Used Topcut 650 for sale (3,133)

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Hsdpfxjw Inpns Airsfl

Condition: excellent (used), functionality: fully functional, El. heated salt bath continuous furnace system, make Kohnle Hfedpoy Uuwmofx Airol consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: good (used), REMA DMNE-650/35 RADIAL SAW For sale is a used radial/swing arm saw from the Polish company REMA S.A. from Reszel. Model DMNE-650/35, manufactured in 1998, serial number 346. The machine has a robust cast iron construction and an adjustable arm, allowing for cross cuts and cuts at various angles. TECHNICAL DATA: - manufacturer: REMA S.A. Reszel - model: DMNE-650/35 Hsdpsz Alxhefx Airofl - serial number: 346 - year of manufacture: 1998 - type: radial/swing arm saw - blade diameter: 350 mm - maximum cutting width: up to 650 mm - maximum cutting height: approximately 95 mm - motor power: 2.2 kW - power supply: 380 V - type of current: 3-phase - frequency: 50 Hz - rated current: 5.6 A - spindle speed: approximately 2920 rpm - spindle end diameter: 30 mm - arm adjustment in the vertical plane: ±90° - carriage adjustment in the horizontal plane: ±90° - carriage adjustment in the vertical plane: ±90° The machine is equipped with a 3-phase electric motor and control with an on/off button. The arm can be moved and adjusted relative to the table, allowing for various types of cuts. CONDITION: The machine is used and shows visible signs of wear. The visual condition is shown in the photos. Sold exactly in the condition and configuration shown in the photos. The machine can be inspected on-site before purchase.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Formcook mod Combi 650 1.108EFS Teflon belt fryer whit flip on the middle year of construction 2011. Belt wide 650 mm. Hfedpfx Aiexl Tucjrsl

Year of construction: 2005, operating hours: 2,120 h, condition: good (used), functionality: fully functional, blade length: 650mm with opposed shear cutting, 3 rotating blades, 2 counter-blades, 55kW motor, grinding extraction system with flexible screw conveyor (not included), front opening, control panel, soundproofing, spare set of new blades. Hfsdpfx Aezbqyvoirol

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 66184003, type of input current: three-phase, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 380mm Chipping Width : 650mm Rotor - Diameter : 1200mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 30-40 t/h (Depends on kind of material, material mixture, type of feeding and humidity) Chipping Length : Approx. 25mm Electric Motor : 2 x 125kW Voltage : 380-400V Hodpow U A Skofx Airjfl Geared Motors : 2 x 11kW Sew Eurodrive Infeed Rollers : 9 Pcs Feeding : Horizontal Drive : By Belt

Condition: used, mileage: 204,500 km, power: 478 kW (649.90 HP), first registration: 04/2018, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x4, wheelbase: 4,400 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, traction control, = Additional Options and Accessories = - Remote central locking - Refrigerator - Air suspension - Hub reduction - PTO - Radio - Rear view camera - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = Copma 1150.8 JIB J6 Year 2018 Winch. Hydraulic outriggers. Hydraulic extensions 8 + 6. Scanreco radio remote control. 4.52 m - 19,400 kg 6.10 m - 14,100 kg 7.72 m - 10,800 kg 9.47 m - 8,500 kg 11.22 m - 7,000 kg 13.82 m - 5,700 kg 15.20 m - 4,900 kg 17.15 m - 4,300 kg 19.52 m - 3,760 kg 22.50 m - 2,450 kg 23.90 m - 2,300 kg 25.50 m - 2,030 kg 27.20 m - 1,510 kg 29.00 m - 1,180 kg 30.90 m - 960 kg 32.80 m - 720 kg = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf spring Front axle 2: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring Rear axle 1: Tire size: 315/70R22.5; Twin tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Twin tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70%; Suspension: Air suspension Weights Unladen weight: 27,417 kg Payload: 9,583 kg GVW: 37,000 kg Functional Crane: Copma Financial Information Price: On request Identification Hodpfx Aozddwtsirsfl Model number: FH16 650 8x4 / 115 tm CRANE / KR = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT, Govorim po ryccki). We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, Year of construction: 2012, Control POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid edge thickness (mm) 12 Feed speed mt/min 20 Upper motorized rubberized belt Manual infeed guide Anti-adhesive group Rightening group Gluing with EVA glue Edge holder plate End trimming group with automatic inclination adjustment Staggered trimming and cornering group with two motors Linear 2-motor rounding group Edge scraper group Glue scraper group Brush group Hedpfxowwk Duo Airjfl

