Used Wagner Sprayer for sale (246)

Condition: good (used), Year of construction: 1990, machine/vehicle number: 90650664, Offer 24402 Technical data: Ibedpsuzvzxefx Aggoa - Drilling capacity in steel 50 mm - Drill spindle holder MK 5 - Drill spindle stroke 315 mm - Projection min / max 350 / 1600 mm - Column diameter 350 mm - max. / min. distance - Spindle - base plate 350 - 1250 mm - Vertical stroke of the arm 580 mm - 16 spindle speeds 25 - 2000 rpm - Feed rates 0.04 - 3.2 m/rev - Drill spindle drive 400 V / 4 kW - Lift drive 1.5 kW - Column clamping 0.75 kW - Cube table - Coolant device - Space requirement approx. W 2490 x H 2645 x D 1060 mm - Weight approx. 3500 kg

Condition: good (used), Year of construction: 2017, machine/vehicle number: N 16601, Offer 25387 Technical Data: - Drilling capacity in steel: 60 mm - Drill spindle taper: MT 5 - Drill spindle stroke: 300 mm - Digital positioning display for stroke and position - Radius (throat): 1600 mm - Column diameter: 350 mm - Max. distance spindle – base plate: 350 – 1650 mm Iodpfx Agsx Ei D Ajgoba - Vertical travel of the arm: 1250 mm - Spindle speeds, stepless: 30 – 1500 rpm - Feeds, stepless: 1 – 600 mm/rev - Drive: 400 V / 8.9 kVA - 2 x cube tables - Coolant system - Required floor space approx.: W 2490 x H 2980 x D 1060 mm - Weight approx.: 3800 kg

Condition: ready for operation (used), Year of construction: 2008, Universal tool milling machine WAGNER FCA 400 -Year of manufacture: 2008 -CE marking -3-axis digital readout -Traverse paths X/Y/Z: 450x400x400 mm -Fixed angle table: 740x320 mm -Automatic feeds on all three axes Isdpfx Agey Ddhmsgjba -Rapid traverses -Spindle speed range: 40-2000 rpm -Tool holder: ISO 40 -Vertical / horizontal milling device -Vertical head with quill -Safety handwheels -Coolant system -Horizontal counter-support -Work light -Machine feet Dimensions LxWxH: 1.4x1.2x1.9 meters / Weight: 1800 kg Errors and omissions excepted.

Condition: used, Technical characteristics: *HYDRAULIC AUTOFEED *DISC DIAMETER 500 mms Ijdpfxj Dv Rcj Aggoba Comments: *MADE IN GERMANY

Condition: used, functionality: limited functionality, machine/vehicle number: 366507 16290, Year of construction: 1990, load capacity: 2,000 kg, load center: 600 mm, fuel type: electric, mast type: duplex, DGUV certified until: 12/2026, fork length: 1,200 mm, Equipment: sideshift, For sale is a Wagner reach truck, year of manufacture 1990. The forklift was fully operational until four weeks ago. The drive motor for steering and the sideshift (hydraulic cylinder) are defective. Load wheels are as new. Ibodjytr Dyjpfx Aggoa

Condition: used, Year of construction: 2009, CNC Machining Center Wagner-Eumach, Model EBM 3200, year of manufacture 2009 for sale. Condition: Fully operational Travel X-axis: 3,200 mm Travel Y-axis: 1,100 mm Travel Z-axis: 900 mm CNC control manufacturer: Sinumerik CNC control model: Sinumerik 810D Shopmill Ibjdpfxsw D Slto Aggea Total weight: 25,000 kg Overall length: 7,800 mm Overall width: 4,700 mm Maximum workpiece weight: 5,000 kg Feed travel X-axis: 3,200 mm Feed travel Y-axis: 1,100 mm Feed travel Z-axis: 900 mm Spindle motor power: 45,000 W Rated apparent power: 45 kVA Max. spindle speed: 6,000 rpm Min. spindle speed: 6,000 rpm Table length: 3,250 mm Table height: 1,030 mm Table load: 5,000 kg Table width: 1,220 mm Maximum tool diameter: 125 mm Maximum tool length: 300 mm Maximum tool weight: 15,000 g Spindle operating hours: 18,000 h Equipment: Chip conveyor, NC rotary table (table size 800 x 800 mm), tool holder SK 50, through-spindle coolant (IKZ) Inspection possible by appointment.

