Used Hego Polyform Residual Moisture Meter for sale (4,821)

Condition: new, Year of construction: 2026, Machine with special rotor Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Hjdpfxodv Eu Hs Aazeu Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2026, Condition: New Machine type: Twin-column bandsaw fully automatic Blade dimensions: 4,240 x 34 x 1.1 mm Cutting capacity (rectangular): 325 x 380 mm Cutting capacity (round): 325 mm Bundle cutting: 190 - 300 x 70 - 140 mm Cutting speed: 15 - 100 m/min (stepless) Main drive motor power: 3.7 kW Table height: 800 mm Coolant capacity: 75 L (19.8 gal) Clamping force: 18-28 kg/cm² Control method: Hydraulic, NC Automatic Single cut length: 0-403 mm Multiple cut length: 0-9,999 mm Residual piece: 50 mm Weight: approx. 1,950 kg Hedpfjyc Hd Tjx Aazsu Dimensions (W x D x H): approx. 2,410 x 2,250 x 2,250 mm Standard Equipment: - Touchscreen control - Stepless cutting speed adjustment (frequency inverter) via touchscreen - Up to 100 jobs programmable - Automatic kerf compensation - Double retracting vices - Display for blade height and cutting speed - Blade height encoder - Work lamp - Blade cleaning brush - Coolant gun - Broken blade detection sensor - Hydraulic blade tensioning - Hydraulic carbide blade guide - Hydraulic chip conveyor - Vibration damper - Manual in English - Machine feet - CE Options: - Variable pressure adjustment for clamping jaws - Hydraulic bundle clamping - 2 meter roller conveyor

Condition: excellent (used), mileage: 453,323 km, power: 165 kW (224.34 HP), first registration: 07/2002, fuel type: diesel, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, Year of construction: 2002, Equipment: ABS, air conditioning, = Additional options and accessories = Hodpfxeym Rf No Aazju - Leaf spring - Power take-off (PTO) - PTO - Radio/Cassette player - Radio/CD player - Speed limiter = Remarks = WMAL75ZZZ1Y072964 = More information = General information Cab: single Technical information Chassis type: articulated Steering: skid steer Weights Empty weight: 10.840 kg Carrying capacity: 3.160 kg GVW: 14.000 kg Functional Mast: articulated arm Mast length: 11,5 m Lifting capacity: 3.340 kg Working height: 13.500 cm Maximum reach: 1.350 cm Bucket capacity: 0,4 m³ Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Year of construction: 1996, condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Used Complete System – Fully Operational – Inspection Possible During Production For sale is a complete and fully operational STEIMEL chip conveying and de-oiling system, which is currently still in use in serial production. The system has been used exclusively for conveying and de-oiling brass chips and is being sold solely due to the modernization of our production facilities. It is a continuous centrifugal de-oiling system. A major advantage for prospective buyers is that the system can be inspected while in operation before dismantling. Technical drawings and documentation are available. Dismantling is scheduled for October 2026. This system is ideally suited for companies in the machining and metalworking industry looking for a reliable and cost-effective solution for chip handling and the recovery of oil and coolant. Technical Data Manufacturer: STEIMEL Type: Continuous Centrifugal System, Type K50 Operating Principle: Centrifugal separation Year of Manufacture: 1996 Condition: Used, fully operational. The centrifuge drum (main component) was completely overhauled and has been back in operation since June 2026. Availability: Expected from October 2026 Location: 73630 Remshalden, Germany Processed Material: Brass chips (leaded and lead-free) Performance Capacity: 2,000 kg of de-oiled chips per 24-hour operation Residual moisture achieved: between 1.8% and 4%, depending on the chip type Residual moisture can be adjusted by: * centrifuge drum speed, or * chip elevator conveying speed * Simultaneous loading of up to 8 chip carts * Chip bunker capacity: approx. 800 litres Scope of Supply * Complete chip conveying system including centrifugal de-oiling unit * Oil reservoir not included * Technical drawings and documentation included * EXW (Ex Works), loaded and ready for collection at our loading dock Hjdpezhui Hefx Aazeu Key Features * System is currently still in production use * Inspection under real production conditions possible by appointment * Robust industrial design * Proven STEIMEL quality * Sale of the complete system preferred The system has been regularly maintained and remains fully operational until dismantling. Interested buyers are welcome to inspect the equipment on site and verify its performance and condition. Additional photos, technical documentation, and engineering drawings are available upon request.

