Used Hitachi Seiki Ht 20 S Ii for sale (83,874)

Condition: used, Year of construction: 2013, x-travel 600 mm y-travel 530 mm z-travel 510 mm Control M 730 BM MAPPS IV max. spindle speed 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 transmission ratio 1 spindle diameter in front bearing 80 mm table surface area 900 x 600 mm max. table load 800 kg T-slots 6x 18 x 100 mm distance spindle /table 150 - 660 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 150 mm max. tool length 300 mm Iedpfxsx R Enbo Acfsid max. tool weight 8,0 kg change-time tool to tool ca. 1,3 sec change-time chip to chip ca. 3,45 sec rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 30.000 mm/min Tipp feed 0 - 5.000 : 20 mm/min total power requirement 30 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - Machining Center Vertical MORI SEIKI - NVX 5060 II / 40

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035390, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: grey, The images are archive images! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel coupling with interchangeable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 x hose holders, footboards, Fliegl standard) Container fittings: 1 x 20 ft in the center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, the pivot pins of the container locking mechanism in the longer version. 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Chocks with holder Side underrun protection Rear underrun protection with deep step for easier access + footboard inside Semi-elliptical fenders with anti-spray flaps according to EC Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake Iedpfxoy Tvuws Acfsid 2 non-interchangeable coupling heads at the front, without connection line 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, the truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable additional LED work lights at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/Signage Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear The images are archive images! The vehicle may still be in use!

Condition: used, empty load weight: 2,160 kg, maximum load weight: 180 kg, overall weight: 2,340 kg, axle configuration: 1 axle, first registration: 04/2001, total height: 39,000 mm, color: green, Year of construction: 2001, operating hours: 2,737 h, fuel type: diesel, gearing type: other, driver cabin: other, construction height: 2,960,000 mm, Equipment: car registration, low noise, * German device * 1st hand * Condition see photos * Lehmann floodlight unit consisting of power generator and light mast trailer * Original only 2,737 operating hours * Last inspection at 2,700 operating hours * Electro-hydraulically controlled telescopic mast * 9.50 m extension height * Lamp holder can be rotated 360° and swiveled 180 * 2 x halogen floodlights 2,000 W each * 4 x halogen floodlights, 1,500 W each * Own diesel generator/power generator with 20 kVA/16 kw * Connected voltage 230/ 400 V/ 50 Hz * 3 x earthed sockets 16 A * 1 x CEE attachment socket 400 V 16 A * 1 x CEE add-on socket 400 V 32 A Isdpopk Awzefx Acfoid * All sockets IPX7 * Trailer operation for cars and trucks (ball head and jaw coupling) * Transport height 2.96 m * 80 Km/h approval * All motion drives are identical and can be replaced in a few simple steps * GVW: 2,340 kg * Unladen weight: 2,160 kg. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 156,000 km, power: 82 kW (111.49 HP), fuel type: gasoline, gearing type: mechanical, first registration: 05/2007, next inspection (TÜV): 12/2027, emission class: euro4, color: silver, number of seats: 5, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, soot filter, Special equipment: Metallic paint Additional equipment: Electrically adjustable and heated exterior mirrors, outside temperature display, on-board computer, comfort package, Fairway package, body: 5-door, head airbag system (window bags), lumbar support for front left seat, light alloy wheels, luxury package, model revision, engine 1.6 L - 82 kW 16V, spare wheel with road tires, side airbags in the front, front left seat height adjustable, bumpers in vehicle color, tinted glazing. Isdezhyvropfx Acfeid

Condition: excellent (used), Year of construction: 1975, For sale - Hardness tester Wolpert Testor HT2001, year of manufacture 1975 Ijdpfx Aox N Rvnecfsid