Condition: used, Year of construction: 2008, Wagner WDE500 Lathe, Year 2008 Used lathe from Wagner Wagner WDE 500 cycle-controlled lathe Only approx. 1,700 operating hours Turning diameter: 500 mm Turning length: 1,500 mm Control: Siemens 802 C Swing diameter over cross slide: 280 mm Spindle bore diameter: 82 mm Number of controlled axes: 2 Speed range: 20-3,000 rpm Rapid traverse speed: 5 m/min Number of tool stations in turret: 1 Multifix "C" Tailstock: Yes, MT 5 Drive power: 7.5 kW Machine weight: approx. 3.0 t Dimensions (L x W x H): 3.3 x 1.7 x 1.7 m Cycle-controlled CNC lathe in good condition. Accessories: - Coolant system Iedpfx Ajxlz Rxeggsba - Base holder - 3-jaw chuck - Various PARAT tool holders With original operating manual Fully functional, good condition as shown in the photos Viewing, collection and delivery available for a fee

Condition: good (used), functionality: fully functional, High-pressure piston-diaphragm pump. Universally suitable for aggressive, abrasive, or shear-sensitive products. Very low rinsing agent consumption. For all applications up to 250 bar and 5 l/min. Supplies up to 8 AirCoat spray guns. Ibsdpfx Aexmf Svjggja + 3 automatic AirCoat spray guns with internal control for installation in automated painting systems. +FITTINGS+AIR/PRODUCT HOSE

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 370 mm, spindle bore: 80 mm, turning length: 2,000 mm, turning diameter: 610 mm, spindle speed (max.): 1,800 rpm, Swing diameter over bed 610 mm, over cross slide 370 mm. Distance between centers 2000 mm. Spindle bore 80 mm. Speed range 40 - 1800 rpm. Tailstock: quill travel 150 mm, Morse taper 5. Includes Siemens 810D manual turn control, steady rest, Parat toolpost, coolant system. Three-jaw chuck D 315 with various jaws, chuck mounted on spindle rear side. Manual, CE declaration. Ibsdpfx Aeyzmk Eoggsa

Year of construction: 2007, condition: used, functionality: fully functional, Hello, we are selling our epoxi mixer and applicator Wagner colora. The machine is in working condition but it needs some cleaning and small repairs. We use it for the mixing of the A component Tenax RESINA 5030 and B component Indurente BB30H and use it for the stone slabs reinforcement. The machine is mounted on the mobile steel plate with wheels. For the working it needs 2x 240V power supply for the heating belt for both components and compressed air for working. In the offer is also a lot of spare parts like an extra application gun, a lot of mixers for the resin, one way valves, set of gaskets for the both dosing cylinder. I can send an video of working. Ibsdpfxsym Uubs Aggja Best regards,

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: ML 964F08, controller manufacturer: Siemens, controller model: SIEMENS Sinumerik, number of axes: 3, Equipment: chip conveyor, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 3 Control: SIEMENS Sinumerik EQUIPMENT Tool changer Chip conveyor Ibjdpfx Ageyaqi Iegea

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2027117, overall weight: 4,500 kg, controller model: SIEMENS Sinumerik 828D, Equipment: chip conveyor, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Tool turret: 12-position Control: SIEMENS Sinumerik 828D MACHINE DETAILS Ibedpfx Agsw T Rttsgea Weight: 4,500 kg EQUIPMENT Chip conveyor

