Used Hand-Operated Fly Press for sale (43,085)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame Nsdpfxoy R Nnfo Agyslc • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: excellent (used), Year of construction: 2014, power: 5.5 kW (7.48 HP), pressing force: 40 t, table width: 100 mm, table length: 2,100 mm, throat depth: 300 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Nsdozgfv Uepfx Agyelc Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Width: 2000mm Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Bahco, hydraulic pump hand pump, two-stage -Type: P2508 -Pressure range: up to 80 Mpa / 800 bar -Oil volume: 2.5 L -Quantity: 6x hand pump available Nlsdpfehmgz Tsx Agyoc -Price per piece -Dimension: 600/145 / H180 mm -Weight: 14 kg/pc.

Condition: good (used), Year of construction: 2010, Used Trumpf PB 30160 CNC press brake Nledpfxjzfpkyj Agyoc Type: PB 30160 Capacity: 3200 x 160 tons Delem DA56 CNC control Y1, Y2, X, and R axes CNC controlled CNC hydraulic crowning Upper beam servo hydraulics Panasonic servo motors on the rear stroke 1 set of tools included

Condition: excellent (used), Year of construction: 2017, Very well-maintained E Brake from SafanDarley. Nsdezfphlepfx Agyolc Type: E Brake B 100 3100 Capacity: 3100 x 100 tons Y1, Y2, X, X1, R, Z1, and Z2 CNC Hydraulic Wila NS top clamp Includes a set of tools.

Condition: good (used), Year of construction: 2017, load capacity: 1,000 kg, lifting height: 600 mm, empty load weight: 160 kg, Manual scissor pallet truck Brand: JUNGHEINRICH Year of manufacture: 2017 Capacity: 1,000 kg Nljdpfxjy R Acce Agyoc Lifting height up to 800 mm Manual drive and lifting Fork dimensions: 560 x 1,150 mm

Condition: good (used), Year of construction: 2012, Used 3-meter CNC press brake from Amada Type: HD 1003 NT Capacity: 3100 x 100 tons Year of manufacture: 2012 Nlodpjzd S A Nsfx Agyjc Servo-hydraulically controlled AMNC control system X1, X2, R, Z1, and Z2 CNC controlled Akas Fiesller laser safety system

Condition: good (used), Year of construction: 2011, Used Trumpf 5130, 3-meter CNC press brake Type: 5130 Capacity: 3100 x 130 tons Year of manufacture: 2011 Wila hydraulic upper and lower clamping system Bending aid Nedpfx Agozd S Apeyelc X, R, Z1 and Z2 CNC-controlled back gauge

Condition: good (used), mileage: 406,235 km, power: 207 kW (281.44 HP), first registration: 02/2020, fuel type: diesel, tire size: 245/70R19,5, axle configuration: 4x2, wheelbase: 5,180 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,550 mm, total width: 2,550 mm, total height: 3,310 mm, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Halogen lamp - Hydraulic system - Short cab - Manual - Auxiliary drive - Pump - Radio/cassette - Reversing camera - Lane keeping assist - Fabric - Winch = Notes = Number of axles: 2, Configuration: 4x2, Twin tires, Payload: 5530 kg, Tare weight: 6460 kg, Gross vehicle weight: 11990 kg, Total tank capacity: 250 liters, Tow hitch, Unbraked trailer load: 750 kg, Middle axle trailer load, braked: 5729 kg, Axle pin diameter: 40 DIN, Winch, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Yellow, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Lane keeping assist, Engine power: 207 kW (278 Hp), Fuel: Diesel, Euro: 6, Transmission type: Automatic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Starter battery, Pump, Number of seats: 2, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: ZF, 12 gears, Automatic Axle Configuration Tire size: 245/70R19.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 10 mm; Tire tread depth right: 10 mm; Suspension: Leaf suspension Axle 2: Twin tires; Tire tread depth left inner: 8 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 6 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Weights Unladen weight: 6,460 kg Nledpfoxmrqrsx Agyec Payload: 5,530 kg GVW: 11,990 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damages: Damaged vehicle (not roadworthy) Number of keys: 2 Financial Information Leasing price: €843 per month (default, 60 months); Ask for more information and conditions Identification Registration number: 78-BPH-9 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration can be arranged quickly • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2008, pressing force: 200 t, stroke length: 415 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table length: 4,100 mm, overall weight: 17,400 kg, Equipment: CE marking, safety light barrier, High quality, fully serviced, very clean Bystronic 4metre x 200ton cnc pressbrake for sale Pr200 200 x 4100 Make: Bystronic Model: PR 200 Pressure Reference Year / new: 2008 Total axis:6 – 4axis back gauge X R Z1 Z2 Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 200ton Cnc control: Cybelec Max stroke 415mm Rapid approach 190mm/s Bending cycle 10mm/s Nljdpfxezcw Uve Agyjc Rapid return 150mm/s

Condition: used, mileage: 77,000 km, power: 92 kW (125.09 HP), first registration: 01/2016, fuel type: diesel, color: red, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, soot filter, Now chat via WhatsApp: Quick and easy contact with our sales advisor. Attention! Sale preferably to commercial customers. Internal ID number: [3070] Nodpfezgz D Isx Agyslc ----Optional extras available: * 12–64 month warranty (valid throughout the EU) * New service inspection * New MOT & emission test * Nationwide delivery * Financing available, also with no down payment ----Vehicle highlights: * 19% VAT deductible * 1 owner * German vehicle * Accident-free * Immediately ready for use Special equipment: Storage package, audio system: radio with Bluetooth and Plug & Music, wooden floor in the cargo area, full wheel covers, spare wheel with road tires, lashing eyes on the side in the cargo area Further features: Overhead storage shelf, driver’s airbag, electrically adjustable and heated exterior mirrors, outside temperature display, brake assist, tachometer, electronic brakeforce distribution, 150 A generator, rear wing doors without windows, interior pollen filter, body/build: standard high-roof panel van, fuel tank: 105 liters, cargo partition, height-adjustable steering column (steering wheel), model update, engine 2.3 L - 92 kW dCi diesel CAT, wheelbase 3,682 mm, smoker package, low emissions according to Euro 5 standard, gear shift indicator, sliding door loading/passenger compartment right, side protection strips, seat upholstery: fabric, seats in cab: driver’s seat height adjustable, lashing eyes in cargo floor, heat-insulating glazing, permissible gross weight 3.30 t ----Looking for leasing or financing? We offer attractive options – also possible with no down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. ----Notice: All information on the internet is non-binding and serves only for general vehicle description. Errors, mistakes, and prior sale reserved. The binding specifications of the vehicle result exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: used, mileage: 350,000 km, power: 100 kW (135.96 HP), first registration: 07/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,000 mm, loading space length: 3,500 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat via WhatsApp now: Contact our sales advisor quickly and easily. Attention!!! Preferential sale to business customers only? Internal ID number: [3314] ----Optional packages available: * 12 to 64 months warranty (valid EU-wide) * New service inspection * New TÜV & emissions test * Nationwide delivery * Financing available, even without down payment * Spring offer: On request and for a surcharge of only €999: Increase of towing capacity up to 3,500 kg (depending on vehicle and manufacturer). Nedpfsy E Ekrox Agyslc ----Vehicle Highlights: * 19% VAT deductible * Regularly serviced * German vehicle * Ready for immediate use * Euro 5 standard * Refrigeration: Waeco Frigo (down to -20°C) * Cargo area: Deep-freeze insulation * Long wheelbase * Reversing camera * Automatic air conditioning * Tow bar * Bluetooth multimedia system * 3-seater Special equipment: Driver/passenger airbag, Audio system RSD 2000 (front speakers), BlueMotion Technology, Electrically adjustable and heated exterior mirrors, Wooden floor with aluminum strips at side door entry in cargo area, On-board toolkit and jack, Driver assistance system: Hill Start Assist, Driver assistance system: Front and rear parking sensors, Driver cabin interior lights: front reading lights (2), Adjustable steering column (steering wheel), Side marker lights, Double passenger bench seat in cabin, Rear step integrated into bumper, Lashing rails in load compartment (side walls and roof frame) Further equipment: Storage: shelf/compartment above windscreen, Driver airbag, Traction control (ASR), Rear right entry handle, Driver assistance system: Brake Assist (HBA), Rear wing doors without windows, Bodywork: Standard box van, Body variant: normal roof, Fuel tank: 75L, High solid partition (no window) in cargo area, Facelift model, Engine: 2.0-litre - 100 kW TDI, Parking light function, Wheelbase: 3,665 mm, Tire repair kit, Low emissions according to Euro 5, Right-hand side loading/passenger area sliding door, Seat trim/upholstery: fabric, Cabin seats: driver's seat height adjustable, Front stabilizer, Steel wheels 6.5x16, Permissible total weight: 3.50 t, Additional brake light ----Leasing or financing needed? We offer attractive options — financing possible even without down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening Hours: Mon–Fri: 9:00–18:00 Sat: 9:00–14:00 ----Note: All information provided online is non-binding and serves for general vehicle description purposes only. Errors, typing mistakes, and prior sale reserved. The binding condition of the vehicle is determined solely by the purchase contract on site or by written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: ready for operation (used), Year of construction: 1995, pressure 35.0 t plate thickness max. 8.0 mm throat 830 mm diameter of seal max. 105 mm table: 1500 x 1200 mm work height max. 920 mm die stroke ca. 90.0 mm strokes per minute ca. 200 Pressure power 220 bar oil volume 80.0 l total power requirement 4.0 kW weight of the machine ca. 3200 kg range L-W-H 1600 x 1800 x 1800 mm The IS 35 hydraulic punching machine has been specially optimized for processing sheet metal and extruded parts. It stands out for its flexibility and manufacturing precision. The machines in the IS series Nedpfjzf Nrkjx Agyslc are equipped with 35 metric tons of punching force. Features: - Electro-hydraulic punch press with long reach - Robust C-frame construction * Solid cast or welded frame (C-shape) * Extremely high punching precision * Compact design = small footprint * Hydraulic overload protection - Separate control unit - Single and continuous stroke selectable - Infinitely adjustable controller for: * â??top dead centerâ? - Continuously adjustable control for: * â??bottom dead centerâ? - Digital position display - 1x freely movable foot switch - Operating instructions (PDF)

Condition: used, We offer this used Langbow TM32-2M Twin Head Tube Bender, year of construction [not specified]. Manufacturer: Langbow Model: TM32-2M Condition: used Type: Twin Head Tube Bender The following tooling is included with the bender, 7/8"s Round Twin Tube Twin Bend 50mm Radius, 5/8"s Round Twin Tube Single Bend 60mm Radius, 1" Inch Round Single Tube Twin Bend 50mm Radius, 1" Inch Square Single Tube Twin Crush Bend 15mm Radius, 1" Inch Square Single Tube Twin Crush Bend 50mm Radius If you have any questions or need more information, feel free to send us a message or give us a call. Nsdpfxjza Eqme Agyjlc

Condition: used, Year of construction: 2007, operating hours: 74,000,000 h, MAN ROLAND 205 E0B • 5-color • Max. format: 520 mm x 740 mm • ProfitPlus Premium package including: - Double sheet feeder - Baldwin cleaning unit - Complete carton guide - EPL (Ergonomic Plate Loading) • Kersten antistatic system • Bacher register system • Powder sprayer: Grafix 72 Digital Plus • Alcosmart • PressManager Smart Interface Nlsdpfsytb Egex Agyec • Smart R 200 Online • Remote control: RCI for ink and register • ColorPilot Smart • Automatic wash-up device for: - Ink rollers, impression cylinders, blanket cylinders • Electronic sheet feeding control • Nonstop delivery • Delivery-side control panel • JobCard Reader • Carton device • In production • Location: Germany • Availability: immediately

Condition: good (used), Year of construction: 2015, functionality: fully functional, Baling press Dixi 60 SLD, year of manufacture 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Nodpfezgvbuox Agyelc Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. We will be happy to answer any questions you may have about the machine by telephone from Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available for you from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and for any errors. The offer is subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without warranty.

Condition: good (used), Year of construction: 2016, operating hours: 1,060 h, functionality: fully functional, Baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 23 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. The hydraulic hoses should be replaced. We will gladly answer any questions you have about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available to you from 08:00 to 13:00. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty. Nledpfx Aey Ni Shegysc

Condition: good (used), Year of construction: 2017, functionality: fully functional, Bale press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Type: Dixi 80 SLD Nodpfx Agsy Ni I Asyjlc Year of manufacture: 2017 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. We will be happy to answer any questions you may have about the machine by telephone from Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Baling press Dixi 60 SLS, year of manufacture 2013 Technical data: Manufacturer: Dixi Year of manufacture: 2013 Pressing force: 60 t Drive power: 11 kW, 23 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, cardboard, film The press is in good, fully functional condition and has been inspected and tested by us. You can find the video on our website or YouTube channel. We will be happy to answer any questions you may have about the machine by phone, Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available to you from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty. Nsdpfxsy Ni Hrj Agyslc

Condition: good (used), Year of construction: 2012, functionality: fully functional, Baling press Dixi 60 SLD, year of manufacture 2012 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Nledpfx Aey Ni Dqjgysc Tying: 3-strand, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Material: Paper, cardboard, film The press is in good condition. We will gladly answer any questions you have about the machine by phone, Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Baling press Dixi 60 SLD, year of manufacture 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film Nlsdoy Ni Euspfx Agyjc The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. We will be happy to answer any questions you may have about the machine by telephone from Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available for you from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and for any errors. The offer is subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without warranty.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 230 V, total length: 6,096 mm, total width: 3,730 mm, total height: 173 mm, compressed air connection: 6.9 bar, type of input current: AC, year of last overhaul: 2026, overall weight: 1,656 kg, conveyor belt width: 910 mm, product height (max.): 2,000 mm, FOR SALE – COMPLETE AUTOMATIC M&R SCREEN PRINTING PACKAGE £25,000 + VAT (ONO) Location: Mid Wales, UK Due to business closure, we’re offering our complete automatic screen printing production package for sale. This is a fully operational, professionally maintained setup that is ready for removal and installation to a new premises. Equipment Included: 2018 M&R Diamondback S - 10 station / 8 colour Automatic Press • Under 400,000 impressions • Excellent working condition • Serviced annually • Full set of adult platens • Full set of junior platens • Full set of sleeve platens • Selection of squeegees and floodbars (10+ of each) • Includes 2 x Red Chili flash cure units 2018 Radicure 36/10 Electric Conveyor Dryer • 20ft conveyor length • Excellent working condition 2014 ABAC Genesis 7.5 270 Air Compressor • Serviced annually • Fully operational Key Features: • Complete automatic production package • Low impression count for an automatic press • Professionally maintained throughout • Annual servicing on press and compressor • Ideal for established print shops looking to increase capacity or businesses moving into automatic production • Available immediately due to business closure More photos and video demonstrations are available on request. We can provide contact details for experienced machinery relocation specialists who are familiar with dismantling, transporting and reinstalling screen-printing equipment.The purchaser will be responsible for dismantling, transport and installation of the equipment. Everything clean and ready to use. Located in Mid Wales, UK. Price: £25,000 + VAT (ONO) Nledpfezb N Rtjx Agysc Serious enquiries only please - more photos and videos can be provided. Viewing is welcome upon request. This setup is a bargain and a great addition to any new or established business.

Condition: used, Year of construction: 2017, total length: 4,850 mm, total width: 2,390 mm, total height: 3,340 mm, Colour: Red Weight: 20.500 kg Price: On request - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 17650001 - Drive system: CNC - Control system brand: Bystronic - Control system type: ByVision - Power [kW]: 34.0 - Number of axes [pcs]: 8: Y1+Y2+X1+X2+R1+R2+Z1+Z2 - Press force [ton]: 250 - Max. working width [mm]: 3100 - Column gap [mm]: 3200 - Throat depth [mm]: 250 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 400 - Crowning system: CNC-controlled - Punch holder: Hydraulic - Tool holder type: WILA-standard - Tools included: Yes - Options: Additional finger stop, Lifting aid, Finger safety guard, Offline software - Transport dimensions: 4850mm x 2390mm x 3345mm (l x w x h) - Transport weight [kg]: 20500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nsdezd U H Dspfx Agyelc Lukas van Rossum

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t Nledpfx Agsy Nd Svjysc dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, Year of construction: 1976, pressure 025 t table-size 500 x 400 mm Nodpfey Nd Spex Agyjlc ram stroke - adjustable min/max 20- 120 mm throat 250 mm ram surface 350 x 250 mm strokes of ram per min. 120 shut height (stroke down, adjustm. up) 300 mm ram adjustment 60 mm tool shank hole (depth x diameter) 32 x 80 mm hole in the table 180 mm weight of the machine ca. 1,6 t Machine has adjustable table (150 mm).