Used Retractable Liquid Paint Booths for sale (6,877)

Year of construction: 2026, condition: new, 🏭 POWDER COATING BOOTH KPH Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ Ndedpfxsfz Atbj Ah Sec 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). Nedpfx Ajfz A H Doh Ssdc - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. Nedefz U Tiepfx Ah Sedc History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Nodeflk Awjpfx Ah Sodc ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Nedpfx Asflq Spoh Sodc Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Condition: new, 1 brand-new hydraulic press brake with 2-axis NC positioning control, make ELGO P 40 Make: LAMI NOVA, Origin China Model: P 2600 Exclusive representation! Technical data: Pressure capacity 100 t Folding length 2600 mm Clearance between the uprights 2050 mm Projection 320 mm Installation height 405 mm Stroke 140 mm Feed speed 60 mm/s Working speed 7.5 mm/s Retraction speed 55 mm/s Drive power 7.5 kW Dimensions L x W x H 3050 x 1650 x 2520 mm Ndedpfx Aor Hby Heh Sjc Weight 6200 kg Accessories / special features: - 2-axis NC positioning control, make ELGO P 40 for motorized plunge depth and backgauge plunging depth and the back gauge - PM 1 upper tool, consisting of 3 x 835 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 60 x 60 mm with several V-openings - Back gauge with ball screws, length approx. 600 mm - Front support arms - Foot pedal with EMERGENCY STOP - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL - Electrical system SCHNEIDER - Operating instructions - CE-compliant Delivery time: approx. 8-10 weeks, after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 380 V, temperature: 250 °C, heating capacity: 18 kW (24.47 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 800 mm, filter area: 22 m², energy consumption: 22 kWh, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for an individual shipping quote. ✅ Complete Package for Professional Powder Coating ✅ Brand new, unused industrial products ✅ Proton Maschinenbau GmbH is the exclusive authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also inquire about current stock availability. 🔥 PROMOTION ONLY UNTIL 06.06.2026 🔥 Package list price (net): €19,570.00 Promotional discount: 15% = €2,935.50 ➖➖➖➖➖ ⭐ Mini Powder Coating System – MINIPBMAT-2-S COMPLETE STARTER KIT FOR PROFESSIONAL POWDER COATING! With the MINIPBMAT-2-S you receive a compact complete system consisting of an electric powder oven, powder booth, and multicolor powder coating gun set. Ideal for workshops, small production areas, and companies looking to enter professional powder coating with a manageable investment. ☘️ Compact ☘️ Economical ☘️ Ready to Run ✅ Complete package of 3 machines ✅ Powder oven + powder booth + powder gun ✅ Attractive promotional price only until 06.06.2026 ✅ Ideal for small and medium-sized workpieces ✅ Perfect for entry-level, expansion, or small series production ✅ Everything from a single source – with Proton service and Matech quality ➖➖➖➖➖ Package contents: ✔️ 1 x Matech Electric Powder Oven MATOVENB-101610 ✔️ 1 x Matech Powder Booth MATBOOTH.FT.02-S ✔️ 1 x STR-ELITE Multicolor Powder Coating Gun Set ➖➖➖➖➖ Technical Highlights: ♨️ MATOVENB-101610 Electric Powder Oven Ndodpfx Ahewc En Ee Sec ✔️ Electric heating capacity: 18 kW ✔️ Total power: approx. 19.5 kW ±10% ✔️ Digital temperature control up to 220°C ✔️ Fan capacity: 1,500 m³/h ✔️ Timer function and automatic shut-off 🎨 MATBOOTH.FT.02-S Powder Booth ✔️ 2 polyester filters ✔️ Extraction capacity: 2,800 m³/h ✔️ 2.2 kW extraction fan ✔️ Workpiece guide into the booth ✔️ Suitable for concentrated coating applications within the booth 🔫 STR-ELITE Multicolor Powder Coating Gun Set ✔️ Multicolor version ✔️ AOS Automatic Optimization System ✔️ 4-mode memory function ✔️ Powder coating performance: max. 450 g/min ➖➖➖➖➖ ⚙️ Optional Extensions Available 🎨 Options for Matech Powder Booths: ✅ Nano filter box – enables operation without a fixed exhaust duct ✅ Base frame with sieve powder recovery system ♨️ Options for Matech Powder Ovens: ✅ PID temperature control for precise temperature management ✅ Touchscreen interface and smartphone control ✅ Ramp-heating mode for defined temperature profiles ✅ Storage of process parameters ✅ Weekly & monthly reports at the push of a button ✅ Insert shelf system or workpiece trolley ✅ Upper rail system for the oven ✅ ATEX version of the oven available on request ✅ Double-sided door design / front and rear doors ✅ Cart/trolley for the rail system ✅ Support feet for the rail system ✅ Custom dimensions available on request Rails and carriers are not included in the price. ➖➖➖➖➖ 🚀 Secure the promotional package now! This offer is only valid until 06.06.2026. After that, standard package prices apply. ✳️ We offer various financing models. Please contact us for leasing, hire-purchase, or installment payment options. Request your quote now – get your business ready for professional powder coating!

