Used Amtec Labelling Machine Two Sides (Back/Front) for sale (89,057)

Condition: excellent (used), Two side evaporator GEA KUBA -Type: DRS 34637 -Cooling capacity: 46 kW at DT8 -Fin spinning: 7 mm -Fans: 4 x 630 mm Ljdpfx Aov E Hckol Neac -Dimensions: 4500 x 1450 x 700 mm -Block made of stainless steel -Refrigerant: NH3 -Volume: 54 L -Weight: 580 kg -Quantity in stock: 2 -Reference number: CH 535 -Condition: Used in good condition

Condition: used, Two-side evaporator Goedhart Lasdpfx Alsyttc Do Nec -Type: FC38Dp 453-7-230 -Cooling capacity: 25 kW at DT8 -Fin spinning: 7 mm -Fans: 3 x 450 mmm -Dimensions: 2850 x 1050 x 470 mm -Place for electric defrost -Volume: 32 L -Weight: 260 kg -Refrigeration: Freon -Quantity in stock: 7 -Reference number: CH 596 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: used, machine/vehicle number: 006561, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 2800 mm Max feed speed: 40 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr Lasdpfjyzplfex Al Njc

Condition: excellent (used), Two side evaporator GEA KUBA -Type: DRS 44637 Ljdpfxsvw Np Rj Al Nsac -Cooling capacity: 60.7 kW at DT8, 58 kW at DT7 -Fin spinning: 7 mm -Fans: 4 x 630 mm -Dimensions: 4500 x 1550 x 700 mm -Block made of stainless steel -Volume: 72 L -Weight: 650 kg -Quantity in stock: 3 -Reference number: CH 535 -Condition: Used

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 Lodpfx Alsy D A Sws Njac EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 2016, machine/vehicle number: ET223, Used labeling machine AXTRA 720-H9SA4 up to 8000 bph General configuration and operational performance The used labeling machine AXTRA 720-H9SA4 up to 8000 bph delivers high-performance inline labeling for glass containers and, upon request, handles PET or other packaging materials. This fully overhauled labeling machine ensures reliable and precise operation in industrial environments that demand consistent labeling quality. Specifically, the AXTRA 720-H9-SA4 model reaches speeds of up to 8000 containers per hour, depending on sample confirmation by the customer. Operating direction and functional layout The machine operates in a clockwise direction, with containers entering from the left and exiting to the right when facing the conveyor. Therefore, this configuration supports integration into most standard bottling lines used in modern production facilities. Moreover, operators can easily align the layout with existing upstream and downstream equipment. Labeling system and reel handling Lajdpjw Az Dijfx Al Njc The used labeling machine AXTRA 720-H9SA4 up to 8000 bph includes three non-stop labeling stations designed for 400 mm reels and one standard station for 300 mm reels. In addition, each station features sensors that accurately detect opaque labels, ensuring precise placement even with low-transparency materials. As a result, the system delivers consistent labeling quality across multiple formats. The machine can work within the following measurements, with a diameter of 45÷115mm and the heigth of 180÷330mm. Precision mechanics and integrated adjustments The machine uses electromechanical plates to guarantee high precision during operation. Furthermore, it features an electric vertical adjustment system for the upper carousel, allowing operators to perform fast format changes with minimal downtime. In fact, this automation improves productivity and reduces manual intervention. The system also includes a pre-installed optical centering system, which ensures accurate alignment on containers with printed reference marks. Consequently, the machine maintains high visual consistency during label application. Additionally, the machine supports continuous production with 9 active plates, which maintain consistent output and reduce interruptions. Compatible materials and reconfiguration options The machine currently labels glass containers, but our team can modify it to handle PET or other materials upon request. Similarly, we can adapt the system to different container shapes and label types. The existing setup applies front, back, and neck labels, while the fourth station supports additional applications, such as tamper-evident seals or promotional labeling. Therefore, users can reconfigure the machine to meet varied market or client-specific needs. Combination of new and used componen...