Condition: used, mileage: 285,560 km, power: 155 kW (210.74 HP), first registration: 12/1997, fuel type: diesel, empty load weight: 9,210 kg, maximum load weight: 8,790 kg, overall weight: 18,000 kg, tire size: 295/80R22.5, axle configuration: 4x2, wheelbase: 3,900 mm, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 2, loading space length: 4,200 mm, loading space width: 2,330 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, cabin, central locking, crane, differential lock, fog lights, low noise, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, steel superstructure, Kz. house, 1x comfort seat, seat heating, rear window, electric mirror, heated mirror, electric window right, sun visor, switch 6, ABS (anti-lock braking system), power take-off, exhaust raised, central lubrication system, differential lock, fog lights, driving lights, storage box, leaf spring suspension, low-noise G1, winter service equipment, swing flaps, crane behind house, emergency stop, grab control, foldable, 2-point hydraulic stabilizer, radio remote control, 2x hydr, radio remote control, 2x hydr. extensions, red environmental badge Wheelbase: 3900 mm Body: Meiller 3-sided tipper body with aluminum side wall elevations & crane Palfinger PK8501-K A (year 2010), radio control front attachment plate! Crane from year of construction 2010! Beilhack snow plow -8571- type PEV 262, 2,6m clearing width, weight 730Kg, year of construction 1982 available for an extra charge of 1.500,00€ net! Rear axle H7 I=4.7, front axle reinforced, ABS, clutch reinforced, brake pad wear indicator, RQV controller with ZDA, radiator increased power level I, flame system, transmission oil cooling, driver comfort package, central lubrication system, Flexible Diagnostic System (FDS), rear parabolic springs reinforced level I. Grapple -8569- available for an extra charge of € 2,500.00 net! Load diagram: 3.5m-2200kg, 5.3m-1440kg, 7.1m-1060kg. 4000.- invested in technology and part paint Cab is original paint 6cylinder engine 200-240hp ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Iedpfx Aovhi Eaocfjid

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 2,000 kg, Sideros turning device, column lifting and rotating unit, mobile on one side with positioning table. 2-ton load capacity. New, year of manufacture 2020, unused, with remote control. Minimum working height 350 mm. Maximum working height 1800 mm. Torque 3000 Nm. Speed 1 rpm. Vertical adjustment speed 560 mm/min. Vertical adjustment 1450 mm. Clamping plate diameter 600 mm. Motor power 4.45 kW. Rotational drive 0.75 kW. Lifting motor 1.85 kW. Machine height 2505 mm. Weight approx. 1050 kg. Condition: as new, unused. Shipping possible. Includes documentation, drawings, etc. Iiedpfx Asyr Affecfod

Condition: new, axle configuration: 2 axles, loading space length: 66,000 mm, suspension: air, tire size: 275/70-22,5, wheelbase: 4,940 mm, color: black, = Additional Options and Accessories = Iodpfx Asza Sp Necfoid - LED lighting - Air suspension = Notes = Internal number for customer inquiries: 2-374 SPECIAL PROMOTION PRICE PAVIC HTA 20 66Z short log trailer in a well-proven design, always in stock at PAVIC! IMMEDIATELY AVAILABLE! You can choose the color of the stake stripes from red, green, blue, neon red, neon yellow, or black! 2-axle skeletal trailer * 4x OPTIPA SL bolsters * 8x OPTIPA AL10 load securing beams * Chassis length approx. 6600 mm * Front overhang approx. 710 mm (turntable bolster) * Screw-on hooks on the loading bolsters for securing the load * Axle loads: 18,000 kg (2 x 9,000 kg, technically 2 x 10,000 kg) * EBS / ABS * Air suspension with safety cables, leaf spring suspension available upon request * 2 x 10t SAF off-road axles with drum brakes or disc brakes, respectively, in stock * Steering ring with double ball bearing row, permissible vertical load max. 20 tons * Lifting cable at the front * Smartboard Wabco * Signal lamp system at the front, clearly visible for indicating the maximum air spring pressure * LED lighting * LED work lights * High-quality KTL coating - including baking process * Twin tires: 275/70 R 22.5 with branded tires on steel rims * Optional: ALU rims from ALCOA Dura-Bright available at an extra charge * Optional with quick-release fastener (adjustable fastening on ball roller) for bolsters 1 & 4. Immediately Available! Financing is possible through our financing partners. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = Axle configuration: Tire size: 275/70-22.5 Brakes: Drum brakes Suspension: Air suspension Front axle: Steered Weights Unladen weight: 3,420 kg Payload: 14,580 kg GVW: 18,000 kg Functional Body brand: PAVIC short log skeletal OPTIPA SL Loading platform height: 120 cm Condition Overall condition: very good Technical condition: very good Optical condition: very good

Condition: used, Year of construction: 2003, functionality: fully functional, Well-maintained slicer. Iedpfxszfizxs Acfjid

