Used Unbekannt 2 Column Punching Tool for sale (95,632)

Condition: used, Tool presetting device SOMET type SPS 500 U Machine no.: S1 Year of construction: 1987 Table surface: 545 x 1000 mm Travel paths: X = 500 mm, Y = 340 mm Pedpfxjdzqrto Aprjpt Width in portal: 550 mm Height table to portal underside: 250 mm - Longitudinal portal guide right and left on the table - Adjustment via very fine threaded spindles with handwheel - Quick adjustment by electric release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 clamping fixtures for tool measurement - On base with shelf and drawer Required space (L x W x H): 1100 x 700 x 1650 mm Weight: 560 kg Good condition

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks. Ppodpfx Apsdzqmzsrjt

Condition: used, Single column eccentric press PELS - RICHTER type PEKR 125 Machine. No. 20684 Year of construction 1967 pressure force 125 ton. throat 430 mm table size 1100 x 750 mm ram area 890 x 650 mm table opening Ø 400 mm stroke adjustment 6 to 115 mm ram adjustment 100 mm installation height largest stroke top max. 450 mm Clamping spigot bore Ø 50 mm Stroke rate 60 strokes/min. Table height above floor 900 mm motor power 7,5 kW Mains connection 380 Volt, 50 Hz - Overload protection by crushing plate in ram - Compressed air clutch-brake combination DESCH - ram weight balancing cylinder - manual ram adjustment - two-hand operation - cam gear - Grease central lubrication Vögele - stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm weight approx. 10 ton. Ppsdpfx Apofim Thsrst good condition

Condition: used, Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 pcs. punching brackets, punching unit for press brake Year of manufacture approx. 1990 Pedpfxsdz Sp Hs Aprept throat depth: 160 mm Punching capacity: 0.3 to 5 mm material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) A ø 5 mm round punching tool is installed Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brake Punching frame base plate dimensions L x W x H: 2500 x 345 x 37.5 mm Punching frame pressure plate dimensions L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Manufacturer: Mubea, die Ø 90 mm -Type: Mubea 90 Mounting Ø 50 mm Psdoiqhg Uspfx Aprept -Dimensions: Ø 90 x 115 mm -Weight: 3.4 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 52 mm Ppsdpfxjiqhh Ie Apret -Type: Mubea 52 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 125 mm -Weight: 6,8 kg

Condition: used, Separating tool, punching tool, punch, punching die, punching punch, gill forming tool Ppjdpfoc Nlyxsx Aprst -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 97 mm -Dimensions: 220/335/H115 mm -Weight: 32 kg

Condition: used, Separating tool, punching tool, punch, punching die, punching die, gill forming tool Podpforfzthjx Aprept -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 70 mm -Dimensions: 220/320/H115 mm -Weight: 32 kg

Condition: excellent (used), Punching tools for window construction -various types: AM -9333/9352-1/9335/9334/94-234907 Ppsdpfx Apob A Iicorst -Sale: only complete set -Total weight: 50 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, Ppsdpfx Ajiqhhvjprot -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 1-4 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 2 holder Ø 50 mm Psdpfxjiqhh Se Aprjpt -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 5,9 kg

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 65/49 mm -Recording: dimensions see photos -Price: complete Pedpfjf Nrp Tsx Aprept -Dimensions: 195/400/H220 mm -Weight: 42.7 kg

Condition: used, Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square Podpfx Apst Hmi Aerept -Manufacturer: RUS, square hole punch with tension screw -Size: 69 x 69 mm -Total dimensions: Ø 128 x 120 mm -Weight: 4.8 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punching die, punching punch, -Punching tool punch die with stripper -Punching dimensions: 15 x 60 mm square -Dimensions: 170/145/H235 mm -Weight: 14 kg Pedpfx Apjc Nlyysrspt

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm Ppsdpfjiqhiaex Apret -Type: Mubea 70 5-10 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, Ppodsiqhhkjpfx Aprjt -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 holder Ø 50 mm Ppodpfx Ajiqhhrjprjt -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Condition: good (used), collet chuck, tool holder, tool holder, milling chuck, milling tool, cutter head holder, milling mandrel, power chuck tool setting device, power chuck tool presetting device -Manufacturer: Oertlieb Gühring, power chuck for tool presetting device 2 pieces -Type: Ortlieb K5 / Gühring TGZ 38 GM300 -Individual components/dimensions: see photos -Price/Delivery: complete -Transport dimensions: 265/132/H175 mm Ppjdpfovm S Ibex Aprot -Total weight: 9.1 kg

Condition: used, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps Psdpfx Apouqf Tzjrjpt -Clamping tool: cranked clamp, 2 pieces -Clamping iron: 160/60/H55 mm -Groove: 55 x 23 mm -Slot nut: slot width 21/35 mm -Price/Delivery: complete -Transport dimensions: 160/120/H150 mm -Total weight: 4.9 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 90 mm -Type: Mubea 90 5-8 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 116 mm -Weight: 6.7 kg Ppsdpfx Aeiqhhnoprst

Condition: used, Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 90 x 90mm -Total dimensions: Ø 157 x 135 mm -Weight: 6.8 kg Psdpot Hmivsfx Apropt

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square 95 x 95 mm -Type: Mubea 95 holder Ø 50 mm -Die: Ø 200 mm Ppsdpfx Apjiqhhyoret -Total dimensions: Ø 200 x 122 mm -Weight: 11.6 kg

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch Ppjdpfsd Sf U Uex Aprst -2 pillars: punching tool -Dimensions: 170/100/H130 mm -Weight: 5.3 kg

Condition: used, 4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function -Admission imensions: 300/205/H445 mm -Weight: 100 kg Ppodpfodxnlfsx Aprst

Condition: used, Punch holder, die holder, punching tool, punch, punching die, punching punch Ppjdscwdmgspfx Aprjt -Die cut size: 9 x 25 mm -Groove between punch and scraper: 5 mm -Dimensions: 200/140/H170 mm -Weight: 12 kg