Used Vinyl Press / Lp Press for sale (13,476)

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Dedpfx Aljxfwdj Seku Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Year of construction: 2015, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology Dsdpjz D Tnwofx Al Soku - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: reconditioned (used), Year of construction: 2015, Presto HAN10R Year of manufacture: 2015 2 units immediately available Dsdsz E U Twspfx Al Sjku Skip loader container 10 cubic meters usable volume Top-hinged discharge door Two-part lid, opening to the left/right above the filling opening Prepared for ramp operation Technically refurbished, inspected, and serviced Painted in RAL6018 We will gladly prepare an offer including delivery.

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG75/D K/RT50 Pressurized water temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial applications in plastics processing, especially for the temperature control of injection molds and other process tools. Manufacturer's serial number: 102010170001, Year of manufacture: 2009 Temperature: max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 100 l/min Dkodpfx Aoz Au Hbjl Ssu Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooling unit) Pump motor power: 1.5 kW Continuous sound pressure level

Condition: good (used), Year of construction: 2002, functionality: fully functional, filter area: 48 m², filter pressure: 15 bar, pressure: 380 bar, cake thickness: 25 mm, total width: 1,500 mm, total length: 4,800 mm, total height: 1,980 mm, overall weight: 4,600 kg, number of chambers: 44, Equipment: documentation/manual, safety light barrier, For sale is a chamber filter press with the following accessories: Hydraulics, filter plates, safety devices, control system, swing plates, Dksdpjzulf Ssfx Al Ssu feed pump, press frame (steel platform), 3 cake containers for forklifts. Chamber filter press 800 Side-frame press 15 bar filtration pressure Approx. 540 liters Open filtrate discharge 800x800 PP 25mm chamber depth 44 chambers Approx. 2.5 meters useful length Length 4800 x Width 1500 x Height 1980 mm 4600 kg Price upon request. We would be happy to provide you with an individual offer.

Condition: used, Year of construction: 1998, machine/vehicle number: 40225, functionality: fully functional, bending force (max.): 225 t, control type: CNC control, actuation type: hydraulic, Hydraulic CNC press brake from the brand HACO, model 40225, year of manufacture 1998. The machine has a nominal pressing force of approx. 225 tons and a working width of approx. 4,000 mm. Equipped with CNC control and electric backgauge, suitable for precise bending of steel and other sheet materials. Features European tool clamping system. Suitable for heavy-duty sheet metal processing in an industrial environment. The machine is offered in used condition. Dodpfx Aloyhxtuj Sjku

Condition: excellent (used), Technical specifications: Working length: 4100 mm Frame width: 3650 mm Dodpfx Aljz E A Sue Sjku Press force: 220 tons CNC control: OPERATOR OPII graphic Color screen size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back gauge Overhang: 300 mm Stroke: 180 mm Automatic crowning Motor power: 17 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: New AMADA tools Condition: The machine is in very good overall condition. Retrofit in January 2026. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Technical details: pressure: 2 t passage: siehe Text mm stroke: siehe Text mm Pressing power: ca. 2 kN 5 pcs abor presses No. 2: throat 105 mm; distance ram-table 95 mm; ram stroke 36 mm; table L:120 x w:140 mm; weight 17 kg; dimesnions L:270 x W:220 x H:420 mm No. 3: throat 90 mm; distance ram-table 190 mm; ram stroke 45 mm; pressure force 3 kN; ram stroke adjustment travel 150 mm via hand wheel; table size : L:120 x W:160 mm; weight 26 kg; dimensions without wooden stand L:235 x B:160 x H:730 mm No. 4: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel ; table size L:110 x W:160 mm; weight 30 kg; dimesnions without wooden stand L:230 x W:180 x H:700 mm No. 5: Dodpfx Aju N Ay Rjl Sjku throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel; table size L:110 x W:160 mm; weight 30 kg; dimensions without wooden stand L:230 x W:180 x H:700 mm, incl. device No. 7: throat 130 mm; distance ram-table 95 mm; ram stroke 20 mm; parallel clamper guided with 2 bolts with a return spring ; table size L:50 x B:80 mm; weight 17 kg; dimensions L:330 x W:160 x H:380 mm, incl. punch device *

