Used Ajce Vibratory Plate for sale (12,567)

Condition: used, Year of construction: 1973, sheet width 1500 mm Hedpozxt Trjfx Andonu plate thickness 5 mm weight 3,8 t

Condition: excellent (used), Year of construction: 1988, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 370 mm, roller (top) diameter: 370 mm, side roll diameter: 280 mm, sheet thickness (max.): 20 mm, overall weight: 13,500 kg, total length: 6,900 mm, total width: 2,100 mm, total height: 2,100 mm, New ( 2026) Digital read out position side rolls Hydraulic drop end Minimum bending diameter 420 mm Full hydraulic machine Roll quality C60 900N/mm2 Rolling width: 3100mm Rolling thickness 3x toproll Ø:15mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending: 12mm Top Roll Ø: 370mm Bottom Roll Ø: 370mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0 - 4 Hedezxxgwjpfx Andenu Adjustiment lower roll: 0 - 700mm/min. Adjustment side rolls: 0 - 200mm/min. Number of driven rolls: 2 Power: 15kW Length: 6900mm Width: 2100mm Height: 2100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Mahr Marsurf XR 1, Marsurf SD 26 roughness measuring instrument, measuring instrument, granite measuring plate Mahr Marsurf XR1 with Marsurf SD 26 feed unit: Measurement of roughness, waviness, and profiles Measuring range: ±250 µm Measuring range with longer stylus arm: up to ±750 µm Vertical resolution: up to 0.7 nm Measuring length: 26 mm Feed speed: 0.1–1.0 mm/s Positioning speed: 5 mm/s Motorized height adjustment: 7.5 mm Measuring force: approx. 0.7 mN Cut-off: 0.08 / 0.25 / 0.8 / 2.5 / 8 mm Individual measuring lengths: 1–50 Evaluation: Roughness, waviness, and profile Measured parameters: including Ra, Rq, Rz, Rt, Rp, Rv, RSm, Rsk, Rku, Rk, Rpk, Rvk Software: MarWin Measuring stand: MarSurf ST-D Measuring plate Dimensions: 600mm x 500mm Brand: Bilz Type: F60-50 Max. load capacity: 130 kg You are welcome to visit us for an inspection. We will gladly arrange a cost-effective shipping service for you! You will receive a proper invoice. Hnsdpsz H Uklsfx Andsu For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 1998, functionality: fully functional, Vibratory dryer WALTHER TROWAL G 100 B Year of construction: 1998 Bowl dimensions: Ø 1100 m x height 1100 mm Inside dimensions: width 200 mm x max height 300 mm Motor rotation: 1500 t/min. Motor power: 0,45 kW Max heating capacity: 3 kW In perfect working condition Weight: 250 kg Hnodpfez H Iw Esx Andou

Condition: good (used), Cast iron marble plate Length: 3500 mm Width: 2500 mm Thickness: 300 mm Hsdoz H Iymopfx Andsnu Height on feet: 900 mm Delivered with 12 leveling feet Weight : 6,3 T

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Weight: approx 2 T Hsdpfoz H Iyyox Andjnu 3 same plates available.

Condition: used, Pair of cast iron angle plates Height: 3000 mm Width: 1000 mm Depth: 1245 mm Weight: 3 T / unit Hjdjz H I Abspfx Andjnu

Condition: used, Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T Hnsdpfxez H I Ane Andju

Condition: used, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 450 mm, side roll diameter: 410 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, overall weight: 23,000 kg, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, hardened rollers, Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997 PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH Nameplate Bending capacity -Plate width : 3000 mm -Rolling plate thickness: 40 mm -Prebend thickness: 30 mm --- minimum rolling ID 550 mm depending on plate thickness and width Rolls dimensions: -Useful length 3100 mm -top roll D 450 mm Hnedpsz H N Ifofx Andju -side rolls D 410 mm Accessories installed: Central upper support hydraulic control to hold the plate formed into large diameters Side arm hydraulic to support the large diameter being formed Conical bending attachment with hydraulic control of the angle setting for cone rolling, cone bending stopper hardened pad swing-down on the drop-end of the machine. Technical data Rolls hardening induction treatment, high strength surface of the 3 rolls Power driven total on the 3 rolls with axial gearbox and direct drive hydro-motor each roll Console electric on wheels with centralized commands joysticks and digital readout. Digital readouts of the rolls position bending and pre-bending. Re-rolling system for welded shells rounding. Opening front side hydraulic drop-end to unload the closed shell. Variable speed working roll bending rotation hydraulic speed fast/slow. Voltage supply 3 phase Vac, electric power 40 Hp.

Condition: used, Novalith measuring plate, granite plate, hard rock plate, control plate, 120x80cmx16cm with base cabinet, total height 1m used, as shown in the pictures from stock (may have storage marks) For further technical information, please refer to the pictures. Scope of delivery as shown in the pictures. with invoice The invoice will be enclosed with the shipment. Hnedpjz Hwyvefx Andou

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears Hodpfxexaa I So Andenu - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 14 Stück no. of strokes 20 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch work height max. 800 mm oil volume 150 ltr. total power requirement 11,0 kW weight 5500 kg range L-W-H 4.000 x 2.410 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch Hodpfjxaa Rgsx Andjnu - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 6,5 mm distance between columns 3100 mm 1000 mm Cutting length variabel mm Hnodpfx Ajz Dky Rjndeu cutting gap adjustment variabel mm connected load 12,0 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 3,5 x 2,2 x 1,8 m Hydraulic guillotine shear with - cutting length adjustment - cutting angle adjustment - support arms - squaring arm - rear enclosure - mobile material bin

Condition: good (used), total height: 890 mm, Tension tower, manufactured by Lang 192 x 192 mm square Height 890 mm or 860 mm, excluding adapter plates Hedez E Sahspfx Andonu Base plate 384 x 384 mm Weight approximately 200 kg Several of these tension towers are available.