Condition: ready for operation (used), Year of construction: 2016, operating hours: 29,600 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 530 mm, displacement volume: 412 cm³, injection pressure: 1,820 bar, TECHNICAL DETAILS Clamping force: 2,000 kN Screw diameter: 50 mm Distance between columns: 530 mm Injection volume: 412 cm³ Injection pressure: 1,820 bar Shot weight: 375 g Mold height (min.): 200 mm Ejector force: 62,000 N Ejector stroke: 140 mm Opening stroke: 490 mm MACHINE DETAILS Control system: KEBA 1075 button control Installation height: 550 mm Dimensions & Weight Dimensions (L x W): 6,000 x 1,530 mm Total weight: 7,100 kg Heating power: 18 kW Pump power: 18,500 W Operating hours: 29,600 h EQUIPMENT Energy-saving servo-hydraulic system 2 x hydraulic core pull Iisdpfx Acozavalofjd 2 x air valve Euromap 67 interface for robots Newly installed, hardened screw and cylinder unit with 50 mm screw

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2012, loading space length: 9,450 mm, loading space width: 2,550 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,790 mm, Year of construction: 2012, Equipment: ABS, = Additional options and equipment = - ADR specification - EBS (Electronic Braking System) - Lift axle - Alloy wheels - Air suspension - Disc brakes = Remarks = Very nice 2012 BURG 20FT ADR swap body chassis with SAF axles featuring disc brakes (INTRADISC), ADR (EX/II, EX/III, FL, AT), ABS/EBS, 1st and 2nd axle are lift axles, unladen weight: 3,690 kg, max. gross weight: 39,000 kg, 385/65-R22.5 tires (left: 10/11/11mm; right: 8/12/11mm), Dutch registration = Further information = Axle configuration Tire size: 385/65-R22.5 Axle make: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 60%; Tire tread right: 50% Rear axle 2: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 70%; Tire tread right: 75% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 70%; Tire tread right: 70% Weights Unladen weight: 3,690 kg Isdpfxoyr Rtqs Acfoid Payload: 35,310 kg Gross vehicle weight: 39,000 kg Functional Body make: BURG O-3-CC A7 Condition Technical condition: very good Visual condition: very good Identification Registration number: OL-67-RJ Further information Please contact Arne Honingh for more information.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Iiodpfx Aoi Rixkocfed Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD396, DEMAG KBK Crane Ceiling Crane Runway with dimensions approx. 19.5x7m (2x 7m bridge) Payload / Lifting Capacity: 2x 250 kg - 0.25 t Technical Data of the System: Runway made from Demag KBK2 rails, one side with KBKII-R rails featuring integrated power feed System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. including 2 bridges, each 250 kg including 2x 250 kg Demag DC chain hoists Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight carrier or collection only by appointment Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems available. Load capacities from 125 kg to 1600 kg Iisdpfx Acsxdvn Ajfed Please inquire about your crane runway with required capacity and dimensions, non-binding.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2012, loading space length: 9,450 mm, loading space width: 2,550 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,790 mm, Year of construction: 2012, Equipment: ABS, = Additional options and accessories = - ADR - EBS - Lift axle - Alloy wheels - Air suspension - Disc brakes = Notes = Very nice 2012 BURG 20FT ADR swap body chassis with SAF axles equipped with disc brakes (INTRADISC), ADR (EX/II, EX/III, FL, AT) approval valid until 12.04.2025, ABS/EBS, 1st axle + 2nd axle = lift axles, unladen weight: 3,690 kg, max. weight: 39,000 kg, 385/65-R22.5 tires (L: 8/13/15mm; R: 8/4/7mm), Dutch registration = Further information = Axle configuration Tyre size: 385/65-R22.5 Axle make: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Ijdpfx Aoyr Rvxscfeid Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Lift axle; Max. axle load: 9,000 kg; Tyre profile left: 80%; Tyre profile right: 25% Rear axle 3: Max. axle load: 9,000 kg; Tyre profile left: 95%; Tyre profile right: 45% Weights Unladen weight: 3,690 kg Payload: 35,310 kg Gross vehicle weight: 39,000 kg Functional Body make: BURG O-3-CC A7 Condition Technical condition: very good Visual condition: very good Identification Registration number: OL-97-TP Further information For more information, please contact Arne Honingh.