Plate Shear - Hydraulic

ERMAK CNC HGS 3100-6

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm distance between columns 3100 mm down holder 14 Stück oil volume 150 ltr. no. of strokes 18 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch total power requirement 11,0 kW Gsdpfx Aoxaa D Hebmsbl weight 6300 kg range L-W-H 4.000 x 2.100 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Gbjdjn Tnzfopfx Abmel Complete with segmented and straight tools

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm distance between columns 3100 mm down holder 14 Stück no. of strokes 18 Hub/min oil volume 150 ltr. cutting angle 1,2 ° control CYBELEC CybTouch Gbjdjxabzgopfx Abmjl total power requirement 11,0 kW weight 6300 kg range L-W-H 4.000 x 2.100 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device (monoblock)

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment Gbsdpfx Abowhm S Nemsl - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: good (used), Year of construction: 1990, CNC Universal Milling Machine MAHO MH600-C Control MAHO 432 with universal clamping table . Spindle holder : ISO 40 Travels : X 600 mm Y 400 mm Z 500 mm Spindle speeds up to 2 000 rpm with work area enclosure Gbedpfeurcybsx Abmel Machine documentation available . Machine from tool shop in good clean general condition Ready for demonstration under power .

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 6 mm rear stop 1000 mm cutting angle 1,2 ° down holder 14 Stk no. of strokes 18 Hub/min Gbodpfx Absvuz Tpomjl oil volume 150 l total power requirement 11 kW dimensions of the machine ca. 3900 x 1900 x 1600 mm weight 5500 kg Equipment: - Hydraulic swing cut shears - ELGO control system - Electric backgauge 1000 mm - Manual cutting gap adjustment - Cutting length limitation - Ball rollers in the table - 2x front support arms - 1x front side stop with scale - Front finger guard, hinged - Rear safety device (protective grille + light barrier) - Foot switch - Operating instructions

Condition: new, functionality: fully functional, power: 47 kW (63.90 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH MOBICOM 30 Mobile Concrete Plant is a concrete production facility designed specifically for projects seeking high mobility and low operating costs, standing out with its compact design. This system, manufactured to fit into a single 40 ft container, requires minimal setup on-site and eliminates the need for a mobile crane during assembly. The MOBICOM 30 can be easily transported between construction sites by truck and continues to operate in the same position during production. The mixer is positioned close to ground level, allowing the produced concrete to be conveniently transferred to the transmixer via a conveyor belt. This compact plant carries all concrete production components except the cement silo. If cement is supplied in bags, production can be easily carried out using the blasting bunker and cement transfer system on the chassis. If desired, MOBICOM 30 can also be used with an external cement silo. It can be equipped with single-shaft, pan, or planetary mixer options according to production needs. The optimized aggregate bunker's low feed height allows the loader bucket to fill the aggregate directly from ground level. SIEMENS and SCHNEIDER branded electronic components, high-quality PLC, and user-friendly automation system make it easy to control all plant operations. MOBICOM 30 - Mobile Concrete Mixing Plant Technical Specifications Production Capacity: 30 m³/hour Transport Dimensions: 8 (L) x 2.3 (W) x 2.5 (H) meters Weight: 8.5 tons Total Motor Power: 47 kW Required Electric Generator: 70 kVA Mixer Options: Pan – Single Shaft – Planetary Aggregate Storage Bunker: 4 x 6 m³ Aggregate Weighing Bunker: 0.75 m³ Aggregate Transfer Belt: 800 x 15,250 mm Mixer Wet Concrete Volume: 0.5 m³ Gbsdpfx Aboxqaa Asmjl Cement Weighing Bunker: 300 kg Water Weighing Bunker: 200 liters Additive Weighing Bin: 20 liters Air Compressor: 300 liters, 4 kW Cement Silo Capacity: 50 – 200 tons Control Type: Fully Automatic Working Area Requirement: 200 m² Why Choose MOBICOM 30 | Mobile Concrete Batching Plant? Developed by CONSTMACH, MOBICOM 30 is one of the most efficient solutions in its class in terms of both mobility and performance. Its compact design, which can be transported in a single container, low installation time, and high production capacity provide significant savings in time and cost. The automation system, supported by SIEMENS and SCHNEIDER components, guarantees long-lasting and uninterrupted operation. Manufactured with the CONSTMACH guarantee, MOBICOM 30 is an ideal investment for construction projects of all sizes thanks to its durability, easy transportability, and flexibility of use. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 1980, sheet width 3000 mm plate thickness 6 mm cutting angle Gsdpfx Abjvxwihemjbl quantity of oil 150 l total power requirement 15 kW weight of the machine ca. 6,2 t dimensions of the machine ca. 3,9 x 2,2 x 1,7 m Front stop on the left, 2 support arms, motorized rear stop, manual adjustment of the cutting gap, 1 set of spare knives

Condition: used, functionality: fully functional, Year of construction: 2004, Hydraulic Guillotine Shear Make: ERMAKSAN Model: HGS 3100x6 Year: 2004 Technical Data: Manufacturer: ERMAKSAN Model: HGS 3100x6 Year of Manufacture: 2004 Sheet Width: 3,100 mm Sheet Thickness: 6 mm Cutting Angle: 1.2° Strokes per Minute: 18 Number of Hold-Downs: 15 Motor Power: 11 kW Back Gauge: 1,000 mm Space Requirement: L 3.8 x W 2.2 (plus support arms) x H 1.6 m Machine Weight: 5.5 t Equipment: Gsdpfjxrtxujx Abmsbl • Angular stop • Support arms • Programmable 1,000 mm back gauge via ELGO controller • Automatic blade gap adjustment • Pneumatic sheet support device • Cutting length limiter • Folding finger guard • Light barrier for rear area safety All information is provided without guarantee. A powered demonstration is available at any time in our showroom.

Condition: used, Year of construction: 2011, EUROMAC MTX FLEX6 Gbodpfoynkqzox Abmol