Condition: used, Year of construction: 2007, operating hours: 10,000 h, machine/vehicle number: ET212, Used Labeling Machine PE LABELERS Universal Master up to 7500 bph The Machine delivers advanced technology for labeling glass bottles, meeting production demands of up to 7500 bottles per hour. Furthermore, P.E. Labellers manufactured this machine in 2007, ensuring precise operations with its robust design and integrated features. Technical specifications and performance of the Used PE Labellers Labeling Machine The labeller includes eight rotating plates and five labeling stations. Specifically, three stations apply adhesive labels, while two use cold glue. The machine rotates clockwise, which streamlines bottle flow management. Additionally, its manual adjustment system for both the head and labels enables quick adaptations to different formats, thereby enhancing flexibility. Production capacity and configuration The labeller handles glass bottles with a maximum diameter of 120 cm and a standard 0.75-liter format. Consequently, it operates at a top speed of 7500 bottles per hour, making it ideal for medium-scale production lines. Moreover, the system applies labels to the front, back, and neck of each bottle, ensuring a high-quality, professional finish. Labeling method and management in the Used PE Labellers Labeling Machine Laedsvgu Udepfx Al Njc This machine applies labels using adhesive and cold glue methods. Therefore, this dual approach ensures compatibility with a wide range of label designs and materials. Meanwhile, operators manually adjust the system to maintain precise control during each production batch. Current state and operational specifications The machine remains in storage; however, it is ready for immediate deployment. It has recorded 10,000 working hours, yet it still offers substantial operational capacity. Furthermore, its robust build, weighing 2250 kg, ensures stability and durability even under high-speed conditions. Electrical data and power requirements The labeller PE LABELERS Universal Master up to 7500 bph runs on 400 V, with an installed power of 5 kW and a frequency of 50 Hz. As a result, its electrical configuration meets industrial standards, ensuring efficient energy usage for extended operations. Additionally, its energy efficiency supports long-term cost savings. Applications and technical advantages The Used Labeling Machine PE LABELERS Universal Master up to 7500 bph ensures efficient and accurate label placement. Similarly, its versatile labeling stations handle bottles of various shapes and sizes without compromising output quality. Consequently, this versatility makes it a reliable option for many bottling operations. Technicians and industry experts rely on this machine for its performance and customizable configurations. Above all, it represents an excellent choice for demanding bottling applications.

Year of construction: 1980, condition: good (used), Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Area of application: Processing of aluminium and steel profiles -with 1 vertical and 1 horizontal milling motor -per engine: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm Ledpfx Alegfcm Aj Noac -Transport dimensions 800/1200/H1630 mm -Weight: 270 kg

Condition: used, machine/vehicle number: 314, Milling machine, universal milling machine, tool milling machine, two-spindle milling machine, milling machine Lsdpehyut Rsfx Al Noac -Milling machine: Two-spindle milling machine for small parts -Dimensions: see photos -Drive: 0.37 kW each -Coolant device -Dimensions: 1000/850/H1360 mm -Weight: 352 kg

Condition: used, machine/vehicle number: 007685, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Laedpfxey Nkqfe Al Nec Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3200 mm Operating Units Right Side: 15 nr Operating Units Left Side: 15 nr

Condition: used, machine/vehicle number: 007641, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Lsdpfx Aowuz R Hel Noac Operating Units Right Side: 8 nr Operating Units Left Side: 9 nr

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, Power supply: 380–420 V / 50 Hz Total power: 5.5 kW Saw motors: 2 × 2.2 kW Saw blade: Ø550 mm Max. cutting length: 5000 mm Min. cutting length: 360 mm at 90° Cutting angles: 45° and 90° Repeatability: ±0.1 mm Air consumption: 60 L/min (0.5–0.8 MPa) Fully CNC controlled Two saw heads that can operate independently or synchronously Automatic positioning of the moving saw head via servo drive Automatic height measurement system for increased precision at 45° Touchscreen control with clear interface Integrated label printer (traceability & workflow) Infinitely adjustable saw feed Laodpex R U Epofx Al Njc Very stable and heavy machine base

Condition: used, machine/vehicle number: 005854, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Lodpfx Aev Hinxjl Njac Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3300 mm Max feed speed: 30 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: good (used), Brandt edgebander (Homag group) for roll and ABS edge banding. Complete with pre-milling units at entry and all profiling groups with corner rounding units. In perfect working condition. Lsdpfx Aey N Ukiel Nsac

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulic two-roller bending machine Guaranteed capacities: Sheet thickness Bending with material 260 N/mm² Yield point: 2 mm Laedpfx Aljc S N Rio Njc Sheet thickness bending with material AISI 304-316 stainless steel: 1.5 mm Cycle time per part: 15 seconds Technical specifications: Working length: 1000 mm Installed power: 5.5 kW Rolling speed: 7 m/min immediately available from the factory!

