Used Müller Ze 625 4 for sale (60,080)

Year of construction: 2021, condition: used, Configuration: · upright transport | single-lane · manual format adjustment · infeed · 90° curve · intermediate section · 90° curve Dodexc I A Aepfx Akrjck · Exit Technical specifications: Total width: 4.300 mm

Condition: new, Year of construction: 2026, functionality: fully functional, usable tank capacity: 120 l, inner dimension width: 400 mm, inner dimension length: 930 mm, Müller Mechanik – Vibratory Finishing Technology – MADE IN GERMANY – Dcedpfx Akofid Tcerjk Our trough vibrators replace manual deburring and grinding processes. In the future, avoid time-consuming and costly manual work! With the trough vibrators from Müller Mechanik, you will achieve reproducible processing results of high quality. MMTV-9341 – Technical Data: - Usable volume: 120 dm3 - Trough internal dimensions: 930 x 410 x 510 mm - Wear-resistant coating: Polyurethane, 18 – 20 mm - Maximum payload: 400 kg - Empty weight: approx. 490 kg - Operating voltage: 3N ~ 50 Hz 400 / 230 V - Connected power: 1.5 kW - Motor rated speed: 1,500 min-1 - Speed control stepless via frequency inverter

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2026, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, total width: 2,550 mm, total height: 970 mm, Year of construction: 2026, Equipment: ABS, Müller-Mitteltal KA-TA-R 11.9 ML / 024 TRIDEM TANDEM DUMP TRUCK - Dump body 5,000 x 2,420 mm (external dimensions) - Side board height 500 mm - Floor made of fine-grain steel S 420 MC, 4 mm thick - Side boards laser-welded from fine-grain steel, front wall fixed - 2 pairs of folding lashing eyes with lashing capacity LC 5000 daN, each pair recessed into the steel floor at the front and rear. 4 pairs of folding lashing eyes with LC 3000 daN recessed into the steel floor. - Mesh hooks integrated on each side and at the rear in the side board supports and in the front wall. - Reinforced and certified body according to EN 12642 XL - 2 LED reversing lights on the rear of the trailer - Aluminum loading ramps without a track for rubber-tired and tracked vehicles (8 t/pair), 3,310 x 400 x 105 mm - Plastic toolbox - Aluminum compressed air tank - BPW, with S-cam brake - Tires 235/75R17.5 Suitable for a coupling height of approximately 925 mm unladen +/- 150 mm Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note - Important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Djdsy S Nwvepfx Akrsck Legal: This sales advertisement does not constitute an offer in the sense of § 145 BGB. Rather, it provides information for initiating a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: excellent (used), Condition: used, fully functional Manufacturer: BÜHNEN / MELER Model: HB 6050-2 NI120 📋 Item Description: For sale: professional HOT-MELT adhesive unit BÜHNEN / MELER 6050 designed for industrial glue application. High-quality device – European-made, suitable for use in: packaging furniture manufacturing wood industry production lines ⚙️ Technical data (from the nameplate): Power supply: 230V / 50-60 Hz 400V (3-phase) Power: up to 4.7 kW Max. temperature: 200°C Max. pressure: up to 160 bar Outlets: 2 Model: HB 6050-2 NI120 📦 Included: ✔️ BÜHNEN / MELER adhesive unit ✔️ 4 heated hoses (complete set!) ✔️ Cables and connectors as shown in the photos 🔍 Condition: used item shows normal signs of use in good technical condition Dodsy Aam Nopfx Akrjck tank interior shown in photos sold exactly as pictured

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device visually normal signs of use Dcsdpfx Aksy Aagijrok no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Condition: used, empty load weight: 5,080 kg, maximum load weight: 18,920 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 11/2022, next inspection (TÜV): 11/2025, suspension: air, tire size: 265/70 R19,5, Equipment: ABS, Schwarzmüller N Series timber trailer | BPW axles | Air suspension | Tyres: 385/65 R22.5 | Good condition | 4 pairs of stakes | Approx. 6.60m loading area | Drum brakes | Subject to errors and prior sale. Dodoy Th N Hspfx Akrock

Condition: used, Year of construction: 1978, machine/vehicle number: 455 178, pression: 45 t throat: 230 mm table size: 460 x 690 mm clearance hole in the die: 175 x 220 mm table adjustment: 160 mm tappet area: 185 x 360 mm tappet adjustment: 55 mm stroke adjustment: 4 - 80 mm Dcjdpedd Irgsfx Akrek number of strokes: 120 /min engine: 380 V, 3 kW space needed: 1800 x 1100 x 2100 mm weight: 2800 kg

