Used Mubea Punching Tool Ø 55 Mm for sale (108,625)

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not registered * Eligible for registration until 12/2029 * Special equipment: * Clutch-dependent but gearbox-independent auxiliary drive MB 1.65, drive flange D=150 mm * and gearbox-dependent auxiliary drive MB 131-2C * Pump located below the upper edge of the frame * Gearbox lock NMV * Twin-plate clutch * Drivetrain 44-120 t * Gearbox oil cooler * Transfer gearbox VG2800-3W/1.45-1.04 permanent * Power Shift 3, Advanced transmission * Offroad driving program * Rear-view camera * Lane keeping assist * Attention assist * Traffic sign assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * ATS warranty according to general terms and conditions, 4 years, 340,000 km * Wheelbase 4850 mm * Frame overhang 2500 mm * Axle load, front axle: 9.0 t * Exhaust muffler, vertical, behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Air tank, aluminum * Electrical pre-installation in the cab 24V / 100 A * Suspension: front springs 9.0 t, 4 leaves * Windshield tinted with band filter * Vehicle without underrun protection at the rear * Speed limiter * Gearbox 16-speed - Type: G 280-16 * Gearbox lock, gearbox-independent * Rear axle, bevel gear 300, 16.0 t * Interior filter for construction site vehicles * Fuel tank: 330 liters, aluminum, right side * Cooling capacity for hot climates * Air filter: cyclone air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive - smooth flange * Auxiliary drive, gearbox-independent and clutch-dependent MB 1.65 * Parameterizable special module * Frame overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure control system * Rear warning device, acoustic and warning lights (warning signal outside) * Key with remote control, additional (2) * Fleet management system interface * Headlight grille * Sun visor, exterior * Stabilizer on 2nd rear axle, reinforced * Steel rims 11.75x22.5 (on front axle) * Additional 24V socket in the passenger footwell * Preparation for work lights on the rear wall of the cab, top * Preparation for additional headlights * Seat belt warning device * Twin-plate clutch * Other equipment: Emission standard EURO 6e * ABS can be deactivated * Axle configuration: 8x8/4, all-wheel drive permanent * Front/approach mirrors, heated * Trailer coupling: towing coupling, Ringfeder * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above 2nd axle * Braking system, electronic (EPB) with ABS * Cockpit, multimedia * Differential lock, front axle * Air pressure connection in the cab * Air drier with condensate monitoring * Automatic switching for headlights (light sensor) * Cab: cab entrance, adjustable * Cab: tilting mechanism, hydraulic * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: steel sprung, standard * Suspension: leaf / leaf * Suspension: rear springs 2x15.0 t * Power windows * Urea tank (AdBlue): 25 liters * Sliding roof, manual (steel) * Body/superstructure: chassis for tipper * Comfort locking system * Steering pump, unregulated * Steering wheel with multifunction buttons * Steering oil cooler * Air intake behind the cab * Air compressor, 2-cylinder * Air dryer, heated * Engine 12.8 liters - 375 kW R6 Diesel (OM 471) * Engine version OM 471 * Auxiliary drive MB 131-2c Hnsdpozch I Tjfx Apyon * Type of use: local transport * Wheelbase version 4850 mm * Ramp mirrors * Waste heat utilization * Key with remote control (2) * Protection plate

