Used Vogelsang Push-Back Stelling for sale (4,175)

Condition: used, Year of construction: 2015, - Feed rate: maximum 40 m/min - Motor power: 5.5 Kw - Working length: 7.35 meters Miter saw Manufacturer: Tigerstop Type: UKA 600 Year of manufacture: 2015 Tiger UKA 600 miter cutting system consisting of: Tiger Stop 7.5 automatic feed and stopper Overall length: 7.95 meters Working length: 7.35 meters Net working length (automatic saw): 6 meters Voltage: 220 volts 50 Hz Motor power: 0.45 Kw Feed rate: maximum 40 m/min (depending on the load) Accuracy: +/- 0.4 mm as a sliding guide. Infeed table for TigerStop 6.8 Overall length: 7.4 meters Table width: 325 mm Upward stroke miter saw model UKA 600 with pneumatic lift and clamping device Saw unit mounted on a rotary table with diameter: 980 mm Diameter of the saw blade: 600 mm Cutting capacity: 165 x 240 mm at 90 degrees Maximum cutting height: 165 mm at the fence and 175 mm diameter (at 90 degrees) for round material Cutting angle: 30 - 90 - 30 degrees 45 - 90 - 45 degrees with automatic function Motor power: 5.5 Kw Voltage: 400 volts 50 Hz Working height: 920 mm The machine is controlled by a push button for semi-automatic operation or fully automatically for 90-degree angles via the TigerStop. The rotary table is controlled by a Tigerstop servo drive TigerDrive. Outfeed/infeed table with side protection Length: 3.7 meters Width: 325 mm PC control with Beamworks program, computer with touch panel and computer cabinet. Cutting list download option for csv file. Extension with 6-strand flipper loading device Fpsdpfx Aozuyx Hsaysl For automatic loading of material with a length of 500 - 6000 mm. Shorter pieces can be placed directly on the infeed table. Loading device consisting of: 6 flipper beams with tables including the 2 aluminum profiles 80 x 40 mm per beam, the flippers, the connecting tube, 1 pneumatic cylinder with 24-volt valve. The net loading length is approximately 1.38 m. 1 additional support strand without flipper on the outside of the loader 2 extra cylinder set for the loading device Complete electrical control cabinet with PLC, power supply, Emergency stop safety relay, complete wiring etc. (Including additional electrical wiring for the safety fence door) Label printer package for Beamworks Safety fence on the back of the machine, only on the infeed side. Including entrance door with safety lock And additional protective device on the front to prevent intrusion between the loading strands. Product length measurement with sensor in the protective cover, controlled by the Tigerstop control. The length measurement and download with Tigerlink only work with 90-degree cuts. Tigerlink download software for downloading a csv file (cutting list). Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Year of construction: 2015, condition: new, functionality: fully functional, machine/vehicle number: 016, We offer this new Kohlbacher STINGRAY Stellite tipping machine for band saws, year of construction 2015. Manufacturer: Kohlbacher GmbH Model: STINGRAY Serial number: 016 Fpodpfx Aezuc Ttoayel Construction date: 03/2015 Technical details: - Plasmawelding (TIG) - Fully automatic tipping. - Melts hard facing material in copper mould that are preformed to suit the teeth of the saw blade. - Anealing with gas or inductive. - for any type of tooth shape or division, and variable pitch assemble. - width of band saw blades 50-380 mm - Blade thickness 0,6 – 5 mm - Pitch adjustable 20 – 100mm - Working speed adjustable 0 – 20 Teeth/min. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: reconditioned (used), Year of construction: 2020, The DMK 20 C table cutter is the ideal solution for small to medium-sized meat processing businesses, upscale gastronomy, as well as large kitchens and catering, due to its compact, robust, and precise design. Its well-engineered construction offers users virtually unlimited versatility in all application areas. The machine is equipped with two independently operated, powerful motors, providing a wide range of control options. With the optional robust, mobile base frame, the desired mobility is ensured. You will receive an invoice with VAT shown. Our used equipment service for you: • 6 months warranty on electrical components, limited to the replacement of defective parts, excluding removal and installation costs • High-quality branded equipment at fair prices • Professional overhaul, inspection, and expert cleaning • Tested and fully functional – or your money back • Flexible shipping or self-collection options • Expert advice – before and after purchase • Provision of operating instructions, wiring diagrams, and spare parts • Safety inspection in accordance with DGUV V3 Professional engineering in a compact space: The DMK 20 C2 table cutter is distinguished by its exceptionally smooth and low-vibration operation, even at high speeds. The elaborate manufacturing of each component is carefully and precisely matched. The thick-walled cutter bowl, cast from high-quality stainless steel, provides extremely accurate concentricity, enabling tight adjustment of the cutting blades within the bowl radius. Small cutter, big performance: The powerful motors deliver the highest torque, even with challenging materials. Vibration-damping machine feet, the heavy, double-walled cutter lid, and the Plexiglas noise reduction cover all significantly reduce operational noise and emissions. The clearly arranged control panel with push buttons and the easily readable analog thermometer ensure efficient operation with a broad spectrum of applications. Machine features: • Completely stainless steel construction • Massive cast stainless steel bowl (Bowl capacity: 20L) • High-precision, maintenance-free cutting system • Stainless steel knife head with 6 blades • Tight cutting tolerances within the bowl radius • High stability • Extremely low-vibration operation • Vibration-damping machine feet • Plexiglas cutter lid • Analog, clearly readable thermometer • 6 stainless steel knives, 7 stainless steel spacer rings, two bowls Drive & Controls: • Separate knife shaft drive with electromagnetic brake • Brake release function via push button for cleaning purposes when the lid is open • Separate bowl drive with directly mounted, maintenance-free gearbox Fpsdpfx Aoyx A Rieayol • Two speeds, independently switchable • Large, easy-to-use push buttons with easy-to-clean protective covers Technical specifications: • Bowl volume: 20L • Usable fine sausage emulsion capacity (approx. kg): 16kg • Number of knives: 6 • Speed (rpm): 1500/3000 • Knife shaft power (kW): 3.3/4.5 • Mains voltage (V): 400 • Control voltage (V): 24 • Fuse: (A) 16 (slow-blow) • Dimensions (W x D x H): 83cm x 80cm x 115cm with mobile base on castors • Weight: 260 kg • Serial number: S18092 • Year of manufacture: 2020 • Model: DMK 20 C2