Condition: used, Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1350 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2000 mm Slide area: 3500 x 2000 mm Die cushion capacity in table: 150 ton Die cushion stroke: 200 mm Die cushion pad area: 2700 x 1500 mm Number of strokes: 7 - 21 s.p.m. Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Required power: kW Height over floor approx.: 8600 mm Weight of machine approx.: 250 ton Dkodpfx Aoz Hi Rgjl Ssu Standard configuration LINK DRIVE

Condition: good (used), Year of construction: 1989, machine/vehicle number: 18052, functionality: fully functional, pressing force: 3 t, stroke length: 500 mm, distance table to ram: 500 mm, total length: 700 mm, total width: 300 mm, total height: 780 mm, overall weight: 185 kg, Dornpresse Ageo DP3000R in good, fully functional condition. Technical specifications can be found in the last image. Dksdpfjz Hlplox Al Sou

Condition: new, pressure 60 t stroke 400 mm daylight longitudinal/sideways 820 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 6,1 mm/sec feed up 10 mm/sec Motor output 2,2 kW weight of the machine ca. 0,675 t dimensions of the machine ca. 1,2 x 0,85 x 2,1 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking Dodegg Nn Sjpfx Al Sjku

Condition: excellent (used), Year of construction: 2020, operating hours: 18 h, functionality: fully functional, HSM V-Press 610 baling press Year of manufacture: 2020 Operating hours: 18 h Bale counter: 61 bales Machine is fully functional, inspected, and serviced. Technical data: Pressing force: 120 kN Specific pressing force: 25 N/cm² Drive power: 3 kW Voltage / Frequency: 400 V / 50 Hz Cycle time in idle mode: 22 s Pressing capacity in idle mode (theoretical): 2.5 m³/h Filling height: 655 mm Width x Height of the filling opening: 800 x 495 mm Bale length x Bale width x Bale height: 800 x 600 x 600 mm Bale weight (up to): 100 kg Dksdpfsz H R T Aox Al Sou Width x Depth x Height: 1198 x 823 x 1986 mm Weight: 540 kg Type of strapping: Vertical Number of straps: 3 Type of consumable material: Strapping band

Condition: ready for operation (used), Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Dodpfxowqr R Ae Al Seku Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer Dkedpfx Alopvk Dis Seu

Condition: good (used), Code: 0374 Brand: ITALPRESSE Model: V/4 Mechanical cold press for wood, panels, doors, furniture, composite materials, technical materials, plastics, aluminium and various other materials Working dimensions 2200 x 1000 mm Platen dimensions: n° 2 platens 1100 x 1000 mm NEW aluminium sheets Option to work on a single table or on separate tables Opening 650 mm Dedpfsy If Rwex Al Ssku N° 4 pressure screws N°2 motors 0,75 Hp each Overall dimensions mm 2550 x 1000 x 1650 h Weight kg 870

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DELEM DA 69T control system The machine was distributed by Knuth and manufactured in Turkey. Press force 135 t Bending length 3,100 mm Distance between uprights 2,600 mm Overhang 410 mm Stroke 265 mm Opening width 485 mm Table width 108 mm Dkjdpfoz Hmxuox Al Sou Travel of X-axis 700 mm Rapid traverse 120 mm/s Bending speed 9 mm/s Return speed 95 mm/s Drive power Main drive 15 kW Hydraulic tank volume 250 l Dimensions (L × W × H) 3.95 × 1.95 × 2.81 m Weight 9,000 kg Some punches and dies are included in the scope of delivery (see pictures). Inspection with the machine running is possible.

Condition: excellent (used), Manesty D3B tablet press Dkodsiy Nn Iepfx Al Sou Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph

Condition: good (used), Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Djdpfx Alswk Ntze Ssku Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emergency push button Overall dimensions mm 2250 x 1700 x 3300 h Weight kg 9000

Condition: good (used), Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Dkjdpsxmhcdofx Al Sju Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4

Condition: good (used), functionality: fully functional, overall weight: 32 kg, Gechter 8/12 kN HKPV toggle press Djdpfx Asz Iraael Seku Adjustment range: 220 mm Overhang: 120 mm Table: 200 x 167 mm Mounting bore: Ø10 H7 Other models are also available. Shipping via GLS parcel service, freight forwarder, or collection in 06112 Halle is possible. Sale to commercial customers only, with exclusion of warranty.