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2012, loading space length: 9,450 mm, loading space width: 2,550 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,790 mm, Year of construction: 2012, Equipment: ABS, = Additional options and accessories = - ADR compliant - EBS (Electronic Braking System) - Lift axle - Alloy wheels - Air suspension - Disc brakes Iiodeyx Htnjpfx Acfsd = Notes = Package of 3xx: very nice 2012 BURG 20FT ADR swap chassis with SAF axles and disc brakes (INTRADISC), ADR (EX/II, EX/III, FL, AT) valid until 29.06.2025, ABS/EBS, 1st and 2nd axle are lift axles, unladen weight: 3,690 kg, max. permissible weight: 39,000 kg, 385/65-R22.5 tires, Dutch registration = Further information = Axle configuration Tyre size: 385/65-R22.5 Axle make: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 75%; Tyre tread right: 80% Rear axle 2: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 55%; Tyre tread right: 55% Rear axle 3: Alloy wheels; Max. axle load: 9,000 kg; Tyre tread left: 75%; Tyre tread right: 75% Weights Unladen weight: 3,690 kg Payload: 35,310 kg GVW: 39,000 kg Functional Body make: BURG O-3-CC A7 Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2005, total length: 9,060 mm, total width: 2,520 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,450 mm, Year of construction: 2005, Equipment: ABS, = Additional Features and Equipment = - ADR - EBS - Lift axle - Air suspension - Disc brakes = Notes = Well-maintained 2005 Van Hool 20FT tipping chassis, SAF axles with disc brakes (Intradisc), ABS, 2 x lift axle, ADR (EXII, EXIII, FL, AT), tiltable up to 20 degrees, 24V, unladen weight: 5,200 kg, gross vehicle weight: 39,000 kg, 385/65-R22.5 tyres (L: 8/17/8mm; R: 7/10/7mm), Dutch registration. = Further Information = Iisdpevt A Hnofx Acfed Axle Configuration Tyre size: 385/65-R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 45% Rear axle 2: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 100%; Tyre tread right: 60% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 45% Weights Unladen weight: 5,200 kg Payload: 33,800 kg Gross vehicle weight: 39,000 kg Functional Body manufacturer: Van Hool 3B2013 Condition Technical condition: very good Optical condition: very good Identification Registration number: OH-71-VY Further Information Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2005, total length: 9,060 mm, total width: 2,520 mm, suspension: air, tire size: 385/65 R22.5, wheelbase: 7,450 mm, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - ADR - EBS - Lift axle - Air suspension - Disc brakes = Notes = Attractive 2005 Van Hool 20FT tipping chassis, SAF axles with disc brakes (Intradisc), ABS, 2 x lift axles, ADR (EXII, EXIII, FL, AT), tiltable up to 20 degrees, 24V, unladen weight: 5,200 kg, max. gross weight: 39,000 kg, 385/65-R22.5 tires (L: 8/8/7 mm; R: 8/7/6 mm), Dutch registration. = Further information = Axle configuration Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire size: 385/65 R22.5; Lift axle; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Tire size: 385/65 R22.5; Lift axle; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 45% Rear axle 3: Tire size: 385/65 R22.5; Max. axle load: 9,000 kg; Tire tread left: 45%; Tire tread right: 40% Weights Unladen weight: 5,200 kg Payload: 33,800 kg Gross vehicle weight: 39,000 kg Functional Body brand: Van Hool 3B2013 Condition Technical condition: very good Visual condition: very good Identification Registration number: OH-68-VY Further information Iedpfxjy H Hd Ao Acfeid Please contact Arne Honingh for more information.

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Iiedpjy U Nqbjfx Acfsd

Condition: excellent (used), Year of construction: 2004, operating hours: 34,500 h, functionality: fully functional, Equipment: documentation/manual, EQUIPMENT: FANUC 18i control Backside machining Synchronized spindle Driven tools C-axis Iiodpoy Hq Tzsfx Acfed Parts conveyor Bar feeder FMB TURBO 3-26

