Used Gestra Check Valve Dn20 for sale (10,254)

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 2,432 h, load capacity: 7,000 kg, lifting height: 4,705 mm, free lift: 1,555 mm, fuel type: electric, mast type: triplex, construction height: 2,710 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 1240Ah Battery type: PzS Battery year of manufacture: 2024 Description: Overhauled, serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, Fpjdjzwyf Sopfx Aayel 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, air conditioning, rotating beacon, LED, - Air conditioning

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Fpsdpszhnlzjfx Aaysl Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Fpsdpfjtuggcex Aayel Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: used, Year of construction: 2020, We are selling a used Zaugg Vario4-360-4-45 snowplow, manufactured in 2020. Zaugg snowplow, type VARIO4, plow body upper part with a plastic plate, adjustable blade shape, mechanically or hydraulically, with four to six Zaugg suspension elements and PUR side protection. Includes the following components: - Plow body type Vario4-360-4 (Art. No. SP 4509-0-360) - Set of wear rails Küper Kombi S36 360-4 (Art. No. SP 2156-0-108) - Pair of curb deflectors, rubber, 100mm (Art. No. SP 6355-0) - Hydraulic swivel device Vario4-45° with HY 3587-0 telescope cylinder TZ 45/60-1000 (Art. No. SP 6332-0-102) - Parallelogram G33/Vario4-45° with lifting cylinder (Art. No. SP 4568-0) - Support 880 SP 3113-0 (Art. No. SP 6307-0) - Mounting plate G33-45° EN15432 F1 (Art. No. SP 6175-0-107) - Hydraulic blade adjustment for VARIO4, kit consisting of: Fpsdpszmb Tiefx Aayjl - 2 adjustment cylinders with unlockable check valves - Hose lines up to the connecting piece (Art. No. HY 1377-0-111) - Overpressure valve block, size 3 with hose lines (Art. No. SP 2114-0) - Hose set for lifting, double-acting (Art. No. HY 229-0-135) - Hose set for swiveling (Art. No. HY 230-0-142) - Hose set for adjustment (Art. No. HY 1401-0-110) - Snow dust protection VARIO4, 300 (Art. No. SP 6091-0) - Flashing position light, LED 9-36V, mounted on the plow body. Location: 99428 Weimar

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve • Rotating viewing window / work area door • Flushing gun with pump • Double gripper • Wheel magazine • NC rotary table Ø 630 mm • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction Fedpfx Aasyi Ekfeyjpl • Tool breakage check mechanical design Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 • Mpc machine protection control (machine protection through rapid shutdown) • Laminated glass safety pane for right-hand cabin door window Extra Information Documentation and Electrical circuit diagram (German) available

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Fodpfszhn Rqsx Aayjpl Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, functionality: fully functional, Amersham Biosciences Purifier FPLC System with software & PC. The Amersham Biosciences Purifier represents advanced Fast Protein Liquid Chromatography (FPLC) system for analytical and preparative, laboratory scale, chromatography. The system offers a broad, accurate, flow-rate range, coupled with advanced gradient control and monitoring systems under the control of UNICORN Software ensuring precise, reliable and reproducible operation. Set includes: Fpedpfet Uwh Sex Aayjl -P-900 series pump -UV-900 multi-wavelength UV monitor -pH/C-900 monitor -Box-900 -Frac-950 fraction collector -INV-907 Motor Valve -IV-908 Motor Valve -M-925 Mixer Valve -Software & PC -Trays, connectors, pipes, cables Good working condition. Please check out our other listings as well.

Condition: new, For sale: EMG-DREHMO DR 39 B-40 electric valve actuator. The device comes from warehouse stock – condition: new, unused. Actuator designed for automatic valve control in industrial installations (water, gas, process technology, power engineering). Technical data Fodpfx Aajyutpgoyopl • Manufacturer: EMG-DREHMO • Model: DR 39 B-40 • Year of manufacture: 2005 • Torque: 40 Nm • Power supply: 380–420 V / 50 Hz • Motor power: 0.40 kW • Speed: approx. 30–40 rpm • Protection class: IP67 Condition Device is brand new – warehouse condition. Visible transport marks: slightly bent handwheel, small crack in housing by the gearbox (visible in photos). Not tested under voltage – sold as warehouse device / to be checked before installation. Scope of delivery • EMG-DREHMO valve actuator • Handwheel for manual operation Visual condition as per photos.