Condition: used, 2 used liquid sugar tanks Capacity: approx. 17 m³ Design: stainless steel, standing on 4 legs Njdpfx Ahjzkai Dj Sodc with 100 mm insulation and stainless steel sheet cladding with spray nozzle, agitator, manhole, and crane lugs Dimensions: height: approx. 5.85 m outer diameter: approx. 2.50 m inner diameter: approx. 2.30 m Available ex-stock.

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B/BP, used machine Manufacturer: Tool-Temp Type: TT 138 B/BP Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Nedpfozqbmdex Ah Sodc Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: used, Liquid chiller, cooling unit, Used machine Manufacturer: Hoffmann Type: ERK 360-H Overall dimensions: Width: 2200 mm Depth: 1000 mm Height: 2450 mm Year of manufacture: 1996 Cooling capacity: 36,000 kcal/h Refrigerant: R134A – 20 kg Max. operating pressure: 17 bar Ndodpoyzywljfx Ah Ssc Electrical data: 400V; 17 kW

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. Nodpfx Aowzmcbjh Sjdc DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: used, Truck dimensions (pallets): From 1 to 4) 140x110 h.120 Kg. 600 5) 140x130 h.40 Kg. 100 6) 150x100 h.90 Kg. 300 7) 320x100 h.120 Kg. 800 8) 320x90 h.80 Kg. 300 Inventory of parts: No. 69 pieces of 3 meters (total 207 meters) No. 1 piece of 2.80 meters No. 13 pieces of 3 meters (total 39 meters) No. 6 pieces of 1.80 meters (total 16.8 meters) nr. 2 pieces of 2.40 meters (total 4.8 meters) No. 1 piece of 1.50 meters nr. 2 pieces of 0.70 meters (total 1.4 meters) nr. 2 pieces of 1 meter (total 2 meters) Nsdjx Tuu Nspfx Ah Sedc No. 1 piece of 1.50 meters No. 17 curves of 1.20 linear meters (total 20.4 linear meters) with a pitch (diameter) of 1.15 meters No. 6 curves of 0.3 meters (total 1.8 meters) No. 1 trailer with 1.50 meter track

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 5,850 mm, total length: 12,125 mm, total width: 5,150 mm, overall weight: 8,000 kg, warranty duration: 12 months, inner dimension height: 5,000 mm, inner dimension length: 12,000 mm, inner dimension width: 5,000 mm, Equipment: cabin, lighting, PAINT BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: ‎ ㅤ- 2x supply fans ‎ ㅤ- 2x exhaust fans TECHNICAL PARAMETERS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four leaves, reinforced hinges) - An additional BOX 1650 mm x 8000 mm should be included in dimensions – can be placed on either the right or left side. - Structure: galvanized steel frame - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool insulation - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibration and the air surge effect from the main supply duct. Double Roof Design: - Upper outer layer - Inner truss structure with V600 ceiling filter Air Circulation System: - Supply system: Jet turbine 7.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 2 units Air Filtration System: - Pre-filter collects particles larger than 10 μm - Ceiling filter collects particles larger than 5 μm - Floor filter: Paint Stop - Carbon filter Lighting: - Ceiling lights: 52 LED tubes (14 angled fixtures with 4 tubes each) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burner: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating time: 8–15 min (max. 80°C) Optional Features: - Roof-mounted boxes Ndodpfx Aoxm U Exsh Sec - Insulated roof - Pass-through doors - Water curtain - Color according to RAL palette - Explosion-proof (EX) version available

