Used Pulp Bale Clamp for sale (9,535)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Guedpfx Aqozp H R Eoisf Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Technical details: length: 1200 mm Gsdpfx Aqjvfduwoisuf width: 500 mm height: 1260 mm

Condition: used, functionality: fully functional, Year of construction: 1999, load capacity: 2,900 kg, Clamp fork Guodjzt Drhjpfx Aqijf Condition (Technical): normal Description: German: KAUP clamp fork 1T453 No.: R0812 Year of manufacture: 1999 Manufacturer: KAUP Type: 1T453 Load capacity: 2,900 kg Load center: 500 mm Center of gravity: 340 mm Load center distance: 291 mm Weight: 1,085 kg Max. hydraulic pressure: 160 bar Serial number: 9003608 The KAUP clamp fork is a hydraulic attachment for forklifts, enabling both the normal lifting of loads via the fork tines and the lateral clamping of suitable goods. The attachment is in used condition, with cosmetic wear commensurate with its age. A thorough technical inspection and a check of compatibility with the respective forklift should be carried out before use. Fast and straightforward transport is possible upon request! This advertisement serves solely to identify the attachment. A detailed description of the condition and possible equipment is provided individually upon request. Subject to errors and prior sale. Sale only to commercial businesses. All sales of used equipment are made without warranty or guarantee. If you have not found the right attachment, please contact us. We have a large selection of other equipment and attachments available on site. English: KAUP Clamp Fork 1T453 No.: R0812 Year of manufacture: 1999 Manufacturer: KAUP Type: 1T453 Capacity: 2,900 kg Load centre: 500 mm Centre of gravity: 340 mm Lost load centre: 291 mm Weight: 1,085 kg Max. hydraulic pressure: 160 bar Serial number: 9003608 The KAUP clamp fork is a hydraulic forklift attachment and can be used both for conventional handling with the forks and for clamping suitable loads from the sides. The attachment is in used, age-related visual condition. A detailed technical inspection and verification of compatibility with the respective forklift should be carried out before use. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the attachment. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right attachment, please contact us. We have a large selection of additional equipment and attachments available on site.

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Gusdpezqr Nisfx Aqijf Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Year of construction: 2021, operating hours: 450 h, functionality: fully functional, Vertical Baler HSM V-Press 860 plus, Year of Manufacture: 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of Manufacture: 2021 Operating Hours: 450 Pressing Force: 60 t Drive Power: 4 kW Feed Opening: 1195 x 645 mm Filling Height: 1114 mm Bale Size: approx. 1200 x 1200 x 780 mm Bale Weight: 480 kg Binding: manual Theoretical Cycle Time (idle): 25 s Theoretical Throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, Paper, Cardboard Comment: The baler is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We accept no liability for the accuracy of the information provided or for any possible errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Gujdpjzqr Irjfx Aqiof Sale is ex location, without warranty or guarantee. Our payment condition is 100% advance payment.

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Gujdpfxozh Eztj Aqisf Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 x 65 cm Condition: very good! Video of the machine in operation available on request. Transport also possible.

Condition: used, Year of construction: 2018, Avermann baling press, type AVOS 1810 BRK-90/100, year of manufacture 2018, cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of the feed hopper: 1,800 x 1,000 mm Throughput capacity at 35 kg/m³: 15.0 t/h Throughput capacity at 60 kg/m³: 20.0 t/h Throughput capacity at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, depending on the material Tying: 5-fold vertical, 3-fold horizontal, automatic Guedpfx Aszqc Ngoqijf Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Clamping angle, clamping aid Gjdpfx Aqjzn I U Aeieuf -Clamping angle: for workpiece clamping -Groove: 100 x 36 mm -Dimensions: 250/160/H280 mm -Weight: 11 kg

Condition: good (used), Clamping angle, clamping aid Godjzn I Upjpfx Aqieuf -Clamping angle: for workpiece clamping -Groove: 100 x 36 mm -Dimensions: 250/180/H280 mm -Weight: 10.7 kg

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove width 27 mm -Number: 3x mounting brackets available -Price: per piece Godpszn I S Usfx Aqieuf -Dimensions: 280/250/H290 mm -Weight: 13.5 kg/pc.

Condition: good (used), Clamping angle, clamping aid Gedpozn I Nysfx Aqiouf -Clamping angle: for workpiece clamping -Groove width 27 mm -Dimensions: 280/250/H320 mm -Weight: 13 kg

Condition: good (used), Clamping angle, clamping aid Gsdpfx Ajzn I Nmjqiouf -Clamping angle: for workpiece clamping -Wall thickness: 36 mm -Groove: 72x22 mm -Dimensions: 370/205/H240 mm -Weight: 32.6 kg

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 30 mm -Groove: 45x24 mm / 34x18 mm Godpszn I E Uofx Aqiouf -Dimensions: 270/145/H200 mm -Weight: 15.5 kg

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp -Manufacturer: Ganter, Aluminum Foot Clamp Godpfsznu Szox Aqieuf -Type: GN 473 B12 -Number: 35x holders available -Price: per piece, minimum order 3 pieces -Dimensions: 38/35/H25 mm -Weight: 0.033 kg/pc.

