Used Vetter Ps5-4,0 for sale (402)

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Fodpst Hw D Rsfx Al Segh Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: new, Year of construction: 2025, total length: 1,880 mm, - Max. Personen auf der Plattform (innen/außen) 2/1 Fgsdpfx Aloy Hmgke Soh - Tragfähigkeit 227 kg - Tragfähigkeit – ausgefahrener Plattformausschub 113 kg - Verfahrbar bis max. Plattformhöhe 5,55m - Fahrgeschwindigkeit – eingefahren 4,0 km/h - Fahrgeschwindigkeit – ausgefahren 0,8 km/h - Steigfähigkeit – eingefahren 25%/14° - Wenderadius – innen/außen 0/1,37m - Hub-/Senkzeit 26/20 sec - Neigungssensor-Aktivierung (Längsachse/Querachse) 3° / 1,5° - Nichtmarkierende Vollgummi-Reifen 25,4 × 7,62 cm - Antriebsart 24V DC (2 × 12V 115Ah) - Tankinhalt Hydrauliksystem (E-Drive) 5,7 L - Max. Reifen-Traglast 570 kg - Reifenkontaktdruck 1.133 kPa - Bodenlast 12,14 kPa - Geräusch-/Schalldruckpegel (Boden) < 70 dBA - Geräusch-/Schalldruckpegel (Plattform) < 70 dBA - Vibration < 2,5m/s2

Condition: used, Year of construction: 1991, width of the strips 150 mm Fgedpoy Ty A Eofx Al Ssh band length 2.000 mm motor 400 V loading area 450 x 160 mm total power requirement 4,0 kW dimensions of the machine ca. 1,10 x 0,70 x 1,15 m - Serial-No.: 200.184

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Fodpfx Ajwp Ipxel Segh

Condition: used, Year of construction: 1995, turning diameter 560 mm turning length 1250 mm control Sinumerik 805 turning dia. over face-slide 340 mm spindle bore 63 mm spindle turning speed range 3 - 2500 U/min feeds - longitudinal 0,001 - 3 mm/U feeds - cross 0,001 - 3 mm/U rapid traverse longitudinal 7 m/min rapid traverse cross 3,5 m/min thread - mm pitch 0,5 - 140 mm thread - inch 1/4 - 56 Gang/ inch. thread - module mm Fgodpfx Aoymp Sujl Seh main drive 19 kW clamping length max. 2250 mm total power requirement 24 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 4,0 x 1,65 x 1,75 m controll Siemens 805, for cone turning, contour turning and threat cutting. Machine has MULTIFIX toolholder system size "C", steady and 3 jaw chuck.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 4 Standard slide units 1 Narrow slide units Fedpfjx Tuzcox Al Segh 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: new, Year of construction: 2020, operating hours: 45 h, load capacity: 1,300 kg, lifting height: 4,500 mm, fuel type: electric, mast type: triplex, construction height: 2,140 mm, Manufacturer + model: GENKINGER EGP 13/44 So = part of HUBTEX!! Mast: 3F4500 ID: 24053.0388 Fedpfx Aszv H R Ejl Sjgh Condition: New Mast: 3F4500 Forks: 1200/2000 mm Lowered height: 2140 mm Lifting height: 4500 mm Capacity: 1300 kg Year: 2020 Hours: 45 hours Capacity: 24 V / 345 Ah Options: VERY unique SPECIAL build, WIDE TRACK!!! - LIFTING CAPACITY 1300 KG @ 1200 MM - Equipped with a spreader!! - VETTER quick-release forks 1200 -> 2000 mm!! - PROPORTIONAL lifting and lowering valves - With cantilevered forks - SUITABLE for all types of pallets - Width between support legs 1340 MM!! POWER STEERING, in complete LIKE NEW condition!!

Condition: new, sheet width 3100 mm plate thickness 6,0 mm distance between columns 3.100 mm down holder 14 Stück no. of strokes 16 - 24 Hub/min oil volume 150 ltr. cutting angle 0,5 - 1,5 ° thickness at "Niro-steel" 4,0 mm column arm 350 mm engine output 11,0 kW weight of the machine ca. 7.060 kg range L-W-H 4,1 x 2,2 x 2,19 m ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guillotine shears Fgsdpjxabcqjfx Al Sjh - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: used, MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled Fsdpfouahw Tex Al Segh -Length: 5,3 m -Weight: 4,0 kg