Condition: ready for operation (used), Liquid chiller, Oil chiller, Neslab, used machine Manufacturer : Neslab Njdpfxeyvfrcs Ah Sodc Type : CFT300 Overall dimensions : 640 x 900 x 1090 mm Electrical data : 400 V, 50 Hz, 10 A Refrigerant : R22 Cooling capacity : 10.6 kW Adjustable temperature range : 5–35 °C Water flow rate : 75.7 l/min

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 2000x1000 mm- Motor rating 2.2 kW, 4.6 A, 3 Ph, 400V/50 Hz, 1430 rpm- Flow rate 6800 m³/h- Usable negative pressure 500 Pa- Filter surface 2.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 3400 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 2-stage switch, +5 m connection cable with power safety plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1912x1405x946 (2969x1405x1218)- Weight device approx. 248 kgItem No. 195 752 01 Ndjdpfxsv Svc Hj Ah Soc

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 150 kg, input voltage: 380 V, temperature: 220 °C, heating capacity: 12 kW (16.32 HP), inner dimension length: 1,000 mm, inner dimension width: 1,000 mm, inner dimension height: 1,000 mm, workpiece height (max.): 800 mm, workpiece length (max.): 800 mm, volume flow: 1 m³/h, energy consumption: 16 kWh, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs will be calculated separately depending on the delivery address. Please contact us for an individual transport quotation. ✅ Complete package for professional powder coating ✅ Brand new, unused industrial products ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also inquire about current stock availability. 🔥 SPECIAL OFFER ONLY UNTIL 06.06.2026 🔥 Package list price net: €17,770.00 Promotional discount: 15% = €2,665.50 ➖➖➖➖➖ ⭐ Mini Powder Coating System – MINIPBMAT-1-S COMPLETE STARTER PACKAGE FOR PROFESSIONAL POWDER COATING! With the MINIPBMAT-1-S, you receive a compact all-in-one system with electric powder oven, powder booth, and multicolor powder coating gun set. Ideal for workshops, small production areas, repair services, and companies seeking a cost-efficient, professional entry into powder coating with manageable investment. ☘️ Compact ☘️ Economical ☘️ Ready to use ✅ Complete package with 3 machines Nodpfev Rb E Djx Ah Sedc ✅ Powder oven + powder booth + powder gun ✅ Attractive promotional price only until 06.06.2026 ✅ Ideal for small and medium-sized workpieces ✅ Perfect for entry-level, expansion, or small batch production ✅ All from a single source – with Proton service and Matech quality ➖➖➖➖➖ Package contents: ✔️ 1 x Matech Electric Powder Oven MATOVENB-101010 ✔️ 1 x Matech Powder Booth MATBOOTH.FT.01-S ✔️ 1 x STR-ELITE Multicolor Powder Coating Gun Set ➖➖➖➖➖ Technical Highlights: ♨️ MATOVENB-101010 Electric Powder Oven ✔️ Electric heating capacity: 12 kW ✔️ Total power: approx. 14 kW ±10% ✔️ Digital temperature control up to 220°C ✔️ Timer function and automatic shutdown ✔️ Strong insulation: 150 mm 🎨 MATBOOTH.FT.01-S Powder Booth ✔️ 1 polyester filter ✔️ Extraction capacity: 2,500 m³/h ✔️ 1.5 kW extraction fan ✔️ Hanging device for guiding workpieces into the booth ✔️ Suitable for focused coating within the booth 🔫 STR-ELITE Multicolor Gun Set ✔️ Multicolor execution ✔️ AOS Automatic Optimization System ✔️ 4-mode memory option ✔️ Powder output: max. 450 g/min ➖➖➖➖➖ ⚙️ Optional available upgrades 🎨 Options for Matech powder booths: ✅ Nano filter box – operation possible without fixed exhaust ducting ✅ Booth base with sieve powder recovery system ♨️ Options for Matech powder ovens: ✅ PID control for precise temperature management ✅ Touchscreen operation panel and smartphone control ✅ Ramp heating mode for defined temperature profiles ✅ Process parameter storage ✅ Weekly & monthly reports at the push of a button ✅ Insert rack system or workpiece trolley ✅ Overhead rail system for the oven ✅ ATEX version of the oven on request ✅ Double door version / front and rear doors ✅ Traverse trolley for the rail system ✅ Support feet for the rail system ✅ Custom dimensions available upon request Rails and supports are not included in the price. ➖➖➖➖➖ 🚀 Secure your promotional package now! This offer is only valid until 06.06.2026. Afterwards, regular package prices apply. ✳️ We offer various financing models. Please contact us for leasing, hire purchase, or installment payment options. Inquire now – get your business ready for professional powder coating!