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, cutting force: 650 t, - Machine in very good technical and optical condition, fully refurbished - CAT engine - Cutting force: 650 tons - Semi-mobile - Filling bed: 7m Hfedsy Ncqwjpfx Airjl

Condition: used, 328467, N 15/65HA, Nabertherm, muffle furnaces up to 650°C Model: 328467 Type: N 15/65HA Condition: Used Hfodsur S I Iepfx Airol

Condition: ready for operation (used), Assfalg ASO 650 S Edge Milling Machine, Chamfering Machine, Deburring Machine Maximum chamfer width: 0-7mm Angle adjustment: 15°-45° Hedpezy E D Sefx Airjfl Dimensions: approx. 400 × 500 × 300 mm Weight: approx. 52 kg Radius [mm]: 1.2 | 2 | 2.5 | 3 | 4 | 6 You are welcome to visit us for an inspection. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2003, functionality: fully functional, HORIZONTAL MACHINING CENTER "FAMUP" MOD. MF 650 CNC FANUC SPINDLE HSK 63 15,000 RPM TRAVELS MM 700X660X550 PALLET MM 500X500 FULL ROTARY TABLE ATC 50 POSITIONS HIGH-PRESSURE COOLANT Hfsdpfoxwccmox Airsl CHIP CONVEYOR YEAR 2003

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 2,000 mm, Mazak CNC Mill – Turn Centre Model: E-650H Control: Mazatrol 640M Pro Year: 2004 Distance Between Centres: 2000mm Hodozlhp Ispfx Airofl Swing Over Bed: 905mm Machine With: C Axis Y Axis Live Tooling/Milling B Axis 800mm Power Chuck Manual Steady 375mm Open Steady 600mm Air Filer Mist

Condition: used, Year of construction: 2003, Format: 390 x 285 mm Equipment: Book stacker Book Format Dimensions (Height x Width) Minimum format: 115 x 100 mm (down to 115 x 70 mm with optional small-format modifications) Maximum format: 390 x 285 mm (up to 390 x 310 mm with specific produ Hsdpfx Aijzphl Rorefl Book Thickness Minimum thickness: 5 mm Maximum thickness: 90 mm Stacking and Pile Height Maximum stack / pile height: 340 mm Operational Performance Mechanical capacity: Up to 3,900 cycles per hour (or roughly 65 cycles per minute) Infeed and Rotation: Features a built-in turning device capable of rotating the blocks gently

Condition: used, machine/vehicle number: 005642, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3 Hfedpfx Aewuciweirel

Condition: excellent (used), Year of construction: 2021, operating hours: 50 h, Machine for sale in good condition it has low operating hours. Hedpfexbb Hrjx Airefl

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm Hedpfx Ajw U N Ixsirjfl - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X: 560 mm Travel range Y: 410 mm Travel range Z: 410 mm Clamping area: 650 × 410 mm Table load: 250 kg Spindle speed: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Siemens Hfsdpoz Ahxqsfx Airol

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, overall weight: 7,500 kg, grinding diameter: 300 mm, controller model: Siemens Sinumerik 840D Solutionline, No minimum price – guaranteed sale to the highest bidder! The control system was upgraded to a Siemens Sinumerik 840D Solutionline in 2014. The new control system was overhauled in 2016! TECHNICAL DETAILS Spindle speed range: 170–18,000 rpm Grinding diameter: 20–300 mm Swinging diameter: 350 mm (500 mm) Workpiece length: 300 mm (1,300 mm) Recommended grinding depth: up to 300 mm Center height above the workpiece table: 200 mm (300 mm) Center height above the grinding table: 330 mm (430 mm) Workpiece spindle bore: 50 mm (70 mm) Grinding table, Z-axis Total grinding table travel: 650 mm (950 mm) Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed rate: 0–9.99 m/min Feed rate: 0–99.99 m/min Incremental feed value during reversal: 0–0.999 mm Grinding table, X-axis Total grinding table travel: 150 mm Resolution: 0.001 mm/rev Rapid traverse: 5 m/min/rev Grinding feed rate: 0–5 m/min/rev Hfjdpfx Aezwmz Toirjl Feed rate: 0–99.99 mm/min/rev Incremental feed value during reversal: 0–0.999 mm/rev Workpiece spindle head, B-axis Swivel range: −32° (−23°) to +2° Resolution: 0.0001° (0.36″) U-axis Total travel: 300 mm Resolution: 0.001 mm/rev Traverse speed: 5 m/min MACHINE DETAILS Control system: Siemens Sinumerik 840D Solutionline Machine weight: approx. 7.5 t Space requirement: approx. 5.00 × 4.00 × 2.20 m