Condition: used, Year of construction: 2000, grinding length 800 mm centre height 150 mm Control FANUC grinding wheel size max. 400 x 63 x 127 mm workpiece weight 120 kg engine output 7,5 kW turning speed range - grinding wheel 45 m/s m/s swivelling range +45/-15° Grad work piece spindle speed 22-313 / 51-750 U/min workpiece spindle swivable +/- 90 ° tailstock quill taper MT MK 4 x-travel 355 mm z-travel 4,0 mm Working speed 0 + 7,5 m/min weight of the machine ca. 4,0 t dimensions of the machine ca. BTH 3,7 x 2,2 x 1,9 m Fodpfeu Hag Nox Al Segh -incl. Coolant system -incl. Lynette -incl. Sharpening diamond -incl. open Lynette -incl. 3 pieces of grinding discs -incl. 3 pieces of flanges -incl. Internal grinding spindle attachments

Year of construction: 2008, condition: used, Receiver capacity 90 l 750 L/min Motor output 4,0 kW Used Machine Fodpjz Dkzzjfx Al Segh Year of Manufacture: 2008 Features and Technical Specifications: - Motor Connection: 400 V - Motor Power: 4.0 kW - Tank capacity: 90 L - Suction capacity: 750 L/min - Effective flow rate: 560 L/min - Cylinders: 2 - Speed: 1,450 rpm - Max. pressure: 11 bar - Weight: approx. 103 kg

Condition: new, Year of construction: 2023, total length: 1,400 mm, · Arbeitshöhe max. innen 7,55 m · Arbeitshöhe max. außen 6,57 m Fodpfx Alexd Emue Segh · Plattformlänge – außen 1,40 m · Plattformlänge – außen, ausgeschoben 2,00 m · Max. Personen auf der Plattform (innen/außen) 2 / 1 · Tragfähigkeit 227 kg · Tragfähigkeit – ausgefahrener Plattformausschub 113 kg · Verfahrbar bis max. Plattformhöhe 5,55 m · Fahrgeschwindigkeit – eingefahren 4,0 km/h · Fahrgeschwindigkeit – ausgefahren 0,8 km/h · Steigfähigkeit – eingefahren 25 %/14° · Wenderadius – innen/außen 0 / 1,37 m · Hub-/Senkzeit 26 / 20 sec · Neigungssensor-Aktivierung (Längsachse/Querachse) 3° / 1,5° · Nichtmarkierende Vollgummi-Reifen 25,4 × 7,62 cm · Antriebsart 24 V DC (2 × 12 V 115 Ah) · Tankinhalt Hydrauliksystem (E-Drive) 5,7 L · Max. Reifen-Traglast 570 kg · Reifenkontaktdruck 1.133 kPa · Bodenlast 12,14 kPa · Geräusch-/Schalldruckpegel (Boden) < 70 dBA · Geräusch-/Schalldruckpegel (Plattform) < 70 dBA · Vibration < 2,5 m/s2 · Standard-Blei-Säure-Batterie · Hinten eingelassene Steckdose für Ladegerät · Nicht klappbares Geländer, Schwingtür auf halber Geländerhöhe · Stromkabel zur Plattform ohne Fehlerstromschutz · Stromkabel zur Plattform · Senk-, Neigungs- und Bewegungsalarm · Plattform mit Riffelblechboden · Doppel-Blitzwarnleuchten · Elektronik Horn (Hupe) · Befestigungspunkte für Auffanggurte · Schutzabdeckung für Plattformbedienpult · Plattform-Lasterfassungssystem · Proportionale Fahr- und Hubsteuerung · SmartLink Zweizonen-Steuerung · Notablass zum Senken der Plattform · In voller Höhe verfahrbar · Elektro-Doppelscheibenbremsen an den Vorderrädern · Zwei AC-Fahrmotoren an den Vorderrädern (E-Drive) · Vorrichtung zum elektrischen Lösen der Bremsen (nur E-· Drive) · Vollintegriertes Diagnosesystem mit Batterieladungsanzeige · Lochfahrschutz · Seitliche und hintere Staplertaschen für einfacheres Umsetzen · Nichtmarkierenden Vollgummireifen · Tech Pro Link Anschluss · Verzurrpunkte und Kranösen

Condition: new, Year of construction: 2025, total length: 1,880 mm, - Max. Personen auf der Plattform (innen/außen) 2/1 - Tragfähigkeit 227 kg - Tragfähigkeit – ausgefahrener Plattformausschub 113 kg - Verfahrbar bis max. Plattformhöhe 5,55m - Fahrgeschwindigkeit – eingefahren 4,0 km/h - Fahrgeschwindigkeit – ausgefahren 0,8 km/h - Steigfähigkeit – eingefahren 25%/14° - Wenderadius – innen/außen 0/1,37m - Hub-/Senkzeit 26/20 sec - Neigungssensor-Aktivierung (Längsachse/Querachse) 3° / 1,5° - Nichtmarkierende Vollgummi-Reifen 25,4 × 7,62 cm - Antriebsart 24V DC (2 × 12V 115Ah) - Tankinhalt Hydrauliksystem (E-Drive) 5,7 L - Max. Reifen-Traglast 570 kg Fjdpfx Aloxd Emhe Segh - Reifenkontaktdruck 1.133 kPa - Bodenlast 12,14 kPa - Geräusch-/Schalldruckpegel (Boden) < 70 dBA - Geräusch-/Schalldruckpegel (Plattform) < 70 dBA - Vibration < 2,5m/s2

Condition: used, Technical details: welding current: 250 A Length: 815 mm height: 390 mm connected load: 4,0 kVA connected load: 4,0 kW Fgjdpjz Dt S Aofx Al Ssh open-circuit voltage: 16 - 32 V machine weight approx.: 104 kg

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Fgjdpfx Asv Iplajl Seh Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Operation via control panel and foot switch Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures *

Condition: used, Year of construction: 2004, Technical details: table length: 4000 mm table width: 2000 mm Max. sheet thickness: 100 mm table height over floor: ca. 860 mm total wight: 5,6 + 0,5 t dimensions LxWxH: 4,0 x 2,2 x 0,1 m Welding table / Pricing 0.50 EUR/kg with substructure and 6 base stands Fjdpfxeu Nkxue Al Segh *

Condition: used, Technical details: voltage: 380 V total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel Fjdpfx Asu Ngfdel Ssgh cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: new, sheet width 1000 mm plate thickness 8,0 mm distance between columns 1070 mm diameter of upper rolls 150 mm pre-bending capacity 6,o mm connected load 4,0 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,6 x 0,65 x 1,1 mm Fedefv H A Hspfx Al Ssgh - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V

Condition: used, functionality: unexamined, Year of construction: 2011, load capacity: 5,000 kg, Equipment: documentation/manual, Vetter m50-5.0 articulated boom crane. Lifting capacity: 5000 kg. Documentation in German. Boom reach: 5 m. Radio remote control. The crane is dismantled and ready for collection. Sold without warranty or guarantee. Fodpfxsz Ix Spj Al Sogh

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 500 kg, Vetter 500kg crane, with a reach of 2.5m from the pivot point. Lifting height under the bridge crane is 3.4m. Intermediate plate included. Sold without warranty or guarantee. Fodpfsz Ix U Rex Al Sjgh

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Fjdpjzdfb Hefx Al Ssgh Specifications: Capacity: 4,000 L Internal Pressure: 6 bar Internal Temperature: 130°C Jacket Pressure: 9 bar Jacket Temperature: 185°C Legs/Lugs: Lugs

