Used Rampf Mc-Easy for sale (6,788)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: Lrodpfxjykty Do Adtok -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Condition: new, *AVAILABLE IMMEDIATELY* with steel sheet walls, 4x support legs Special price for demonstration stock vehicle from 2023 – No initial registration!! Technical data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 2000 kg • Unladen weight: approx. 661 kg • Payload: approx. 1,339 kg • Internal dimensions: 288 x 194 x 200 cm (L x W x H) • Overall external dimensions: 447 x 250 x 256 cm (L x W x H) • Loading edge height: approx. 52 cm • Tyres: 13-inch alloy wheels • Brakes: Yes • Jockey wheel: Yes • 100 km/h approval: optional at extra cost • Vehicle documents included Equipment: • Robust V-drawbar, fully hot-dip galvanized • KNOTT overrun brake system • 18 mm thick floor plate • Reinforced steel sheet side walls and roof • Rear double-wing doors • Lever lock on rear doors • 6 tie-down rings on the floor • Jockey wheel • Auto-reversing system • Plastic mudguards • 13-pin connector • Reverse light • Large-size safety lighting • Integrated rear fog light • Body: splash-water protected • Registration documents: ZBII & COC papers Lodpfx Adjyyw Iretsrk Optional accessories (available on request): • Anti-theft device • Lashing straps • Additional lashing eyes • Slat rails with rubber coating for lashing straps & load bars • Load bars in steel or aluminium • Interior lighting • Reversing light • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - Vehicle registration document dispatch in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! For over 30 years: specialist dealer and service workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Errors, omissions and prior sale excepted -

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 212 h, load capacity: 3,000 kg, lifting height: 4,300 mm, free lift: 1,585 mm, fuel type: diesel, mast type: triplex, construction height: 2,338 mm, fork carriage width: 1,260 mm, empty load weight: 4,440 kg, drive type: Diesel, construction width: 1,450 mm, Rough Terrain Forklift Load Center: 500 Mast Type: Triplex Technical Condition: New Front Tire Size: Solidal 12 SL R4 Off-road Tread GESA Front Tire Condition: 80 - 100% Rear Tire Size: Solidal XTra 27x10-12 SKS Off-road Tread GES Rear Tire Condition: 80 - 100% Battery Voltage: 12V Lodswqtyfepfx Adtsrk Load Backrest, 3rd Valve, 4th Valve, Heater, Full Cabin, CE Certificate, Image may be a sample photo Paddle 100x45x1200 mm Exterior Mirrors Left and Right, Mechanically Suspended Plastic Seat, Road Lighting Halogen Front/Rear, Reinforced Battery Capacity 12V 110AH 750A, Radiator Metal Protective Grid, Ecostop, Raised Vertical Exhaust on Counterweight, Load Cushioning, Load Backrest Width 1260 mm LB1260, Mast Tilt 1210 Forward/Back, Rear Mud Flaps Rubber, Easy Link STD Module, Front Fender Extensions Metal, Total Width 1400 mm MI

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 50 h, load capacity: 25,000 kg, lifting height: 2,600 mm, free lift: 1,100 mm, fuel type: electric, mast type: duplex, construction height: 2,900 mm, fork carriage width: 1,800 mm, fork length: 2,400 mm, empty load weight: 25,000 kg, total length: 4,120 mm, drive type: Elektro, construction width: 1,800 mm, Heavy-duty forklift - Electric Load center: 900 Fork width: 1800 mm Fork thickness: 100 mm ISO class: Pin-Type Lredpfxjwwyx Is Adtok Mast type: Duplex Condition: As new Technical condition: Very good Hydraulic fork positioner, cabin, joystick control, remote control

