Used Acv Heating & Blower for sale (15,430)

Condition: like new (used), functionality: fully functional, 1. Like-new tubular heat exchanger (HT) for steam against water or water against water, liquid medium against steam or water. Material: Stainless steel – all parts in contact with the medium. Head plates of the baffle chambers made of P265GH; inside surface platinum-plated with stainless steel. Support consoles made of P265GH. Suitable for recovering cooling water or flash steam; Sustainable energy utilization. Heat exchange surface area: 905 m². Heat output – depending on the medium, well over 1,000 kW. Water flow rate up to 700 m³ / hour. Tube-side pressure: 4.0 bar gauge; test pressure: 9 bar gauge. Shell-side pressure: 9.0 bar – test pressure: 16 bar gauge. Maximum temperature: 140 °C. Rodpfxozc R Tfj Abgew For heat recycling or cooling, heating, heat exchange. Total weight: 12.0 tons. Dimensions: Length 6,500 mm; outer diameter 1,500 mm. Volume: 11,500 liters. The HT has been approved by Bureau Veritas as a pressure vessel – all documents are available.

Year of construction: 2014, operating hours: 59,436 h, condition: ready for operation (used), functionality: fully functional, Buderus Loganova EN20 CHP unit – 19 kW electrical / 38 kW thermal – Year of manufacture 2014 For sale is a combined heat and power (CHP) unit from the manufacturer Buderus, type Loganova EN20, from a commercial property in Stuttgart. The unit will be decommissioned as part of an upgrade to the energy supply. Technical data: * Manufacturer: Buderus * Type: Loganova EN20 * Year of manufacture: 2014 * Electrical output: 19 kW * Thermal output: 38 kW * Operating hours: 59,436 h * Start cycles: 6,031 Rsdpfx Abszd Uhhegew * Maintenance: Premium maintenance contract since commissioning Condition of the unit: The unit starts and runs up properly. Currently, there is a fault in the heat exchanger. According to initial assessment, the heating water pump is defective. The CHP unit is currently out of service. Location & Availability: Location: 70567 Stuttgart Planned decommissioning / dismantling: June–July 2026 Note: Regularly maintained unit with documented service history. Sale due to a unit upgrade. Inspection possible by appointment. If you are interested, we will gladly send you further information and photos.

Condition: like new (used), functionality: fully functional, machine/vehicle number: CS1, GEWA Chio vacuum CS1. The new price was €1,750. Redpfxsxiv Ers Abgsw

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale: a used CHP unit with few operating hours, hardly used. Natural gas. Rsdpfxezcwhve Abgjw Details: see nameplates.

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. Rsdpfjykvdlox Abgew - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: excellent (used), I'm selling a Heraeus T 5042 EK search engine Rodpfxju Udp Ie Abgew

Condition: good (used), functionality: fully functional, input voltage: 220 V, total width: 379 mm, total length: 450 mm, total height: 850 mm, input frequency: 50 Hz, DGUV certified until: 03/2027, Heating cabinet Temperature adjustable up to 90°C Stainless steel design Simple technology Rodpfevdktqjx Abgow Dimensions: 379 x 450 x 850 mm (W x D x H) Connection: 220V Used equipment Delivery service available Many other bakery machines in stock!

Year of construction: 1993, condition: used, 1x Used Aerzen GMA 11.4 Motor power: 15 kW Rodpfx Aex N T Ugjbgsw

Condition: used, Year of construction: 2023, Milk E-Heating System PHE Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump. Rsdpfey E H Eqjx Abgow Make: DMUK Capacity: 1000-1000 L/h Temperatures: Regulated by the controls Circulation Pump: Included Control Panel: Included VDF: Included Condition: Excellent

Condition: refurbished (used), The MALLDISON milk pasteuriser with a capacity of 1000 liters per hour is typically designed for efficient processing of milk, ensuring safety and preservation of quality through pasteurization. Here are some key features and aspects you might find relevant: Rjdpfx Aexzxwhjbgew - Functionality: The machine heats milk to a specific temperature for a set period, killing harmful bacteria while preserving essential nutrients. - Capacity: With a processing capability of 1000 liters per hour, it's suitable for medium to large dairy operations, allowing for high volumes of milk to be pasteurized quickly. - Design: Many pasteurisers feature a stainless steel construction for hygiene and easy cleaning. They often have insulated heating chambers to maintain temperature efficiently. - Control System: Modern machines often come with digital controls for precise temperature and timing adjustments, improving the reliability of the pasteurization process. - Safety Features: Look for built-in safety systems that can prevent overheating or pressure build-ups, ensuring safe operation. - Efficiency: The design often focuses on energy efficiency to reduce operational costs associated with heating. Divert Valve: Included Construction: Fully stainless steel skid amd stainless steel parts for the product Chart Recorder: Digital with Latest upgrade and test report in 2025 Balance Tank: Included Product Pump: Included Hot Water Pump: Included Heating: Self Heating with Built in Electric Elements Temperatures: Temperatures : 4-45-55-65-78(72) and out at 4 c Connection for Separator in line connection to Homogeniser Capacity: 500-1,200 L/h Available: Immediately

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: LOOS, Gunzenhausen Type: DF 600 Capacity: 600 kg/h Rodpfx Aow I T Ivobgow Thermal output: 400 kW Max. operating overpressure: 13 bar Water content approx.: 43 l Year of manufacture: 1996 Year of heating coil manufacture: 10 / 2023 Equipped with Weishaupt gas burner, gas control section, control cabinet mounted on the boiler body, feed water pump, and the existing coarse and fine fittings.

Condition: used, This listing is for the Grant T100 12L Heating Circulating Bath The unit is in full working condition and is ready for immediate use Grant T100 12L Heating Circulating Bath – Stainless Steel Tank The Grant T100 12L Heating Circulating Bath is a robust, precise temperature control system combining the T100 Optima circulator with a 12-litre stainless steel tank. Ideal for laboratories requiring high stability and reliability for routine heating applications, it’s designed for use across many scientific disciplines. Key Features Temperature Range: +5 °C to 99 °C (cooling via immersion coil available) Capacities: 12 L Stainless Steel Tank: Durable, easy to clean, resistant to corrosion Temperature Stability: ±0.05 °C Temperature Uniformity: ±0.1 °C Redpexhfyisfx Abgsw Heating Power: ~1.3 kW Controller: Grant T100 Optima circulator

Condition: used, This listing is for the Thermo Scientific Precision CIR19 Heated Circulating Bath Rsdpfjxhfpwjx Abgsw The unit is in full working condition and is ready for immediate use The Precision CIR‑19 is a robust and reliable lab tool tailored for high-precision temperature-sensitive workflows. Its strengths include excellent uniformity, precise digital control, safe operation features, and ease of maintenance. Whether you're incubating samples or performing delicate assays, it’s built to deliver consistent, reproducible results Overview & Applications The Precision CIR‑19 is a high-performance 19 L (5 gal) circulating water bath engineered for applications demanding strict temperature uniformity and control—think enzyme reactions, serological assays, or any sensitive method where thermal consistency matters. Key Features Perimeter-directed water flow for superior temperature uniformity. Coil-free internal design, making cleaning and maintenance a breeze. Microprocessor-based digital control, displayed via a monochrome LCD. Auto-on/auto-off timers and audible alarms, enhancing scheduling and safety. Low-fluid (dry-run) protection, guarding against overheating or damage. Hinged lid with extended height, ideal for accommodating taller labware. Supplied with a stainless steel gable cover, diffuser tray, and the quirky but useful rubber duck.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees Redsgrkigopfx Abgsw heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW Rodjk S Dt Topfx Abgew ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Details - Manufacturer: Durendus - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm - Table height over floor (incl. heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) Redpox Ap Itjfx Abgow - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. Redpfx Aetwv S Nebgow - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Rsdpfx Aouhmacebgjw Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Condition: excellent (used), Year of construction: 2013, Cooling power: 10 kW Heating power: 11 kW Refigerant: R407C Refrigerant diagram, operational limits see at the photos! We have15 unit in stock! Rjdpfx Abefx S Dasgjw

Condition: ready for operation (used), Compressor DWM DLJP-20x-EWL, Compressor DWM DLJP-20x-EWL, Piston Compressor, Cooling Compressor, Heating Compressor, Used machine Technical Specifications Brand: DWM COPELAND Model: DLJP-20X-EWL Refrigerant: Freon Weight: 82 kg Year of manufacture: 1999 Performance at different temperatures: -20ºC/+40ºC: 4.98 kW -30ºC/+40ºC: 2.75 kW Maximum pressure values: 28/22.5 bar Delivery capacity: 14.50 m³/h Rodpfx Absu T H Rlegjw Dimensions: Length: 460 mm Width: 330 mm Height: 550 mm Electrical Data: 400V; 5.6A; 1450 RPM

Condition: excellent (used), Heat exchanger, shell-and-tube heat exchanger, liquid cooler, Baltimore Aircoil International BAC F100, used machine Manufacturer: Baltimore Aircoil International Type: BAC F100 Year: 2015 Pressure: -10 / 10 bar Temperature: -20 / 82 °C Rjdpsyfnulofx Abgjw Medium: Water / Glycol

Condition: used, Plate Heat Exchanger,Heat Exchanger, SPX 034.MGS.10.1, Used machine Manufacturer : SPX Year : 2012 Overall dimensions : 450 x 610 x 1360 mm Heat transfer area : 18.93 m² Operating pressure : 10 bar Rodpfx Absx Da Dujgew

Condition: used, HB-Therm HB-100 U1 temperature control unit, Temperature control, Liquid temperature control, Industrial temperature control, Thermolator, used machine Manufacturer: HB-Therm Type: HB-100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Redpfxeyzmago Abgow Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: water

Condition: used, Plate Heat Exchanger,Heat Exchanger, SPX 034.MGS.10.1, Used machine Manufacturer : SPX Year : 2012 Overall dimensions : 450 x 610 x 1360 mm Heat transfer area : 18.93 m² Redjx Ttu Ijpfx Abgow Operating pressure : 10 bar

Condition: used, Centrifugal fan, 18.5 kW, used machine Overall dimensions: 1680 × 1650 × 1260 mm Weight: 457 kg Electrical data: 400 V; 18.5 kW; 34 A Rsdpfx Absyzypnegew Calculated air flow rate: 11,800 m³/h Calculated pressure: ~4500 Pa, 3.96 kg/s