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 73.331.611.504, functionality: fully functional, power: 18.5 kW (25.15 HP), pressing force: 175 t, stroke length: 265 mm, throat depth: 450 mm, working width: 3,050 mm, TECHNICAL DETAILS Press force: 175 t Max. working width: 3,050 mm Frame distance: 2,600 mm Overhang: 450 mm Max. stroke: 265 mm Crowning system: CNC-controlled Number of axes: 3 Axes: Y1, Y2, X Back gauge depth: 1,000 mm Ram holder: Standard Fodpfx Aszxcf Roayopl Tool holder type: European Style MACHINE DETAILS Drive system: CNC Control system: Durma Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 4,250 x 1,950 x 2,700 mm Weight: 10,520 kg Transport packages: 1 EQUIPMENT Tools CE marking

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing cycle with workpiece clamping, sawing, and lifting to the set height after the cut is completed. Stepless hydraulic control of cutting pressure and feed rate on the back of the saw blade. This ensures optimal conditions for every sawing task, i.e., constant pressure for solid material and constant feed rate for thin-walled profiles. Particularly suitable for universal use with different cross-sections, materials, and frequently changing miter cuts. The machine control complies with CE standard 89/289. Technical data: round/flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 This model can also be supplied with double miter capability as model 320 DG! Rapid lowering of the saw frame via push button to the material edge. Manual miter adjustment from 90° to 30°, stepless according to scale. The miter pivot point is the intersection between the saw blade and the fixed clamping jaw, thus no change in the length dimension when changing the angle. Hydraulic full-stroke workpiece clamping - CETOP hydraulic system. At every angle of the saw frame, the material is clamped parallel at 90°. Complete coolant system with electric submersible pump. Central machine operation. Saw blade drive with end-of-travel shut-off. Movable blade guide arm, adjustable to material width. Saw blade deflector rollers with carbide guide. Chip-cleaning brush, rotating with the blade. Saw blade tension with torque wrench. Paint finish: silver gray / blue gray (RAL 7001 / RAL 7031). Remaining piece length: 25mm. Cutting speed: AC frequency-controlled drive, 15-150 m/min, steplessly adjustable at the control panel. Drive: Saw blade 3.0kW; 400V, 50Hz. Hydraulics 1.1kW. Coolant pump 0.1kW. Saw frame feed: Fedpfxehppabe Aayepl Stepless up to 300mm/min, hydraulically controlled. Saw blade tension: Mechanical with torque wrench. Saw blade dimensions: 4200x34x1.1mm. Working height: 750mm (without mounting elements). Weight: 850kg Dimensions (LxWxH): 1300x2050x1400mm The following options are available: Laser light Micro-spray device Clamping pressure regulator Support table on the feed side.

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data Fedpfxezzz Ivs Aayopl - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, In - Line Vertical Borer for Solid Rail Components etc Heavy duty steel welded frame 4 no Vertical Heads with Single Drills 2 no Vertical Heads with Triple Drills Motor power 3hp each. Pneumatic control for drilling stroke All heads adjustable along X axis via rack and pinion movement. Scale for positioning. Max. drilling between outside heads 1600mm. All heads with cross slide support & adjustment in / out Fpsdezd Ur Hepfx Aayol Adjustable depth stroke to heads 5 no Pneumatic clamps - adjustable in lateral positioning. Two hand push button safety control.

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. Fpedpfxjzd Uv Es Aayjl 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: used, This offer includes 3 cutlery and tray trolleys from the manufacturer Rieber, model PO-SV1/1. !!! We need space!!! Our special price: €995 gross The plastic cutlery containers show minor damage. Each trolley comes equipped with 37 trays (Total: 111 trays). Cutlery is also included (see photos). You will receive an invoice with VAT stated separately. Our used equipment service for you: - 6-month warranty on all electrical components, limited to replacement of defective parts (excl. labor for installation/removal) - High-quality branded equipment at fair prices - Professional refurbishment/inspection and expert cleaning - Tested and fully operational – or your money back - Flexible options for shipping or self-collection - Competent advice before and after purchase - Provision of operating manuals, wiring diagrams, and spare parts - Inspection according to DGUV V3 Technical data: Dimensions (W x D x H): 730 x 690 x 911 mm Platform dimensions (W x D): 412 x 555 mm Basket/tray dimensions (W x D): max. 530 x 400 mm Weight: 43 kg Maximum load: 200 kg Constructed from stainless steel With one platform Anti-tilt and anti-jamming guide system Spring tension adjustable depending on dish/tray weight Safety push handle 4 bumper corners Rust-free casters in accordance with DIN 18867 Part 8 2 swivel casters and 2 locking swivel casters (Ø 125 mm) Stacking height: approx. 575 mm Condition: used, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have questions, need advice, or want to view the item on-site? Contact us by phone during our business hours: Monday–Friday: 09:00 – 13:00 and 14:00 – 17:00 Fpedpey Hh R Defx Aayel Sale is subject exclusively to our general terms and conditions (GTC).

Condition: used, mileage: 22,000 km, power: 353 kW (479.95 HP), first registration: 06/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,740 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Fpjdpfxjx Rv Raj Aayel Internal number: #348 MAN TGS 26.480 6x2 -4 BL with combined high-pressure flushing and suction-pressure tank body ADR Type K 14.0 / 28 PE Body KROLL Fahrzeugbau-Umwelttechnik Gmb * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach stop side 5,200 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tanker type K 14.0 / 28 PE * Extension piston with 3 locking points * (3,300 l water/10,600 l sludge, 5,500 l water/8,200 l sludge, 7,700 l water/6,000 l sludge) * Suction from open waters possible "comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR - type class AT/FL L4BH * DRAINING: by means of a pneumatically actuated piston * MUDDING WATER DRAIN DN 80: for pushing back the dirty water via the boom into the sewer. * Manhole DN500 MAN TGS 26.480 chassis * 6x2 - 4BL * TipMatic with OMSI * 470PS/346KW * EURO 6e * Fuel capacity 400l * Chassis color RAL 9010 pure white * Color cab RAL 9010 pure white * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550cbm/h at 400bar * Drive: flexible, via cardan shafts, V-belts and pneumatically switchable friction clutch from the auxiliary drive of the vehicle engine. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach stop side 5,200 mm * Additional suction hose hoses with suction at the right rear with approx. 30 m DN 80 suction hose High pressure system * Uraca KD 718 approx. 315 l/min at 170 bar * Drive: elastic, via cardan shafts, V-belt and pneumatically switchable friction clutch. * approx. 240m HP hose DN 25 * Large HP hose reel for 240m 1? DN 25 180° swivel * Equipped with 240m DN 25 * small HP hose reel for 80m ?? DN 13 hydraulic * equipped with 80m DN13 Special features * Hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of the suction hose hydraulically via roller guide carriage * Hydraulic and telescopic extension arm for suction hose that can be swiveled through 180 * ADR version L4BH type class FL incl. EX/II, EX/III and AT * Spray gun * LED rotating beacons * Removable and swiveling halogen work lights * LED ambient lighting * Remote control of work functions via CAN-BUS technology * Radio remote control with 14 functions * Hand-washing device (warm) * Large cabinet at the rear left, e.g. for a sliding camera * Rear view camera with 7? color monitor incl. day/night switching * Sound insulation cladding in front of pump compartment * WATER MANAGEMENT WARNING SYSTEM: with buzzer in the main control cabinet and automatic pump shutdown. * Residual water drainage: pneumatic for all water-bearing parts with connection to the truck compressed air system. * Large equipment box * Tool box * Holder for traffic cone * vice * ladder * Large advertising boards on the right and left * Manhole DN500 Technical data* GGW 26.000KG * Empty weight 18,760 KG * Length 9,280mm * Height 3,740mm * Width 2,550mm * Wheelbase 3,900mm For more detailed information and/or pictures please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to alterations, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Fjdpfx Aajfz U Tqoyjpl Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Fpsdpfx Aor Hr Areayol Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: good (used), Frame: 7000*1050 mm 105 EUR/piece (53 pieces) Beams: 1800*100*50 mm 2400 kg/level 10 EUR/piece (315 pieces) If you need shelving or accessories in other configurations or versions, please contact us. Fpjdpfouf Snaox Aaysl We offer a comprehensive range of new and used racking systems and accessories and are happy to assist you with your planning. Additional accessories available, such as: Frames, corner and collision protection, push-through guards, chipboards, mesh shelves, back mesh panels, depth supports. Shipping: Please enquire about shipping costs by providing your postal code, city, and the desired item quantity. Other services offered: Planning, rack assembly/disassembly, purchasing/sales Subject to changes and errors in technical data, information and prices, as well as prior sale!

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed belt width 600 mm Fjdpfx Aozx Urcsayopl steam hood with electromechanical lifting system Suitable for steam injection (to heat up and to improve product yields) 180 kW / 275 A with lecithin bath steam connection DN 40 suitable for CIP cleaning system outside dimensions (l x w x h) : ± 8.800 x 2.000 x 3.200 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New electrical heating elements: New folded heating resistances Completely new wiring Electrically tested, heated through, and measured

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fedpfjzx Unwjx Aayspl Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: new, bore capacity in steel (diameter) 40.0 mm threading 30 M workpiece height max. 380 - 785 mm arm length 985 mm spindle taper 4 MK boring head swiweling right/left -80 / +80 Grad table surface area 1210 x 520 mm turning speeds 50 - 2000 U/min column diameter 220 mm column diameter 220 mm table surface area 1210 x 510 mm quill stroke 200 mm feed range - spindle 0.08 - 0.50 mm/U total power requirement 2.2 kW weight of the machine ca. 2800 kg dimensions of the machine ca. 2450 x 1200 x 2720 mm characteristics - A variety of clamping and machining options thanks to the Fodpfxexaadyj Aayjpl construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 - Thread cutting device - LED machine light - coolant device - Height-adjustable protective cover