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 225 mm, turning diameter: 260 mm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 5,000 rpm, quill diameter: 60 mm, quill stroke: 80 mm, ATTENTION: A total of 3 machines available. There are 2 additional identical machines with the same equipment (chip conveyor, etc.). EQUIPMENT - Chip conveyor for side mounting and chip bin - Short bar loader magazine - Interface for bar feeder device - Workpiece catch tray (parts catcher) - Chuck confirmation switch (open/close) - C-axis indexing - Driven tools - Programmable tailstock - Linear guides - Manuals Control: Fanuc 0i-TD Control power-on hours: 30,811 h Machining time: 7,738 h Spindle motor power: 15/7.5 kW Feed motor power X/Z-axis: 3.0/1.8 kW Ledpsyzggmsfx Adtjrk Milling spindle motor power: 3.7/2.2 kW Max. turning diameter: 260 mm Max. turning length: 225 mm Chuck size: 6" Swing diameter over bed: 550 mm X-axis travel: 170 mm Z-axis travel: 335 mm Rapid traverse X/Z-axis: 36 m/min Main spindle Spindle nose (ASA): A2-5 Max. spindle speed: 6,000 rpm Spindle bore diameter: 56 mm Max. bar capacity diameter: 45 mm Turret Number of turret stations: 12 positions Turret indexing time: 0.15 s Tailstock Quill diameter: 60 mm Quill stroke: 80 mm Taper bore/tailstock mounting: MT 4 Milling Spindle Max. spindle speed: 5,000 rpm Bar feeder magazine Model: Fedek Machine Co. DH-65 Bar length min./max.: 280/1,200 mm Bar diameter: 5-65 mm Dimensions Dimensions (L x W x H): approx. 1,620 × 1,200 x 1,400 mm

Condition: ready for operation (used), Year of construction: 2002, operating hours: 57,752 h, clamping force: 13,000 kN, screw diameter: 105 mm, overall weight: 83,000 kg, Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It includes a hydraulic mechanical 2 platen clamping system and a robust motor current of 261 A. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1300-12000 MC machine we have for sale. Contact us for further details. • International size designation: 12000 MC / 1300 • Operating hours: 57,752 hElectrical • Operating voltage: 400 V, 3-phase, 50 Hz (400/230 V European standard) • Motor current: 261 A • Heating current: 239 A • Motor total current: 245 A • Motor fuse: 315 A • Heating fuse: 250 A • Main switch: 6-pole, heating and power separated • Sockets: Service socket Schuko 10 A; 3x Schuko 16 A; 2x CEE 16 A; 2x CEE 32 A • Oil cooled pump motor: IP54 • Cabinet cooling fanControl and HMI • MC4 32-bit microprocessor control • TFT color display • 3.5 inch floppy disk driveClamping unit • Hydraulic mechanical 2-platen clamping system • 4 pressure cushions integrated in moving platen • Hydraulic central ejector • Hydraulic core pull control • Hydraulic safety door on operator side • Minimum mould height: 700 mm • Maximum mould height: 1400 mm • Maximum opening stroke: 2250 mm • Maximum daylight opening: 2950 mmInjection and plasticizing • PV controlled injection unit • Thermoplastic plasticizing unit, wear-resistant design • Non-return valve installed • Open nozzle design • Nozzle radius: 15 mm; nozzle bore diameter: 4 mm • Hydraulic screw drive with constant motor • Parallel plasticizing possible • Plasticizing unit: SP12000 • Maximum processing temperature: 450°C • Injection embossing control adjustable on screen • Injection stroke control • Holding pressure control • Injection speed controlHydraulics, lubrication, cooling • Regenerative pump control system • Internal oil filtration system • Oil monitoring system • Oil cooler for water supply: max 31°C • Cooling water pressure: 4–6 barTemperature control • 8 temperature control circuits for hot runner • Adaptive temperature controllers • Maximum temperature controller power: 2 kW • 230 V temperature controller supplyMonitoring and software • Quality monitoring package • Process monitoring system • Tolerance band monitoring • Cycle analysis display • Cycle data storage up to 20,000 cycles • Event log protocol • Alarm history • Graphical process curves • Trend graphics for 12 parametersInterfaces and connectivity • RS232 interface • Ethernet interface TCP/IP • Euromap 12 interface Lredpfxeyx Ez Ro Adtek • Euromap 63 / SPI software support • External temperature unit interface 20 mA • Central computer interface • BDE interface with 5 contacts • Potential-free contact for dosing unit