Condition: new, Year of construction: 2013, functionality: fully functional, Liquid cooling system New and never used Ndodpfxjw Dfmqj Ah Sec You are welcome to come for an inspection by appointment.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 12 Ratings ✈️ Shipping : 3-4 weeks ✈️ ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✅✅✅Energy class A+++✅✅✅ ⭐Offer Price €6,220 EXCL. VAT & SHIPPING ⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time 3-4 weeks❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ✨ Strong ✨ Economical ✨ Efficient ❗❗❗The fastest delivery time! Go direct from the manufacturer❗❗❗ Njdpfx Ahjc Uthxe Ssdc ►►►PROTON - WETLINE EX paint booth - VENTILATION CHAMBERS◄◄◄ ⭐WETLINE-EX-800-PRO⭐ ✔️ MOTOR POWER : 0.55 KW/H ✔️ FAN PERFORMANCE : 8000 M3/H ✔️ CARTON FILTER AREA : 2.6 m2 ✔️ FIBERGLASS FILTER AREA : 1.44 m2 ✔️ PANEL FILTER NUMBER G3: 2 PCS ✔️ PANEL FILTER AREA : 1.7 m2 ✔️ PRESSURE GAUGE : YES ✔️ MOTOR CONNECTION : BELT CONNECTION ✳️CABIN SOLUTION FOR LOW COST✳️ Exhaust/supply pods are ideal for converting an area in your factory for spray painting. They can also be used to create a prep area for sanding or cleaning parts prior to finishing. We have designed a variety of exhaust/supply chambers to meet your finish requirements while minimizing your footprint. Our exhaust/supply chambers share the same design features as our large industrial booths. ✳️ECO-FRIENDLY✳️ Each supply chamber meets safety and code requirements - NFPA-33, IFC to protect those working in an industrial spray environment and the environment outside. Their extraction/supply chamber is designed to efficiently remove overspray from the painting process while maintaining an even flow of air throughout the work area. ✳️FLEXIBLE AND ADAPTABLE ✳️ You will find that our chambers can be designed for both types of care. Supply Chambers are supplied with exhaust fan and motor as a package, with Supply Chambers specifically designed to accommodate an Air Supply Unit ✳️CNC AND CAD TECHNOLOGY✳️ Panels are made from Premium 1.5 - 2.0mm. Galvanized G-90 steel and precision stamped on m5 centers allowing for easy installation of nuts and bolts and it has reinforced construction to support the fan placed on top. ✳️QUIET EXHAUST FANS✳️ Typically operates at low dBa noise levels below OSHA limits ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 1,266 mm, total height: 2,847 mm, total width: 1,062 mm, warranty duration: 24 months, power: 1.5 kW (2.04 HP), input voltage: 380 V, filter area: 11 m², energy consumption: 2 kWh, Equipment: lighting, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Available immediately ⚡ Professional support! ✈️ The stated price is the gross price including VAT, plus shipping costs. ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for an individual transport quote. ✅ Available immediately – 1 unit in stock ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2 years warranty Available from stock – no production waiting time ⭐ Matech Powder Booth – MATBOOTH.FT-01-S MATECH QUALITY – WITH PROTON SERVICE! The Matech MATBOOTH.FT-01-S is a compact powder coating booth for professional manual powder coating of small and medium-sized workpieces. The S version is particularly practical for applications where the workpiece is inserted into the booth and coated within the booth. The workpiece can be pushed into the working area using the suspension device on the booth. This makes this version particularly suitable for applications with more intensive powder application. Thanks to the special fan motor housing, this booth enables comfortable and quieter operation. ☘️ Available immediately ☘️ Compact ☘️ Clean coating ✅ In-stock item – available immediately ✅ No waiting time for production ✅ S version for coating inside the booth ✅ Workpiece guidance via the booth's own suspension device ✅ Suitable for applications with more intensive powder application ✅ Compact solution for professional powder coating ✅ Quieter operation thanks to the special fan motor housing ✅ Automatic filter cleaning system ✅ Economical use through powder recovery ✅ Individual adaptation possible through various additional options ➖➖➖➖➖ Technical features: ✔️ 1 polyester filter ✔️ Filter dimensions: Ø325 x 725 mm ✔️ Automatic filter cleaning system ✔️ Adjustable cleaning time ✔️ Powder recovery container: 30 liters ✔️ Suspension device for guiding the workpiece into the booth ✔️ Special fan motor housing for quieter operation ✔️ 1 piece 1.5 kW extraction fan ✔️ Extraction capacity: 2500 m³/h ✔️ Control panel ✔️ Lighting ➖➖➖➖➖ ✨ No more exhaust connection needed – with the nano-filter box! ✨ With the optional nano-filter box, you can operate your powder booth without connecting it to an exhaust stack or a fixed exhaust duct. This makes the booth particularly flexible to use – even in workshops where there is no direct exhaust system. In addition, the booths can be individually adapted and modified to your working requirements with various options. ➖➖➖➖➖ Secure your in-stock item now! This powder booth is currently available in stock (1 unit). Ideal for companies that want to start professional powder coating in the short term or expand their existing coating capacity. Nsdpfx Aedhi Aaeh Sjdc ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer you various financing models. Please contact us for leasing, rent-to-own or installment payment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from the service and quality advantages! ✨ Request a quote now – make your company ready for professional powder coating!

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 14,295 mm, total height: 3,105 mm, total width: 3,260 mm, warranty duration: 24 months, workpiece weight (max.): 1,500 kg, power: 52 kW (70.70 HP), input voltage: 380 V, temperature: 250 °C, heating capacity: 48 kW (65.26 HP), inner dimension length: 4,200 mm, inner dimension width: 1,500 mm, inner dimension height: 1,800 mm, air demand: 6,000 m³/h, workpiece height (max.): 1,700 mm, workpiece length (max.): 4,100 mm, volume flow: 8,000 m³/h, filter area: 77 m², energy consumption: 70 kWh, insulation material: Steinwolle, insulation thickness: 150 mm, sheet thickness steel (max.): 3 mm, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately according to delivery address. Please contact us for an individual freight quote. ✅ Complete package for professional powder coating ✅ Brand-new, unused industrial products ✅ Proton Maschinenbau GmbH is the exclusive authorized distributor for Matech products in Europe ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also enquire about current stock availability. 🔥 PROMOTION VALID UNTIL 06.06.2026 ONLY 🔥 Package list price (net): €40,730.00 Promotional discount: 25% = €10,182.50 ➖➖➖➖➖ ⭐ Powder Coating System – MINIPBMAT-7-L LARGE COMPLETE PACKAGE FOR PROFESSIONAL POWDER COATING! With the MINIPBMAT-7-L, you receive a powerful turnkey system consisting of an electric powder oven, 7-filter L-version powder booth, and a multi-color powder coating gun set. This package is ideal for larger and longer workpieces as well as businesses seeking a high-performance manual powder coating solution. ☘️ Large ☘️ Powerful ☘️ Professional ✅ Complete package with 3 machines ✅ Powder oven + powder booth + powder spray gun ✅ Promotional price only until 06.06.2026 ✅ 7-filter booth with extremely high extraction capacity ✅ Very well suited for longer workpieces ✅ Attractive package with 25% promotional discount ➖➖➖➖➖ Package contents: ✔️ 1 x Matech Electric Powder Oven MATOVENB-151842 ✔️ 1 x Matech Powder Booth MATBOOTH.FT.07-L ✔️ 1 x STR-ELITE Multicolor Powder Coating Gun Set ➖➖➖➖➖ Technical Highlights: ♨️ MATOVENB-151842 Electric Powder Oven ✔️ Electric heating output: 48 kW ✔️ Total power: approx. 52 kW ±10% ✔️ Digital temperature control up to 220°C ✔️ Blower capacity: 6,000 m³/h ✔️ For longer workpieces and larger production areas 🎨 MATBOOTH.FT.07-L Powder Booth ✔️ 7 polyester filters ✔️ Extraction performance: 8,000 m³/h ✔️ 2 x 5.5 kW extraction fans ✔️ L-version with generous working area ✔️ Ideal for workpieces from approx. 4 m in length 🔫 STR-ELITE Multicolor Gun Set ✔️ Multicolor configuration ✔️ AOS Automatic Optimization System ✔️ 4-mode memory option ✔️ Powder coating output: max. 450 g/min ➖➖➖➖➖ ⚙️ Optional upgrades available 🎨 Options for Matech powder booths: Ndedpforgq Epex Ah Ssc ✅ Nano-filter box – enables operation without fixed exhaust ducting ✅ Booth base with sieve powder recovery system ♨️ Options for Matech powder ovens: ✅ PID controller for precise temperature regulation ✅ Touchscreen control panel and smartphone operation ✅ Ramp-heating mode for controlled temperature profiles ✅ Process parameter storage ✅ Weekly & monthly reports at the press of a button ✅ Insert shelf system or workpiece trolley ✅ Overhead rail system for the oven ✅ ATEX version of the oven available on request ✅ Double-door/front & rear door options ✅ Carriage/trolley for the rail system ✅ Support legs for rail system ✅ Custom dimensions on request Rails and supports are not included in the price. ➖➖➖➖➖ 🚀 Secure your promotional package now! This offer is valid until 06.06.2026. After this date, regular package prices apply. ✳️ We offer various financing solutions. Please contact us for leasing, hire-purchase, or installment payment options. Enquire now – make your business ready for professional powder coating!