Condition: new, turning length 3000 mm turning diameter 660 mm turning dia. in gap 900 mm turning diameter over slide 460 mm turning speeds 25 - 1600 U/min quill: 5 MK quill travel 235 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 weight of the machine ca. 3.300 kg. dimensions 4.630 x 1.200 x 1.529 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinal and planar - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - Clamping disk 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Change gears Fpsdpfjxaahljx Aayol - Reduction sleeve - Chip back wall - Cable routing via energy chain - Operating tool

Condition: new, sheet width 2020 mm plate thickness 2,0 mm daylight opening 124 mm bending angle max. 0 - 135 ° work height max. 930 mm total power requirement von Hand kW weight of the machine ca. 1.010 kg dimensions of the machine ca. 2,75 x 0,56 x 1,26 m characteristics - Easy to use swivel bending machine Fodpfoxaaanox Aayopl - Flat guide for exact movement of the upper beam - Manually adjustable bending angle using a scale - Robust welded steel construction, designed for heavy use - Large opening width for processing tall workpieces - Optionally with back gauge for series work - Quick and easy bending process using a bow handle - Workpiece clamping by means of a large lever

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg Fodpsxaa Urefx Aayopl range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Fpjdpfxexacfms Aayjl Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) with only approx. 31.800 operating hours - in checked condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek down holder 14 Stück work height max. 840 mm Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) Fedpfxsxab Ruj Aayopl - Rear sheet chute - Original operating instructions

Condition: new, turning length 3000 mm turning diameter 660 mm turning dia. in gap 870 mm turning diameter over slide 420 mm turning speeds 36 - 1600 U/min quill: 5 MK quill travel 150 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 weight of the machine ca. 3990 kg. dimensions 4500 x 1280 x 1650 mm Scope of delivery - Slip clutch - Rapid traverse longitudinal and planar - LED machine light - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 630 mm - Fixed steady rest - passage diameter max. 250 mm Fsdpfxjxabyce Aayepl - Follow-on steady rest - passage diameter max. 110 mm - 1 centering point / 1 follow-on punch point - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Reducing sleeve - Chip back wall - Operating tool

Condition: used, Year of construction: 2019, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable 500 mm control DA 66T oil volume 150 ltr. voltage 380 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request - in checked condition - machine video - ?v=KRifrqTgkVU ----- SPEED BEND PRO CNC press brake: * increased installation height Fpodpfxjzlulpo Aayol * increased cylinder stroke * and increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-66T" graphics/touchscreen * 2D graphic touchscreen programming mode * 3D representation in simulation and production * 17" color TFT screen with high resolution * Bending sequence calculation * Product programming and representation in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back stop (X axis) * on ball screws * Travel path .. 500 mm * Travel speed .. 500 mm/s * with 2x manually adjustable stop fingers - CNC electro-motor height adjustment (R axis) * Travel path .. 250 mm * Travel speed .. 350 mm/s - AMADA/PROMECAM upper tool holder * including clamping jaws with upper wedge camber * 1x ROLLERI split set 60° upper tool - AMADA/PROMECAM lower tool holder * including 1x die shoe "C 1050-R" * 1x AMADA 1-V die 85° - Safety device at the rear (door including safety switch) - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x freely movable double foot control - CE mark / Declaration of conformity - Operating instructions including circuit and hydraulic diagram

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used small hydraulic plate shear from OMAG Fsdozk Akdjpfx Aayepl Type: CEL 104 Capacity: 1050 x 4 mm Electric back gauge Year of manufacture: 1987

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Used 3-meter CNC plate shear from ERMAK Fjdpfezzpfcox Aayopl Type: CNC HVR 3106 Cybelec DNC 60 control system Capacity: 3100 x 6 mm Electric back gauge Electric cutting angle adjustment Electric cutting clearance adjustment Year of manufacture: 2012