster - Low noise - Refrigerator - Alloy wheels - Air suspension - Sun visor - Xenon lighting - Power take-off (PTO) = Further information = Axle configuration Front axle 1: Steered Front axle 2: Steered Weights Empty weight: 22,800 kg Payload: 13,200 kg Gross vehicle weight: 36,000 kg Functionality Body brand: Palfinger PK 65002 SH F + JIB PJ 125 E Podpfxsyvh R As Ag Tegn CE marking: yes Condition Technical condition: very good Visual condition: very poor Financial information Price: On request

Condition: used, Manufacturer: HERAEUS Psdpfoy Nlcvox Ag Togn Model: RL 250 Internal dimensions: Diameter: 315 mm Depth: 450 mm

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: • Mold weight: 1500 kg • Total weight: 3000 kg • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ Psdpfsyf Htyox Ag Togn • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm • Pump installed: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E • Travels: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Condition: used, Westtech Woodcracker G1650 Root Rake - New machine, in stock - Working width: 1650 mm - Own weight: approx. 1610 kg - Hydraulic flow rate: 50-90 l/min - Operating pressure: 200-250 bar - Carrier vehicle weight: approx. 20-25 t - 2x hydraulic gripping arms - Optional: fine rake attachment Numerous adapter plates available on request. Pgjdoyfrglopfx Ag Ton We are an official Westtech Woodcracker sales and service partner, Magni telescopic handler sales and service partner, JCB construction equipment dealer and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles in stock, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Rental possible = Further information = New: Yes Contact Tobias Ebert for further information.

Condition: used, Year of construction: 1990, turning diameter 870 mm turning length 3000 mm Pgedpfx Agoyutwde Ten control Siemens type 810 mm bed width 620 mm turning diameter over slide 560 mm 3 jaw chuck Forckrath 630 mm type 3KTN 630 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Load turning device, load turning beam, load turning device, load beam, adjustable beam, crane beam, beam for pillar slewing crane, indoor crane, workstation crane, chain hoist Psdpeg Dvyqjfx Ag Tegn -Crane cross member: adjustable, for the transport of different loads -Load capacity: 6500 kg -Hook spacing: min. 1460 mm / max. 2880 mm -Steel rope: O 22 mm, length 1580 mm -Dimensions: 3025/190 / H945 mm -Net weight: 230 kg

Condition: excellent (used), mileage: 465,000 km, power: 488 kW (663.49 HP), first registration: 01/2016, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,300 mm, Year of construction: 2016, operating hours: 5,065 h, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Brake booster - Low-noise - Speed limiter - Refrigerator - Air suspension - Radio/CD player - Reversing camera - Sun visor flap - Auxiliary heating (parking heater) Pgedpowdh Tgofx Ag Ton - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication - Towing hitch = Further Information = Axle Configuration Front axle 1: Steering Front axle 2: Suspension: Air suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Steering; Suspension: Air suspension Weights Unladen weight: 18,705 kg Payload: 17,295 kg Gross vehicle weight: 36,000 kg Functionality Crane: Palfinger PK 42002-SH E + JIB PJ 080 C, year of manufacture: 2015, mounted behind the cab Body manufacturer: Palfinger PK 42002-SH E + JIB PJ 080 C CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request

Condition: excellent (used), mileage: 200,000 km, first registration: 11/2020, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,300 mm, loading space width: 2,550 mm, Year of construction: 2019, operating hours: 6,523 h, Equipment: crane, electric window regulation, power mirror, trailer coupling, = Additional options and accessories = - Power brake booster - Low noise - Rotating beacon - Sun visor - Toolbox - Xenon lighting - Power take-off (PTO) - Towing hitch = Additional information = Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Suspension: Air suspension Pgodpfx Agexwlr Dj Tjn Weights Unladen weight: 23,686 kg Payload: 12,314 kg Gross vehicle weight: 36,000 kg Functional Body manufacturer: Palfinger PK 65002-SH F + JIB PJ 125 E CE marking: yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request

Condition: used, Year of construction: 2019, - Brand: Omme Lift - Type: 1650 EB - Year of construction: 2019 - Hours: 682 - Weight: 1975 kg. - Working height: 16.5 meters - Lateral reach: 10.5 meters - Dutch license plate - 25-WT-SB Psdjxrv E Ropfx Ag Togn - Drive: Battery + 220 volts - Movers / wheel drive - Safety inspection until Aerial work platform book available - CE document available - Machine is very neat - From 1st owner - Video on our website - Trade-in and transport possible * Brand: Omme Lift *Type: 1650 EB * Construction year: 2019 * Hours: 682 * Weight: 1975 kg. * Working height: 16.5 meters * Lateral reach: 10.5 meters * Drive: Battery + 220 volts

Condition: excellent (used), Year of construction: 2022, operating hours: 1,901 h, functionality: fully functional, High-precision Swiss-type CNC lathe in excellent condition. Ideal for small and medium-sized precision parts. Equipped with several options: • Direct-drive rotary guide bushing • High-pressure coolant system • Chip conveyor with cart • Work conveyor • Fanuc chip breaker function • Drill breakage sensor Pgsdpfetq Hufex Ag Tsn • STG-320 hydraulic magazine-type bar feeder (3m, Ø3–20 mm) Perfect for production of precision components for electronics, automotive, medical and general mechanical industries. For sale due to changed production needs. Year: 2022 Condition: Excellent / Low use

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black Pgsdewx Dctepfx Ag Tsn * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t Pedpfx Aow U H Sbjg Tsgn * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: PFEIFER technology, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, pipe diameter (max.): 160 mm, pipe length (max.): 7,500 mm, table length: 6,500 mm, type of input current: three-phase, type of cooling: water, compressed air connection: 13 bar, overall weight: 5,500 kg, total length: 14,800 mm, total width: 2,900 mm, total height: 2,525 mm, warranty duration: 24 months, year of last overhaul: 2026, working range: 7,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Centre 6500 x 15–160 mm with bevel cutting up to 50° skytube-pro-6500 X3 Profile and Tube Laser | Fiber Laser Metal Cutting for fast material change with up to 6kW — the smart and efficient tube laser processing solution for your production! Designed for round tubes, square tubes, rectangular tubes, open profiles, and special profiles. This laser cutting machine delivers maximum productivity, especially during production changeovers. The task: fiber laser up to 6kW for a wide range of metalworking applications. Unmatched Laser Cutting Performance High axis speeds and accelerations, paired with a stable mechanical structure, provide excellent cutting performance and accuracy. The tube and profile laser processing machine for production — space-saving and simply smart! Innovative solutions 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm 3D cutting with efficient fiber laser technology The semi-automatic 6-fold profile tube loading chain system enables fast job changeovers. With the optional bundle loader, you can work completely independently. Bevel Cutting A function that changes everything. With our machine’s ability to swivel its cutting head up to 50° on an additional fifth axis, we address one of the biggest challenges in modern profile machining. If the laser beam always strikes the tube perpendicular to the surface, the cut edge will be elliptical. Swiveling the tube laser’s cutting head, combined with the feed axis, enables true bevel cutting. With the skyTUBE Laser, you are always on the safe side! The skyTUBE Pro is a class 1 laser system — there is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, safety and compliance with the highest standards and regulations are paramount. Technical Features: · Closed industrial housing, class 1 or optionally class 4 laser · Working area, tube cutting system/clamping system: uniform tubes 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on tube X 6500 Y ±100 Z 150 A ±360° U ±50° · Automatic material feeding: up to 6 x 160 mm profiles, 3500–7000 mm lengths · Automatic material unloading system for profile sections, design matched to profile lengths · Z drive system: ball screw axis system with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: up to 50 m/min depending on material and laser combination (1.4G) · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm Pjdpfx Aeyh A Nyog Tjgn · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system, depending on required profile cut length. With standard version and 4.5 m automatic unloading, the total length is approx. 14,800 mm.