Condition: used, mileage: 9,900 km, power: 110 kW (149.56 HP), first registration: 06/2026, fuel type: diesel, overall weight: 3,500 kg, color: beige, gearing type: automatic, emission class: euro6, number of seats: 4, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal Vehicle No.: 95813_1 Equipment Lines and Packages * XM4 Acoustic package * ES5 Charging package for instrument panel * JB7 Parking package with rearview camera * Z3K Pro * X2S Sprinter Tourer * F2W Winter package Exterior * IT4 3.5-ton vehicle * QA8 Trailer coupling for increased trailer load 2.8 t/3.0 t * E43 13-pin trailer socket * K60 Exhaust pipe pointing straight to the rear * LB9 Step lights * F64 Electrically folding exterior mirrors * F68 Heated and electrically adjustable exterior mirrors * E30 Single-pole battery main switch * IC1 Model series C907 / C910 Sprinter * RH2 Tires 235/65 R16 C * V36 Headliner * LB5 Third brake light * T55 Electric operation for sliding door, right * W78 Window in rear tailgate with wiper and washer system * W16 Window, front left, fixed in side wall/sliding door * KB7 Main tank 93 liters * H22 Heated rear window * IL1 Domestic - Code * W02 Van with all-round glazing * ZM4 Combination vehicle * IK0 Complete vehicle * HX1 Refrigerant R-1234yf * CN2 Radiator grille frame in vehicle color * FK3 Chrome-plated radiator grille * LG7 LED High Performance headlights * Z2E Country version EU - EFTA - UK * Q11 Longitudinal member reinforcement * Z3T Premium complete wheel protection (3 years) * QA9 Crossmember with integrated step * IR4 Wheelbase 3665 mm * RD8 Full wheel cover * RR0 Tires, optimized for rolling resistance * RF1 Tire manufacturer Continental (10) * R87 Spare wheel * R65 Spare wheel holder under the end of the frame * Z75 Additional bodywork measures * L21 Rear reflector below * T16 Sliding door, right * CT1 Vibration damper * LB1 Side marker lights * RS3 Steel wheels 6.5 J x 16 * AI1 Control code, rear axle, bevel gear 215 * L94 Deletion of parking light * H21 Heat-absorbing glass with band filter in the windshield Interior * US1 2-seater comfort bench seat in 1st row in the rear * UR8 2-seater comfort bench seat in 2nd row in the rear * VA7 Storage compartment with net in rear doors Hodpfszk Srdsx Aazju * FJ4 Storage compartment under the dashboard * FF5 Storage compartment above the windshield * V3L All-weather floor mats * S28 Armrest, driver and front passenger door * S25 Armrest for front passenger seat * S22 Armrest for driver's seat * U75 Armrests, gear side * U74 Armrests, wall side * FG8 Cupholders, front * T86 Grab handle at rear right corner pillar * T75 Grab handles for entry, driver and front passenger * F61 Interior mirror * V21 Interior trim, luxury * FJ1 Folding cover for storage compartment * FJ5 Folding cover for storage compartments, left and right * FF0 Clothes hooks in the passenger compartment * P2O Comfort front passenger seat * LC4 Comfort roof control unit * P2N Comfort driver's seat * SK1 Comfort headrest, front passenger * SK0 Comfort headrest, driver * S31 Comfort headrests for passenger compartment seats * V39 Plastic floor, People Mover * CL3 Leather steering wheel * VF6 Imitation leather, Artico black * SE4 Lumbar support, front passenger seat * SE5 Lumbar support, driver's seat * V35 Wheel arch lining * SK2 Seat occupancy recognition, driver's seat * H15 Seat heating for front passenger * H16 Seat heating for driver * SZ8 Storage net, front passenger seat back * SZ7 Storage net, driver's seat back * ES2 12 V socket, trunk / cargo area * J10 Speedometer km/h * E1U USB socket 5 V * V31 Window pillar trim * U26 Pre-installation for seat configuration 2/2/3 * H00 Warm air channel to passenger compartment * H1I Wide-angle nozzles in the instrument panel * H04 Heat insulation, d