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge and electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: P300 PROFI Crane System Year of manufacture: 2020 Machine type: Two-rail portal crane / workshop crane Description For sale is a used VETTER PROFI crane system, type P300, in a robust two-rail portal design with crane bridge, manual trolley, and electric chain hoist. The system was designed for industrial workshop operation and is ideally suited for assembly, production, mechanical engineering, maintenance, logistics, and material handling. The design complies with the crane classification HC2 / S2 according to EN 15011 and has a load capacity of 1,600 kg. Documentation, test book, and conformity documents are available. Technical data of the crane system Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Load capacity: 1,600 kg Crane classification: HC2 / S2 according to EN 15011 Operating mode: Workshop crane Control: Floor control Mounting: Composite anchor system Span: 5,100 mm Support spacing L: 5,590 mm Support spacing B: 5,100 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Beam length: 6,170 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal beam: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Steel structure group: 18/36/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Drive group: FEM 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Operating voltage: 400 V 3 PH / 50 Hz Fgodjzgtzlspfx Al Soh Control voltage: 24 V Manual trolley / travelling carriage Type: SiCO-HF 2000 A Design: Manual trolley Beam width: 66 - 220 mm Load capacity: 2,000 kg Self-weight: 17 kg Equipment - Two-rail portal crane system - Crane bridge - Electric chain hoist SIXX8AF - Manual trolley SiCO-HF 2000 A - Load hook - Floor control - Mains connection switch - Steel supports and beam structure - Composite anchor system - Documentation available - Test book available - EC declaration of conformity available Transport data Longest component: approx. 6.2 m Heaviest individual component: approx. 300 kg Total weight of the system, based on experience, approx. 2,000 - 3,500 kg Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Logistics Material handling Condition Used, functional, dismantled from ongoing operation. Optical condition according to pictures. Test book and technical documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Support and beam structure Floor control Mains connection switch Test book EC declaration of conformity Documentation Accessories according to pictures (Changes and errors in the technical data are subject to change.) Subject to prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Machine type: Two-rail portal crane / crane system Load capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. This system is suitable for assembly work, production, mechanical engineering, maintenance, workshop operations, logistics, and general lifting tasks in an industrial environment. Technical data Span: 5,890 mm Column spacing L: 5,590 mm Column spacing B: 5,890 mm Girder length: 6,390 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal girder: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Fodpfxszgv U Uo Al Ssgh Classification according to EN 15011: HC2 / S2 Steel construction group: 18/30/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection rating: IP55 Weight with 5 m lift: 65 kg Manual trolley Type: SiCO-HF 2000 A Year of manufacture: 2020 Load capacity: 2,000 kg Girder width: 66 - 220 mm Weight: 17 kg Equipment Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF 2000 A Floor control Main disconnect switch Steel column and girder structure Crane test book available Hoisting equipment test book available EC Declaration of Conformity available Assembly and operating manual available Shipping data Longest component: approx. 6.4 m Heaviest component: approx. 300 kg Condition Used System was installed and in operation. Documentation and test records available. Scope of supply VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Column and girder structure Control / operating elements Test books and documentation Accessories according to existing documents and images The machines, tools, and other items visible in the pictures, which are not explicitly described, are not included in the scope of supply. Shipping or freight shipping possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of Manufacture: 2020 Machine Type: Two-rail gantry crane / crane system Load Capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, and general lifting and transport tasks in the industrial sector. Technical Data Span of Crane Bridge: 5,890 mm Support Distance L: 5,570 mm Support Distance B: 5,890 mm Length of Runway Girder: 6,150 mm Length of Cross Girder: 6,260 mm Overall Dimensions of System: approx. 6,590 x 6,590 mm Bottom Edge of Crane Bridge: 4,085 mm Bottom Edge of Portal Girder: 4,507 mm Overall Height: 4,905 mm Ceiling Height according to Drawing: 5,185 mm Operating Voltage: 400 V / 50 Hz Control Voltage: 24 V Classification: HC2 / S2 according to EN 15011 Steel Construction Group: 18/36/30 Electric Chain Hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of Manufacture: 2020 Load Capacity: 1,600 kg Lifting Speed: 4.0 / 1.0 m/min Power: 1.50 / 0.37 kW FEM: 2m / M5 Protection Class: IP55 Duty Cycle: 40 % Number of Load Chains: 2 Weight with 5 m Lift: 65 kg Manual Trolley Type: SiCO-HF 2000 A Load Capacity: 2,000 kg Girder Width: 66 - 220 mm Weight: 17 kg Equipment Crane Bridge Electric Chain Hoist SIXX8AF Manual Trolley SiCO-HF 2000 A Load Hook Floor Control Main Disconnect Switch Cable Festoon / Power Supply Steel Support and Girder Structure Inspection Book Available EC Declaration of Conformity Available Assembly and Operating Instructions Available Transport Data Longest Component: approx. 6.3 m Heaviest Single Component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of Delivery VETTER P300 PROFI Crane System Crane Bridge Electric Chain Hoist SIXX8AF 1.6 t Manual Trolley SiCO-HF 2000 A Support and Girder Structure Fgsdpjzgvx Tofx Al Ssh Control / Operating Elements Main Disconnect Switch Documentation / Inspection Book EC Declaration of Conformity Assembly and Operating Instructions Accessories as Shown in Pictures The machines, tools, and other items visible in the pictures that are not explicitly described are not included in the scope of delivery. Shipping or freight transport possible. Subject to changes, errors and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: NOH388/45, 1 Vetter / Demag wall-mounted swivel crane, 250 kg payload / lifting capacity Type AW2.5-7.0 Reach approx. 7m, 250 kg / 0.25 t payload with Demag DC chain hoist, 250 kg payload (2 lifting speeds) Crane available in quantity 2!!! Total weight approx. 450 kg Year of manufacture 2004, with inspection certificate Complete with wall brackets, jib, chain hoist, cable carrier, undercarriage and small parts Swivel range approx. 180° Item location: 75053 Gondelsheim Fedpexmd Rdsfx Al Ssgh System is completely disassembled and immediately available See pictures Shipping by freight forwarder or collection Please inquire about shipping costs based on your postal code.