Used A.f.b. Ms21 2400Mm / 8 for sale (35,563)

Condition: excellent (used), For sale: DDR motor pump. Pgsdoz Sk H Aopfx Abueu - 800 l/min - 28 hp - In very good condition.

Condition: used, machine/vehicle number: 12625, Rotor diameter: 800 mm Rotor width: 1500 mm 6-knife rotor 4 rows of stator knives Infeed cross-section approx. 820 x 1500 mm Pedpfx Absyr Tqfouogu Drive motor: 160 kW

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3+5) 8-piece hydraulic swing BPW axle unit with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low bed trailer, type STHP (3+5), comprising 4 heavy-duty modules with a detachable gooseneck, up to 5 m long telescopic excavator low bed with 4 wheel recesses, ABS, and technical payload up to 175,620 kg. Consisting of the following four separate heavy-duty modules: 1st Module: Hydraulic universal gooseneck, type STH - Can be combined with heavy-duty dolly modules and overdrive loading bridges - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - King pin: 3.5" - Plug-in aluminum side walls - Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - Permissible total weight (as a single module): 108,000 kg - Permissible axle load: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technical payload (as a single module): up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, tires: 215/75/R17.5 - Axle load: 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Hydro-mechanical 2-circuit forced all-wheel steering integrated in chassis, max. axle steering angle: 60°, with integrated hydraulic oil tank - Front/rear optimized pin-plate coupling for longitudinal configurations - Single-wheel pendulum axle assemblies, total 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - BPW axles with drum brake incl. ABS, technical axle load 34 t at 5 km/h Pgsdpfoz N Np Nex Abuou 3rd Module: Low bed heavy-duty module, extendable - excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extension module in the front area - Overall height in wheel recess area: approx. 150 mm - Loadable up to 80 t in the low bed and 175.6 t in the complete module combination STHP 8 (3+5) - Front and rear hydraulic bolt plate coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Permissible total weight: 115,000 kg - Permissible axle load: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-wheel hydraulic pendulum axles with 4 wheels per axle line, 20 x 285/70 R 19.5 tires - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - Radio remote control for steering axles 5. Notes: The 4 heavy-duty modules allow for up to 3 different train combinations! Payloads vary depending on combination. The low bed can be inspected and demonstrated at our site. A current manufacturer's certificate from Goldhofer is available for this special low bed combination. Price NET plus 19% VAT. All information subject to change and prior sale. Internal vehicle number: 2285 Advert also available in full German / Inserat auch komplett in Deutsch verfügbar

Condition: new, Contactor (power contactor) for switching electric motors or other higher-power loads on and off. 15 kW/32 A. Psdj Afd Evjpfx Abuegu

Condition: used, machine/vehicle number: 008244, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Pgedpfx Ajx Swgfobueu

Condition: excellent (used), Catalog number: 7715 TECHNICAL DATA Pgedpfx Abjzx Rlxeueu - Max. width of workpiece: 220mm - Max. height of workpiece: 130mm - 8 spindles: 1) Horizontal, lower: 220mm, 5.5kW 2) Vertical, right: 130mm, 7.5kW 3) Vertical, left: 130mm, 7.5kW 4) Vertical, right: 130mm, 5.5kW 5) Horizontal, upper: 220mm, 11kW – 5th spindle adjustable electrically, up/down 6) Horizontal, lower: 220mm, 5.5kW 7) Horizontal, lower: 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal: 220mm, adjustable 360°, 7.5kW - All spindles adjustable, up/down, left/right - Spindle diameter: 40mm – Top: - 6 infeed rollers, double-toothed, pull-type + 1 single - 3 outfeed rollers, pull-type, rubber, smooth, double + 3 single - Meter counter – Bottom: - 1 infeed roller, toothed, pull-type, swiveling in the lower table - 3 metal outfeed rollers, pull-type, smooth - Feed on Cardan shafts - Rollers with pneumatic pressure - Stepless feed speed adjustment + 2 speeds, 10-60m/min - Feed motor: 10kW - Electric adjustment of planing thickness - Body lifting motor: 0.75kW - Central lubrication of the table - Diameter of dust extraction nozzles: 5x140mm, 3x120mm - Machine dimensions (L/W/H): 4680x1780x1850mm - Control cabinet dimensions (on pallet): 1020x1000x2230mm - Weight: approximately 5000kg ADVANTAGES - 8 heads - Universal spindle - Ideal for both wet and dry wood - German production, WEINIG brand - Unpainted - Very few operating hours - Used planer, in perfect condition Net price: 125900 PLN Net price: 29280 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, pressure: 180 bar, empty load weight: 126 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 8/18-4C HOT-WATER PRESSURE WASHER Year of manufacture: 2023 The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 800 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 ~3-phase Flow rate [l/h]: 800 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 98–155 Connected load [kW]: 6 Cleaning agent tank [l]: 15 Hose length [m]: 10 Weight [kg]: 126 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M Pjdez Tqwpopfx Abuogu NEW stainless steel pressure lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components makes the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal piping.

Condition: used, functionality: fully functional, mileage: 22,000 km, power: 405 kW (550.65 HP), gearing type: automatic, fuel type: diesel, color: black, axle configuration: 6x2, first registration: 07/2024, emission class: euro6, Year of construction: 2024, operating hours: 680 h, Equipment: ABS, air conditioning, parking heater, traction control, Available from April 1, 2027. Used suction dredger directly from the manufacturer – for sale or rent. Are you looking for a used suction dredger that is readily available, technically reliable, and economically attractive? At MTS, you can get used suction dredgers directly from the manufacturer – professionally inspected, technically and visually refurbished, and ready for its next assignment. Currently Available: MTS DINO VARIO 8 m³ - SB 1612 on Volvo FH 6 x 2 Suction unit: Tested quality directly from the manufacturer 6 months warranty 1 year/500 operating hours maintenance-free Operating hours of fan: 652h Operating hours of compressor: 670h Standard equipment MTS suction unit MTS double fan MTS material separation system (patented) Automatic filter cleaning, compressed air compressor 4.5m³/min, 8 bar Articulated boom POWERARM with 7m suction hose 3 stabilization supports PLC control with optional remote diagnostics Radio remote control (brand: Gross Funk) Storage option Optional module options Container & lid, stainless steel lining Stainless steel design for toolboxes Articulated boom EVO-POWER ARM Rotary suction pipe system IKE/PERFOR Suction & drive & steering HYDROSTAT Electric steering Volvo Full fairing DESIGN High-tip HIGH-TIP with 4 supports (2+2) High-pressure water system 30 l/min Vibrators on the suction hose Industrial equipment Industrial package II: Gas sensor Infinitely variable speed control for fan Pgedpfxezvw U Uj Abusu Filtration unit for oil circuit Environmental equipment Hydraulic oil, biodegradable Noise reduction package: Sound insulation of the container exterior Accessories - Module Container with 2 pneumatic vibrators Access ladder, machine house (2x) Ladder under the hose rack Accessories - Lighting Light package II: 2 LED lights on the central joint of the articulated boom Light package III: LED light strips in the toolbox Light package V: LED lights next to the articulated boom shaft Light package VII: Fire brigade lighting 2x Light package VIII: Light bar at the rear Accessories - Safety 4 warning lights Anti-slip coating Accessories - Filter system Filter cleaning with pneumatic vibrator Accessories - Tools Vogt pneumatic shovel Atlas Copco 20 KG hammer Air lance The general terms and conditions for used vehicles of MTS GmbH apply and can be found at: saugbagger.com/allgemeine-geschaeftsbedingungen Errors and prior sale excepted. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment, and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: used, 2x Hohner Universal 52/8 Narrow Stitching Heads, used The Hohner Universal 52/8 are a high-quality narrow stitching heads designed for professional use in folding and saddle stitchers. It stands out for its robust construction, precise engineering, and versatile applications. Key Features: - Suitable for standard and loop stitching - Quick conversion and easy adjustment for different stitching types and wire sizes - Includes extensive accessories - Easy maintenance with accessible wear parts and clear lubrication instructions - Proven Hohner quality for reliable continuous operation - Flexible adaptation to various production requirements - Compatible with many common machines and units Pjdpfjw Ew A Hox Abujgu Technical Specifications: - Maximum stitching thickness: up to 8 mm (closed staple) - Processes round and flat wire in various diameters (0.35 to 0.80 mm Ø) - Staple crown width: 14 mm - Net weight: approx. 4.0 kg

Condition: used, SIEMENS CONNECTION PANEL HT 8 6FC5403-0AA20-0AA0 HT 8 Condition New Pgodoy Tbx Uepfx Abuju

Condition: used, Kuka Robot KR 8 R1620 KCP 4 Pedjzwc Upopfx Abuegu Industrial robot KR C4 smallsize-2 Robot Complete and fully operational

Condition: used, mileage: 19,000 km, power: 100 kW (135.96 HP), first registration: 05/2000, overall weight: 7,495 kg, fuel type: diesel, color: red, next inspection (TÜV): 09/2027, gearing type: mechanical, emission class: euro2, loading space width: 2,290 mm, loading space length: 2,870 mm, loading space height: 1,600 mm, Year of construction: 2000, total length: 6,430 mm, total width: 2,400 mm, total height: 2,960 mm, number of seats: 9, Equipment: ABS, parking heater, First owner. Small volunteer fire department; it will remain fully operational at the fire station until the new vehicle is delivered in the summer of 2026. Originally driven only just under 19,000 kilometers. The vehicle passed its technical inspection (TÜV) without any issues on September 1, 2026, and was immediately approved for continued use. Valid until 09/2027. Last service at 18,138 km, with "no defects found." Maintenance was always performed exclusively at the local Iveco/Fiat authorized workshop, and this was consistently done until recently. 9 seats. WEBASTO AirTop 32 S auxiliary heating system. Fire engine LF 8/6 with a MAGIRUS superstructure, manufactured in 2000. 600-liter water tank. Equipped with a tank heating system. Rear pump FP 8/8 with 118 operating hours. Lighting mast located between the superstructure and the cabin. 24-volt and compressed air connection on the driver's side step. Engine: Iveco 4-cylinder inline diesel engine with 3908 ccm, Euro 2 emission standard; it starts and runs perfectly. 6-speed manual transmission. Differential lock on the rear axle. Maximum speed of 86 km/h, according to the vehicle registration documents. Robust truck chassis with leaf spring suspension. Power steering. ABS and ASR (Anti-Slip Regulation). Radio. Electrically adjustable exterior mirrors. Unladen weight according to vehicle registration documents: 5035 kg. Permissible total weight: 7495 kg. Overall vehicle dimensions: Length: 6430 mm / Width 2400 mm / Height 2960 mm. The box body has a main compartment measuring approximately 2.87 m long / 2.29 m wide / 1.60 m high. The roof is walkable, with a large storage box on the left side; the box lid is easy to open and close thanks to gas-filled struts. Interchangeable tow hitch with a 2000 kg braked trailer load or 1500 kg unbraked trailer load (ball and pintle hitch). Tires: MICHELIN with snow flake symbol, DOT code 2020. Size: 205/75R17.5. Condition: 6 tires are almost new. Batteries: 2x NEW in 2025. Prepared for digital radio communication. The special warning lights with front flashers are functional. The Martin horn has been removed and is no longer available. The fire engine has minor signs of wear and is generally well-maintained. The vehicle was handed over to us in a ready-to-use condition after being taken out of service. The Iveco with MAGIRUS-Weisweil superstructure is immediately available here. The necessary manuals with wiring diagrams and some documents are included; the service booklet was only filled out at the beginning, but all essential original documents from Iveco are available. There are 2 original Iveco vehicle keys that operate smoothly and identically in all 4 doors and also in the ignition lock. The compartment door locks and flaps are all easy to open and close. The Iveco has recently received several new parts. According to the mayor, this vehicle has not been involved in any accidents. The vehicle is explicitly offered here as an "operational vehicle." If the vehicle is not put back into service as an operational vehicle in the future, the special warning lights must be completely removed, and all vehicle markings must be removed. Pgsdpfx Aozpgphobueu This offer is only valid for commercial enterprises and freelancers of all kinds, as well as for authorities and emergency services (BOS) of all kinds. Sales to purely private end consumers are excluded. Subject to prior sale and erroneous information. The offer is subject to §25

Condition: used, Year of construction: 1985, 1x Used MOCO AZ-8 Shredder Pedpfxezx Svxs Abusgu Drive power: 7.5 kW

Condition: ready for operation (used), Siemens control panel Sinumerik 8 MS421-D, used, normal signs of use, 100% functional, scope of delivery as per photos. Pgedpozzhmlefx Abuju

Condition: ready for operation (used), Siemens C71458-A6331-A1 GUEB SINAUT 8 board SN: 10238, used, minor signs of wear, 100% functional, scope of delivery as per photos Pgjdpfxjzzhmrj Abuou

Condition: used, axle configuration: 2 axles, first registration: 06/2013, loading space length: 4,242 mm, loading space width: 2,149 mm, loading space height: 98 mm, * Drum brakes * Container * Roll-over tarpaulin Internal vehicle number: 12459 Pgsdpfx Abszzi H Tjuou Errors and prior sale excepted.

Condition: used, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Pjdpezkvucsfx Abuegu Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Schleifscheibenausrüstung jeweils 400x63x127mm -Einrichtung zum Betrieb einer HF-Spindel -Spindel optional gegen Aufpreis -B-Achse CNC gesteuert zum Aussen-Plan- und Innenschleifen in einer Aufspannung. Schwenkbereich +10°/-270° -C-Achse zum Polygonschleifen -Unterteil fest -Schleifkopfmotor 10,0 KW -Reitstock -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs

Condition: used, functionality: fully functional, machine/vehicle number: BME8879, Year of construction: 2020, operating hours: 3,880 h, load capacity: 2,500 kg, lifting height: 3,500 mm, fuel type: electric, mast type: simplex, construction height: 2,350 mm, fork length: 800 mm, empty load weight: 4,970 kg, total length: 3,000 mm, drive type: Elektro, construction width: 1,500 mm, Four-way side loader Chassis number: BME8879 Fork width: 125 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for use and fully functional Pjdpfxezhyqps Abuegu Technical condition: good Front tire type: Solid tires Front tire size: 2 x 343x135 Front tire condition: 40 - 60% Rear tire type: Solid tires Rear tire size: 4 x 250 x 80 Rear tire condition: 40 - 60% Battery voltage: 48V Battery capacity: 620Ah Battery year of manufacture: 2020 Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container stackers, reach stackers, forklifts & terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, lease-purchase, and financing at fair terms are always possible for us. We would also be happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Call me, Marco Levermann, and I will be happy to provide you with detailed information about this MAKE - MODEL. By the way, our specialist forklift workshop is specialized in the repair and maintenance of large equipment from 8 tons upwards. We would also be happy to offer your vehicle for sale on consignment.

Condition: used, Year of construction: 2015, functionality: fully functional, For filled Berliner donuts, yeast donuts, apple swirls, coated quark balls, and spritz cookies. Pgodpfx Abjz Auabeueu

Condition: used, mileage: 136,735 km, power: 118 kW (160.44 HP), first registration: 11/2017, fuel type: diesel, tire size: 255/75R17.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: orange, gearing type: mechanical, number of gears: 5, emission class: euro6, suspension: steel-air, total length: 6,900 mm, total width: 2,350 mm, total height: 3,100 mm, loading space length: 4,950 mm, loading space width: 2,220 mm, loading space height: 900 mm, Year of construction: 2017, Equipment: ABS, AdBlue, cruise control, traction control, trailer coupling, = Additional Options and Accessories = - Air suspension - Radio - Sun visor - Tool box = Further Information = Tire size: 255/75R17.5 Front axle: Steered; Tire tread depth left: 35%; Tire tread depth right: 35%; Suspension: Leaf spring suspension Rear axle: Dual tires; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60%; Suspension: Air suspension Unladen weight: 4,350 kg Payload: 3,140 kg GVW: 7,490 kg Model number: 8-160L OPRIJ / MACHINE TRANSPORT = Company Information = Pgedpfx Ajz Dg E Nobueu ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the published texts.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 537 h, load capacity: 350 kg, empty load weight: 2,120 kg, transport length: 2,500 mm, transport width: 810 mm, construction height: 2,230 mm, fuel type: electric, Equipment: UVV, Haulotte Compact 8 – electric scissor lift Pgodpfsyzdlysx Abuju Year of manufacture 2011, 537 operating hours. Working height 8 m, load capacity 350 kg, weight 2120 kg. Dimensions L x W x H: 2.50 x 0.81 x 2.23 m. Electric drive, 24 V. Batteries replaced in June 2025, as per the offer. Service and SUVA check recently completed; please confirm the inspection date, scope of inspection and agreed services for the specific machine. Purchase price EUR 6200 net, plus applicable VAT. Transportation costs quoted separately. Availability and condition will be confirmed in person. Inspection and collection in Ringgenberg by appointment.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 060900759, WITH TRIMMER p/n: 2654000N Format: to SRA Pgjdpfxjxcapho Abueu

Condition: excellent (used), first registration: 08/2008, color: green, Year of construction: 2008, Extendable body: Yes Technical condition: very good Visual condition: very good Pgsdpeykz Uiefx Abuou

Condition: new, Year of construction: 2025, Vertical packaging machine including dosing system(s) with 8 manufacturing lanes to produce "stick-packs" with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 8x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-50)mm; power: 220V, 5.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1700xW1400XH1900mm; weight: 650kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Pgsdpfxov Nmdio Abusu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2001, plate thickness 8.0 mm ST plate thickness 5.0 mm VA table-size 1000 x 950 mm blade length 200 x 200 mm strokes per minute 60 H/min adjustable Winkel 30°-140° mm work height max. ca. 950 mm oil volume 60.0 l engine output 4.0 kW weight of the machine ca. 1200 kg range L-W-H 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - 2x blank holders - 1x free moving footswitch Pgodjxab Sxjpfx Abuju - front scrap switch (collecting container) - Plexiglas finger protection in front, for better transparency - User manual (PDF) * Machinelink : ?machineno=1008-9397087