Condition: used, maximum load weight: 28,880 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2003, loading space volume: 49 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2003, Equipment: ABS, 3-axle Schrader Tank Trailer 49m³ VIN: 1S82316 Chassis / Accessories: * 3 x BPW Eco Plus axles with disc brakes * Air suspension * Lift/lower function * Drop-down supports * Tires: 385/65 R.22.5 * Alcoa aluminum rims * Remaining tread depth: 1st axle: 20/30% // 2nd axle: 30/50% // 3rd axle: 30% * 1x storage box * 1x spare wheel holder Superstructure: * Schrader chemical tank trailer * Volume: 49 m³ * ADR FL/AT specification * 5 compartments * 1st: 7,500 l 2nd: 7,500 l 3rd: 20,000 l 4th: 7,000 l 5th: 7,000 l * 6 dome covers (20,000-liter compartment with two dome covers) * 5 outlet valves * Overfill prevention F.A. Sening Weights: * Gross weight: 38,000 kg * Payload: 28,880 kg * Unladen weight: 9,120 kg Fedpjxzmbbefx Aayepl Other features: * German vehicle * ADR FL/AT * SP valid until 07/2026 * 1 previous owner New main inspections / safety checks or weight upratings/deratings are possible upon request. We are happy to assist you with obtaining export/temporary license plates, and we can also arrange delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for typographical or spelling errors. Subject to changes, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner to customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On 11,000 m² you will find a wide range of vehicles. Our company philosophy is characterized by fairness and integrity. Customer satisfaction is especially important to us, which is why we offer an outstanding all-round service package and provide a competent contact person who will support you in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to help you load your purchased vehicles. Organization of special transports We are happy to assist you in organizing special transports. Temporary/export license plates We are happy to help you obtain export or temporary license plates. Handling of customs formalities We are happy to assist you with customs matters.

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 General description Modern injection molding machine equipped with a fully hydraulic clamping unit. Fsdjzrgfhjpfx Aayepl The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Version with wear-resistant (abrasion-resistant) protection Check valve Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Main motor power: 160 kW Installed heater power: 93 kW Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m

Condition: excellent (used), Year of construction: 2001, Complete skid mounted unit with: 1) Infeed trolley/Wagon with 2 stainless steel augers pushing the product into a Positive Rotary piston Pump for ingredients like: Grinded cheese, butter, vegetable fatt, salts etc a cold premixed blend. 2) Steam injection system to heat to 80°C with pump on outlet. 3) 2de heating: 95/140°C This high Ultra high heating module can by by-passed by switching 2 swingbend panels 4) Holding tube 5) Flow diversion valve (no product can pass if temperature not achieved) 6) Flashcreaming module, Vessel of 44ltr combined cooler for rapid cooling and creaming in one. 7) Viscosity measuring system with pump and sensor to check the viscosity. 8) Centrifugal CIP pump 9) Scid mounted with all needed inter connecting piping, sensors and valves. 10) Controls Siemens S5 and operator panel. The UHT System is a compact, skid mounted modular line-process system designed especially for lab or small scale industrial production Fedozdrufjpfx Aayopl

Condition: used, Year of construction: 2019, Overview This lot comprises two VIG pressure tanks of 5,000 litres each, built in 2019 by VIG Vertrieb Industrieller Güter (Kreuztal, Germany). The vessels are CE-marked pressure vessels according to EC pressure equipment directive 2014/68/EU and were last used as activated carbon filters in a brewery’s water treatment. Fodpfxszpaiuo Aayjpl Each tank is fitted with a filter star; the filter candles show light damage. The tanks are interconnected with DN 65 piping and come with butterfly valves for cleaning, draining and shut-off as well as vacuum/check valves. With their young year of construction and availability as a pair, the vessels suit filtration and pressure-holding duties in breweries and beverage plants alike. Technical data - Manufacturer: VIG Vertrieb Industrieller Güter (Kreuztal, Germany) - Year of manufacture: 2019 - Number of tanks: 2 - Volume: 5,000 l per tank - Max. operating pressure (PS): 6 bar - Test pressure (PT): 7.8 bar - Operating temperature (TS): 0 - 50 °C - Pressure vessel per EC directive 2014/68/EU, CE-marked - Front manhole on each tank Equipment - Filter star with filter candles in each tank (candles with light damage) - Interconnecting piping DN 65 - 3x M&S butterfly valves (cleaning, draining, shut-off) - 2x vacuum / check valves Condition Used - good overall condition in line with the young year of construction. The filter candles of the filter stars show light damage. The tanks are installed indoors. Availability Immediately. Location: Germany.