Condition: used, Year of construction: 2018, Wagner electrostatic powder coating system for enamel application, year 2018, serial number 30210, with a touch screen control panel, consisting of: • 1 PVC spray booth with overall dimensions of length x width x height: 3200 x 2130 x 4000 mm • Dimensions of the part entry/exit opening: 1000 x 1000 mm • 1 HERDING filter (cyclone) with automatic powder recovery • 1 shaker for powder suspension with extraction and powder recovery • 1 EP powder feeder with 32 pumps (injectors) • 12 automatic spray guns, model PEA-C2, for enamel application, with a double blade head • 9 universal EPG/S2 control units for powder guns • 1 GCA compressed air treatment unit used in the system (heating/humidification) • 1 overhead monorail transport system, 35 m long, serving the spray booth. The line is located at the parent company in Italy, near the town of Pordenone. Ibedpfx Agjy Tn Atogoa Direct contact is possible, upon prior arrangement.

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Iedpfxev Ed Uko Aggeba Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: used, Year of construction: 1991, functionality: fully functional, travel distance X-axis: 1,830 mm, travel distance Y-axis: 940 mm, travel distance Z-axis: 1,000 mm, We offer this used WAGNER WM 2000 milling machine, year of manufacture 1991. Isdpfxoyub Scs Aggeba Model: WM 2000 Machine serial no.: 9109330 Year of manufacture: 1991 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), CV saw grinder Wagner model LT Ibodpoywaxnefx Aggea

Condition: not inspected (used), I sell the Airless high pressure set of painting devices without guns. 2 stk. high pressure pump Kovofiniš vyza 4V ratio 33:1, output pressure 9-25 MPa Ibsdpfx Aed Nnb Roggea 1ks. high pressure pump Wagner 600 Airless 2ks. high pressure tank Kovofiniš TZ60M und TZ100M 1ks. Tank Kovofiniš. On stock. Sellable immediately. Total price 1000 Euro.

Condition: like new (used), Year of construction: 2023, operating hours: 28 h, functionality: fully functional, machine/vehicle number: 2380029, total height: 2,600 mm, total width: 1,500 mm, total length: 3,410 mm, overall weight: 4,200 kg, rotor diameter: 330 mm, type of input current: AC, rotor length: 800 mm, power: 30 kW (40.79 HP), Function: The input material is drawn in by two slowly counter-rotating shafts (resulting in dust- and noise-free operation), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. In the event of overload or the presence of foreign objects in the cutting unit, the control system reverses the direction of rotation. The precise cutting gap between the discs enables energy-efficient shredding of the material. The attached scraper comb prevents material from wrapping around or being pulled up into the cutters. The width of the cutters and the number of cutting edges determine the output particle size. Possible applications: Thanks to its robust construction and design for long service life, this machine can shred, economically, not only special waste, metal chips, electronic scrap, and steel drums, but also all kinds of containers filled with liquids. Ibsdpfxsyw N Acj Aggja All types of industrial waste, metal and plastic containers Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal shavings Food, kitchen waste, biogenic waste, wood Glass, plastics, various containers filled with liquids, etc.

Condition: ready for operation (used), Wagner paint unit Paint and lacquer pump MODEL T.371 Iedpfx Asyaqpbeggsba

Condition: as good as new (ex-display), functionality: fully functional, Cobra is an exclusive high pressure double diaphragm pump suitable for Airless and AirCoat applications up to 250 bar. Cobra is the first high pressure pneumatic pump without packing. The lack of contact between the material and the external atmosphere (the pump is completely sealed), the absence of friction in the fluid section and the minimum shear make it perfect for any kind of material including the most critical ones such as reactive paints (UV paints, isocyanates, acrylics) or highly abrasive materials. The pump works with extremely low pulsation and creates a uniform paint flow, achieving a perfect spray pattern and superb surface quality. With its minimized internal volumes, the pump is designed to greatly reduce solvent consumption and material waste during flushing and color-change operations. Cobra 40-10 is the ideal solution for working with small quantities and frequent color changes – recommended for single-gun up to three-gun applications in the wood and furniture industry, small carpentry shops and joineries, and the general metal industry. Cobra® 40-10 is also ideal for feeding base or hardener for 2K mixing units (FlexControl and FlexControl Plus). Wagner membranska pumpa OMJER PRITISKA 40 :1 MAKS. TLAK MATERIJALA NA ULAZU PUMPE 20 bara DOVOD MATERIJALA M-M 36x2 IZLAZ MATERIJALA M-G 3/8’’ TEMPERATURA MATERIJALA 10 - 80 °C ULAZNI TLAK ZRAKA 2,5 - 6,0 bara PRIKLJUČAK ZA ULAZ ZRAKA F-G ½’’ RADNI TLAK 250 bara MAKS. BRZO UDARA 200 DS/min VOLUMETRIJSKI PROTOK PO DVOSTRUKOM UDARU 10 cm3/DS TEMPERATURA OKOLINE 10 - 60 °C TEŽINA 19,0 kg MAKS. RAZINA ZVUKA 74 dB(A) MATERIJAL PH 3,5 - 9,0 pH PUMPA JE U KOMPLETU SA CRIJEVOM I PIŠTOLJEM GM4700AC Ibsdpfjqzx Nksx Aggja

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 002/003, used, normal signs of use, 100% functional, scope of delivery as per photos Ijdpjzu Htdofx Aggsba

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 001/003, used, normal signs of use, 100% functional, scope of delivery as per photos Isdpfx Agszu Hr Tegsba

Condition: excellent (used), Boyens Jelly compact glaze sprayer Ibsdpfx Aeix Iyroggja Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph

Year of construction: 2012, condition: like new (used), Boyens Jelly compact glaze sprayer Serial: 1500112073 Ibodjix Iynepfx Aggja 2012, Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph

Condition: used, Year of construction: 2014, machine/vehicle number: A14 02 009-0040, With paper web and belt conveyor with web cleaning.System consisting of: 1. Feeding conveyor 2,000 mm 2. Spraying machine 3,630 mm 3. Take-off roller conveyor 2,000 mm - Total length: 7,630 mm - Operator side: leftItem 1 Feeding belt: - Manufacturer: Venjakob - Model: Belt Conveyor AL - Year of manufacture: 2014 - Feed rate: approx. 2.5–5 m/min. - Max. load: 15 kg/m - Length: 2,000 mm - Motor power: 0.5 kW - Variable-frequency drive (VFD) controlledItem 2 Automatic Spray Machine:Can be operated with either the belt conveyor system or the paper belt conveyor system!- Manufacturer: Venjakob - Model: VENSPRAY Smart - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 920 mm ± 20 mm - Operating side: left - Suitable for solvents and water-based coatings - Price for a refurbished machine - As-is condition; machine has not been refurbished - Spray gun drive in Duo configuration - Dry extraction - Exhaust port diameter: 400 mm - Exhaust air flow rate: 7,000 m³/h - Feed speed: infinitely adjustable ~ 2.5–5 m/min - Light curtain, part detection, Type LS 25 - Touchscreen control - Paper belt transport system - Belt squeegee and cleaning system Type R1 - Number of paint circuits installed: 2 Ibsdpfxeztf Nhe Aggja - Number of spray guns installed: 4 - Quick-change system for spray guns - Spray guns, Type Kremlin Airmix AVX - Airmix spray system - Number of paint pumps: 1 - Pump manufacturer: Wagner Cobra 40/25 - Length: 3,630 mm - Width: 3,450 + 990 mm - Total power consumption: 16 kW - Location: not in stock - Voltage fluctuations: max. ±5%Item 3 Acceptance of roller conveyor: - Manufacturer: Venjakob - Type: Roller conveyor - Year of manufacture: 2014 - Feed rate: approx. 2.5–5 m/min - Max. load: 15 kg/m - Length: 2,000 mm - Roller spacing: 150 m - Variable-frequency drive controlled Images are for illustrative purposes only; they are not originals*