Condition: used, Year of construction: 1948, total length: 1,900 mm, total width: 1,250 mm, total height: 2,650 mm, Colour: Green Empty weight: 5.000 kg - Year: 1948 - Documentation available: No - CE certificate present: No - Serial number: 100150 - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 100 - Min. stroke [mm]: 13 - Max. stroke [mm]: 127 - Table length [mm]: 650 - Table bore diameter [mm]: 650 - Ram width [mm]: 250 - Throat depth [mm]: 310 - Max. opening height [mm]: 330 Hedpfx Aioz Au Ulorefl - Height adjustment [mm]: 80 - Pressing speed [mm/s]: 235 - Transport dimensions: 1900mm x 1250mm x 2650mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you: CNC machining center, universal, with pallet automation Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: Machine 2023 / Automation 2025 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Hsdpsz A A Dxsfx Airofl Tool changer: Tool holder: SK 40 Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4020 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Scraper-type chip conveyor with cleaned filter screen - Internal coolant supply (IKZ) 40 bar, consisting of: - Paper band filter - 600 l tank - Cabin roof - Rotary through-feed in the spindle - Double filter - Blow-off air through the spindle center - Rotating viewing window - Flushing gun for chip removal - Oil and emulsion mist separator - Infrared measuring probe, manufacturer Heidenhain TS 460 (if available) - Tool measurement system, manufacturer Heidenhain TT160 (if available) - Preparation for 3D quickSET - Automation interface PH Cell, consisting of: - Interface - 4-channel rotary through-feed - Automatic loading door - Operating mode 4 - Tracy surface interpolation - Pallet loading and unloading system PH 150, consisting of: - 10-position pallet storage - External electronic handwheel (if available) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: used, mileage: 204,500 km, power: 478 kW (649.90 HP), first registration: 04/2018, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x4, wheelbase: 4,400 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, parking heater, traction control, = Additional Options and Accessories = Hedpfx Aeyxn S Esirsfl - Remote central locking - Air suspension - Hub reduction - PTO - Radio - Rear view camera - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = Copma 1150.8 JIB J6 Year 2018 Winch. Hydraulic outriggers. Hydraulic extensions 8 + 6. Scanreco radio remote control. 4.52 m - 19,400 kg. 6.10 m - 14,100 kg. 7.72 m - 10,800 kg. 9.47 m - 8,500 kg. 11.22 m - 7,000 kg. 13.82 m - 5,700 kg. 15.20 m - 4,900 kg. 17.15 m - 4,300 kg. 19.52 m - 3,760 kg. 22.50 m - 2,450 kg. 23.90 m - 2,300 kg. 25.50 m - 2,030 kg. 27.20 m - 1,510 kg. 29.00 m - 1,180 kg. 30.90 m - 960 kg. 32.80 m - 720 kg. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf spring suspension Front axle 2: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70%; Suspension: Air suspension Weights Unladen weight: 27,417 kg Payload: 9,583 kg GVW: 37,000 kg Functional Crane: Copma Financial Information Price: Upon request Identification Model number: FH16 650 8x4 / 115 tm CRANE / KR = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki). We strive to provide accurate information. However, no rights can be derived from the information provided.

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, machine/vehicle number: REFLEX 36290, This is a fully functional machine that will be ready for delivery in December 2025. It includes a loading table - it has dimensions of 6000 * 2500 mm. The length of the chamber is 6000 mm. The expected status as of December 31, 2025 will be approximately 8,800 hours. The machine is located at: U Panelárny 461, Předměřice nad Labem. Hsdpswhnbfsfx Airofl

Year of construction: 2016, condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Hodpfxougmx Ao Airjfl

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation Hsdpsyzylvjfx Airefl 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten