Used Roll Manufacturing Machine for sale (88,299)

Year of construction: 2018, condition: used, Roll production line König Artisan SFC Year of manufacture: 2018 Condition: cleaned & inspected Suitable for the production of ciabatta and square rolls Hourly output: max. 300 kg of dough Dough belt height: min./max. 12mm/32mm, depending on the dough Bsdpfx Aoz A Shasl Aoln Dough belt width: 170 mm Dough belt flouring system for the top and bottom Guillotine and punch for a wide range of products Touch panel with recipe management Proofer with water bath, type: MOC-C300 Includes 3 cutting rollers for 1 to 4-row operation Includes 1 punching tool of your choice, subject to availability

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW Bledpfoz Dxpmex Al Asn weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: used, Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine -Spare part top roller -Drawing with the pictures -Max. Sheet width: 2060 mm Bsdpfx Alocx T E Re Aoln -Max. Sheet thickness: mm -Roller diameter: 141 mm -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Bodpfeyzc Ruox Al Aeln

Condition: used, functionality: fully functional, Year of construction: 1986, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 260 mm, roller (top) diameter: 270 mm, side roll diameter: 260 mm, sheet thickness (max.): 16 mm, overall weight: 7,500 kg, total length: 4,040 mm, total width: 1,590 mm, total height: 2,095 mm, power: 11 kW (14.96 HP), Equipment: swiveling upper roller, Technical specifications: max. thickness of pre-bent rolled sheet: 16 mm, max. thickness of non-pre-bent rolled sheet: 12 mm, minimum rolling radius: 240 mm, maximum sheet width: 2000 mm. The machine is a three-roll machine – with an upper roll with a diameter of 270 mm and two lower rolls with a diameter of 260 mm, working speed for bending: 7.5 m/min, main motor power: 11 kW, total installed power: 18.1 kW, overall dimensions (L x W x H): 4040 x 1590 x 2095 mm, the weight of the sheet rolling machine is approximately 7,500 kg. The machine is currently disassembled in our warehouse in Přerov, where it can be tested if desired. Blsdpfx Aez Alf Uel Aon

Condition: used, Year of construction: 2026, Base frame for Fortuna roll presses, mobile or stationary Suitable for Fortuna automatic roll presses and other manufacturers (Fortuna semi-automatic, fully automatic, size 3/4) With heavy-duty, low-profile rollers or, depending on requirements, designed for stationary use With threaded mounting holes Bedpfx Aloz A Snte Aeln Made of solid stainless steel plate

Condition: good (used), Year of construction: 2008, For sale is an injection molding machine from Krauss Maffei, type KM 110-380. The machine is in good to very good condition; all maintenance and inspections have been carried out. Technical data: Year of manufacture: 2008 Extended tie bars Pneumatic nozzle shut-off 2x hydraulic core pull 31,000 operating hours Cylinder diameter: 35 mm Clamping force: 1100 kN Mold opening force: 70 kN Euromap63 interface for version > 1-04-09 Nitrogen accumulator available Included components: Bljdpeibyatofx Al Ajn Wedge shoes with screws and nuts Double-end wrench Declaration of conformity for the complete control cabinet Certificate USB memory stick Ejector coupling – mechanical, included in the control cabinet All prices are plus VAT. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality, but affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Condition: used, Year of construction: 2013, Roll forming line König Artisan SFC Year of manufacture: 2013 Condition: functional, bakery condition Suitable for the production of ciabatta and square rolls Hourly output: max. 300 kg of dough Dough belt height: min./max. 12mm/32mm, depending on the dough Dough belt width: 170 mm Dough belt flour applicator for the top and bottom sides Guillotine and punch for a wide range of products Touch panel with recipe management Molder with water bath, type: MOC-C300 Blodpfx Aloz A Smpe Asn Includes 3 cutting rollers for 1 to 4 row operation Includes 1 punching tool of your choice, subject to availability

Condition: used, total length: 4,100 mm, total width: 1,400 mm, total height: 130 mm, Colour: Grey Empty weight: 3.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Mechanical Bledpfx Aloz Avg Ns Aon - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 2540 - Top roll diameter [mm]: 220 - Bottom roll diameter [mm]: 220 - Transport dimensions: 4100mm x 1400mm x 135mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Bsdpfozcpu Uex Al Aoln Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning All information without guarantee.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 230655, control type: NC control, actuation type: hydraulic, roller (top) diameter: 320 mm, side roll diameter: 240 mm, sheet thickness (max.): 25 mm, overall weight: 10,500 kg, total length: 4,350 mm, total width: 1,800 mm, total height: 1,950 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, Key Technical SpecificationsWorking Length: 2050 mm Upper Roll Diameter: 320 mm Lower/Side Roll Diameter: 240 mm Bending/Rolling Capacity: Designed to handle steel plates up to 25 mm (rolling) and pre-bend up to 20 mm. Working Speed: 1.5 to 5 meters per minute. Main Features 4-Roll Design: Allows full circle and varying radius rolling with precise edge pre-bending in a single pass. Blsdpszzn A Tsfx Al Ajn Linear Guide System: Directs hydraulic piston power straight to the material for higher bending accuracy. Application Suitability: Ideal for medium to heavy metal fabrication, cylindrical ferrules, and stainless steel processing. Optional: NC-control, Hydraulic Overhead Crane (Lift) 2,5m

Condition: used, Year of construction: 2003, Used for the production of door liners by thermoforming. Year of manufacture: 2003 General Maximum roll diameter: 1200 mm Maximum roll width: 850 mm Minimum roll width: 570 mm Sheet loading height: 1750 mm Sheet feeding height: 1750 mm Discharge height of thermoformed product: 1750 mm Machine overall dimensions: See layout drawing Roll Unwinding Station Sheet loading: Manual Roll change: Automatic (pneumatic) Sheet pulling: Motorized Bledpfjzumnzox Al Asn Heating Station Format change: Motorized Format change stroke length: 500 mm Oven emptying in emergency: Automatic (pneumatic) Upper panel radiators: 134 × 300 W + 45 × 600 W Upper panel radiator power: 67,200 W Lower panel radiators: 112 × 600 W Lower panel radiator power: 67,200 W Forming Station Moving level of the mold holder Maximum stroke of pneumatic cylinders: 750 mm Closing force of pneumatic cylinders: 687.5 daN × 4 Clamping Ring Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders at 6 bar: 735 daN × 2 Pre-Stretching / Cooling Dome for Thermoformed Product Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders: 687.5 daN × 2 Electric fan power: 0.55 kW × 4 Vacuum System Pump capacity: 240 m³/h × 2 Pump motor power: 5.5 kW × 2 Tank capacity: 1200 L × 2 Pneumatic System Operating pressure: 6 bar (±10%) Air intake connection: Water System Operating pressure: 2.5 bar (±10%) Water intake (flow to chiller, closed-loop connection): DN ½" Temperature: 15°C (±10%) Electrical System Three-phase electrical voltage + neutral + earth: 400 V (+10% / -6%) Frequency: 50 Hz Installed power: 280 kW Current: 465 A Roll feed thermoforming machine currently used in the manufacture of refrigerator door liners. Thermoformer comprises: Roll Unwinding Station. Heating Station - Upper and lower pre-heaters and heating elements. Forming Station - Table closing force of daNx2: 735. Clamping Ring. Pre-Stretching / Cooling Dome. Vacuum System. Pneumatic System. Full workshop manuals. Machine footprint of approximately 10m x 3 m x 5m.

Condition: used, Year of construction: 2021, gebraucht 2021 9502 Türkei 2200 € 1 1050 mm Bjdpfx Alowiquqs Asln 2 mm 75 mm 1930 mm 700 mm 1160 mm 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: used, Year of construction: 2012, Roll production line WP Kemper Quadro Filius Year of manufacture: 2012 Weight range: approx. 25 to 360 g 1 to 6-row operation (depending on the cutting rollers) Throughput up to 180 Output approx. 1,400 to 4,000 pieces/hour Max. 320 kg dough/hour Dimensions L x W x H: 271 x 75 x 180 cm Blsdpfxjz A Ryus Al Aon Power requirement: 230 V Compressed air 6-8 bar Includes: 1 cutting roller (3-row), 1 die cutter

Condition: used, Year of construction: 1974, total length: 4,700 mm, total width: 1,800 mm, total height: 1,700 mm, Colour: Green Empty weight: 6.500 kg Price: On request - Year: 1974 - Documentation available: No - CE certificate present: No - Serial number: 1361 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 Blodpfxsz Avbao Al Aon - Max. sheet thickness [mm]: 8 - Max. prebending thickness [mm]: 3 - Max. working width [mm]: 2000 - Top roll diameter [mm]: 200 - Bottom roll diameter [mm]: 160 - Transport dimensions: 4700mm x 1800mm x 1700mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, Used DAVI 4-Roller Plate Bending Machine MCB 2020 Technical specifications: Year of manufacture: 10/1998 Manufacturer: DAVI Sheet working width: 2000 mm Sheet bending thickness: 10 mm Bodpfx Aoy I Uh Sjl Asln Pre-bending thickness: 8 mm Roll length: 2050 mm Connections: 400V / 50Hz / 10 HP Power: 4 kW Surface-hardened 4 rollers Variable bending and rolling speed Safety device with emergency stop switch Digital display of the 4-roller positions on the screen

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm Blodpfozwuu Uox Al Asn -Capacity rolling 20 mm -Prebend 16 mm ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Roundo hydraulic round bending machine, type PS 205 working width 2500 mm Bedjz Ebh Iepfx Al Aoln bending capacity up to 5 mm digital display for both side rollers tapered bending attachment hardened rollers incl. top support

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: NT2012, ESCOFIER MACHINE, EXCELLENT CONDITION, VERY LITTLE USED. 12-TON MACHINE. POSSIBILITY TO SEE IT OPERATING IN OUR WORKSHOP. Blsdoycq Ebjpfx Al Asn

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Smart Line, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 180 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, power: 11 kW (14.96 HP), input voltage: 400 V, number of digital displays: 1, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, DIGIMA W12-8x3200 Hydraulic Four-Roll CNC Plate Rolling Machine The DIGIMA W12-8x3200 is a hydraulic four-roll CNC plate rolling machine designed for accurate, repeatable and efficient sheet-metal forming. With a working width of 3200 mm, it is suitable for producing large cylindrical parts, sleeves, pipes, curved sections, housings, tanks and other technical components used in metalworking, steel construction, ventilation, machinery manufacturing and industrial production. The four-roll system provides a major advantage over conventional three-roll machines. The sheet is held securely between the upper and lower rolls, while the two side rolls perform the pre-bending and rolling operations. This arrangement allows both edges of the sheet to be pre-bent without removing and turning the workpiece, reducing handling time and limiting the length of straight sections left at the ends. The result is improved repeatability, higher productivity and more consistent part geometry. The W12-8x3200 can roll sheet metal up to 8 mm thick and perform pre-bending up to 6 mm. Its 3200 mm working length enables the processing of wide sheets for both one-off jobs and series production. The upper roll has a diameter of 210 mm, the lower roll 190 mm, and the side rolls 180 mm. The minimum rolling diameter is 400 mm, allowing the machine to produce a wide range of cylindrical and curved components. The hydraulic drive ensures smooth, stable movement and reliable clamping force throughout the forming process. The 11 kW motor provides the power required for regular industrial operation, while the rolling speed of 4 m/min supports efficient production without compromising process control. The rigid machine body and carefully arranged roll system help guide the material accurately and reduce unwanted deformation. Computerised CNC control makes the machine convenient to set up and operate. The operator can control roll movements, monitor the forming process and reproduce previously established settings for recurring jobs. This is especially useful in batch production, where the same diameter, radius and dimensions must be achieved repeatedly. The control panel also helps reduce setup time and simplifies everyday machine operation. The operating sequence is straightforward. First, the sheet is inserted and stabilised between the rolls. The side rolls then pre-bend the sheet edges, minimising flat ends. Finally, the material is passed through the roll system until the required tube, sleeve, arc or cylindrical shape is obtained. The machine can also be used for forming conical components by applying a controlled inclination of the rolls. Thanks to its wide working capacity and computer-controlled operation, the machine can be used in flexible workshop production as well as organised manufacturing processes. It is suitable for companies producing ventilation ducts, structural elements, machine covers, tanks, steel sleeves and custom-made components. Repeatable CNC settings are particularly valuable when several identical parts must be formed with the same diameter and curvature. Bodjznw T Ujpfx Al Aoln