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Holp Profile Bucket / PL.080.140 / OQ45-5 / 1,400 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €2,630.00 net / €3,129.70 gross - Excavator up to: 10 tons - Weight approx.: 305 kg - SAE capacity: 393 liters - Cutting width: 1,400 mm - Back width: 800 mm - Bucket made entirely of HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: Hsdpfjy T Uuvox Apyenn - No damage when rotating the bucket due to the beveled corners - Optimal design due to numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket - Advanced bucket floor for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the profile bucket provides the perfect finishing touch in a workflow: No other bucket models and profiles as precisely and brings comparable efficiency to the processing of your orders as this specially designed bucket. We have a very large selection of various Holp products in our warehouse that are immediately available! Please contact us at [phone number] for more information. Upon request, we will also be happy to provide you with a financing offer. We are the official Holp sales and service partner. We are the official Magni telescopic loader sales and service partner. We are the official Gierking GMT sales and service partner. We are the official OilQuick sales and service partner. We are the official Weber MT sales and service partner. We are the official Westtech sales and service partner. We are the official DMS sales and service partner. We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Empty weight: 305 kg Please contact Marius Herden for further information.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 7,084 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,200 mm, motor manufacturer: Vw, fork length: 1,200 mm, rear tire type: superelastic tires (black), rear tire size: SE, overall weight: 4,900 kg, total height: 2,500 mm, total length: 2,300 mm, total width: 1,930 mm, maximum load weight: 3,000 kg, fuel: liquid petroleum gas (LPG), Equipment: CE marking, adjustable boom, cabin, lighting, pallet forks, Very good condition. Hnsdpfezdtwnsx Apysn We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: like new (used), Year of construction: 2022, machine/vehicle number: P 710, functionality: fully functional, power: 5.5 kW (7.48 HP), oil tank capacity: 120 l, overall weight: 6,500 kg, control type: CNC control, Machine is in as-new condition. The High Quality Press Brake (HQPB) represents the top model of the Placke range of press brakes. The entire manufacturing process, from hydraulic cylinders to control cabinet assembly, is performed in-house. By combining state-of-the-art technology with many years of expertise in forming technology, the HQPB series enables precision bending at the highest level. Even the standard configuration provides a fully functional press brake. This package of safety, reliability and efficiency, together with user-friendly operation, allows us to meet the highest demands and tolerances in the bending process. Machine Frame: - Base machine constructed from S 355 N steel - Side supports with 2 pressure pipes and an overhead oil tank, welded - Above-floor design - Coating (2-component structured lacquer), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relief annealed - Depth of stroke measurement, reading head guided by ball bearing rails - Separate Y1 and Y2 control, electronic monitoring of parallelism Hydraulic System: - Hydraulic proportional control valve with electronically monitored cylinder synchronization - Solid steel cylinders with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, Type NSCL-II-HC, fully hardened, Maximum load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping strip, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. Mechanical crowning compensation is structurally unnecessary. - Single V-die holder (13x20) - Working height: 1050 mm (with 55 mm die height) Hjdpfxjyvzkis Apyjnn Front Side of Machine: 2 aluminum support arms at the front, approx. 600 mm long, incl. 2 flip stops, measuring tape, and plastic wear strip. The support arms are adjustable via ball guides and height-adjustable from 55 mm to 100 mm die height using a slotted adjustment. The ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge “2-axis control”: - X and R axes CNC-controlled - Z-axis manual Delem DA 66 Touch control panel on swivel arm. Safety devices in accordance with CE standard Technical Data and Working Range: Press force: 600 kN Working length: 1550 mm Distance between frames: 1200 mm Installation height: 400 mm Throat depth: 255 mm Ram stroke: 215 mm Ram Speeds: Rapid approach max. 280 mm/s Press speed max. 9.8 mm/s Return speed max. 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electronically limited to ± 5 mm Lower beam height above floor: 947 mm Motor power: 5.5 kW Main dimensions: Below-floor depth: 0 mm Pit depth for side frames: 0 mm Machine weight: approx. 6.5 t Tank capacity (hydraulic oil): 120 l (Specifications subject to change) Rear machine lighting: Work area illumination via LED light strip in the area between the side frames.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 1 h, Equipment: hydraulics, For sale is a professional bema 20 sweeping machine in absolutely top condition. The machine was purchased from the renowned specialist dealer MAUCH. Ideal for year-round use in commercial, municipal, or agricultural settings. Technical specifications: Model/Type: bema 20 / bema 20 Dual Working width: 1550 mm Sweeping roller: 520 mm with stepless sweeping roller adjustment (spindle adjustment standard in the Dual version) Bristle pattern: High-quality mixed bristle pattern (ST, SW, 3R, SB) – perfect for dirt and light snow removal. Mounting/Attachment: WEIDEMANN ZBH EF & forklift attachment (part no. 34490861) – making it extremely versatile for use on farm loaders or forklifts! Drive: Powerful, hydraulic gerotor motor (heavy-duty series, drive shaft 32 mm). Leveling: Integrated 3D roller leveling system for optimal ground adaptation and perfect sweeping results. Accessories: Includes loose hydraulic components and original bema accessories. Commercial sale by Fischer Bau GmbH. The stated price is a gross price (including 20% VAT). You will receive a proper invoice with VAT shown. Inspection possible in Weissenbach 153, 8967 Haus im Ennstal by appointment. Legal & Sales Conditions: The sale is made on behalf of Fischer Bau GmbH. Price: The stated price is a gross price (including 20% VAT). You will receive a proper invoice with VAT shown. Exclusion of liability: This offer is exclusively aimed at business customers (B2B). The sale is made with complete exclusion of any warranty, guarantee, and liability for defects. A sale to private individuals (B2C) is excluded. Hnjdpfx Apszbuqfjyon