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 300 mm, table width: 1,400 mm, installation height: 500 mm, • Type of machine: Hydraulic press / C-frame press • Manufacturer: Müller Weingarten (historic German engineering company) • Model designation: CKD 100 4.1 • Applications: • Forming, punching, pressing of metal or plastic components • Small and medium batch production • Tool and die making • Design: Robust H-frame or single-column construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (number indicates approx. 100 metric tons nominal force—common for CKD models) 📐 Typical Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Sufficient for versatile applications (e.g. drawing, bending, punching) • Stable construction: Designed for continuous industrial operation • Tool integration: Mounting options for custom tools and dies • Operation: Usually manual or semi-automatic, depending on year of manufacture Dcjdpfx Aksx Ry Hrsrsk 🧱 Typical Uses Hydraulic presses like the CKD series are used in production for: • Metal forming (e.g. bending, deep-drawing) • Assembling components by pressing • Assembly processes with defined force • Quality assurance and test pressing Complete circuit diagrams and documentation available! Inspection under power possible at any time.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata Dcsdpfx Aer Ix Igekrok 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: used, axle configuration: 2 axles, total width: 25,000 mm, total height: 40,000 mm, Year of construction: 2014, Equipment: ABS, For inquiries regarding the vehicle, Mr. Seidel will assist you (by telephone). MÜLLER MITTELTAL SF32BM/BT Concrete Mixer Semi-Trailer Superstructure: Liebherr HTM 1004 10m³, BPW axles, drum brakes, spring-loaded brakes, Wabco ABS, 1st axle liftable, air suspension, permissible total weight: 32,000 kg, unladen weight: 6,510 kg, payload: 25,490 kg, tire tread depth: 1st axle 14-15mm, 2nd axle 10mm Djdpfxjyfu Sdo Akrock Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (tel.) is happy to assist you. Further information can be found on our homepage. ... Subject to errors, changes, and prior sale!!! = Further Information = GVW: 32,000 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 1987, pressure 45 t throat 230 mm Dodpfjw E Nuzsx Akrsck stroke 4-80 mm no. of strokes 120 Hub/min ram - range of adjustment 55 mm table surface area 695x455 mm ram surface 365x180 mm hole in the table 220x180 mm table height 890 mm tool hole in ram Ø 40 mm

Condition: good (used), Year of construction: 1988, machine/vehicle number: 222 056 A110, Müller Weingarten CE 40.25.4 Press -WAG 850 The machine is tested according to VDE until 23.09.2026. Dcsdpfsqrqz Ajx Akrok Manufacturer: Müller Weingarten Operating voltage: 380 V Control voltage: 220 V Direct voltage: 24 V Rated current of the machine: 25 A Per/s: 50 Delivered: 1988 Overtravel: 9 mm Overtravel time: 80 ms Safety distance: 128 mm

Condition: used, Year of construction: 2015, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of axes: 4, number of slots in tool magazine: 16, Equipment: CE marking, For sale is a well-equipped CNC machining center, FORMAT-4 profit H10 22.32, manufactured in 2015. This machine is perfectly suited for precise processing of wood, MDF, plastics, and sheet materials. The FORMAT-4 H10 stands out for its high traverse speeds and robust construction. Particularly noteworthy are the powerful 10 kW HSK-F63 milling spindle, the 360° C-axis, and a total of 16 tool positions. Technical Data * Manufacturer: FORMAT-4 * Model: profit H10 22.32 * Year of manufacture: 2015 * Type: CNC machining center Working Area * X axis: 3,120 mm * Y axis: 2,160 mm * Z axis: 105 mm Traverse Paths * X: 4,050 mm * Y: 2,560 mm Djdpfx Akey Smi Aorjck * Z: 280 mm Traverse Speed * X/Y: 100 m/min * Z: 30 m/min Milling Spindle * 10 kW HSK-F63 milling spindle * Speed range: 1,000 – 24,000 rpm * Clockwise/counterclockwise rotation * Ceramic bearings * Air-cooled Tool Changer * 2 tool changers with a total of 16 tool positions * HSK-F63 interface * Tool slots on the machine frame and mounted laterally Additional Units * C-axis 0–360° Vacuum/Table * Matrix/grid table * 2 vacuum pumps, each 250 m³/h * Two rows of stops Control/Software * FORMAT-4 H10 control system * WoodFlash software * DXF import * 3D graphic display * Parametric programming * Tool database for up to 500 tools * Mobile operator console * Handheld terminal Additional Equipment * Automatic central lubrication * UPS for the control computer * Network/internet preparation * Central extraction system * Preparation for drilling head * Operator tools and documentation included Condition: Machine from ongoing production. Well-maintained condition. Inspection by appointment possible.