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 2190w)x2350(h) Overall dimension(mm): 2295(w)x2295(h)x810(d) Technical data: Ndedpeia Ta Asfx Ah Sjc - Fan power 2.2kW (ATEX) - Fan suction capacity: 12000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 liquid ring vacuum pump. Please read the description carefully from beginning to end! The pump is not suitable for: Water, the food industry, and non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are better suited. Caution! The pump does not have explosion-proof certificates. It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal also does not have EX certificates! The pump is made of the special Alloy 59 material! This alloy is used when conventional chrome-nickel steels are no longer sufficient in terms of corrosion resistance. Especially when chloride-induced pitting and crevice corrosion and stress corrosion cracking are a problem. Nsdjigqutopfx Ah Sjdc Alloy 59 is used for: environmental technology, the chemical industry (chemical processes with oxidizing and reducing acids, resistance to wet chlorine gas), and waste incineration plants. Primarily, 2.4605 is used in the chemical industry, the pulp and paper industry, and in flue gas desulfurization plants. Excellent resistance to mineral acids such as nitric acid, phosphoric acid, sulfuric acid, and hydrochloric acid, and especially to sulfuric acid/hydrochloric acid mixtures. Typical applications are: -Equipment components for processes in organic chemistry with chloride-containing media, especially when catalysts based on chlorides are used. -Multipurpose plants in the chemical industry -Plant parts in the fine chemical and pharmaceutical industries -Scrubbers, heat exchangers, flaps, fans, and agitators for flue gas desulfurization plants (FGD) in fossil-fired power plants and waste incineration plants -SO2 scrubbers for ship diesel engines -Components for seawater and concentrated brines -Equipment and components for geothermal and sour gas applications -Reactors for acetic acid and acetic anhydride -Reactors for hydrofluoric acid -Sulfuric acid coolers -Piping in geothermal power plants -Components in flue gas desulfurization plants Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 volts Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings are new, and the mechanical seal has been refurbished by a specialist company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Connection: DN 50 (2")

Condition: used, 70 linear meter painting chain, with clutch system for a load of many products in confined space (see video) Nedpfxjivur Ao Ah Sjdc 70-meter painting line with friction system for loading multiple products in a small space (see video)

Condition: good (used), Year of construction: 2003, Filter rinsing tank Filtering takes place through an internal filter unit - Manufacturer: Atlantik GmbH - Model: 30.701.31.15100 - operating pressure: 10 bar - filtered grain size: 6.0 µmm (micron mm) - Overall dimensions: 1050 x 1150 x 1620 mm - Capacity: 425 L Nsdpfxsiw Eafo Ah Sedc - Electrical data: 250V, 5A, 50/60Hz - Year of manufacture: 2003

Condition: new, Year of construction: 2026, - External dimensions: 8125x4650x4600 mm - Internal dimensions: 8000x4500x3800 mm - Entrance gate: 4000x3800 mm (four wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 22kW - Seating: inside/outside Ndedsnbdlbepfx Ah Sec (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 36pcs. - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors