Used Rsf Elektronik Msa 554 for sale (394)

Condition: ready for operation (used), Year of construction: 2017, total height: 1,900 mm, overall weight: 1,260 kg, This RAPID DGL 200-E sawing machine was manufactured in 2017. It features a manual swivel range from 45° to 90°, a 500mm saw blade, and pneumatic saw feed. It includes both horizontal and vertical clamping cylinders, enhancing its versatility. Dimensions for the 3700mm cutting length are 5250 x 1420 x 1900 mm, and it weighs 1260kg. A robust choice for diverse cutting needs. Contact us for further details regarding this sawing machine. Cedpjzvu Npsfx Apbsrh Additional equipment • Pneumatic saw feed • Clamping device:2 horizontal clamping cylinders 2 vertical clamping cylinders Machine Benefits Qualitative Machine Benefits • The machine ran in two shifts for approximately 3 years and in one shift for the last few years. Technical Machine Benefits • Max blade diameter: 500 mm • Swivel range: manual 45° to 90° • Cutting lengths: 3700 mm Extra Information Drive: 2 x 2.2 kW motors Unit adjustment: Motor-initiated Saw feed: Pneumatic Swivel range: 45-90°, manually adjustable Clamping device: Two horizontal clamping cylinders Control system: Prepared for the attachment of a Rapid control system Fixed center support to support the profiles Saw blades D=500 2x ball screw spindle for unit adjustment Smallest sawing dimension: approx. 310 mm Equipment: DGL-200/R600 ELEKTRONIK with ATV 32 DGL200SE VERT. CLAMP NO. M. AGAINST DGL-200E DGL200TK SHORT T. CONNECTION DGL-200RB Movable roller conveyor, width 215 mm DGL-200E CONNECTION 2.2KW Preparation for FRENIC EXTRACTION CONNECTION Socket connection for extraction up to max. 2.2 kW prepared at the factory DGL200VP - PLANK PACK. FIXED CONTROL PANEL DG1.200 Dimensions Machine Depth 5250 mm

Condition: new, Year of construction: 2023, total length: 1,400 mm, · Arbeitshöhe max. innen 7,55 m · Arbeitshöhe max. außen 6,57 m · Plattformlänge – außen 1,40 m · Plattformlänge – außen, ausgeschoben 2,00 m · Max. Personen auf der Plattform (innen/außen) 2 / 1 · Tragfähigkeit 227 kg · Tragfähigkeit – ausgefahrener Plattformausschub 113 kg · Verfahrbar bis max. Plattformhöhe 5,55 m · Fahrgeschwindigkeit – eingefahren 4,0 km/h · Fahrgeschwindigkeit – ausgefahren 0,8 km/h · Steigfähigkeit – eingefahren 25 %/14° · Wenderadius – innen/außen 0 / 1,37 m · Hub-/Senkzeit 26 / 20 sec · Neigungssensor-Aktivierung (Längsachse/Querachse) 3° / 1,5° · Nichtmarkierende Vollgummi-Reifen 25,4 × 7,62 cm · Antriebsart 24 V DC (2 × 12 V 115 Ah) · Tankinhalt Hydrauliksystem (E-Drive) 5,7 L · Max. Reifen-Traglast 570 kg · Reifenkontaktdruck 1.133 kPa Cedoxd Emuopfx Apberh · Bodenlast 12,14 kPa · Geräusch-/Schalldruckpegel (Boden) < 70 dBA · Geräusch-/Schalldruckpegel (Plattform) < 70 dBA · Vibration < 2,5 m/s2 · Standard-Blei-Säure-Batterie · Hinten eingelassene Steckdose für Ladegerät · Nicht klappbares Geländer, Schwingtür auf halber Geländerhöhe · Stromkabel zur Plattform ohne Fehlerstromschutz · Stromkabel zur Plattform · Senk-, Neigungs- und Bewegungsalarm · Plattform mit Riffelblechboden · Doppel-Blitzwarnleuchten · Elektronik Horn (Hupe) · Befestigungspunkte für Auffanggurte · Schutzabdeckung für Plattformbedienpult · Plattform-Lasterfassungssystem · Proportionale Fahr- und Hubsteuerung · SmartLink Zweizonen-Steuerung · Notablass zum Senken der Plattform · In voller Höhe verfahrbar · Elektro-Doppelscheibenbremsen an den Vorderrädern · Zwei AC-Fahrmotoren an den Vorderrädern (E-Drive) · Vorrichtung zum elektrischen Lösen der Bremsen (nur E-· Drive) · Vollintegriertes Diagnosesystem mit Batterieladungsanzeige · Lochfahrschutz · Seitliche und hintere Staplertaschen für einfacheres Umsetzen · Nichtmarkierenden Vollgummireifen · Tech Pro Link Anschluss · Verzurrpunkte und Kranösen

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: - mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Crsdpfx Aowtctyepbeh Control panel Cooling unit for Rittal electric cabinet *

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Mafell Elektronik handheld router LO 65 Ec with Arunda 80N Maxi and LO-FA router adapter used, from business liquidation Woodworking machine with fine adjustment for routing depth for delicate work, as well as template applications in solid wood Crsdpfx Apsz H Up Iobsh Technical data according to the manufacturer: Mafell handheld router Type: LO 65 Ec Year of manufacture: 2021 Routing depth: 0 - 65 mm Universal motor: 230 V Tool holder (mm): 1/2" / 6 - 12 mm Design: MidiMAX in T-MAX Weight: 6.9 kg Idle speed: 10000 - 22000 1/min Power: 2600 W additional accessories, as shown in the picture: Mafell Arunda 80 N router template, year of manufacture 2022 Mafell LO-FA router adapter Copy ring ø 27mm Dust extraction hood We recommend an inspection to avoid misunderstandings. Information provided without warranty Information, details, and technical data from the manufacturer To prevent any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 am and 12:00 pm and 1:00 pm to 4:30 pm. During this time, inspections and collections are possible and desired, AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, compressed air connection: 8 bar, table width: 2,000 mm, cutting current: 260 A, positioning accuracy: 0.01 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, double-sided, For sale: used AJAN CNC plasma cutting machine with water table. The table is filled with water to a set level and cutting takes place just above the water surface. The water captures fumes and dust and cools the workpiece, so no separate filtration system is needed. The machine is compact and takes up little floor space. The gantry has dual-side servo drive. AJANCAM nesting software is included free of charge. ⭐️ Manufacturer AJAN Elektronik (Turkey) ⭐️ 1st Commissioned December 2015 Codpoy Annbsfx Apbjrh ⭐️ Table size 2000 × 6000 mm ⭐️ Plasma power source AJAN HP 260A ⭐️ CNC control AJAN own controller ⭐️ Nesting software AJANCAM nesting software – included free of charge + free updates in future. ⭐️ Cutting currents 30 A, 80 A, 130 A, 260 A ⭐️ Max. cutting thickness quality cut up to 30 mm ⭐️ Input voltage: 380 V ⭐️ Phases: 3 ⭐️ Frequency: 50 Hz ⭐️ Torch height control automatic ⭐️ Gas control automatic ⭐️ Condition in working order ⭐️ Price 16 500 EUR + VAT ⭐️ Transport and installation 5 500 EUR + VAT (in Baltics, Finland) ⭐️ Availability immediately ⭐️ Photos, layout, attached to this post ⭐️ video on request Need more information or a formal quote? please send a e-mail or give us a call.

Condition: used, This listing is for the Sartorius MSA225S-1CE-D1 + Sartorius YDP10 Printer Crjdpfx Apjyyp Hyeboh The unit is in full working condition and is ready for immediate use The Sartorius Sartorius MSA225S-1CE-D1 + Sartorius YDP10 Printer combination is a dependable laboratory balance and printer set designed for accurate and consistent weighing in research, education, and industrial environments. Built with precision engineering, it delivers reliable measurement performance for routine laboratory applications. Its robust construction ensures long-term durability, while the clear digital display allows for easy reading of results. The intuitive interface makes operation straightforward, reducing user error and improving workflow efficiency. Ideal for general laboratory weighing tasks, the MSE1245 Solent Scale provides the accuracy and stability expected from Sartorius equipment, making it a practical and cost-effective solution for everyday use

Condition: ready for operation (used), 1 x Stitching unit 380 with Amrys 2 x Stitching headsd HK75 1 x Caliper control with reject Crjdpfx Asxya Eqjpbeh 1 x Obluque sheet saddle monitor 1 x Remote control jogger inch 5 x Section feeders 370 with Amrys 1 x Cover folder feeder 554 with Amrys 1 x Three knife trimmer 449 with Amrys 1 x Muller Martini Perfetto stacker delivery 450

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. Crjdpfx Apou Itk Roboh The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: System-S/N: H 01 07 000-1 / Motor-S/N: 0141708310002, overall weight: 1,200 kg, The Pregler hydraulic power unit is a reliable and high-performance solution for supplying hydraulic systems in a wide range of industrial applications. It combines high-quality components in a robust housing to ensure stable pressure supply and efficient operation. The unit is versatile and can be easily integrated into existing installations, while its durable construction ensures long service life. Crjdowtgwiopfx Apbeh

Condition: used, functionality: unexamined, Equipment: CE marking, finger protection, safety light barrier, Innovative finger guarding system for pressbrakes utilizing following LASER optical safety light grids in front of the tool. Installation kit with documentation. Like new, partially sealed with protective film, very little use. Codpfx Apjx Dq T Tsbjrh

Condition: good (used), Year of construction: 2009, Position computer, computer, control unit, robot controller, controller, CNC controller, operator panel, computer monitor, screen, TFT industrial monitor -Manufacturer: BR Elektronik / Grenzebach, Computer -Type: Mini PC 8000 -Number: 1 computer available -Dimensions: 385/210/H95 mm Credpfeyu Ic Iex Apbjh -Weight: 4.4 kg

Condition: like new (used), GBS Test Pulse Rev. 3 Pulse Generator for Long-Term Insulation Tests The test pulse design is designed for long-term insulation tests on test objects with capacitances up to 6 nF. Converter for High-Voltage Test Transformer · Internal sine wave generator: 50-200 Hz. · Pulse width modulation of the sine wave from 16-24 kHz via full bridge. · Converter voltage adjustable from 0-600 V, Imax=2.6 A, maximum power 1.3 kW · Pulse current limit 110 A (cut-off threshold) Pulse Transformer Control · Control via full bridge · Full-bridge power supply adjustable from 0-1000 V, 1.3 A max. · Pulse current limit 100 A (cut-off threshold) Pulse width 20-120 μs, nominal 94 μs, adjustable · 2 selectable series inductors (150 μH, 300 μH) to adjust the pulse width and rise time to the load capacitance and voltage. · Pulse repetition frequency (0.1 – 2.5 kHz), adjustable. · Polarity: Adjustable positive, negative, or alternating depending on the polarity of the sine signal. · Cosine-shaped pulse at the transformer output Pulse transformer cascade · Output transformers in a 5-way cascade circuit. · Total transformation ratio selectable as 1:7.7, 1:10, or 1:15 via taps. Crsdeu Egz Ropfx Apbsh Maximum output voltage 15 kV with possible load capacitances of: * 6 nF with a pulse width of 73 μs at a repetition frequency of 2.5 kHz * 10 nF with a pulse width of 103 μs at a repetition frequency of 1.25 kHz · 1:1000 parallel voltage divider. · Overvoltage limitation at approx. 20-23 kV through parallel spark gaps. · Thermistor for overtemperature detection in the first transformer stage. · Ground-side current measurement socket 100 mV/A. Breakdown detection, test · If the maximum bridge currents for the transformer controls or if the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. · The device has a resettable operating hours counter to determine the test time. Manufacturer's price approx. €59,500 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Quantity: More than 10 available Used safety module / fieldbus module for industrial automation and PROFINET applications from Murr Elektronik. Manufacturer: Murr Elektronik Model: MVK-MPNIO F DI16/8 7/8" IRT Article number: 5556 Device type: Safety device / safety module Communication: PROFINET IO IRT-capable: Yes Digital inputs: 16 safe inputs / 8 channels Connection type: 7/8" connector Application area: Industrial automation technology Mounting type: Field mounting Crjdpfx Apszi Dx Hebsh

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Overhauled TOP Technical data: >> Machine no. 53819/08 Cjdsvb Ud Uopfx Apbjrh >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1.5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill - SK40 >> Spindle brake >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display from RSF Elektronik >> Coolant device >> Machine feet To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. The FP1 was overhauled by Huttelmaier in 2006 and has been used very little since then. The digital display from RSF makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Condition: used, Quantity: More than 10 available Used safety module / fieldbus module for industrial automation and PROFINET applications from Murr Elektronik. Manufacturer: Murr Elektronik Model: MVK-MPNIO F DI8/4 F DO4 7/8" IRT Article number: 5557 Cjdpfx Apjzi Dy Doborh Device type: Safety device / safety module Communication: PROFINET IO IRT compatible: Yes Digital inputs: 8 safe inputs / 4 channels Digital outputs: 4 safe outputs Connection type: 7/8" connector Application area: Industrial automation technology Mounting type: Field mounting Condition: Used

Condition: used, Year of construction: 2000, Sold for parts, ADU card missing. Automatic tablet testing system - Laboratory measuring equipment Crodpfjx Rz I Dex Apbeh - Tablet tool Enables testing of: Hardness Diameter Thickness Weight Precision balance Sartorius WZ64S Scale : 10 à 50 g Unit : mg / 0,5 mg / 0,1 mg adjustable Thickness Drive: stepper motor. Measuring principle: linear potentiometer. Unit of measurement: mm or inch. Tolerance: +/- 0.1 mm Hardness Drive: stepper motor. Measurement: load cell (lmz) Measurement principle: dynamometric gauge Unit: N, Kp or Sc Diameter Drive: stepper motor. Measuring principle: stepper motor. Unit of measurement: mm or inch. Scale: 3 - 18 mm / 3 - 30 mm (manual) Tolerance: +/- 0.1 mm Tension : 100 / 240 V, 50Hz / 60 Hz The UTS is a universal, fully automated testing system developed for use in industry. This tool is the approved model of a series of test systems that have been tested over many years. It was developed in close collaboration with the pharmaceutical industry. The UTS 4.1 can be used to test round, oval, square and oblong tablets, as well as many special shapes. For delicate oblong tablets, the proven oblong centring system (OZB) can be integrated. All parts requiring cleaning can be removed quickly and easily without any tools. The test system can be supplemented with various options, such as a distributor and/or sample collector with a different number of stations. Use the UTS as a laboratory tester or an online control device connected to a tablet press. Sampling can be triggered either in the production machine or using the TTS11 software.

Condition: excellent (used), Modular system consisting of 6 channel modules Manufacturer: Murr Elektronik Model: Mico Pro Cjdoywynispfx Apbjrh 2 units are available individually, and several units are installed in control cabinets. We have several control cabinets in stock, with various configurations or also empty.

Condition: used, Year of construction: 1980, functionality: fully functional, GEA Westfalia MSA 170-05-076 Whey Cream Separator Year:1980 Cjdpfx Apezy Rkwoberh 22,000L

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: A20611RM1, working width: 1,150 mm, feed rate X-axis: 3 m/min, type of input current: three-phase, sheet thickness (max.): 150 mm, overall weight: 3,900 kg, input voltage: 400 V, nominal power (apparent): 86 kVA, compressed air connection: 6 bar, input frequency: 50 Hz, workpiece width (max.): 1,150 mm, grinding width: 1,150 mm, height adjustment type: pneumatic, input current: 400 A, The COSTA MSA 2 CCCS 1150 is an industrial wide belt sander with three working units, designed for professional deburring, calibration, and superfine finishing of metal parts. It is intended for high productivity and excellent surface quality when processing steel, stainless steel, and aluminum. The machine offers adjustable speed, robust industrial design, central extraction, and the option for fine-tuning the working process to meet the needs of any metalworking company. Csdpfoxugxaox Apberh

Condition: used, Year of construction: 1997, Micoflow insulator - Glovebox Glovebox insulator The device is unused. with microfilter extraction unit type 112108614A36, flow rate 1870 m³/h with 2 airlocks (for feeding and discharging work materials) Inlet/outlet size: W:400 x D:260 x H:430 mm ilumination 2x glove ports Castors (appliance can be moved) Front panel made of polycarbonate Interior dimensions: W:1200 x D:650 x H:100 mm Machine dimensions: W: 2100 x D: 850 x H: 2100 mm Cjdpfx Apevw I Npeberh Weight: approx. 400 kg *

Condition: excellent (used), Switch Mode Power Supply Manufacturer: Murr Elektronik Model: Emparro 20-100-240/24 Cedjywxz Uepfx Apbjrh Art. No.: 85442 Input: 100-240 VAC, 50/60 Hz, 5.3-2.3 A 100-230 VDC.... Output: 24 VDC, 20 A, SELV IP20 8 units are available individually, and several more are integrated in control cabinets. We have various control cabinets in stock, with different configurations or also empty.

Condition: refurbished (used), Year of construction: 2014, turning diameter over cross slide: 480 mm, turning length: 680 mm, turning diameter: 410 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 290 mm, travel distance Z-axis: 750 mm, spindle motor power: 22 W, Brand: Hyundai-Wia Model: L-300/MSA Category: CNC Lathes Year of manufacture: 2014 Crsdsx Elzkjpfx Apbsh CNC Control: FANUC Series 32i-Model A Machine weight: 7,000 kg Machine dimensions: Length: 4,780 mm Width: 2,055 mm Height: 2,000 mm Capacity: Maximum swing over bed: 750 mm Maximum swing over carriage: 480 mm Maximum turning diameter: 410 mm Maximum turning length: 680 mm Bar capacity (spindle/sub-spindle): 76 mm / 65 mm Travel: X-axis: 290 mm Z-axis: 750 mm ZB-axis: 700 mm C-axis: 360° (minimum indexing angle: 0.001°) Spindle: Spindle diameter: 254 mm Spindle speed: 3,500 rpm Spindle nose: ASA A2-8 Spindle motor power (max./cont.): 22/18.5 kW Minimum C-axis control angle: 0.001° Sub-spindle: Sub-spindle diameter: 210 mm Sub-spindle speed: 4,000 rpm Spindle nose: ASA A2-6 Sub-spindle motor power (max./cont.): 11/7.5 kW Minimum C-axis control angle: 0.001° Turret: Turret stations (live tool capable): 12 Live tool speed: 4,000 rpm Live tool motor power (max./cont.): 5.5/3.7 kW Turning/boring tool dimensions: 25x25 mm or 50 mm Rapid traverse: X / Z axis: 20,000 mm/min Z axis: 24,000 mm/min Accessories and additional features: Chip conveyor Coolant tank with 20 bar high-pressure wash pump Automatic tool setter with push button and M code (down/up) Various live and static tool holders included Comprehensive documentation: manuals, electrical diagrams, CE declaration

Year of construction: 2005, condition: good (used), machine/vehicle number: 8382, 2-head welding machine for PVC profiles Crsdpfxozdq Ttj Apboh

Condition: excellent (used), Year of construction: 2014, operating hours: 52 h, functionality: fully functional, power: 85 kW (115.57 HP), fuel type: electric, operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, 5 × RENNER screw compressors – 2 × RSF 85 + 3 × RSF 45 – Frequency-controlled – Water cooling – Heat recovery – Modbus A total of 5 compressors: - RENNER RSF 85 (85 kW) – 52 operating hours - RENNER RSF 85 (85 kW) – 123 operating hours - RENNER RSF 45 (45 kW) – 22 operating hours - RENNER RSF 45 (45 kW) – 138 operating hours - RENNER RSF 45 (45 kW) – 53 operating hours For sale is a package of RENNER RSF screw compressors in an industrial design. All machines come from an industrial test bench system in our own facility and were procured for a development project. Due to a project change, the test benches never went into productive operation. The compressors were then dismantled and stored. This is a specially configured industrial design with special features and practically no productive runtime: - Frequency control - RENNERtronic Plus control system - Modbus interface – integration into building automation systems possible - allowing external setpoint input (pressure/speed) - Water cooling - Design for high cooling water temperatures (60/80 °C) – but does not necessarily have to be used - High outlet temperature for efficient heat recovery (ideal for heating support) Technical data RSF 85 85 kW Frequency-controlled Operating pressure 5–10 bar Flow rate up to approx. 14.5 m³/min Water cooling RENNERtronic Plus Modbus Csdozi Ukmepfx Apborh RSF 45 45 kW Frequency-controlled Operating pressure 5–10 bar Flow rate up to approx. 7.25 m³/min Water cooling RENNERtronic Plus Modbus The compressors were specifically designed for the utilization of waste heat. The water cooling allows high cooling water temperatures to be achieved, making the systems ideally suited for heat recovery and feeding into heating systems. The operating pressure can be increased to up to 15 bar by a modification of the pulleys and V-belts as provided by RENNER. A corresponding offer from RENNER is available, but the modification was never needed. Inspection: The machines are dismantled and stored. An inspection is possible at any time by appointment. We will gladly send further photos, nameplates and technical documents upon request. Price: Negotiable / Offers welcome.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, type plate available, Oil-Free Screw Compressor RENNER RSF 250 D – 250 kW – 45,000 l/min – Year 2015 Technical Specifications • Manufacturer: RENNER Kompressoren • Model: RSF 250 D • Year of manufacture: 2015 • Serial number: 545073 • Motor power: 250 kW • Air flow rate: 45,000 l/min (45 m³/min) • Working pressure: 7.5 bar • Maximum permissible pressure: 13 bar Cjdpfx Aozm Nhnopbjrh • Soundproofed enclosure • Electronic control with digital display • Fully automatic operation • Industrial design for continuous service