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp, foot clamp holder -Manufacturer: Ganter, Aluminum Foot Clamp -Type: GN 473 B20 -Number: 28x holders available Godpfx Aqsznu Snoieuf -Price: per piece, minimum order 2 pieces -Dimensions: 50/44/H35 mm -Weight: 0.076 kg/pc.

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp -Manufacturer: Rose Krieger, 4 pieces cross clamp connectors, aluminum cross clamp, round tubes -Type: Size 50/25 mm -Submission/Price: complete -Dimensions: 135/65/H65 mm -Weight: 0.6 kg/pc. Gusdoznu Agspfx Aqiof

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece -Manufacturer: Rose Krieger, Flange clamp pipe connector flange, aluminum, one-piece for round tubes -Type: Size 12 mm -Number: 11x holders available -Price: per piece, minimum order 2 pieces -Dimensions: 50/35/H41 mm -Weight: 0.1 kg/pc. Gujdpsznt Disfx Aqief

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, overall weight: 300 kg, LANG Clamping Tower 70850 with Grid Plates 75710 Godpfx Aqeztzi Reieuf 2 towers with plates are available! We are offering a high-quality LANG Clamping Tower 70850 with matching Grid Plates 75710. This clamping system is ideally suited for precise and efficient 5-axis machining as well as multi-sided machining on CNC machining centers. Technical Data: Manufacturer: LANG Technik Type: Clamping Tower 70850 Accessories: 8 x Grid Plate 75710 Clamping system with grid hole pattern High repeatability Robust design for industrial use Ideal for automated manufacturing and setup time optimization Condition: Used, technically flawless. Normal signs of wear and tear consistent with age and application. Scope of supply: 1 x LANG Clamping Tower 70850 8 x LANG Grid Plates 75710 The clamping tower enables optimal utilization of the machine's working area and increases productivity by machining multiple workpieces in a single setup. Inspection possible by arrangement. Shipping or collection by agreement.

Condition: new, Year of construction: 2014, operating hours: 46 h, load capacity: 300 kg, lifting height: 1,850 mm, fuel type: electric, mast type: duplex, construction height: 1,500 mm, Manufacturer + model: LINDE L 16 (372) Gujdpfx Aqezq T Rbeisf Mast: 2W1850 + KAUP / Drum clamp ID: 23032.5921 Category: Demo Mast: 2W1850 Lowered height: 1500 mm Lifting height: 1850 mm Year: 2014 Hours: 46 Capacity: 24 V / 345 Ah Options: Equipped with a SELF-SUPPORTING drum clamp -> KAUP 0.8 R405 Drum clamp reach = 450 to 850 mm

Condition: excellent (used), Year of construction: 2011, Ref: 11100 . 2011 Duplo DPB-500 EVA Perfect Binder Excellent condition! Only 40,000 books on the counter! Single clamp solo binder designed for the digital book-on-demand market with operation by one person. Features: • EVA spine glue unit • Programmable pre-melter • Computerised set-up with icon based touch-screen • Automatic setting of clamp book thickness and cover scoring Guedpfxoy Nzcle Aqief • Double/Out of cover detector • Light beam score positioning • Milling & roughing unit with dust bag extraction • Internal vertical stacking tray delivery Specification: Book thickness: Min 1mm / Max 51mm + cover thickness Book size (spine × fore-edge): Max 360mm × 320mm Min 120 × 120mm Cover size: Max 360 × 696mm / Min 120 × 250mm Cover weight: 80-302gsm Cover Pile height: 70mm Mechanical speed: Max: 525 /hour

Condition: used, Two FAG H2312 clamping sleeves with KM12 slotted nuts Gedpfszrxv Ssx Aqisuf Technical data: - Condition: As new

Condition: used, d1 = 35 mm d2 = 27 mm (spanner width) Godozrxqpepfx Aqiouf Technical data: - Overall length: 195 mm

Condition: used, M40 x 1 Guedpfxezrxp Es Aqisf 5 Right-hand thread Technical data: - Available: 5

Condition: used, d1 = 30 mm d2 = 27 mm (spanner width) Godpfezrxpxox Aqisuf Technical data: - Total length: 215 mm - Available: 2

Condition: used, d1 = 35 mm d2 = 27 mm (spanner width) Technical data: - Total length: 115 mm Guodpfozrxn Usx Aqief - Available: 3