Used Namega Gmbh 40L for sale (68,493)

Condition: new, functionality: fully functional, machine/vehicle number: 0681, empty load weight: 2,100 kg, maximum load weight: 16,000 kg, overall weight: 18,100 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, wheelbase: 4,000 mm, color: orange, Year of construction: 2025, Equipment: center pivot plate, The TPW 16 VL - LK has a payload capacity of 16,000 kg on the loading platform at 6 km/h. The dimensions are 5,000 mm long, 2,000 mm wide, and approximately 640 mm high. It features a turntable steering system on the front axle and a rigid trailing axle. The drawbar is equipped with a drop safety device, and the forged towing eye has a 40 mm bore. Heavy-duty banded tires 425 x 150-305 are fitted as twin wheels on steel rims and sealed on both sides with tapered roller bearings using a Nilos ring. For safety, four welded-on lashing brackets are fitted to the longitudinal sides (for load securing), and a double-acting wheel chock is mounted on the frame. The paint finish is yellow-orange RAL 2000. The transport floor is made of 30 mm tongue-and-groove boards, countersunk and bolted. Hjdpfxsrcfz Ts Aquofn

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: HAW07.5-2-22-T96, overall weight: 100 kg, total length: 600 mm, total width: 400 mm, total height: 900 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), operating pressure: 250 bar, Equipment: hydraulics, Hydraulic power packs from 1.1 to 22 KW output ⦁ Drive type electric motor - petrol engine - diesel engine or PTO driven ⦁ Hydraulic oil tank 36L - 96L - 144L - 250L or according to customer requirements ⦁ Hydraulic pump Gear pumps or axial piston pumps Hfedst U Uiajpfx Aquen ⦁ Additional components such as valves and control technology ⦁ Tank size 36L - 96L - 144L - 250L or according to customer requirements (customer drawing)

Condition: new, Year of construction: 2024, - Mobile scissor lift table with platform base frame and aluminum worktop format 1000x600mm - Operation for the up / down stroke takes place via a hydraulic foot pump - load capacity 200 kg - Construction height 400 mm - Useful stroke 610 mm - Maximum height 1010 mm - platform 1000x 600 mm - Weight approx. 35 kg - Swivel castor 2 pieces with brake, 2 pieces without brake - Wheel Ø 125 mm Hfjdpefhbvnjfx Aquon - Color gray aluminum

Condition: good (used), Used stainless steel container / transport container / IBC Last use: Chemicals Tank cleaned and with hazardous materials approval until 10/22 Item number: 10495 Volume: 500 liters Type: Standing in galvanized stacking frame Material (in contact with the medium): 1.4301 / AISI304 Design: Single-walled Bottom: Curved Top: Curved Operating pressure according to nameplate: +0.1 bar Container dimensions: Overall width: 1200 mm Overall length: 1000 mm Overall height: 1000 mm Hfodpfx Aqeflrhqeusn Materials: Inside: 1.4301 / AISI 304 Exterior parts: Galvanized steel Equipment: Nameplate: Yes Outlet diameter: approx. 70 mm Outlet type: Ball valve Outlet valve: Yes Manhole cover 400 mm with clamping ring

Condition: good (used), Converter, power supply, power supply unit Hfsdpjffwpasfx Aqujn -Manufacturer: NorthTec GmbH -Type: VCC 3 -Number: 1x available -Price: per piece -Dimensions: 440/255/H135 mm -Weight: 3.1 kg/piece

Condition: good (used), Used, insulated stainless steel tank with agitator and double jacket Last use: Food Article number: 10340 Hsdpfx Aod Nap Rsquefn Volume: Approx. 6300L Type: Standing on three legs Material (in contact with media): 1.4301 / AISI304 Design: Insulated with double jacket at the bottom Bottom: Flat bottom Top: Domed Operating pressure according to nameplate: ATM Tank dimensions: Tank diameter: 2030mm Cylindrical height: 2000mm Distance from outlet to bottom: 330mm Height of legs: 390mm Overall height: 2940mm Overall width: 2050mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Domed lid Ø 490mm Outlet diameter: 40mm Slow-speed agitator Cylinder insulated Bottom with double jacket

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1 790 58 450, turning length: 990 mm, turning diameter: 160 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1,500 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 2,400 mm, spindle motor power: 30,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 100 m/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,500 rpm, total height: 2,950 mm, total length: 5,550 mm, total width: 2,550 mm, feed length X-axis: 280 mm, feed length Y-axis: 2,400 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 100 m/min, type of input current: three-phase, torque: 191 Nm, overall weight: 16,000 kg, chuck outer diameter: 215 mm, spindle nose: A6, mount diameter: 40 mm, Equipment: documentation/manual, rotational speed infinitely variable, Manufacturer: J.G. WEISSER SÖHNE GmbH & Co. KG Type: UNIVERTOR AS90/650RT General features: Machine type: Horizontal shaft turning center with pick-up loading Area of application: Complete machining of shafts and rotationally symmetrical components Loading: Pick-up automation Processing types: Green turning, hard turning, roughing, finishing Tool carrier: 12-way turret with electric drive (VDI 40) Additional options: Driven tools, rotary turning, NC-adjustable steady rest, measuring probe Main spindle: Spindle bearing diameter: 90 mm Spindle flange: A6 according to DIN 55026 Drive power (100/40% ED): 18/23 kW or 23/30 kW Nominal speed: 1,500 rpm Maximum speed: 4,500 rpm Torque (100/40% duty cycle): 115/146 Nm or 151/191 Nm Travel paths & axes: Max. turning diameter: 160 mm Max. chuck diameter: 215 mm Center distance: Max. 990 mm Hfedpfx Ajvxf U Eequen Travel paths X/Z axis: 280 mm / 2,400 mm Max. feed force X/Z (40% duty cycle): 10 kN / 8 kN Max. travel speed X/Z: 30 m/min / 100 m/min Tailstock: Pressure force: 850 daN Centering center holder: MK4 Max. speed: 4,500 rpm Dimensions & weight: Machine dimensions (L×W×H): 5,550 × 2,550 × 2,950 mm Weight: 16,000 kg

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CO2-1125-5000, 1x Vacuum Belt Filter Completely constructed in stainless steel 1.4404/1.4571, grates in stainless steel 1.4301 Finish: pickled and passivated Including: 1x drive roller 508x1427 1x steering roller 88.9x1850 6x support/tension rollers 88.9x1850 1x VBF frame 1x VBF hood frame 1x safety grilles (1.4301) 2x spray pipes, each fitted with 12 nozzles 6x hood brackets for vacuum tube 1x mounting materials, incl. gaskets 1x holder for control valve and paddle 2x slide blocks for tension roller HMPE100 2x bearing blocks for scraper blade HMPE100 1x scraper blade HMPE100 1x drive SEW KH87/T R57 DRN90L4TF 2x bellows d100 wbz 100-E1 2x misalignment switches 2x emergency stop switches 2x emergency stop cords 1x pressure reducer 1x hose and coupling for connection to bellows Hsdexfvahspfx Aqujfn 23x nozzle holders 23x nozzles 4x rubber seals for wash cabinet 1x rubber seal for suspension conveyor 2x double wash gutters

Condition: new, Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. Type: EBB1150RWP Also available with alternative agitators and in other sizes. Volume: 1150L Hodpfew Dy D Dex Aqujfn Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm External Ø: 1390mm Total height: approx. 1300mm plus agitator drive Material: 1.4301 / AISI304 stainless steel Surface: IIIc/IIId / satin finish Internal welds ground smooth Max. operating temperature: 110°C Max. operating pressure: atmospheric - Upright design on four tubular legs with forklift channels - Top: Central traverse with two hinged covers - Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket - Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding Equipment: 1x Top traverse with two hinged cover halves, clamp function for the lid Stainless steel grating below the hinged lid, bolted and removable 1x Agitator flange on the top 1x Inlet port DN50 DIN11851 on the top 1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket 1x nameplate Propeller agitator for low-viscosity media Power: 0.75 kW Speed: 1410 rpm Operating voltage: 3PH 400V

Condition: new, Factory-new electrically heated stainless steel agitator tank EBB90RWP Including operating manual and CE declaration of conformity. The double jacket is filled with thermal oil, which is heated by an electric heating element. Alternatively available with other agitator types and in other sizes. Hsdpoym Arbefx Aquofn Volume: 97L Dimensions approx.: Ø 540mm x cylindrical height 625mm Total height: 910mm (+ agitator motor) Material: 1.4301 stainless steel (V2A) Surface: inside and outside finely ground (matte finish) Weld seams ground smooth Max. operating temperature: 110°C Operating pressure (tank): Atm - Upright design on castors - Top: folding lid, half bolted, half hinged, with removable stainless steel grating for reach-in protection - Bottom: flat base with lateral outlet DN50 DIN11851 and disc valve - Agitator flange on the top cover - 2x push handles - 1x nameplate Propeller agitator Power: 0.25 kW Speed: 980 rpm Operating voltage: 3PH 400V

Condition: new, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: Parmel_06202P&C, type of input current: three-phase, total width: 2,200 mm, input voltage: 400 V, working width: 1,600 mm, YORK Single-Sheet Cradle / Feeder The YORK single-sheet cradle features a top-twist material feeding system that allows the material to enter the automatic cutter directly, ensuring a continuous and efficient production flow. Hsdpoyh R Htefx Aqusfn Precision and Technology The YORK single-sheet cradle/ feeder is equipped with a full-color multilingual touchscreen control panel and dedicated control software for accurate and intuitive operation. The system can be electronically synchronized with virtually any automatic cutting machine, providing precise feeding control, reliable performance, and seamless integration into automated production lines.

