Used Vinyl Press / Lp Press for sale (13,636)

Condition: refurbished (used), Year of construction: 1994, machine/vehicle number: HFBO 125 30 H40402, stroke length: 3,000 mm, Fully refurbished in 2019, AMADA PROMECAM 125.3 press brake, year of construction 1994. Excellent Condition. Pjdpfx Asy Nibcspvjpt If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2004, Used conventional press brake by Baykal Ppsdpfxsy Tuiyo Apvet Type APH 3110 180 Capacity 3100 x 180 tons Adjustable back gauge and stroke adjustment Amada / Euro clamping system Includes 1 set of tooling

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, form gluing, form veneering, edge gluing, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. New heat-resistant silicone membrane, extremely flexible and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410 mm, usable area approx. 2800 x 1300 mm Working height approx. 900 mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks, each 200 liters, for comfortable operation and rapid evacuation. Podpfx Apjy Hl Hpevjpt Electronic vacuum pressure switch, so the pump switches off when the target negative pressure is reached and does not run continuously. Movable on four swivel castors, lockable Frame can be easily folded open, secured with two latches Double frame for quick replacement of the membrane. Currently, a new silicone membrane is installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been touched up. The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020 mm (L x W x H). Weight approx. 550 kg. The machine can be demonstrated on request at our premises after arranging an appointment. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this provider."

Condition: excellent (used), Year of construction: 2012, working area X .. 370 mm working area Y .. 700 mm pressure 28.0 t plate thickness max. 12.7 mm ST throat 310 mm height of stroke 0 - 40 mm no. of strokes max. 180 Hub/min punch diameter max. 105 mm 845 x 1420 mm work height max. 900 mm oil volume 50.0 l total power requirement 5.0 kW weight of the machine ca. 1800 kg range L-W-H 1800 x 1200 x 1500 mm New price including accessories approx. 35,000 euros Special price on request !! The machine was used continuously in a test area and as a result has very few operating hours !!! The ECCO LINE hydraulic punching machine has been specially optimized for the processing of sheet metal and profile parts. It is characterized by its The machines of the ECCO LINE series are equipped with a punching force of LINE series are equipped with 28 tons of punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 sec (manual) Ppsdpfx Aoy Umdfopvot Mode of operation: After installing the tool, the stops are positioned in X and Y are positioned accordingly and the material is pushed against the stops. By the hole is then punched by pressing the foot pedal Features of the machine: - Maintenance-free hydraulic drive - Stepless stroke adjustment - Compact unit - Constant punching force Features: - Robust electro-hydraulic hole punch - TRUMPF tool system with many insert tools - Stop system with digital displays * Magnetic scale integrated into the side of the machine table * Scanning head integrated in the stops * Energy guiding chains for supply line to the scanning head * Evaluation electronics * Position indicators mounted on the stops * Stake-out device for zeroing the axes * Readout accuracy /- 0.1 mm - Control panel: set-up, single and continuous stroke - Stepless stroke height adjustment - Free-moving foot switch * with many punching tools !

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: You will receive a 24-month warranty with this machine. On request, we can also offer you a suitable loading ramp, a photoelectric cell for black detection, or the appropriate machine stretch film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby fully eliminating the “human factor.” As space-saving as a pallet wrapper with a horseshoe turntable and as robust as a closed system – these are the advantages of this machine, put in a nutshell! The electromagnetic brake allows you to precisely store the film tension for each program step (foot wrapping, upwards wrapping, head wrapping, downwards wrapping). Within the parameters of each program, you can also adjust the speed of the film carriage and turntable. Head wraps, foot wraps, and film overlap at the pallet end can each be programmed individually. This way, you can store customized programs for every packing scheme to achieve optimal wrapping results. Programs can be password-protected so that operators can only select from pre-set programs. Weighing 500 kg, this model is designed for loads up to 1200 kg. Our Profiline LP comes with a 1650 mm turntable as standard and can wrap pallets up to 2500 mm in height. Automatic pallet detection (via photoelectric cell) is standard, as are adjustable top and bottom wraps. This model is our recommendation if you have limited space but require a professional and robust pallet wrapper that can be optimally adapted to your needs. Would you like a higher mast, film pre-stretch, or an automatic film cut-off? Almost anything is possible with this machine! We are happy to configure this machine as a new unit with options perfectly matched to your requirements. About us: We believe that business is made between people! A supplier delivers the goods you order – a partner does more: they help you find the best products, support you in achieving your goals, and stand by you in case of problems and challenges! That is our conviction. Ppodszaangspfx Apvot For over 40 years and through four generations, we have been the partner of mid-sized companies for all matters concerning 'stretching and sealing.' Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results thanks to up to 32 storable programs. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". As space-saving as a pallet wrapper with a horseshoe plate and as robust as a closed system system - these are the advantages of this machine in a nutshell! Pjdpfszaanasx Apvjpt With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. The programs also allow you to set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 500 kg, this model is designed for loads of up to 1200 kg. Our Profiline LP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. This model is our recommendation if you have limited space but require a professional & robust pallet wrapper that can be optimally adapted to your needs. adaptable to your needs Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: good (used), Year of construction: 2006, Used 3-meter Bystronic press brake Ppodpfxoy Tml Ho Apvet Type: PR 150 3100 Capacity: 3100 x 150 tons Y1, Y2, X, R, Z1, and Z2 CNC-controlled Cybelec ModEva 12 CNC control Hydraulic RFA top clamp Hydraulic Wila 13mm bottom clamp Includes 1 set of tooling as shown Year of manufacture: 2006