Year of construction: 2015, condition: excellent (used), The machine was checked by the manufacturer, of course I can show you a WhatsApp video about it . The system has run very little for the age see corresponding picture . Fsdonl Ervspfx Aayopl Invoice of the repair is available !!! Water-cooled system - Automatic make-up - Return flow protection - Frequency-controlled pump can operate up to 6 bar - Cooling water regulating valve , NEW - New refrigerant R 134a - Alarm light for faults - Cartridge filter Complete operation and management from the PV possible, this machine is worth your money due to the many options! Of course you will also receive the technical specification on request!

Condition: excellent (used), Year of construction: 2009, The new cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with its clear design. Key features of the K-MT series adsorption dryers, such as: • one-piece adsorber profiles • separately controlled main and discharge valves in a leak-free design • compact check valve combination, guarantee continuous operational reliability and high availability. All K-MT series adsorption dryers feature: • self-cleaning screen trays on the wet side • high-quality desiccants During adsorption, the desiccant stores the moisture contained in the compressed air. Parker Zander uses exclusively highly active, high-capacity molecular sieve desiccant. This desiccant guarantees a long service life at high inlet temperatures or low pressure dew points. Regeneration takes place in the opposite direction to adsorption. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the desiccant bed to be regenerated. The moisture stored during adsorption is carried away with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerated adsorption dryers is based on: Operating pressure 7 bar Inlet temperature 35°C Pressure dew point -40°C for a cycle with: - 5 minutes of adsorption - 4 minutes of desorption - 1 minute of pressure build-up The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load cycles per hour. The standard 6-minute cycle, with 3 minutes of adsorption, requires 20 load cycles per hour and therefore inevitably 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs with reduced wear. Multitronic, the control system with groundbreaking new functions and a new design, is perfectly tailored to the K-MT series of cold-regenerating adsorption dryers. It allows for highly effective adaptation of the adsorption dryer to even the most diverse operating conditions. From the continuously visible status to the pressure dew point control of the adsorption dryer, the benefits for the operator are readily apparent with Multitronic. Housed in a clear and easily accessible control cabinet, the Multitronic system offers: • user-friendly microprocessor control for all Parker Zander Heatless dryer systems • flexible cycle time settings. • Front-panel LEDs for individual functions such as: - Operation - Adsorption - Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as synchronization with the compressor Optional features: • Direct pressure dew point measurement including digital display • A potential-free output for the pressure dew point limit • The ability to set the desired dew point in the range of -25°C to -40°C Technical specifications: K-MT 8 Fpedpfoypb Dujx Aayel Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection watts: 50 Year of manufacture: 2009 Manufacturer's price: €8,880 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2009, clamping force: 3,000 kN, screw diameter: 65 mm, clearance between the columns: 710 mm, injection pressure: 2,070 bar, injection weight: 981 g, mold height (min.): 225 mm, Clamping Unit • Clamping force: 3000 kN (300 t) • Distance between columns: 710 x 710 mm – special design, increased distance compared to the standard version • Mold height: min. 225 mm / max. 1125 mm • Opening stroke: 900 mm • Maximum distance between mounting plates: 1125 mm • Mounting plate size: 1030 x 1020 mm (920 mm) • Special hole pattern in the clamping plate and nozzle plate – made to order • Manual device for removing the upper column, with a removable cover in the front guard and a wrench for the column nut Injection Unit • Injection unit 2250 • Screw diameter: 65 mm, L/D ratio 22.0 • Shot volume: 1078 cm3 • Maximum injection weight (PS): 981 g • Specific injection pressure: 2070 bar • Equipment package: wear and corrosion-resistant plasticizing unit, adapted for processing PP and PPSU, diameter 65 mm • Hart-PVC package: without internal screw cooling, with external cylinder cooling instead of standard design • High-temperature heating bands for a working temperature of 450 °C • 8 standard open nozzles, plus: 4 for the PVC cylinder and 4 for the PP cylinder, through holes 4, 8, 10, and 12 mm • Wrench for screw tip for a 65 mm diameter UNILOG B6S Control System - Upgrade package • Controller with increased computing power • APS and cycle time analysis • Four freely configurable network connections • Userpage and notepad • Real-value graphics with 16 curves • Event log depth: 10,000 events • Quality table memory depth: 10,000 events • Four envelope curves, foil function keys • SPC evaluation and trend charts • Injection, holding, and back pressure controlled by a servo valve Hydraulics and Hydraulic Cores • Core movement and parallel ejection are performed by an additional DFEE pump, size 71, flow rate 95 l/min • 4 x hydraulic core for the clamping plate NW 10 (on/off valve), interfaces according to EUROMAP 13, with active ejector plate protection • Cores mounted on the upper side of the clamping plates, each with connections for two consumers • 2 x core junction box in a special design: 25 3-pole Amphenol plugs, mounted on the clamping plate on the operator side and the rear side, connected in series • 4 x core pressure relief upon emergency shutdown, engine stop, and after pressing the button in setting mode – relief occurs simultaneously for cores on the clamping side and the nozzle side • 4 x twin check valve for NW 10 core • 2 x pneumatic valve for controlling one closing nozzle in the mold or several in parallel (1000 l/min), mounted in the center console at the rear of the machine Mold Heating, Electrical System, and Connections • 12 x temperature control circuit for hot runner or mold heating, power 2.3 kW, 10 A, interface according to HASCO standard (1 x HASCO 24-pole for max. 6 zones) • Mounting location for heating circuits: center console at the rear, near the control cabinet • 2 x Schuko 16 A socket: under the control system and on the clamping side from the rear, under a cover • 2 x CEE 16 A socket: on the injection side from the front and on the clamping side • Dual power supply: 1. power supply 3P+N, 400 V, rated current 140 A, preliminary protection gL-gG 160 A • 2. power supply 3P, 400 V, rated current 98 A, preliminary protection gL-gG 100 A Fjdpjzxfg Rofx Aayspl

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 3,801 h, load capacity: 1,400 kg, lifting height: 8,000 mm, free lift: 2,640 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,150 mm, drive type: Elektro, Reach truck Load Centre: 600 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Fpodpfx Aaowvnwisysl Condition: Refurbished without warranty Technical Condition: Very good Front Tyres Type: Polyurethane Front Tyres Condition: 80 - 100% Rear Tyres Type: Polyurethane Rear Tyres Condition: 80 - 100% Battery Voltage: 48V Battery Ah: 775Ah Battery Manufacturer: Suitable Battery Type: PzS Battery Year: 2017 Description: Overhauled, serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Sideshift, - Mast traverse 3rd valve, 4th valve,

Condition: used, Year of construction: 2006, Zum Verkauf steht ein Posten pneumatischer Ventile und Antriebe des Herstellers Festo. Fpsdpfxjyxqluo Aayol Gesamtmenge: 42 Stück – 28 Einheiten als komplette Ventile mit Edelstahl-Kugelhahn – 14 Einheiten: pneumatische Antriebe / Komponenten Die Komponenten stammen aus industrieller Anwendung (Prozessanlage) und wurden fachgerecht demontiert. Ein Teil der Einheiten wurde überprüft, mehrere Komponenten zeigen funktionsfähigen Zustand. Die vollständige Funktionsprüfung aller Einheiten wurde nicht durchgeführt. Geeignet für: – Industrieautomation – Lebensmittel- und Getränkeindustrie – Chemische Industrie – Wasser- und Prozesstechnik – Wartung und Ersatzteile Neupreis vergleichbarer Festo Einheiten: ca. 150–300 € pro Stück. Sehr interessanter Posten für Händler oder industrielle Instandhaltung. Verkauf vorzugsweise komplett. Preis: 2.900 € VB Standort: Slowakei (EU) Versand europaweit möglich For sale: lot of pneumatic valves and actuators by Festo Total quantity: 42 units – 28 complete units with stainless steel ball valves – 14 units: pneumatic actuators / spare components The components originate from industrial process application and were professionally dismantled. Some units have been checked, several appear to be in working condition. Full functional testing of all units has not been performed. Suitable for: – industrial automation – food & beverage processing – chemical industry – water treatment and process systems – maintenance and spare parts supply Estimated new price of comparable Festo units: approx. 150–300 € per unit. Very attractive lot for traders or industrial maintenance. Preferably sold as one lot. Price: 2,900 € negotiable Location: Slovakia (EU) Worldwide shipping possible