Condition: used, Brand: GEMINIS Model: CNC 4 PLUS 620 x 2000 Cnc : FAGOR Distance between points : 2000 mm Height of centers : 315 mm Max. turning diameter : 620 mm Swing over saddle diameter : 370 mm Bar passage : 80 mm Precision swivelling turret: 1st speed range: 0 to 355 rpm 2nd speed range :0 to 1800rpm Tailstock : Morse 6 Main motor : 15 kw Max. Piece weight : 2.560 kg Tailstock quill diameter : 140 mm Machine size (L x Wx H): 4300x 1900 x 1800 mm Psdpfx Aewznp Nog Togn

Condition: like new (used), functionality: fully functional, machine/vehicle number: A06B-0744-B100, rotational speed (min.): 1,500 rpm, rotational speed (max.): 6,000 rpm, Spindle motor Brand: Fanuc Model: 6I Ref.: A06B-0744-B100 Characteristics: Power: 7.5 kW Frequency: 200 Hz Intensity: 31 AMP Potential energy: 200 V Speed range: 1500/6000 RPM Pedpfx Agerpiydj Tsgn Comes from machine: Lagun MC 9040 machining center

Condition: like new (used), functionality: fully functional, machine/vehicle number: A06B-0126-B075, Servo motor Brand: GE Fanuc Model: C6/2000 Motor specification: A06B-0126-B075 Features: Power: 0.6 kW Frequency: 133 Hz Current: 3.6 AMP Pgodpfx Agjr Nbikj Tjn Potential energy: 210 V Revolutions: 2000 RPM

Condition: like new (used), functionality: fully functional, machine/vehicle number: A06B-0854-B190, Servo motor Brand: GE Fanuc Model: 6 Motor specification: A06B-0854-B190 Features: Power: 7.5 kW Frequency: 50/60 Hz Pgjdper Nbkpefx Ag Ton Current: 44 A Potential energy: 135-222V-AC Revolutions: 1500-8000 RPM

Condition: new, 🧰 Product Features • Condition: new • Color: gray • Volume: 650 l • Load capacity: 4000 kg (at 5°C room temperature) • Weight: 43 kg • Length: 120 cm • Width: 100 cm • Height: 78 cm • Stackable: Yes • Dimensionally stable: Yes Pedpfxohvrk Tj Ag Tjgn • Special features: suitable for racking, liquid-tight, drain valve possible 💰 Price €155.00 net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment We continuously stock over 5,000 linear meters of pallet racking from numerous manufacturers. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our general terms and conditions, all prices exclude VAT, ex warehouse.)

Condition: new, Year of construction: 2026, functionality: fully functional, working range: 6,500 mm, type of input current: three-phase, total width: 1,629 mm, total height: 2,525 mm, total length: 10,500 mm, table length: 6,500 mm, overall weight: 5,500 kg, power: 15 kW (20.39 HP), laser power: 6,000 W, warranty duration: 24 months, Equipment: cooling unit, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile & Tube Laser Center 6500 x 15 – 160 mm Format skytube-pro-6500×3 Profile and Tube Laser Fiber Laser Metal Cutting – fast material change with up to 6kW, delivering effective performance for your production, is the smart and efficient tube laser processing solution. Capable of laser cutting round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine ensures maximum productivity during production changeovers. Task: Fiber laser up to 6kW for a wide range of metalworking applications! Unrivaled Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure outstanding cutting performance and precision. The tube and profile laser processing machine for production offers a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile-tube loading chain system allows fast job changes. With the optional bundle loader, you work independently. Bevel Cutting A revolutionary feature. With the ability of our machines to swivel their cutting head up to 50° on an additional fifth axis, we provide the solution to one of the biggest challenges in modern profile processing. If the laser beam always strikes the tube at a right angle, you end up with an elliptical cut edge. With the capability to swivel the tube laser cutting head, together with the feed axis, completely angled cuts are now possible. Of course, when working with the skyTUBE Laser, safety comes first! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and directives. Technical Specifications: · Closed industrial housing, Class 1 laser (optionally Class 4) · Working area, tube cutting system/chuck: Round tubes 15–160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on the tube: X 6500 mm, Y ±100 mm, Z 150 mm, A ±360°, U ±50° · Automatic material feed: up to 6 x 160 mm profiles, lengths 3500–7000 mm · Automated material unloading system for profile sections, construction adjusted to profile length Podjrh Iw Tepfx Ag Tjgn · Z drive: ball screw axis system / with PTI SVZ system · X/Y drive: linear axis system / with PTI AC-SERVO system · Productive cutting speed: depending on material and laser combination, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Max. footprint dimensions (LxWxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system according to profile section length

Condition: good (used), Year of construction: 2006, Brand: GEMINIS Model: GHT4 G2 700x 2000 Cnc: FANUC 21 TB Distance between centers: 2000 mm Ø Swing over bed : 720 mm Ø Over carriage: 470 mm Spindle diameter : 104 mm Maximum piece weight between points : 2.560 kg Spindle nose: DIN 55027-11 Spindle speed: 0-1600 m/min Pgodpfxjxdub Ie Ag Ton Total power : 28 kw

Condition: used, machine/vehicle number: FN470850, Year of construction: 2014, operating hours: 3,366 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 2,300 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, fork width: 125 mm, fork thickness: 50 mm, overall weight: 6,175 kg, total height: 2,900 mm, total length: 3,750 mm, total width: 1,200 mm, Equipment: cabin, lighting, pallet forks, sideshift, Jungheinrich 4-wheel electric forklift Operating hours: 3366 Load centre: 500 mm ISO class: ISO Class 3 Mast type: Triplex Lift height: 6500 mm Drive: Three-phase Pgsdowzwhbspfx Ag Ten Battery voltage: 80 V Battery capacity: 775 Ah Battery year of manufacture: 2014 Battery in good condition Free lift Side shift Front working lights Rear working lights

Condition: excellent (used), Rated HP 400 RPM 1475 Volts 380 Phase 3 Freq 50 Code A Amps 542 Frame 8188DZ Type K Pjdpfxsn Uwpfs Ag Tsgn HP 460 Time Rating: Cont Rise: 90 Celsius by RES Drive end bearing AFBMA 80BC03 Front end bearing AFBMA 80BC03 Lubrication Grease GE Spec D6A2C5 Good working condition. Please check out our other listings as well.

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Product features Superior performance: New TE module with special technique to ensure long service life. Precise temperature control technology ensures temperature flfluctuation of each well lower than 0.1℃. Unique bottom detection, compatible to reaction volume down to 5μl. Combination of precise light path system and super highly-sensitive PMT system ensures super high sensitivity and precision of flfluorescence detection. LED excitation light source of super long service life requires no maintenance. Brand-new automatic hot lid technology, free from manual operation, automatic open and close, effffectively prevent reagent evaporation. 6 channels flfluorescence detection, no crosstalk between difffferent channels. Equipped with whole block scanning and formulated line scanning mode, 96-well double-color scanning takes only 5.5s. Pjdpfjuvdnnjx Ag Tsgn Powerful software system: Operation interface in English language, simple to use. Multiple templates, easy to fifind experiments saved, and fast to set up new experiment. (HRM), SNP analysis, relative quantitative and isothermal amplifification. Humanized software with user friendly interface. Comprehensive analysis and report function, flflexibly print single and multiple sample reports. Custom gain and auto gain fully satisfy various experiment demand of difffferent users.Various analysis modes: qualitative/absolute quantitative, standard curve, melting curve, high-resolution melting curve. Powerful technical team： BIOER owns over fififteen years’ experience in professional PCR development and technical accumulation. BIOER provides comprehensive pre-sales technical support and after-sales application engineers. It owns professional reagent development team which can provide a full range of reagents independently developed to deal with compatibility of the upstream and downstream reagents, making scientifific research easier. Brand new never used. Please check our other listings as well.