Condition: like new (used), Year of construction: 2004, functionality: fully functional, overall weight: 4,000 kg, total height: 2,100 mm, total width: 6,200 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,800 mm, input current: 1,250 A, Siemens Sikus Type 3200 Power Distribution Panel Sub-distribution switch cabinet, distribution panel, power distribution board 400V 1250A (for further information, please refer to image 21) 9x single cabinets 600mm – 1x 800mm = total length 6200mm (contrary to the drawing: 10x 600mm!!) Cabinet dimensions approx. H210xW60/80xD60cm each, incl. plinth and lifting eyes Connection from transformer 1250A to circuit breaker (Siemens 3WN6361-DWA05-1KA1) with coupling switch etc. (images of the circuit diagrams are attached). Three identical Siemens circuit breakers are installed. Equipped with multiple transformer metering on the main switch and residual current monitoring Busbar rated up to max 1600A Outgoing circuits: circuit breakers – Neozed NH00, NH1 fuses, etc. Excellent condition – almost as new – see pictures The dismantling was carried out by a professional electrical company. All copper busbar connectors and screws are included. Internal wiring for energy metering is pulled back and labeled. The cabinets are dismantled and packed on 5 pallets. Weight approx. 4000kg Collection only by appointment in 75053 Gondelsheim Hsdpfx Asynv H Ioazeu Forklift available for loading Shipping by freight forwarder possible, please inquire with ZIP code

Condition: excellent (used), Here we offer a Polychromix Phazir NIR spectrometer. Portable near-infrared analyzer, Model: 1624. Specifications: Spectral range: 1600-2400 nm. Hjdpfx Aaszd Uhuszeu Pixel pitch: 8 nm. Optical resolution: 11 nm. Stray light.

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 3,700 h, power: 18 kW (24.47 HP), load capacity: 570 kg, empty load weight: 3,764 kg, Equipment: all wheel drive, Total of 9 diesel-powered, all-wheel-drive scissor lifts, JLG 260MRT model. All manufactured in 2008. Operating hours according to the meter range from 772 to 4,644 hours. 3,764 kg own weight 570 kg lifting capacity 18 kW Kubota engine 9.92 meters working height Work platform is extendable in length ALL-WHEEL DRIVE with outriggers and automatic leveling immediately ready for use including CE certification Selling price: €7,700.00 net per unit! Upon request, a new Austrian inspection certificate can be provided before delivery! Hodpfx Aozh U Ddoazeu Affordable delivery also possible!

Condition: used, functionality: fully functional, Year of construction: 1994, Residual concrete recycling plant Hedpeywn U Rsfx Aazsu Feeding with screw conveyor Pumps Agitators

Condition: used, mileage: 5 km, first registration: 05/2021, Refrigerated box body with Carrier Supra 1290 Silent refrigeration unit. Loading dimensions: 7.2 meters internal length, 2.24 meters internal height, 2.47 meters internal width. Subject to errors and prior sale. Hjdpfeyp Hdyjx Aazsu

Condition: new, empty load weight: 3,860 kg, overall weight: 16,000 kg, Krone Refrigerated Swap Body Cool Box TK T-800R - New | NEW | Unladen weight: 3,860 kg | Internal width: 2.46 m | Internal height: 2.39 m | External height: 2.60 m | Mounting height: 135 cm | Mounting points: 5.85 m | Engine hours: 6 h | Errors, input mistakes and prior sale excepted. Hodpfswyuhiex Aazou

Condition: used, WTW Multi 9630 IDS Laboratory pH Meter pH Fluoride Conductivity Measuring Device TetraCon SenTix Dimensions: approx. 285 x 255 x 80 mm Weight: approx. 2.5 kg Accuracy: ±4 mbar Measuring range: 300...1100 mbar Hedpfx Aaeyh Hidszju For further technical details, please refer to the images. You are welcome to visit for an inspection. A proper invoice will be issued. For international customers, a net invoice can also be provided, subject to a valid VAT ID number. Subject to prior sale. Visit our shop to view additional offers. All company names and trademarks mentioned are property of their respective owners and are used for identification and product description purposes only. Deviations in technical data or errors in the item description may occur and are subject to change.

Condition: ready for operation (used), Hüttinger Elektronik 1324293 HF power amplifier 36/44 kW with 973412 reflectometer for laser machine, used, in good condition, 100% functional, supplied as shown in the photos. ATTENTION: Please enquire separately for charges for packing and shipping! Hjdpfsx Etu Ssx Aazsu

Condition: like new (used), Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Mini Rheometer – Precise Analysis of Crosslinking Behavior The Mini Rheometer is a high-precision testing device for determining the crosslinking behavior of rubber and other crosslinkable polymers. Versatile Application Options ✔ Determination of processing time for resins, cements, and adhesives ✔ Use in the dental industry ✔ Suitable for research, development, and rapid product inspection Efficient & Fast Testing The test duration matches exactly the crosslinking time of 1 g of material at the set temperature. Operating principle: Linear shear deformation according to DIN 53529 Part 1 Hedpfxexzrbao Aazsu Innovative Technology for Reliable Results ✔ Hinged measuring chamber with integrated sensor paddle ✔ Fast temperature stabilization due to the small chamber volume ✔ Dynamic measurement using sinusoidal shear loading with low amplitude and frequency ✔ Precise data acquisition via a load cell, connected to modern electronics & software ✔ Display of the crosslinking isotherm & evaluation according to DIN 53529 Part 2 Scope of delivery: Mini Rheometer, software, Windows 11 PC, volume punch