Year of construction: 1997, condition: ready for operation (used), Built in 1997 Size main product max 420x310x70 mm Size main product min 200x120x1 mm Size supplement max 420x310x8 mm Size supplement 90x75x1 mm Mechanical speed 18.000 c/h Equipment • book block feeder • main product feeder • opening station with sucker and sword • 2 insert feeders • 2nd suction opening unit • 2 insert feeders • bump turn with vacuum belt • connected with compensating stacker • compensating stacker Rapido Dcsdpfx Akod Hguisrek

Condition: good (used), Year of construction: 2001, Format: max 360 x 310 mm; min 140 x 100 mm Djdpfxsq Rv Hto Akrsck Book block thickness: max 60 mm; min 3 mm Cover format: max 642 mm; min 203 mm Output: max 18,000 c/h Equipment Gathering machine - Clamping element - 18 feeder 3681 - Diverter 3714 Controls - Double and missing sheet control - ASAC automatic self-adjusting caliper Intermediate modules - 2 vibrating elements 3642 - coupled with adhesive binder - Commander - 41 clamps - Infeed channel with vibration direction - 2 milling stations - 2-fold combi spine processing - 2 hotmelt spine gluing units - Hotmelt side gluing unit - 3 premelters - SF shingle cover feeder - SF cover pressing - 2nd SF cover pressing unit - Plate chain Laydown conveyor Cooling section - inline with - Zenith S three-knife trimmer Optional accessories---not included in the scope of delivery-- - compensating stacker - film wrapper - palletizer

Condition: good (used), Year of construction: 2007, Built in: 2007 Size: max 480 x 320 mm; min 200 x 110 mm bar length (pressed): max 1200 mm; min 800 mm Type of pallet: Euro pallet Cycle time: min 30 s/unit Air requirement: 10 Nm3/h, 6 bar Electrics: 380 VAC Electrics: 3 PH Electrics: 50 Hz Dcjdpfx Aeqqi Scekrjk Electrics: 5,5 kW Dimensions (L x W x H): 2000 x 3000 x 3100 mm Weight: 2000 kg

Condition: used, Year of construction: 1995, Product size: max 480 x 320 mm; min 200 x 110 mm Bar length: 800-1200 mm Pallet type: Euro pallet Dcodpsq Tcqvjfx Akrjk Pallet height (including pallet): max 1450 mm Cycle time: min 30 s/unit Air requirement: 10 Nm3/h at 6 bar Electrical connection: 380 VAC Electrical connection: 50 Hz Electrical power consumption: 5.5 kW Dimensions (L x W x H): 2000 x 3000 x 3100 mm Weight: 2000 kg Equipment Control system - Siemens control - Pallet despencer - Pallet conveyor line

Condition: good (used), Year of construction: 2001, Year of construction: 2001 Format: max 480 x 320 mm; min 200 x 110 mm mech. speed: 1.0 m/s Dcjdpfxjq Tcigo Akrek Air requirement (at 6 bar): 5 m³/h Net weight: 4,100 kg (approx.) Equipment - Delivery right Strapping system - Strapex

Condition: good (used), Year of construction: 2007, Size: max 480 x 320 mm; min 200 x 110 mm Mech. Speed: 1,0 m/s Air requirement (6 bar): 5 m³/h Weight: 4.100 kg (approx.) Dsdpeqqiplofx Akrjck Equipment - belt delivery left - Strapping system: Mosca

Year of construction: 1996, condition: good (used), Built in: 1996 Size: max 320 x 510 x 4 mm min 80 x 120 mm Number of stitches: Standard 13 Stitching length: 16,5 mm Dodpfxed Sqcls Akrock Mechanical speed: 12.000 c/h

Year of construction: 2001, condition: used, Built in 2001 Djdpoc H Sc Ijfx Akreck

Year of construction: 1999, condition: ready for operation (used), Built in 1999 Dcedpjd N D Ngjfx Akrjk Equipment: 4 printroll unwinding stations 0350.0416 • 43470 hours printoll 1 • 47630 hours printroll 2 • 46488 hours printroll 3 • 44802 hours printroll 4

Year of construction: 1996, condition: used, Wind-up double Built in 1996 Dcededitlwepfx Akrek

Year of construction: 1996, condition: good (used), Built in 1996 Size: max 304 x 340 mm Dsdpfxodykhfo Akrock min 146 x 103 mm Speed max 7.000 c/h Equipment: • 2 sets of knife holders • 2 set of knives • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of quick change cassettes standard size

Year of construction: 2004, condition: good (used), Three knife trimmer automatic with integrated pre stacker Built in 2004 Size: max 384 x 340 mm min 140 x 103 mm Size trimmed: max 304 x 310 mm min 136 x 100 mm Book thickness: max 70 mm min 2 mm Speed: max 1.000-7.000 c/h Power requirement: kW 14 kW Dsdpfx Akjf Iyb Nerjck Compressed air: 40 Nm³/h bei 6 bar Width: 3.612 mm Depth: 2.950 mm Height: 2.030 mm Weight: 4.000 kg (approx.) Equipment equipment for changing the format: - 1 set of pressing plates & holders - 1 set of size extensions - 1 set of table quick change plates - 3 sets of cutting sticks - 2 set of knives