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm Bodpfx Aloi Eg Nko Asln -Weight: 1308 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, - *Brand: FAMAR S.N.C. Officine Meccaniche - ALBIATE (MI) Italy* - *MODEL: A311 - 15/4* - *SERIES No. 571 - YEAR 1990* - Compliance: MAY 1990 - Art. R.233-69 of the Labor Code (French plate) - Type: Asymmetrical 3-roll bending machine *Features:* - Usable length: *1500 mm* (15 = 15 decimeters) - Thickness: *4 mm max in steel* (15/4 = 1500 x 4) - Rolls Ø ~ 110-120mm, hardened steel - Motorized: rear green motor as seen, 2.2kW - Control: remote control panel *FORWARD / REVERSE + UP / DOWN* Bljdpfx Alez E R Auj Aon (lower roll adjustable) - Weight: *~ 1,250 kg*

Condition: used, Year of construction: 2008, Roll production line König Classic Rex Combiline 800 This system is currently being refurbished (the photos are from the bakery). Suitable for the production of round, oval, and stamped rolls, as well as other dimpled rolls. Year of construction: 2008 Dough divider and rounder, type: Classic Rex T6 Proving cabinet, type: Combiline 800 Weight range: 45–100 g (stamp size: SK 61) Capacity: max. 9,000 pieces/h Pre-rolling for oval products before feeding into the proving cabinet Bjdpfxsz A Slfe Al Asln Proving cabinet with climate control (temperature, humidity) Side discharge conveyor for subsequent production (e.g., downstream wrapping machine) Stamping station including 2 stamping dies (Kaiser and salted rolls) Deposition machine for baking trays up to a maximum length of 100 cm.

Condition: new, Year of construction: 2026, roller (bottom) diameter: 70 mm, roller (top) diameter: 70 mm, side roll diameter: 70 mm, roller length: 1,050 mm, number of digital displays: 1, Equipment: cone bending device, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1050 x 1.8 mm – Bending capacity 1050 x 1.5 mm – Roll diameter 70 mm – Electrically adjustable rear roll – Digital display – Hardened rolls – Conical rolling – Swing-out upper roll – Brake motor – Foot control – Emergency stop Blsdpfsyp E Sijx Al Ajn – Documentation – 400V

Condition: as good as new (ex-display), Year of construction: 2024, 1-meter manual rolling mill with 3 rollers, featuring a disengageable roller. Robust cast iron structure. Rolling capacity: 1020 x 1.5 mm in mild steel. Bsdpfx Aloz Dugzj Ajln High-strength steel rollers. Professional roller with 3 asymmetric rollers. Retractable top roller at the front for easy removal of the rolled piece. Bottom roller adjustment via handwheel and eccentric. Rear roller height adjustment via handwheel, with the option to tilt the roller for conical forming. The bottom and rear rollers are equipped with various grooves for winding mechanical wires or small components. Gear transmission.