Condition: excellent (used), travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,200 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,200 kg, Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake  Lrsdpeyucc Nefx Adtjk   X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,220 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, table load: 300 kg, overall weight: 2,200 kg, CNC milling machine Lrjdpfx Aoyub Udedtjk EMCO - FB 450 MC MACH-ID 9401 Make: EMCO Type: FB 450 MC Control: Siemens 828D ShopTurn Year: 2019 Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Lodpfsvtcviox Adtork Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,459 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: 18i, number of axes: 4, This 4-axis EMCO MC 120-60 vertical machining centre was manufactured in 2008. It features an X-axis travel of 1200 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a Fanuc 18i control unit and a tool magazine with 30 stations. It includes a Lang Eco Compact clamping system. If you are looking to get high-quality machining capabilities, consider the EMCO MC 120-60 machine we have for sale. Contact us for further details. • Quantity: 2 machines (offered together) • Price: 30,000 € for both machines • 4th axis: Yes, mounted • Tool magazine: 30 stations Additional equipment • Chip conveyor • Band filter • Automation: Lang Eco Compact 10 (fully functional) • Tool holder package SK40 • 10 vices • Custom-made wooden floor grating for ergonomic loading Lodpfx Adeyxnmvotsrk Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2001, x-travel 660 mm y-travel 460 mm z-travel 500 mm table dimensions 940 x 460 mm Control Yasnac J300 spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Lrjdpfoxxmmrex Adtsk Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2006, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, transport trailer, refuse transport trailer -Manufacturer: Franke, transport trailer low loader, refuse transport trailer type TA-MC -Platform: Length 2750 mm, dimensions see photos / technical drawing -Load capacity: 1200 kg -Maximum speed: 25 km/h Lrjdpfxel Dvtke Adtok -Number: 2 trailers available -Price: per piece -Transport dimensions: 5100/1735/H1740 mm -Empty weight: 840 kg/unit

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Lsdpfx Aswu Ackjdtjrk Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3

Condition: new, total length: 6,430 mm, Year of construction: 2026, load capacity: 15,000 kg, Crane JMG MC 100.08 Drive Electric Year built 2026 Lodpfjyy Dghex Adtjrk Lifting weight (kg) 15,000

Condition: good (used), Year of construction: 2022, functionality: fully functional, Niles N 30 MC - 4500 turning-milling center, year of manufacture 2022, Siemens SI 840 D SL control system, travel X/Z 4756/725 mm, Y-axis +/- 250 mm, B-axis swivel range -105° / +95°, B-axis spindle speed up to 5,000 rpm, C-axis main spindle 0.001°, spindle speed up to 3,000 rpm, tailstock, steady rest, 144-position tool magazine, workpiece measurement, gear hobbing software. Ljdpfjyzd Riox Adterk

Condition: good (used), Year of construction: 2019, functionality: fully functional, Niles N 40 MC - 6000 Turning/Milling Center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y axis -200 / +400 mm, B axis 0.001°, B axis swivel range -105° / +95°, tool changer with 192 positions, C axis main spindle 0.001°, spindle speed up to 1750 rpm, 2 gear stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Lrjdsyzd Rcjpfx Adtok

Condition: good (used), functionality: fully functional, tank capacity: 250 l, total length: 1,600 mm, total width: 1,100 mm, total height: 1,150 mm, wall material: stainless steel, power: 45 kW (61.18 HP), input voltage: 400 V, input frequency: 50 Hz, Product number: 0021861 Lrodpeyv Anisfx Adtok Brand: Jøni Foodline Model: Easy Product category: Cooking kettles Capacity: 250 liters Length: 1600 mm Width: 1100 mm Height: 1150 mm Connection voltage (V): 400 Power (W): 45000

Condition: used, total length: 4,670 mm, Year of construction: 2024, load capacity: 10,000 kg, · Funkfernbedienung für alle Kran- und Auslegerbewegungen. Falls vorhanden auch mit Bewegungen von hydraulischen Anbauteilen · Vorderachse Antrieb mit gegenläufiger Bewegung · Abnehmbare Kontergewichte · Proportional ausfahrbarer hydraulischer Ausleger · Leistung: Vorderradantrieb: Nr. 2 Elektromotoren AC 7,5 kW, 80V. Isolationsklasse H · Batterie: 80 V - 810 Ah, 8 Arbeitsstunden · Reifen: Vorne: Nr.2 superelastich 355-15”, Hinten: Nr.2 superelastich 250-15” · Lenkung: über die Hinterachse, Lenkwinkel 90°/90° · Elektronische Lastbegrenzung · Automatisches Bremssystem an allen Rädern · Hergestellt aus vorgefertigten und verschweißten Stahlplatten · Auslegerwinkel +65°/-10° Lrsdeyyq Raepfx Adtjk · Elektromotor 16 kW - 80 V AC, Isolationsklasse

Year of construction: 1990, condition: used, table mounting size: 700 x 1200 mm Lodsda S Nvopfx Adterk movements x/y/z: 600/300/350 mm spindle taper: SK 40 ISA min./max. distance table/spindle: 150/540 mm spindle turning speed range: 45 - 6000 rpm number of tool positions: 12 pieces carriages: 5000 - 20000 mm/min rapid move: 5000 - 20000 m/min spindle drive: 5,5 kW electrical connection: 380 V, 12 kVA kW space needed: 2350 x 2100 x 2500 mm weight: 3800 kg