Condition: reconditioned (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 3300 Numerical Control / Software ICOS open (Windows XP) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 7 - 35 Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling unit (joint Trimmer) 08.379 (2 X kW 4) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Pressure zone (N.C. adjustment) + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (2 X Kw 0,66) Max 30 m/min Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Ledpfx Asyyya Dsl Nsac Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (1 x Kw 0,5 ca.) 30 m/min Profile Scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 40 Working width (min/max) mm 225 / 2500 Numerical Control POWERCONTROL PC23 Power Touch /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Ledpfx Alev Rpdnj Nsac Distance (center-axes) of the Disappearing Dogs (mm) 1000 Working line (work units support tables), manual adjustment mm 30 – 80 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) + Free Space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + QA65 Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL PK30 (2 x kW 0,8), speed 30 m/min Rough Trimming unit BF20 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FF30 + FF32 (4 x kW 0,4) with FlexTrim Free Space Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 21. Spraying Unit (for polishing liquid) No. 3 Milling grooving unit SF20 (1 x Left + 2 x Right) (3 x kW 6,6) (N.C. adjustment)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 40 Working width (min/max) mm 225 / 2500 Numerical Control NC 21 / HOMATIC Adjustable feeding speed (m/min) 15 - 50 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 1 x Kw 4,5 Hogging Units KD 11 (2 x Kw 6,6) LEFT SIDE: Jumping Milling Unit (for grooving) SF 20 (Kw 6,6 x 1) 0°-90° RIGHT SIDE: Free space Ljdpfx Alehvi E Ij Njac EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "A" (1 + 4 rollers) Snipping (end-cutting) unit HL 04 (2 x kW 0,18) Rough Trimming unit 2 x Kw 0,55 (0°-35°) Multi Function Unit (Profile contour Trimming unit) FK 11 - 2 x Kw 0,4 Profile edge scraping unit PN 20 Glue scraping unit (Pneu) Buffing unit (2 x Kw 0,25)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,6 - 3 Panels thickness (min/max) mm 8 - 60 / Working width (min/max) mm 225 - 3000 Numerical Control Power Control PC 22 /Software: Wood Commander Adjustable feeding speed (m/min ) 15 - 32 Distance (center-axes) of the Disappearing Dogs (mm) 400 Ledpfx Alsp N D Ngs Noac SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 / Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + SERVO Band Pressure zone "A" Edge coils supporting unit (No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit 2 x Kw 0,4 Corner Rounding unit (Contour Trimming) FF 12 (4 x Kw 0,4) LEFT SIDE: 2 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 2) 0°-90° RIGHT SIDE: 1 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 1) 0°-90° Profile edge scraping unit PN10 (PNEU) Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) Milling Unit (vertical Joint Trimmers) UF 20/S2 (2 x Kw 4) EDGE-BANDING PART (for each side): Glueing Unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA glue/ PU glue) Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL 84 (2 x kW 0,22), speed 25 m/min Rough Trimming unit BF10 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FK11 (2 x kW 0,4) Profile edge scraping unit (Multi-profile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11. Spraying Unit (for polishing liquid) No. 2 Milling grooving unit SF20 (2 x kW 6,6) Motorised panel infeed roller conveyor, with panel identification system "HOMAG" Mod. POWER TBL 100/20/25 Ledpfxouhv R Do Al Noac

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Free Space (for Milling unit) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Band Pressure zone - Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Profile edge scraping unit 08.519 Glue scraping unit 08.521 Laodpsd Nt Rqofx Al Nsc Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (4 x Kw 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 Working width (min/max) mm 236 / 1300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 / 50 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling Unit (vertical Joint Trimmers) 08. 0555 max. 3° (2 x 1 kW) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 6 Rough Trimming unit 08. 0555 (2 x 1 kW) max. 3° Fine Trimming unit 08. 055 (2 x 0,66 kW) 30° + 30 m/min Glue scraping unit 08.517 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0,18 kW) Lajdsdh Tfgepfx Al Noc Free space

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Laedpfxowxwyfs Al Njc Panels thickness (min/max) mm 12 / 60 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40. Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 1 x Kw 4,5 Hogging Units KD 11 (2 x Kw 6,6) . Free space EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) QA 34 (FeMa-Tech) Pressure zone (N.C. adjustment) "A" Edge coils supporting unit (No. of reels) 6 Snipping (end-cutting) unit HL84 (2 x Kw 0,22) 0°-30° Rough Trimming unit (2 x Kw 0,55) Multi-Profile Copying unit by N.C (fine and contour trimming) FK 13 (2 x Kw 0,4) revolver 8+8 Free space Profile Scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11 OPTIONAL: Milling grooving unit UF11 (1 x Kw 4)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Laedpel Hydmsfx Al Nsc Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Adjustable feeding speed (m/min ) 10 - 30 Safety and sound-proof enclosures/cabins SIZING PART (for each side): No. 2 Hogging Units (2 x Kw 5,8 ca.) No. 2 Milling units (2 x Kw 4 ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt glue + Multing Unit) Pressure zone (adjustable by CN) Edge coils supporting unit (No. 6 reels) Rough Trimming unit (2 x Kw 1 ca.) Fine Trimming unit 08.055 (2 x Kw 0,5 ca.) 0°-30° No. 5 Milling grooving units (5 x Kw 4 ca.) Profile Scraping unit Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit + Hot Air Heater (to reactivate the color of plastic tape)

Condition: excellent (used), Double side - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 60 Working width (min/max) mm 195 / 1500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) QA 34 (FeMa-Tech) Pressure zone (N.C. adjustment) Type "A" Edge coils support (No. 6 reels) Milling-grooving units SF 20 (HSK63F - Kw 4,5) 0°-90° CN Horizontal Lodpfx Aljwxwxbj Neac Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit MF 21 (2 x kW 0,55) Profile Scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11