Condition: excellent (used), Year of construction: 2021, operating hours: 44 h, functionality: fully functional, HSM V-Press 860 plus vertical baling press, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 44 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 m³/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offers are non-binding, subject to prior sale and may be revoked at any time. Inspections are possible by arrangement. The sale takes place at our location, without warranty. Our payment terms are 100% prepayment. Ppsdpfx Asy Uvt Aepvot

Condition: repair required (used), Year of construction: 2003, REP rubber injection press 25 Tons Ppodeizi H Hspfx Apvst Year : 2003 The 4 columns are to be changed (9000€ of expenses)

Condition: ready for operation (used), Year of construction: 2002, Very well-maintained, used press brake from Darley. Type: EHP LS 230 43 37 Psdpfx Apjy Sziksvjpt Capacity: 4300 x 230 tons Delem DA 66W CNC control CNC crowning Y1, Y2, X1, X2, R1, R2, Z1, and Z2 axes CNC controlled Hydraulic Wila New Standard top and bottom clamping Includes 1 set of tooling as shown in the picture.

Condition: good (used), Rear back gauge fingers for Promecam press brakes, adjustable in height. Ppsdozagq Uspfx Apvot Sold as a complete set or in pairs.

Condition: used, Year of construction: 2001, operating hours: 2,500 h, total length: 3,540 mm, total width: 1,500 mm, total height: 2,330 mm, Colour: Grey Weight: 8.230 kg - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 5356 - Operating hours: 2500 - Drive system: Conventional - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 160 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 200 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3540mm x 1500mm x 2330mm (l x w x h) - Transport weight [kg]: 8230kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ppedoy Thmxopfx Apvet Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2004, Injection molding machine NEGRI BOSSI V1250 Podpfx Apjw Uaw Djvjpt 1,250 tons Year: 2004 Operating hours: 32,000 New screw and barrel

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Pjdpfx Apsy S Ru Aovspt Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, year of last overhaul: 2026, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Ppjdpey S Rtlefx Apvjt Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Pedpfx Apey S Rqwsvjpt Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: used, Heidelberg GTOVP52 Straight 4 or 2 + 2 Maximum sheet size: 360 x 520mm Minimum sheet size: 105 x 180mm Varn Alcohol dampening system 77 million impressions Serial Number: 690392 Ppodpfx Aey Sxzwspvot Parts and operator manuals for Machine and Varn dampening system Good running order Price: EURO 13,750 loaded and packed into container or onto truck

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Podezacgrjpfx Apvept Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: excellent (used), Year of construction: 2006, Dimension: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Ppjdpfxezacd Re Apvst Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1994, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Ppedpfx Apjzaccmsvst Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Ppsdpfxjzacb Ns Apvet Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Item: NO-2003-Dairy-Cheeseplant Complete Dairy Cheese Plant Consisting of: - 3 pc Damrow Double-O cheese vats volume 12.000 liter. 2650 x 4000 x H 3150 mm - 1 pc Gadan Prepress unit with cutting and filling curd to moulds. Ppjdskzk Ddspfx Apvjt 2200 x 10.000 x H 2600 mm - 1 pc Gadan Final Cheese Press with moulds 280X340 mm 2700 x 9300 x H 1800 mm - 1 press stand for pre-presser 3100 x 3900 x H 3700 mm - 1 intermediate station 2200 x 2700 x H 3150 mm - 1 pc Unit to take out cheese from moulds. 550 x 2150 x H 1400 mm - 1 end station 1600 x 3260 x H 2750 mm Equipment has been running until week 10 and will be dismantled starting week 16-17 Can also supply Brine system. We can dismantle and pack complete plant in Container/Trucks See attached pictures and video

Condition: good (used), Year of construction: 1999, Pneumatic press make SCHMIDT Type:ZHS-2/22 year 1999 with two-hand operation. Podpfxoiduvce Apvspt UVV until 2023.

Condition: ready for operation (used), Year of construction: 1994, Brand: HSM Model: 155 VL Year of construction: 1994 Pressing force: 157 kN Voltage: 400 Max. bale weight: 250 kg Bale dimensions: 110 x 70 x 95 cm Machine weight: 950 kg Podpfx Aoy Uwnnopvept Machine dimensions: 144 x 100 x 234 cm Feed opening dimensions: 110 x 59 cm

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Psdpfx Apeymn Hwjvept Kind regards, Henk Hoos.