Condition: reconditioned (used), Year of construction: 2017, operating hours: 12,270 h, functionality: fully functional, turning diameter: 150 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 220 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, overall weight: 5,700 kg, spindle nose: JIS A2-5, input voltage: 400 V, number of driven tool stations in tool turret 1: 10, number of tool stations in tool turret 2: 10, CNC Lathe DMG MORI NRX2000 MC TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 CNC control: MITSUBISHI M730UM Max. turning diameter: 150 [mm] Stroke X axis: 100 [mm] Stroke Z axis: 220 [mm] Rapid traverse rate X1 axis: 30000 [mm/min] Rapid traverse rate X2 axis: 30000 [mm/min] Rapid traverse rate Z1 axis: 30000 [mm/min] Rapid traverse rate Z2 axis: 30000 [mm/min] Spindle nose: JIS A2-5 Max. machining length spindle 1: 100 [mm] Max. machining length spindle 2: 100 [mm] Max. spindle speed - Spindle 1: 6000 [rpm] Max. spindle speed - Spindle 2: 6000 [rpm] Live tools power - Turret 1: 1.5 [kW] Live tools power - Turret 2: 1.2 [kW] Number of tool stations - Turret 1: 10 Max. speed driven tools - Turret 1: 10000 [rpm] Number of tool stations - Turret 2: 10 Max. speed driven tools - Turret 2: 10000 [rpm] Total power required: 38 [kVA] Supply voltage: 400 [V] Working hours: 12270 [h] Weight: 5700 [Kg] INCLUDED EQUIPMENT: x1 gantry loader x2 workstockers (left + right) for raw materials and finished workpieces Ljdpjyzgc Uofx Adtork x1 RENISHAW workpiece touch probe, type RLP40 (NEW) x1 drill bit breakage detection sensor (for turret N°1) x19 static tool holders x4 axial driven tool holders x2 KITAGAWA collet chucks, type KLAMP DKF65 x2 three-jaw chucks x1 status indicator lamp x1 coolant gun x2 remote electronic handwheels (Jogwheels) x1 oil mist extraction unit x1 chip conveyor x1 high-pressure coolant unit, 35 [bar] x1 SIEBEC cutting fluid filtration unit type MP52D-AP18 x1 set of grippers for the gantry loader x1 set of axle clamping brackets for machine transport x1 complete set of manuals (users manual, programming manual, electrical diagrams, gantry loader manual...) Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to a mill-turn center, machining center, and milling machine, and to brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG, Mazak. CNC lathe, NC lathe, digital lathe, machining center, NC milling machine, CNC milling machine, digital milling machine, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,848 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis EMCO MC 75-50 was manufactured in 2008. It features an X-axis travel of 750 mm and Y-axis travel of 500 mm, providing versatile machining capabilities. The machine is equipped with a Heidenhain iTNC 530 control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the EMCO MC 75-50 vertical machining centre we have for sale. Contact us for further details. • Axes: 4 (standard) + optional 5th axis • Spindle: Kessler • Operating hours: Control ON 36,839 h; Machine ON 21,370 h; Program run 11,122 h; Spindle ON 9,848 h • Electrical: 400 V, 3 phases, 50 Hz, nominal current 50 A, largest load current 30 A, breaking capacity 16 kA • Protection grade: IP54 • Electrical cabinet weight: 220 kg • Cooling: Coolant system with belt filter (MicroMag filtration unit visible) Additional equipment • Chip conveyor • Wired electronic handwheel • Lehmann rotary axis with rocker and counter bearing • Zeroclamp zero-point clamping system • Retrofitted electrical cabinet cooling unit (Rittal) • Nikken rotary table Lredpfx Adjywyq Djtsk Technical Specification Taper Size SK 40

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy Ljdped Iipxefx Adtjrk - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 940 mm total power requirement 1,5 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable Ljdpfxofgyiao Adtjrk - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts Lsdpfjfgyicjx Adtsrk 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, cutting diameter 255 mm saw band length 2765x 0,9 x 27 mm cutting width 300 x 180 mm turning speeds 35 + 70 U/min total power requirement 1,8 kW weight of the machine ca. 450 t dimensions of the machine ca. 1,7 x 1,23 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off Lsdpfx Adsfn Andetsrk 5. Raise the frame to just above the material 6. Open the vise