Condition: used, Hydraulic plate shear STEINER, Type HTS 30/20 R Machine No. 315 Year of manufacture 1982 Cutting length 3050 mm Cutting thickness 20 mm Back gauge 800 mm, controlled Motor power approx. 30 kW Power connection 400 volts, 50 Hz - Back gauge with positioning control ELGO - Back gauge adjustment via ball screws - Safety light curtain SICK at the front as a guard - 3 units of material support arms with ball rollers - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very robust machine with a very stable design Space requirement of the base machine L x W x H 4650 x 2610 x 3200 mm Weight of the base machine 27000 kg Space requirement for transport (base machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Total weight 27000 kg Good condition Machine can be inspected in warehouse 37235 Hessisch Lichtenau, test cuts possible. The lower clamps are currently being re-sealed, and the corresponding price adjustment will be made in the next few days. Iodpfx Acod Hxx Ajfeid

Year of construction: 2012, condition: used, functionality: fully functional, For sale are 3 ballistic separators from Hartner. Two of them are still integrated into our production and can be inspected on site. The conversion is scheduled for around the beginning of June 2026. All technical data can be found in the images. If you have any further questions, please feel free to contact us. Iisdsyrnguopfx Acfed

Condition: used, mileage: 168,109 km, power: 100 kW (135.96 HP), fuel type: diesel, overall weight: 3,500 kg, maximum load weight: 900 kg, first registration: 03/2016, emission class: euro5, number of seats: 3, Equipment: ABS, power assisted steering, For information Iisdpfjwyya Rox Acfod

Condition: excellent (used), Year of construction: 2003, Haver & Boecker SWA/MECII-20 Loading device  Iedpfjg Sfa Tox Acfoid Haver & Boecker SWA/MECII-20 Loose loading device with scale for loading trucks or wagons with bulk material Suitable for free-flowing, non-dusty bulk materials  Description Brand: Haver & Boecker Type: SWA/MECII-20 Year: 2003 Temperature limits: -10 ° C / 40 ° C Voltage: 230V Frequency: 50 Hz Pneumatic pressure: 5 bar; Max 40 kg Min 10 kg Dimensions: Section I L2.43 x W187 x H310 Section II L240 x B240 x H310 Haver Nettowage with rack Weighing and evaluation electronics MEC II-20 for control of weighing and/or machine functions Advantages - high operating comfort - easy programmability - PTB and OIML approval - 99 product type memories - Operator guidance via plain text display in 6 selectable languages BT 15 operating terminal For automatic remote product type adjustment,  incl. motorised adjustment of bag length/width parameters. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, -Used -Wind and waterproof -available immediately -The price is ex-depot Duisburg (also available in other regions on request) -We are happy to take care of delivery and crane unloading (costs on request) Our 20-foot storage container is the perfect solution for your storage needs. It offers you a safe, flexible and cost-effective way to store your goods and materials. Whether for use on construction sites, in industry or for private purposes - this container meets the highest standards of quality and functionality. Product features: - Dimensions: 20 feet (6.06 m) long, 2.44 m wide and 2.59 m high - Volume: Approx. 33 m³, ideal for storing large quantities of goods - Material: Robust steel construction that guarantees durability and resistance - Security: Equipped with a reliable locking system and reinforced doors to optimally protect your stored goods - Weatherproof: Weatherproof and corrosion-resistant coating that protects your goods from rain, sun and other environmental influences - Ventilation: Strategically placed ventilation openings prevent the accumulation of moisture and ensure an optimal storage climate Applications: Iisdpfovyabvox Acfjd The 20 foot storage container is ideal for storing tools, machines, materials, furniture and much more. It can be used both temporarily and permanently and is ideal for construction sites, warehouses, events or as additional storage space for your company. Additional benefits: - Easy handling: Thanks to the standardized dimensions, the container is easy to transport and place. - Flexibility: The container can be used in different locations and is mobile, so you can move it if necessary. Customization: On request, we offer individual modifications to meet specific requirements, such as shelving systems or additional ventilation. Rely on our new 20-foot storage container for safe and efficient storage of your goods!

Condition: good (used), Year of construction: 1993, Panel Saw Iodpjw N Saaefx Acfsid Manufacturer: Striebig Model: Standard II Plus 6220 A Year of manufacture: 1993 Cutting length: 5,300 mm Vertical cutting height: 2,200 mm Horizontal cutting height: 2,100 mm Cutting depth: 80 mm Saw blade diameter: 300 mm Speed: 4,750 rpm Power: 4 kW Dimensions: 6,470 x 1,281 x 2,885 mm