Used wide belt sanders for sale (14)

Condition: used, Year of construction: 1989, band width 150 mm band length 3500 mm band speed 30 m/sec Scheiben-Ø 400 mm grinding feed 0 - 5 m/min work piece revolutions 0 - 140 U/min power capacity - workpiece power 2,2 kW grinding diameter 100 - 600 mm clamping length 6000 mm bed length ca. 8000 mm Dsdpoyw Tkkjfx Anzskr voltage 380 V / 50 Hz motor speeds: 1450 U/min power capacity 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. 8,6 x 2,6 x 2,5 m

Condition: ready for operation (used), Year of construction: 2010, working width: 1,350 mm, Belt sander manufactured in 2010. This VIET S3 333 features a working width of 1350 mm and accommodates workpiece thickness from 3 to 160 mm. It includes three sanding units with powerful 4 kW motors and a conveyor group speed of 3-16 m/min. If you are looking to get high-quality sanding capabilities, consider the VIET S3 333 belt sander we have for sale. Contact us for further details. • 1st Sanding Unit (Composition): Spinbrush • 1st Sanding Unit (Motorization): INV 4 kW Dedpfxsyu Tfzj Anzskr • 2nd Sanding Unit (Composition): Brush • 2nd Sanding Unit (Motorization): INV 4 kW • 3rd Sanding Unit (Composition): Brush • 3rd Sanding Unit (Motorization): INV 4 kW • Conveyor Group: 3–16 m/min • Conveyor Group (Motorization): INV 3 kW • Adjustment/Rise (Motorization): MTR 0.37 kW • Vacuum Pump (Motorization): MT 4 kW • Mass: 4170 kg • Workpiece Thickness: 3–160 mm • Operating Voltage: 3 AC - 400 V • Frequency: 50 Hz • Current Draw: 48.9 A • Motor with Max Current Draw: 8 A • Minimum Compressed Air Pressure: 6 - 86 bar-Psi • Maximum Compressed Air Pressure: 8 - 116 bar-Psi • Compressed Air Consumption: 1441 Nl/min • Minimum Suction Flow Speed: 25 m/s • Minimum Suction Capacity: 6190 m³/h • Noise Level (Idle): 75 dB(A) • Noise Level (Operating): 76 dB(A)