Year of construction: 2008, condition: ready for operation (used), Offered for sale is a Kern Kraft chamber filter press. Max. filtration capacity: 2000l/24h, number of filter plates: 10 standard, expandable to 20, filter area range: 3.9m²-8m², chamber volume: approx. 40l. Equipped with plates and cloths, pressure switch, stainless steel filter cake tray and stainless steel piping, expansion tank, check valve and automatic shutdown, pump and candle filter housing with filter cartridge and control cabinet. Dimensions X/Y/Z: 2500mm/1000mm/1800mm, weight: approx. 630kg. An on-site inspection is possible. Fpjdpfx Aajztzqnoysl

Condition: excellent (used), Year of construction: 2018, clamping force: 500 kN, Equipment: documentation/manual, Clamping force - 500/650 kN Injection cylinder diameter - 27 mm Theor. Cylinder volume - 50 cm3 Centering circle diameter - 125 mm Min. mold height - 210 mm Max. mold height - 460 mm Max. opening of the cap - 600 mm Distance between columns (vertical) - 320 mm Distance between columns (horizontal) - 360 mm External dimensions of the clamping plate (w x h) - 500 x 470 mm Number of hydraulic cores - 0 Number of pneumatic circuits - 2 Max. ejector stroke - 70 mm Power consumption - 30 kW Equipment / Options: 1. Power transformer AC400V → AC200V 2. Air ejector – 3 circuits 3. Reject part detection 4. Euromap E67 5. USB interface 6. Parallel mould movement / dosing 7. Parallel mould movement / ejector 8. Pre-injection function 9. Precision dosing function 10. Screw check valve backflow measurement 11. Shut-off nozzle – software 12. Hot runner valve gates – 8 circuits (software) 13. Communication with temperature controllers (software) 14. Intelligent mould protection 15. Intelligent ejector protection 16. Tool kit 17. Fuse kit Fpsdpfx Aajzn Uqwsyjl 18. 21 freely programmable inputs/outputs 19. 2× analogue inputs 0–10 V DC 20. Alarm beacon with audible signal 21. Czech operating manual 22. 1-day operator training at customer site 23. Commissioning 24. Automatic clamping force correction during operation

Condition: used, Year of construction: 2011, operating hours: 4,745 h, load capacity: 3,500 kg, lifting height: 4,450 mm, fuel type: gas, construction height: 2,960 mm, gearing type: automatic, Equipment: air conditioning, cabin, lighting, pallet forks, sideshift, trailer coupling, Linde H 35 T - Series 393 - Full Service Forklift - Ex Rental Unit Made in Germany. Good condition, technically sound, and ready for use. The operating hours have been recorded and checked. The forklift is delivered with a gas cylinder. Fpodpfewlg Dgex Aaysl A new accident prevention inspection is available upon request. 4,745 operating hours Full cab - raised - Comfortable driver's seat Exterior mirrors Heating Air conditioning 2-pedal operation 4 front work lights 2 rear work lights Standard mast Cross lever joystick operation Lift height: 4,450 mm Overall height: 2,960 mm Free lift: 150 mm Integrated sideshift Forks 1,200 x 125 x 45 mm - N E W - Forks - other lengths possible from 1,200 mm - 3rd + 4th valve / dual auxiliary hydraulics SE tires Front tires 80% Rear tires 100% - N E W - Technical specifications - Errors excepted. Sale without warranty.