Condition: used, mileage: 113,000 km, power: 134 kW (182.19 HP), first registration: 04/2012, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro5, total width: 2,500 mm, total height: 3,600 mm, Year of construction: 2012, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Well-maintained IVECO with ML 120EL18 aerial work platform Equipment: Comet aerial work platform 15 meters working height 9 meters lateral working possibility. Box body for tools and for the crew's stay with auxiliary heating Numerous warning lights rotating beacons Traffic cone Additional heating and lighting in the box body Hsdpfxevm R Sfs Aazsu Ladder holder on the right side of the box body Plastic work basket for insulated electrical work Support only extends downwards Maximum support width 2,400 mm Tire condition at least approx. 60% For questions regarding the equipment, please call us. Errors and omissions excepted!

Condition: new, Year of construction: 2025, Outstanding workmanship and practical detailed solutions convince with this bending machine, the bending performance is sufficiently dimensioned with 0.65 mm sheet steel for most applications. The expansive legs of the folding machine give this machine a very safe working position and also prevent it from "tipping over" quickly during transport. Maximum working width of the press brake: 4140 mm Bending capacity: up to 0.6 mm (steel sheet) Bending machine bending angle: 145 degrees Bending beam thickness: 20 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Passage opening: 80 mm degree scale angle stop depth stops Weight of the folding bench: approx. 650 kg Shipping from Poland. Please ask! 12 MONTHS WARRANTY! Delivery: every week Hodscv S Eispfx Aazju Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: good (used), Power supply: 230V 50Hz (1-phase) very good condition - nearly new Hjdpfocip Suex Aazou

Condition: good (used), Thickness gauge, coating thickness gauge, Cross Hatch Cutter -Manufacturer: Elcometer, cross-cut device with case -Type: Elcometer 107 -Material: stainless steel / aluminum -Accessories: see photos -Dimensions: 300/270/H75mm Hjder H Nlhjpfx Aazeu -Weight: 1.1 kg

Condition: good (used), Mahr Perthen Perthometer S4P roughness tester Hjdpfxeihfmuj Aazou 1 x Mahr Perthen Perthometer S4P roughness tester 1 x Mahr Perthen 6 86 20 63 1 x Mahr Perthen 42 50 01 50 up to 160 mm Ø Find more roughness gauges in other sizes- new and used

Condition: good (used), Year of construction: 2010, functionality: fully functional, We are selling several dosing systems for liquid silicone of the brand Reinhardt - technik, model LSR 200 Modular, years 2004 to 2010. All units are operational and in good condition. Hjdpox A Sxzsfx Aazou

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer DEVICE NEEDS TO BE RECONDITIONED PRIOR TO COMMISSIONING. Complete with MSC20 Encoded Stage Controller Hodeym Dt Hopfx Aazju RL532C50 HPNIR Laser Source A-9803-0625 CCD 1. The device doesn't come with a software license or computer. We are selling the device as it is. 2. There is a HPNIR785 Renishaw Laser Source installed on the device. Unfortunately we are a surplus seller and do not possess the expertise to test and run this machine for diagnostics. Our intentions are to sell the device for parts and leave a buyer recondition to their required standards. Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel.

Condition: new, Year of construction: 2025, Yokogawa ROTAMASS Coriolis Mass Flowmeter – New Surplus New and unused Yokogawa ROTAMASS Coriolis flowmeter, supplied in original packaging. Suitable for accurate mass flow and density measurement in industrial process applications. Technical details: Manufacturer: Yokogawa Product: ROTAMASS Coriolis Flowmeter Model: RCCP25-15BA10-0C70-KF22-4-JB1 Serial No.: D12402169 Year of manufacture: 2025 Manufacturing date: 04/2025 Size: 15 mm Process connection: DN15 Pressure rating: PS 19 bar Temperature range: -40°C to +150°C Ambient temperature: -40°C to +60°C Communication: HART (4–20 mA) Supply: 24 VAC or 100–240 VAC, 50/60 Hz Enclosure: IP66/67 Ex / hazardous area approved Made in Germany Tag No.: 20FC-028 Hodpfxsz A Ddme Aazju Condition: New / unused surplus equipment. The unit is supplied in its original packaging with documentation as shown in the pictures. Availability: 1 unit available. Location: Rotterdam, The Netherlands Delivery: Worldwide shipping can be arranged. Price: On request

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Chassis: Central axle tilting trailer Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gear-supported front support leg Foldable rear support Wheel chocks with holder Underrun protection, steel Splash guards at the rear, covering the entire width (not in conjunction with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! The side panel touches the storage box when folded down. Lockable storage space for loading ramps below the loading area Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (linkage equalization) Wheels and Tires 235 / 75 R 17.5", manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Color-coded line routing for easy servicing Hodpozcv Stofx Aazeu Handwheel-operated parking brake 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Electrical System 12 to 24 Volts, multi-chamber lights in LED, yellow LED side lighting, license plate lighting in LED 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connection cable Additional LED work lights at the rear, switched via reversing light Hydraulics Three-way tipper, hydraulic multi-piston cylinder with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic flow rate of 55 l/min) Hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Tipping Platforms Stable tipping platform with 4 mm steel sheet base, side panel construction in steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts pluggable. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side panel retraction springs Platform width 2420 mm 3 pairs of lashing eyes in the floor, each 5 tons Paint Finish Frame: Hot-dip galvanized including passivation "15-year guarantee against rust through" Side panels/platform: galvanized or painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,370 mm, loading space height: 900 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 2,350 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. *Chassis – Tandem Three-Way Tipping Trailer Welded steel chassis construction Continuous rear tipping shaft with 100 mm spherical tipping bearing Two-speed landing gear at the front Foldable rear support legs Wheel chocks with holder Steel underrun protection Quarter mudguards in front of and behind each axle Anti-spray mud flaps behind each axle Lockable storage compartment for aluminium loading ramps beneath the platform 1 pair of aluminium loading ramps, approx. 3,600 mm long and 400 mm wide, load capacity 8,000 kg per pair Plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with padlock *Drawbar Drawbar with certified towing eye *Axles & Suspension BPW drum brake axles Air suspension with raise-and-lower valve *Wheels & Tyres 385/55 R 22.5 tyres, manufacturer's choice Steel rims, factory silver finish *Braking System Dual-line compressed air braking system Spring-loaded parking brake Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle EBS (Electronic Braking System) with front EBS connector and connecting cable *Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights 2 white front position lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable front plugs with connecting cable *Hydraulic System Hodpfx Ajzcyl Rsazju Three-way tipping mechanism Hydraulic multi-stage tipping cylinder with stroke limiter and safety cable Hydraulic connection with SVK coupling NW 10/3, including connecting hose Hydraulic operation via truck PTO (power take-off) *Tipping Body 4 mm HB 400 steel floor Rear spherical tipping bearing, 100 mm diameter Steel side walls, drop-down and pendulum-mounted, with central locking at the bottom Front wall and side walls approx. 800 mm high Steel rear wall approx. 600 mm high, designed as a combination pendulum tailgate Side wall return springs 4 pairs of external lashing rings in the floor, each rated at 3 t 2 pairs of recessed floor lashing rings, each rated at 5 t *Registration & Compliance Registration country: Germany DEKRA inspection and certification included 24/7 service hotline Prepared for single-line licence plate holder Reflective contour markings according to ECE R048 (white on the sides, red at the rear) Rear warning plate according to ECE 70 *Paint Finish Chassis: galvanised or painted according to customer requirements Body and side walls: painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: used, Pallet racking system by Voest, approx. 55 linear meters, used 🧰 Product features • Manufacturer: Voest • Color: green • Condition: used, see photos • Frames: 13 pcs., pre-assembled, 400 x 110 cm • Beams: 48 pcs., with a clear span of 426 cm, profile 150 x 50 mm • Safety: 96 pcs., galvanized safety pins • Fasteners: 52 pcs., Hilti concrete anchors • Load capacity: 1,600 kg per level • Field load: 8,000 kg • Load capacity label: included Over 1,000 linear meters in stock Frame heights up to 10 meters Available depths: 75 cm and 110 cm Available beam lengths: 426 cm and 566 cm Matching depth beams, insert gratings and insert shelves available upon request 💰 Price €2,250 net, excluding VAT • Quantity discounts: upon request • Shipping costs: Europe-wide, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10433 Constantly over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking systems, used & new Description: Are you looking for high-quality storage racking systems to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). Hsdezg U Adspfx Aazju ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking systems immediately available • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racks (Elvedi cantilever racks, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough clearance. 2. Commission auction: Conducting auctions on commission. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!