Condition: excellent (used), Catalog number: 7973 TECHNICAL DATA - Inlet width: 410mm - Inlet height: 210mm - Shaft width: 430mm - Shaft diameter: 330mm - Knife length: 430mm - Number of knives: 2 pcs Hodpfszw I Hkex Andjnu - Sieve dimensions: 50x50mm - Toothed drawing shaft (bottom) - Lower shaft motor: 1.1kW - Toothed drawing shaft (top) - Upper shaft motor: 1.1kW - Vibrating screen - Vibrating screen length: 4160mm - Vibrating screen width: 370mm - Main motor: 45kW - Auto-reverse (adjustable) - Reverse gear - Overall machine dimensions (L/W/H): 2150x1450x1050mm - Overall vibrating screen dimensions (L/W/H): 4160x650x880mm - Weight: approximately 2500kg ADVANTAGES - German-made - Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload - Reverse gear - DTR documentation - Used shredder, very good condition Net price: 73900 PLN Net price: 17186 EUR Net price calculated using an exchange rate of 4.30 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), BLB GmbH, supplier of new and used warehouse technology. You can obtain shelving systems, industrial trucks, accessories and other warehouse inventory from us. In this ad you buy as follows: Used pallet racking / Manufacturer Meta Plug-in system with pre-assembled frame, very quick assembly Positioning : 10 x rack bays with 4 x pairs of beams per bay Hnjdpfx Aop I E Tajndju Bay width 2700mm / beams 120 x 50mm / color black Quantity scaffolding 11 pieces Frame height approx. 7,500mm / depth 1100mm / painted black / pre-assembled 80 pcs. cross beams 120 x 50mm, painted black, incl. safety pins The display is available 2 x ! MORE - SMALL QUANTITIES POSSIBLE ! PLEASE ASK FOR YOUR DESIRED QUANTITIES Further accessories available for an extra charge ground anchor Impact protection Crash barrier Wire mesh Net price: 2950€. ex warehouse Weißenhorn, invoice with VAT will be issued Self-collectors welcome / Free loading / Shipping can be organized nationwide / Please ask for your transport costs.sale of used goods without guarantee & warranty. Errors / prior sale of used goods expressly reserved.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, total height: 850 mm, total width: 1,000 mm, total length: 1,000 mm, overall weight: 1,000 kg, plate height: 160 mm, Granite Plate - Dimensions 1000x1000x160mm - Quality 0 (with certificate) Hedpfovki S Eox Andjnu - incl. steel frame and cabinet - on demand including roof construction (additional € 200,--) - surface refurbished

Condition: like new (used), functionality: fully functional, total width: 1,000 mm, total length: 1,575 mm, table height: 850 mm, plate height: 200 mm, Granite Plate (Thome) - Dimensions 1575 x 1000 x 200mm Hnjdpfx Asynwq Uendsu - Quality appx. Class 00 (will be checked) - with aluminum frame - working level 850 - 900mm - surface refurbished

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 22300 € 428.16 € 1 2030 mm 6 mm 6 mm 5 mm 170 mm 4 kW 3600 mm 1020 mm 1120 mm 2400 kg 3 rolls Hnedpjwirurofx Andju Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: used, length 630 mm width 400 mm Hnsdpfx Anjyrt Dfjdju

Condition: new, plate width 3000 mm plate depth 1000 mm plate height 600 mm weight 4200 kg GERD WOLFF clamping cube 3000 x 1000 x 600 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 T-slot spacing: 140 Number of slots: 10 Edge distance: 80 Weight: 4200 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II Hedpfx Ansymf H Isdjnu Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: new, plate width 2000 mm plate depth 1000 mm plate height 310 mm weight 1650 kg dimensions of the machine ca. 2000 x 1000 x 300 mm Clamping plates - T-slot plates - panel array 2000 x 1000 x 310 mm If you have not found the size you require, you can also send us an e-mail send us an e-mail with the completed PDF form. With this we can can produce an individually manufactured panel for you. Number of grooves: 3 edge distance: 185mm groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0,12 mm Surface machined according to DIN 876 Edge distance: 185mm Groove spacing: 270mm Groove width: 28mm Casting quality HT250 Hodjymf Rmspfx Andonu Flatness less than 0,12 mm Surface machined according to DIN 876/III

Condition: new, Year of construction: 2023, plate width 1000 mm plate depth 5000 mm plate height 300 mm weight of the machine ca. / t Hnsdpfxoyk Ihio Andou required space 5000 x 1000 x 300 mm

Condition: new, Year of construction: 2025, sheet width 1320 mm plate thickness 2.5 mm ST thickness at "Niro-steel" 1.2 mm blade length 1350 mm no. of strokes 34 Hub/min back stop - adjustable max. 825 mm cutting angle 1.5 ° work height max. 810 mm Control konv. engine output 3.0 kW Hnedpfsxabz Hex Andsu weight 1100 kg range L-W-H 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used (!!) Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor - Manual backgauge, including analog position indicator * Adjustment range max. 825 mm - Manual cutting gap adjustment - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connection cable + plug

Condition: used, Year of construction: 1986, length 1000 mm width 750 mm Hedpfx Ajxab Dhendjnu Equipment: - Measuring plate with T-slot - JFA accuracy grade 1+ - Permissible deviation 0.004 / Actual deviation 0.003