Condition: good (used), Erlab Captair Filtair 936 Fume Hood Erlab's exhaustless, filtering chemical fume hoods offer the world's most powerful filtration, guaranteeing safety and performance. A system with countless advantages, providing seamless protection throughout the laboratory and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical fume hood performance criteria and ensures your safety at all times. Advantages Complete user protection Filtration safety: All captair filtair fume hood models comply with AFNOR NFX 15-21 1 Class II. High retention capacity for chemical vapors in the work area, guaranteed by controlled air velocity at the front and compliance with pollutant retention standards (XPX 15203, BS 7258, DIN 12927). A sampling valve for the exhaust air allows the user to check filter saturation at any time using colorimetric test tubes (not included). The acrylic front and door protect against potential chemical splashes (fire classification, NF P92.507 standard). Ergonomics and comfort Angled front panel provides better visibility of the work area. Thoughtfully designed hand openings give the user ample freedom of movement within the work area. Cable glands for routing electrical or power cables into the work area. Optimized working position. Very low noise level (49 dBA). Transparent walls for a clear view of work processes within the work area. Easy installation / Energy savings. No exhaust duct required; a standard electrical outlet is sufficient. Direct installation in your laboratory or on an optional mobicap rolling table. Energy savings through the recycling of purified air from the unit without the consumption of heated or cooled air. Erlab/Captair fume hood Filtair 936 Fjdoyk Dq Hepfx Aayepl Connection values: 230 V, 50 Hz, 94 W Safety class 2 Air flow rate: 200 m³/h Front air inlet velocity: 0.51 m/s Filter type: S Filter 960-961 Safety class 3 Pollutant retention class: B 2 fans Analog flow meter Noise level: approx. 51 dB(A) External dimensions: 110 x 84 x 74 cm Internal dimensions: 87 x 82 x 73 cm Working chamber volume: 0.432 m³ Two access openings in the front panel Available Filters: MF and VF CE marked. Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX injection molding machine Year of manufacture: 2008 Robot: Wittmann Control: MC5 Equipment Fully hydraulic clamping unit MC5 control with color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials Screw Ø 120 mm with abrasion protection Check valve Open nozzle Clamping unit Clamping force: 11,000 kN Opening force: 770 kN Platen dimensions: 2210 × 1910 mm Distance between columns: 1550 × 1250 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum mold height: 1200 mm Maximum opening: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Injection weight (PS): 6175 g Screw speed: 103 / 145 rpm Injection rate: 1118 cm³/s Injection rate with accumulator: 1696 cm³/s Plasticizing unit Designed for processing thermoplastic materials Version with abrasion protection Check valve Open nozzle Electro-hydraulic system Pump motor power: 132 kW Heater power: 82 kW Number of heating zones: 7 Number of dry cycles (Euromap): 802 cycles/h Oil tank capacity: 2440 l Dimensions and weight Dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Weight: 73 t Fedszkanyjpfx Aayspl

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX Injection Molding Machine Year of manufacture: 2010 Control system: MC5 Type: Hydraulic injection molding machine Equipment Fully hydraulic clamping unit MC5 control system with a color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials 70 mm screw with abrasion protection Check valve Open nozzle Clamping Unit Clamping force: 3000 kN Platen dimensions: 995 × 1050 mm Tie bar spacing: 630 × 630 mm Opening stroke: 820 mm Maximum opening: 1150 mm Minimum mold height: 330 mm Ejector stroke: 200 mm Ejector force: 57.7 / 28.3 kN Injection Unit Fodezkafljpfx Aayepl Screw diameter: 70 mm Injection pressure: 1877 bar Injection volume: 1078 cm³ Injection weight (PS): 981 g Injection rate: 385 cm³/s Injection rate with accumulator: 1155 cm³/s Screw speed: 220 / 310 rpm Plasticizing Unit For thermoplastic materials Abrasion protection Check valve Open nozzle Electro-hydraulic System Pump motor power: 55 kW Heater power: 29.2 kW Number of heating zones: 6 Number of dry cycles: 1350 cycles/h Oil tank capacity: 720 l Dimensions and Weight Dimensions: 6500 × 2200 × 2300 mm Weight: 14.5 t

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 9,580 h, load capacity: 8,000 kg, lifting height: 4,705 mm, free lift: 1,555 mm, fuel type: diesel, mast type: triplex, construction height: 2,710 mm, fork carriage width: 1,800 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 600 ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: Reconditioned, no guarantee Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: New Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV) // Completely repaired, serviced, and checked - New fork positioner available at an extra cost 3rd valve, 4th valve, rear work light, front work light, heater, full cabin - Rear-view camera Fodpfx Aajzxi Hzsyjpl

Condition: used, Used stainless steel container / transport container Containers are cleaned and checked for leaks! Last intended use: Chemicals Article number: 10424 7 pieces available Volume: 1000 L Type: Standing in a galvanized frame Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Bottom: Arched Top: Arched Operating pressure according to nameplate: +0.33 bar Container dimensions: Manhole: 455mm Fjdpfev Duppex Aayspl Cylindrical height: 1000mm / 930mm Total width: 1200mm Total length: 1100mm Total height: 1700mm Distance from drain to floor: 240mm Materials: Inside: 1.4301 / AISI 304 Frame: Galvanized steel Facilities: Nameplate: Yes Outlet diameter: 540mm / 730mm Outlet Type: Ball valve / disc valve