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track Hsdpfx Aeywu Azepyonn -Manufacturer: Soco System, roller curve conveyor with drive, height adjustable -Rollers: Ø 54-80 x 355 mm -Speed: 14 m/min -Drive: 2x 0.12 kW, see photo of nameplate -Transport dimensions: 1500/600/H840 mm -Weight: 64 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 7,084 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,200 mm, motor manufacturer: Vw, fork length: 1,200 mm, rear tire type: superelastic tires (black), rear tire size: SE, overall weight: 4,900 kg, total height: 2,500 mm, total length: 2,300 mm, total width: 1,930 mm, maximum load weight: 3,000 kg, fuel: liquid petroleum gas (LPG), Equipment: CE marking, adjustable boom, cabin, lighting, pallet forks, Very good condition. Hnjdpfsy Uxkwex Apysn We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø200 x 160 mm -Item No.: 401 7184 Hjdpolvykxjfx Apyonn -Heating power: 5500 W -Voltage: 230/400V -Number: 1x heating tape available -Price per piece -Dimensions: 310/255/H160 mm -Weight: 4.0 kg

Condition: used, diameter 550 mm hollow ca. 105 mm chuck width 105 mm weight / kg Face plate four-jaw chuck Diameter: Ø550mm Hnedpfx Aeykva Tspysn Chuck width: 105mm Passage: approx. 105 mm

Condition: new, stroke: max.450daylight: max. 900motor: 22performance of pump: 48oil filling: 90messurements (LxWxH): 2500x1200x2800weight approx.: 4000max. diameter: 330pressure: 300Pressure adjustment via rotary knob Motorized control via hand lever Hodsutuyvepfx Apyenn Handwheel for laterally movable cylinder Hydraulic unit mounted on the lower side of the frame Clear opening: 2000 mm × 550 mm Cylinder travel: 500 mm from the center to both sides

Condition: new, motor power: 30performance of pump: 65oil filling: 150messurements (LxWxH): 3700x1500x3200weight approx.: ca. 5000Cylinder: Ø 400pressure: 500Pressure adjustment via rotary knob Motorized control via hand lever Handwheel for laterally movable cylinder Hydraulic unit mounted on the lower side next to the frame Clear opening: 1650 mm × 550 mm Hnjdpfoutuy Nox Apyjn

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Handover: in its current condition as inspected -Note: Check the condition of the wheels -Heavy-duty transport wagon: Industrial trailer with single-axle steering -Beam spacing: 5860 mm / Height adjustable from 850 to 1255 mm -Load capacity: 11 t -Tires: 405/130-305 solid rubber dual tires -Overall dimensions: 7600 / 2000 / H 850 mm -Weight: 1080 kg Hnsdpfxoxuqp Ae Apyon

Condition: used, Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Transfer: in the current condition as seen Hnodpfxod Sx Nde Apysn -Lid pushed in: see pictures -Air filter housing -for: filter donaldson XLP 18 2046 -Inlet / outlet: O 150/149 mm -Dimension: O 355/595 mm -Weight: 12.35 kg

Condition: good (used), Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Manufacturer: Bernardo, roller stand for hacksaw, band saw, cold circular saw -Roll height: 570 to 970 mm Hodjvm Sv Sopfx Apyenn -Roll: Ø 52 x 355 mm -Dimensions: 500/420/H570 mm -Weight: 14 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, see photos -Grindstone: 420 x 60 mm, unfortunately without type designation -Transport dimensions: Ø 420 x 87 mm Hedpfx Apow Dn Rxjyonn -Total weight: 37 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment, lathe -Handover: in the current condition as seen -Bracket: cracked, see photos -Tailstock: center height adjustable, 155 to 165 mm -Dimensions: see the drawing in the photos Hedpfxeitdiyo Apysnn -Dimensions: 430/175/H210 mm -Weight: 21.7 kg

Condition: good (used), roller conveyor, conveyor track, roller conveyor belt, roller conveyor, pallet roller conveyor -Roller conveyor: 45 sections, 39 x 2.39 m / 6 x 2.79 m -Brake roller: Distance every approx. 1.3 m -Total length: approx. 110 m -Roll width: 855 mm -Rollers: Ø 60 mm -Roller spacing: 150 mm, see photos -Dimensions: 2390/955/H90 mm / 2790/955/H90 mm -Price/Delivery: complete Hodpjv I Rc Tsfx Apyenn -Base: various heights in stock, see ID 35351 to 35358 -Transport dimensions: mm (4 pallets) -Total weight: 3357 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, thread M60 see photos -Whetstone: Dorfnerwerk type 5A 100-JOT8-UEH 400 x 30 mm -Transport dimensions: Ø 400 x 80 mm -Weight: 28.7 kg Hnedpfsw Dnt Hox Apyen

Condition: excellent (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, flat belt conveyor Hnsdpfx Aexr Apcepysn -Conveyor belt: Transport belt, stainless steel housing -Total conveyor belt width: 90 mm / 2 x 40 mm belt width -Conveyor belt length: 550 mm, dimensions see photos -Drive shaft: Ø 25 mm -Individual components: see photos -Overall dimensions: 600/500/H180 mm -Weight: 27.8 kg

Condition: used, Replacement knife for table shears, replacement blades, cutting knives, shear knives -Dimensions: 79 x 19 mm -Lengths: 2x 1055 mm Hnedpoctyq Aofx Apyen -Hole spacing: 50/238 mm -Bore: 17 mm countersunk -Price: complete -Weight: 24 kg

Condition: used, Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm Hjdpfxsk Aubqj Apysnn -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg

Condition: used, Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Cable: Ø 55 mm, length 32.5 m -Transport dimension: 1200/1000/H500 mm -Weight: 91 kg with pallet Hnedpfx Asmu Rpbopysn

Condition: used, plastic shaft, plastic material, plastic shaft, plastic shaft material, polyamide -Solid material -Diameter: 335mm -Length: 1055mm -Weight: approx. 110 kg/piece -Quantity: 9 pieces available -Price per piece -Total weight: 1120 kg Hnsdpfob Hd U Iex Apysn

Condition: used, CNC control, control panel, machining center, server cabinet -I/O Control: control panel -Dell: Desktop KXGVD -Dell: Optiplex 390 Tower -Dimensions: 505/640/H1600 mm -Weight: 72 kg Hnsdsfkq T Tjpfx Apyon

Condition: used, CNC control, control panel, machining center, server cabinet -I/O: Control panel -Dell: Desktop KXGVD -Dell: Precision T1650 Tower -with: scanner -Dimensions: 505/640/H1600 mm Hnedpfjfkq T Uex Apyon -Weight: 74 kg