Condition: used, KB Prüftechnik Hardness Testing Machine, Type: KB 750 BVRZ Machine Type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL Hfjdpfozg Tyuex Aquen KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (only HK 1), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic testing sequence, evaluation of the indentations on the integrated LCD monitor using an integrated video camera and zoom lens guarantees the highest evaluation accuracy according to the standard. All hardness values are displayed digitally immediately. User-friendly and powerful control panel with a color LCD monitor, high contrast and glare-free. The measurement of the indentation is performed without parallax. The testing forces are electronically controlled and applied with the highest precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with a basic equipment package that enables immediate operation with the ordered indenters. A selection of fixtures, testing tables, indenters, lenses, hardness comparison blocks, etc. is available. A connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic system. fully automatic testing sequence optical evaluation via integrated video evaluation extremely user-friendly and powerful large LCD color display industrially designed foil keypad variable software adaptation Zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED lighting Rockwell resolution 0.025 HRC extremely powerful 200 freely definable test programs Calibration machine accuracy (option) new LED ring light (option) automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Testing table ∅80 mm Motor zoom 1:7 Lens 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness indentation on the LCD display, with adjustable measuring marks, without parallax Logically structured, simple operating guidance Any number of test programs can be created and stored (200) Automatic force selection by selecting the testing method Freely selectable application times of the testing forces Freely selectable dwell times of the testing forces Online help Automatic correction for curved surfaces according to DIN EN ISO Control of the fully automatic testing sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 Table B1 Protocol generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages: German-English-French-Italian Statistics functions, such as: Number of tests Min / Max Average Range Standard deviation cp / cpk Histogram (Changes and errors in the technical data are subject to change!)

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, PAGO System L600 Pharmaceutical Labeling Machine | Extensively modernized | GMP | Immediately available Manufacturer: PAGO Etikettiersysteme GmbH (Fuji Seal) Hodpfx Aqjzpzbfeujfn Model: System L600 Year of manufacture: 2013 For sale is a high-quality PAGO System L600 labeling machine for the pharmaceutical industry. The machine is suitable for labeling vials, injection bottles, and other cylindrical containers in a GMP environment. The machine was already upgraded and modernized at the factory in 2018 to handle additional product formats. In 2022, we purchased the machine used and immediately took it to the manufacturer, Fuji Seal / PAGO Germany. There, it was completely inspected, serviced, and extensively modernized. Investments of €60,200 were made in these measures. Before delivery, a complete Factory Acceptance Test (FAT) was carried out at the Fuji Seal factory. The machine is in very good technical condition and is ready for immediate use. Equipment Laetus/Keyence vision system for print and code inspection New Allen / Novexx thermal transfer printer Siemens PLC control Touchscreen operation Unwinding station Outfeed station Servo drives Stainless steel GMP design Complete protective enclosure Original documentation Technical data Output up to 120 products/min For vials and injection bottles GMP-compliant design Year of manufacture 2013 Manufacturer: PAGO Etikettiersysteme GmbH Why is the machine being sold? For our new pharmaceutical CMO plant, we have purchased two new labeling machines. Due to space limitations, this machine is no longer needed. Advantages Extensive modernization by Fuji Seal / PAGO Documented investment of €60,200 Factory upgrade already in 2018 Complete FAT at the manufacturer Very well-maintained condition Immediately available Significantly cheaper than a new machine A comparable PAGO/Fuji Seal pharmaceutical labeling machine costs over €450,000 in 2026, depending on the equipment and automation. Inspection is possible at any time by appointment. We will gladly send you further photos, videos, and technical documentation upon request.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,550 mm, total height: 2,050 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Hfodpfxszntfmj Aqusn Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: good (used), Year of construction: 2022, functionality: fully functional, overall weight: 125 kg, input voltage: 230 V, total length: 1,500 mm, total height: 1,000 mm, total width: 700 mm, Equipment: documentation/manual, Siemens S7 PLC training and testing system AP2, electronics technician for automation technology – conveyor system Manufacturer: Stepp Fabrikautomation GmbH & Co. KG Year of manufacture: 2022 Control system: Siemens S7 PLC Description: For sale is a complete, professionally manufactured training and testing system for training in the field of electronics/automation technology. The system was manufactured by Stepp Fabrikautomation GmbH & Co. KG as a special machine and is used for the practical execution of tasks for the final examination, part 2 (AP2), for electronics technicians for automation technology. The module enables the complete execution of an automation task, from electrical wiring to PLC programming, commissioning, and troubleshooting. Technical equipment: Siemens S7 PLC control system Complete control cabinet with industrial wiring Voltage supply and protection technology Input/output circuitry Control of a conveyor system Motor drive with power unit Sensors and actuators Operating and signaling elements Terminal and documentation system Areas of application: Training for electronics technicians for automation technology Hfedpfx Aqjzp Iqmouen AP2 examination preparation Vocational schools and technical training centers In-house training and further education Advantages: Industrial design based on special machine construction Not a simple training system, but a practice-oriented machine design Realistic simulation of an automation task Ready for immediate use Ideal for training apprentices Condition: Very good condition, year of manufacture 2022, fully functional. Scope of delivery: Complete testing/training module Control cabinet Conveyor system PLC control system Existing documentation