Condition: ready for operation (used), Year of construction: 2006, Belt sander manufactured in 2006. This VIET S3 223TM features a sanding width of 1300 mm and includes a 1st cross-belt unit along with a 2nd combination unit for calibrating and sanding. The sanding shoe is equipped with contact segments spaced 25 mm apart, ideal for sanding painted surfaces. If you are looking to get high-quality sanding capabilities, consider the VIET S3 223TM machine we have for sale. Contact us for further details. Djdpfx Aszcydgenzokr Used wide-belt sanderBrand: VietType: S3 223TMYear of manufacture: 2006Technical data- Sanding width: 1300 mm- 1st cross-belt unit- 2nd combination unit: calibrating and sanding shoe.- The sanding shoe is equipped with contact segments spaced 25 mm apart and is also ideal for sanding painted surfaces- Brush roller for dust removal from sanded surfaces- Vacuum conveyor belt- Ionization bar to prevent static buildup at the machine outlet.- The control display was replaced with a new one 2 years agoNote:The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2019, total width: 2,100 mm, total height: 3,000 mm, working width: 1,300 mm, overall weight: 14,500 kg, product length (max.): 3,100 mm, Belt sander manufactured in 2019. This Lingi Jianzhong BSG2613C features a maximum working width of 1300 mm and a processing thickness range of 5-80 mm. It includes a grinding belt dimension of 1350x2800 mm and operates at a speed of 31 m/s. If you are looking to get high-quality sanding capabilities, consider the Lingi Jianzhong BSG2613C machine we have for sale. Contact us for further details. • Condition: Not rebuilt, without warranty • Technical specifications: • Processing thickness: 5–80 mm Dkjdpfxezb Hxue Anzer • Minimum processing length: ≥ 780 mm • Machining accuracy: ±0.08 mm • Grinding belt dimensions: 1350 × 2800 mm • Grinding belt speed: 31 m/s • Roller diameter: 2 × Ø320 mm • Total power: 165 kW • Main motor power: 2 × 75 kW • Feed motor: 11 kW • Lift motor: 2 × 0.75 kW • Brush motor: 2 × 0.75 kW • Feed speed: 10–30 m/min • Operating air pressure: 0.5–0.8 MPa • Dust extraction requirement: 24,000 m³/h • Voltage: 380 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2010, Belt sander manufactured in 2010. This WEBER KSF-3-1350 features three sanding belts for high-quality fine, veneer, and high-gloss sanding. It has a constant working height of 900 mm and a continuously variable feed speed of 3-18 m/min. If you are looking to get high-quality sanding capabilities, consider the WEBER KSF-3-1350 machine we have for sale. Contact us for further details regarding this machine. Machine frame and feed • Heavy-duty welded steel construction for 3 sanding units • Constant feed height: 900 mm • Control panel and sanding belt change on the left (in feed direction) • Continuously variable feed speed: 3–18 m/min, frequency-controlled • Vacuum conveyor belt version with 5.5 kW vacuum blower and vacuum channel to the top edge of the machineUnit 1: Cross-belt unit • Pressure lamella belt with felt and graphite • ISD link pressure bar system with 11 mm workpiece detection and 44 mm pressure bar width • Workpiece-controlled sanding belt blow-off deviceUnit 2: CBF combination unit • Grooved rubber contact roller Ø 130 mm, 60 Shore • Cross-feed lamella belt with separate 4.0 kW drive • ISA link pressure beam system with 11 mm workpiece detection and 22 mm pressure width (counter-rotating) • Workpiece-controlled oscillating sanding belt blow-off deviceUnit 3: Cross-belt unit • ISD link pressure beam system with 11 mm workpiece detection and 44 mm pressure beam width • Workpiece-controlled sanding belt blow-off deviceControls and functions • Siemens MP 377 12" Multi-Panel HMI: 12" color display, program memory for 300 programs, all parameters set via program • WEBER i-Touch control with rotary knob navigation • WEBER AWDM: automatic thickness adjustment at machine inlet with start switch • Over-thickness safety roller at inlet: automatic lifting of contact roller and segmented pressure beams; feed shutdown • ISA/ISD control: high-resolution workpiece detection in 22 mm increments; free loading of complex shapes; multiple loading with minimal spacing; adjustable grinding intensity and pressure via program • ISA linkage pressure beam system (Unit 2): pressure piece movable longitudinally and transversely • ISD segmented pressure beam system (Units 1 and 3): separate adjustable edge pressure (outer edge only or outer and inner edges); selectable for longitudinal and transverse edges or longitudinal onlyTechnical data • Working width: 1350 mm • Drive unit 1 (Eco-Drive, frequency-controlled): 15.0 kW • Drive unit 2 (Eco-Drive, frequency-controlled): 20.0 kW • Drive unit 3 (Eco-Drive, frequency-controlled): 15.0 kW • CBF drive: 3.0 kW • Vacuum blower drive: 5.5 kW • Anti-rebound feed (frequency-controlled): 3.0 kW • Height adjustment drive (frequency-controlled): 0.75 kW • Sanding belt speed (frequency-controlled): approx. 3–20 m/s Dkodpfey Twwyox Anzjr • Sanding belt size (cross belts): 2 × 150 × 5100 mm • Sanding belt size (wide belt): 1370 × 2620 mm • Workpiece thickness (min/max): 4–140 mm • Working height (constant): 900 mm • Stepless feed speed: 3–18 m/min Additional equipment • Workpiece ejection device with WEBER ES system (workpiece-controlled; energy-saving; individual slide control) • WANDRES micro-cleaning, single-brush version (power sword brush with integrated micro-moistening for optimal paint dust removal)