Year of construction: 2026, condition: new, functionality: fully functional, COLUMBUS PIONEER – Modular Vacuum & Membrane Press with Lifetime Guarantee The COLUMBUS Pioneer is the professional solution for joineries and woodworking shops looking to produce flexibly and invest securely for the long term. Ideal for: * Veneering * Form gluing * Laminating * Thermoforming * Solid surface materials * Curved workpieces Your benefits: * Modular system – can be expanded at any time * Lifetime guarantee on the machine frame * Robust industrial construction * Columbus 360° included: Master Manual + AI support * Premium components from BECKER, FESTO, and SIEMENS * Simple operation and high reliability Features: * Quick-change membrane system * Natural rubber membrane rated up to +130 °C * Adjustable vacuum pressure from 400–900 mbar * Connection for external vacuum bag * Sturdy phenolic resin work surface Dsdpez Izrfefx Al Seku * Smooth-running swivel casters Available sizes: * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm COLUMBUS has been developing vacuum technology for professional users for 50 years. Viewing and consultation available by appointment.

Condition: good (used), Year of construction: 1993, operating hours: 4,313 h, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 6,100 mm, throat depth: 300 mm, distance table to ram: 500 mm, clearance between the columns: 5,500 mm, oil tank capacity: 350 l, overall weight: 26,000 kg, Max. pressing force: 320 t Bending length: 6100 mm Distance between uprights: 5500 mm Control system: MNC 95 c Maximum ram stroke: 250 mm Max. distance table/ram: 500 mm Overhang: 300 mm Table width: 250 mm Closing speed: 80 mm/s Dsdsz Iy U Sopfx Al Sjku Working speed: 7 mm/s Return speed: 70 mm/s Oil capacity: 350 l Operating hours: 4312 h Voltage: 380 V / 50 Hz Total power consumption: 22 kW Machine weight approx.: 26 t

Year of construction: 2026, condition: new, COLUMBUS PIONEER – The Modular Professional Vacuum Press for Flexible Joineries More possibilities. More applications. More future security. The COLUMBUS Pioneer is not just a vacuum press, but a well-designed complete system for modern joineries and woodworking businesses. Ideal for: * Veneering * Form bending * Laminating * Thermoforming * Solid surface materials * Curved and complex workpieces Why choose COLUMBUS? Many businesses discover completely new uses and additional orders within a short time because the Pioneer makes jobs economical that were previously turned down. Your advantages: * Modular system – grows with your business * Lifetime warranty on the machine structure * Heavy-duty industrial construction for decades of use * Columbus 360° included: Practical expertise, master manual, and AI support for maximum application safety * Premium components from BECKER, FESTO and SIEMENS * Simple operation and reproducible results Equipment: * Quick-change membrane system * Highly elastic natural rubber membrane up to +130°C * Pressure regulation from 400–900 mbar * Connection for external vacuum bag * Sturdy phenolic resin worktop * Smooth-running swivel castors Djdpsz Iz Dbjfx Al Seku Available sizes: * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm COLUMBUS has been developing vacuum technology for professional users for almost 50 years. Viewing and personal consultation available by appointment.

Condition: used, Format: 0x0 Dedpfx Alex Rh D So Soku Equipment: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Condition: good (used), pressure 100 t punching cross-cut in cmm 40.0 in 22.0 mm ST stroke 120 mm column arm 760 mm total power requirement 8.5 kW weight of the machine ca. ca. 3.800 kg dimensions of the machine ca. ca. 2500 x 1700 x 2000 mm Original price, including stop system: approx. 45.000 euros Dksdjzn Ahkopfx Al Seu Special price available upon request Features: - Robust / heavy-duty hydraulic hole punch - Punch stroke continuously adjustable - NC stop system "MUBEA MATIC 82" * Travel range in X and Y axes * With "FAGOR" control unit * Includes large support table * Separate control cabinet - Various (custom) punching tools (see Figure 9) - Front safety guard, including sheet metal scraper - 1 freely movable foot switch - Operating instructions for machine and stop system