Condition: used, Year of construction: 1991, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 44361 l Hfedpfx Aqsztya Usujn Operating pressure: 0,9 bar Operating temperature: 20 °C Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: insulated, covered, 1 cooling zone (183 l, 0.9 bar), manhole, safety valve, CIP pipe with spray head, manometer, yeast plug Periphery: own temperature control

Condition: used, Year of construction: 1986, A vertical stainless steel tank with multiple cooling zones and various fittings. Most recently used as a fermentation tank for beer. Additional title: Coolable tank Capacity approx.: 11600 l Width: approx. 2,3 m Height: approx. 4,1 m Material: Stainless steel Position: vertical Hjdpfozty E Rox Aquofn Base construction: on 4 feets Features: manhole; cooling jackets; spunging apparatus; sampling valve

Year of construction: 1990, condition: used, Capacity: 250 hl/h Hfjdpfx Aqezty Hnjujn Pressure: 16 bar Length: 3.000 mm Width: 750 mm Height: 2.246 mm Weight: 3150 kg Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN Base construction: clamping screw cap NIRO pedestal Features: 4-stages (heater, hot holding section, regenerative heat exchanger, pressure reduction), connections: DN65

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which Hsdpfx Aqszt Ip Rsuofn can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995.

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Hodpfx Aqjkh Hbpsusfn Model: NWR35 Ricardo Motor Newpower generator generator set Continuous power: 24 kW / 30 kVA Maximum power: 26kW / 33kVA Engine : Kofo RIcardo N4100DS-30, 4 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz. Voltage: 400/230 V including mechanical speed control, AVR, battery charger, galvanized soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 2180x960x1260 mm Weight: approx. 900kg Diesel tank: 102 L. At 100% load: 7.15 L/h At 75% load : 5.8 L/h At 50% load : 3.7 L/h Mains monitoring, mains feed, soundproofed Ready for immediate use. Net price: €5,208, gross price: €6,197 additional costs 63A automatic switch: € 500 100A automatic switch: € 620 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address -Available from April

Condition: ready for operation (used), Year of construction: 2019, fting height: 3000mm, rated load capacity: 7t, load center: 600mm, weight: 11,29t, operating hours: approx. 3000h, with 360° rotator and air conditioning, the rear axle is defective (mounting pin and wheel hub). An on-site inspection is possible. Hodpfx Aqozuktbsuefn

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Hfsdpfsnxk Ixox Aqusn

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! Hodpfx Aqjuggb Deujfn As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: as good as new (ex-display), Year of construction: 2021, - Mobile scissor lift table with a single-scissor mechanism Hfsdpfx Aofnnayequon - With a smooth metal sheet platform, WITHOUT a sliding bar - The lifting mechanism (up/down) is operated via a hydraulic foot pump - Load capacity: 1200 kg - Overall height: 450 mm - Lifting height: 700 mm - Maximum height: 1150 mm - Platform size: 2000 mm x 1000 mm - Weight: 420 kg - 2 swivel casters with brakes, 2 fixed casters without brakes - Wheel diameter: 150 mm - Powder-coated finish: base frame and platform frame in light gray RAL 7035, scissors in violet-blue RAL 5000

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71 Hfsdpeud N Hdofx Aqujn  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.