Condition: ready for operation (used), Year of construction: 2017, product length (max.): 5,015 mm, Edge and profile sandingr manufactured in 2017. This HEESEMANN UKP 20 features a total conveyor length of 5015 mm and a feed speed range of 5-25 m/min. It includes two belt sanding units for sanding straight edges and small profiles, with electronic frequency control for speed adjustment. If you are looking to get high-quality sanding capabilities, consider the HEESEMANN UKP 20 machine we have for sale. Contact us for further details. Workpiece conveyor system • Total length: 5015 mm • Drive: 1.5 kW three-phase motor, double chain transport • Feed speed: 5–25 m/min, frequency-controlled • Working height: 880 mm (constant) • Integrated control cabinets • Adjustable stop rail with digital display and counter rail with central width adjustment • 4 side guide rollers between sanding units for safe strip transportControl Dkedpfxoy Twhxe Anzjr • Industrial PC, 10.4" LCD-TFT touchscreen • Production and downtime display • Program memory for 100 programsSanding units • 2 x belt sanding units “M4” (Positions 1 and 2) • Application: Straight edge sanding • Belt: 2300 x 80 mm • Speed: 0.7–12 m/s, stepless via electronic frequency control • Motor power: 3.0 kW • Electronic sanding pressure control from terminal • 2 x oscillation units for “M4” (Positions 1 and 2) • Purpose: Full utilization of sanding belt • 2 x belt sanding units “K4” (Positions 3 and 4) • Application: Small profile sections; chamfering • Swivel range: +90° upward / -45° downward • Belt break switch • Tool holder with quick-change mechanism • Intermittent belt feed mechanism • Belt: 2000 x 50 mm • Speed: 0.5–8 m/s, stepless via electronic frequency control • Motor power: 1.1 kW • Electronic sanding pressure control from terminalAutomation/line control • 4 electronic line controls for fully automatic timing of tool contact/lift-off based on set feed rate, sanding pressure, and unit angle

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sander (wet-type) equipped with 2 top-mounted sanding units and a brush unit (Scotch-Brite). Dkjdpfxoyn E H Ro Anzsr The machine is used for surface processing of metal parts up to 450 mm wide. The dust collection container with filter fleece is located underneath. The machine is in good, partially overhauled condition. Further technical information can be found in the documentation.

Condition: new, Year of construction: 2022, width of the strips 75 mm band length 2000 mm band speed 36 m/min total power requirement 4 kW weight of the machine ca. 82 kg dimensions of the machine ca. 1000 x 500 x 1150 mm Belt sander Metallkraft MBSM 75-240-1, article no.: 3923272 For sanding surfaces, edges and rounding off Djdox H Aliepfx Anzokr Description: - Powerful motors and vibration-free operation for the best sanding results - Quick sanding belt change in seconds thanks to quick-release system - Large surface sanding area thanks to fold-away upper sanding belt cover - Continuous sanding surface after removal of attachments enables sanding of long workpieces too - Can be used with and without extraction - One extraction nozzle on the spark box and one on the rear belt roller - Simple adjustment of the belt run via adjusting screw - Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system - Infinitely tiltable sanding unit - Fold-away protective screen

Condition: ready for operation (used), Year of construction: 2021, This SCM DMC SYSTEM belt sander was manufactured in 2021. It features a working width of 1,350 mm and belt feed speeds ranging from 2 to 16 m/min. Equipped with PRO SAND electronic control and a PLC terminal with a 10.4" LCD color display, it offers advanced user interface capabilities. The machine includes multiple working units for diverse sanding tasks and is powered by inverters for precise speed control. Contact us for more information about this machine. Additional equipment • Vacuum Motor: Powered by inverter up to 7.5 kW integrated into machine frame / Conveyor: Rubber-coated belt conveyor 50 Shore / Feed Belt Motor: 4 kW driven by inverter / Console: Integrated with PC eye-M and Maestro Pro Sand electronic control, Tele Service system, 21.5" LED LCD color display • Programs: 1999 Working Programs / Control System: Interactive troubleshooting, self-diagnosis, Full HD display with multi-touchscreen, Maestro Pro Sand software • Operating Temperature: +5 to 35°C/ Additional Features: Virtual keyboard, production report, display of electric and pneumatic diagrams, user manual. Machine Benefits Technical Machine Benefits Dsdpfoyaqg Tox Anzjkr • Working width: 1350 mm / belt feed speed: 2 to 16 m/min / control: pro sand electronic control / display: plc terminal with 10. 4" lcd color display • Sanding belt dimensions: 150 x 5000 mm / chevron belt dimensions: 140 x 4710 mm; 1370 x 2186 mm • Aggregate 1: tie 5000 working unit for extra table internal cross pad / automatic brake, linear blower, sanding belt cleaning system / aggregate 2: do19 orbiting unit for 19 rotating disc brushes / main motor: 1. 1 kw / rotating disc diameter: 125 mm / aggregate 3 & 4: bf300 working unit for brush roller / brush roller diameter: 300 mm / motor: 4 kw / aggregate 5: sc 2620 operating unit for super-finishing pad / chevron belt dimensions: 1370 x 2186 mm / sanding belt dimensions: 1370 x 2620 mm

Condition: ready for operation (used), Year of construction: 2021, This Felder FW 1102 P was manufactured in 2021. A used wide belt sander featuring a contact roller unit and a fine sanding with segmented electro-pneumatic sanding shoe. It includes a 7" touch color screen, digital grain compensation, and a vacuum table. The feed speed is variable from 2.5 to 18 m/min, sanding width of 1100 mm, and height range from 3 to 170 mm. Consider the opportunity to buy this Felder FW 1102 P belt sander. Contact us for more information. • Contact roller unit • Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width • 7" color touch screen • Digital grain compensation • Vacuum table with blower integrated in the machine stand • Infinitely variable feed speed 2.5–18 m/min (controllable from the touch screen) • Sanding width: 1100 mm • Sanding height: 3–170 mm Dodpfxex D Eyhj Anzjkr • Sanding length: 1900 mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 5,500 kg, compressed air connection: 6 bar, table length: 1,600 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 4,000 mm, workpiece length (max.): 1,500 mm, Used TIMESAVERS Model 42-Series-1600-WWB -- LIKE NEW -- For grinding and satin finishing stainless steel sheet surfaces. Wide belt sanding machine featuring two top-mounted wide belt sanding units and one brush unit. This is a dry-operating machine equipped with a Wandres production cleaning brush. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine! Technical Data: Year of manufacture: 2021 Minimum workpiece dimensions: 750 mm x 1000 mm x 2 mm Maximum workpiece dimensions: 4000 mm x 1500 mm x 6 mm Abrasive belt dimensions (W x L): 1630 x 2620 mm Table opening: 2-100 mm Adjustment accuracy: 0.01 mm Dedoq Tp H Hspfx Anzskr Flat feed belt Feed speed: 4-20 m/min Electrical: Main motor 1st unit, frequency controlled: 22 kW Main motor 2nd unit, frequency controlled: 22 kW Main motor 3rd unit, frequency controlled: 15 kW Feed motor: 3 kW Electrical connection: 400 V Frequency: 50 Hz Compressed air: Required air pressure: 6 bar Air consumption per unit: 30 l/min Wandres air consumption: 235 l/min Dust extraction PER unit: Required capacity at 125 mm water column: 10,000 m³/h Wandres brush: 600 m³/h Machine weight: 5,500 kg Extraction and/or on-site installation services can be offered upon request. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine!

Condition: good (used), surface finish Dedpfoy Ezb Hjx Anzekr

Condition: ready for operation (used), Year of construction: 1998, Machine come with equepement on picture. Dksdofa S E Ijpfx Anzsr

Condition: like new (used), Year of construction: 2020, operating hours: 28 h, functionality: fully functional, total width: 1,970 mm, total height: 2,410 mm, total length: 2,035 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 3,600 kg, grinding height: 160 mm, grinding belt speed: 18,000 mm/s, type of input current: three-phase, conveyor belt speed: 333 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, workpiece width (max.): 1,300 mm, Equipment: type plate available, Metgrid sp. z o.o. is selling an almost unused wide belt sander from the renowned manufacturer Costa. Machine specifications: - Costa MD6 CC 1350 wide belt sander - Maximum sanding width: approx. 1300 mm Dsdpfx Anjyl Svtszekr - Working thickness range: 0.8–160 mm – suitable for sanding sheets and profiles - Equipped with two sanding belts and a scotch brite brush - Comes with a full set of additional equipment: > Dust extraction system > Conveyor roller tables (custom designed and built) > Foil applicator for sheets (custom designed and built) The machine is like new, which is confirmed by a recent service report: "Technician’s service notes: Machine inspection. Operating hours: 28. Overall condition of the machine is very good, cylinders and drive belt in perfect condition. Test sanding on a stainless steel sheet – no remarks. Filter: 26 hours. Operational, with some external signs of corrosion." More photos can be provided upon request for interested parties. The sander can be viewed in Zgierz, near Łódź. For any questions, please contact by message or phone.