Used Automatic 1 Head Seamer for sale (88,144)

Year of construction: 1970, condition: used, Capacity (mm): Ø14 x 200 Ledoh N Si Djpfx Adtehf Production (max): 75 Year: 70's

Year of construction: 1995, condition: good (used), machine/vehicle number: 115, Capacity: 5x30 mm Ljdpfx Aodv Tzmjdtohf Production (max): 350 ppm Bushing Cutoff

Condition: like new (used), functionality: fully functional, machine/vehicle number: 28727, Diameter max: 6 mm Length under head max: 30 mm Speed: 400 ppm Lhodpfx Adsthgkqjtjf

Year of construction: 1976, condition: good (used), machine/vehicle number: 976, Capacity (mm): 8x75 Ljdpfx Ajdv T E Nedtjhf Production (max): 200 ppm

Condition: ready for operation (used), Capacity (mm): 6x60 Lhjdpedv T E Usfx Adtjf

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: Lodpjq Dzi Tofx Adtjhf 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: excellent (used), functionality: fully functional, The Ishida Multihead Weigher is a high-speed, precision weighing machine designed to maximize packing efficiency by achieving the target weight with minimal product giveaway. It is an industry standard for maximizing yield in packaging operations. Precision & Capacity High Weighing Capacity: Features a dual capacity, capable of 4,000 g-2,000 g per head or 8,000 g - 4,000 g per head. Ultra-Low Giveaway: Offers extremely fine precision with a Minimum graduation of 0.5 g / 1.0 g, which minimizes product waste and maximizes profit margin. Flexible Weighing Range: Supports a broad Weighing range of 105 g - 4,000 g / 375 - 8,000 g. Operational Benefits High-Speed Operation: As a multihead weigher, it operates at extremely fast rates by calculating the best combination of weights from multiple hoppers simultaneously. Robust Construction: The "SS(WP)" designation and appearance suggest a stainless steel, washdown-protected (WP) design, ensuring durability and simplified cleaning in a food processing environment. Lhjdpfx Adexxk Tiotef Complex Combination: Uses multiple weighing heads (indicated by the "214W" in the model name, typically 14 heads) to achieve highly accurate weights rapidly.

Condition: used, diameter div. Lhjdpsxyzxfefx Adtof number 44x tool adaptor SK 40

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. Ledpfxsy Drkpj Adtohf The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. Lodjy Drf Hjpfx Adtohf The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: excellent (used), mileage: 1,045,000 km, power: 301 kW (409.25 HP), first registration: 09/2000, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 700 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2000, Equipment: ABS, air conditioning, differential lock, parking heater, power mirror, retarder, = Additional Options and Equipment = - Aluminum fuel tank - Heated mirrors - Driver comfort seats - Differential lock - Differential lock - Speed limiter - Intarder - Radio/CD player - Sleeper cab - Auxiliary heater - ZF Intarder - ZF16 manual gearbox = Remarks = GOOD CONDITION M.A.N. 19.414 FLT XT (F2000) 4x2 TRACTOR UNIT WITH ZF16 MANUAL GEARBOX, ZF INTARDER & AIR CONDITIONING!! 410HP, EURO 3, (6-CYLINDER HEADS)!! ZF16-SPEED MANUAL GEARBOX!! ZF INTARDER!! AIR CONDITIONING!! Ledpfxeygm H Aj Adtehf 700 LITRE DIESEL TANK!! ETC.!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR WORK!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO VIEW OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! () ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Details Number of cylinders: 6 Engine capacity: 11,967 cc Transmission Transmission: ZF16 manual gearbox + ZF intarder, 16 gears, manual transmission Axle Configuration Tire size: 315/70R22.5 Front axle: Max. axle load: 7,500 kg; Steered; Left tire tread: 40%; Right tire tread: 40%; Brakes: disc brakes; Suspension: leaf suspension Rear axle: Twin tires; Differential lock; Max. axle load: 11,500 kg; Inner left tire tread: 60%; Outer left tire tread: 60%; Inner right tire tread: 60%; Outer right tire tread: 60%; Reduction: single reduction; Brakes: drum brakes; Suspension: air suspension Weights Unladen weight: 7,900 kg Payload: 11,100 kg Gross Vehicle Weight: 19,000 kg Functional Cargo volume: 700 l Body manufacturer: ZF Loading platform height: 118 cm Condition Technical condition: very good Optical condition: very good Further information Please contact Sales Department or Erik Engel for additional information.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, lifting height: 10,000 mm, load capacity: 5,000 kg, total length: 10,500 mm, total width: 2,330 mm, working height: 10,000 mm, Equipment: documentation/manual, Abus Overhead Crane – Type: single-girder – Capacity: 2 x 2,500 kg = 5,000 kg – Lifting height: 10 m – Year of manufacture: 2024 – Hoist type: wire rope hoist – FEM/ISO hoist: 2m / M5 Dimensions – Span: 10,500 mm (center-to-center) – Installation height: 500 mm – Width of wheel set incl. buffers: 2,330 mm – Wheelbase: 1,900 mm – Dead weight: 2,230 kg – Suitable for crane rail: 50×30 mm Speeds – Hoisting: 6/1 m/min (2 speeds) – Trolley travel: 20/5 m/min (2 speeds) – Crane travel: 40/10 m/min (2 speeds) Features – Control: radio control – Crane manual available: yes – Condition: like new Lhjdpfey A Hvqox Adtsf – Dismantled: no, on 5 May 2026

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, total length: 6,000 mm, total width: 2,430 mm, load capacity: 4,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane - Type: single-girder - Capacity: 4,000 kg Lhsdpfx Aoy A Huajdtjf - Lifting height: 6 m - Year of manufacture: 2021 - Hoist type: wire rope hoist - FEM/ISO hoist classification: 3m / M6 Dimensions - Span: 6,000 mm (center-to-center) - Installation height: 350 mm - Width of wheel set incl. buffers: 2,430 mm - Wheelbase: 1,900 mm - Weight: 1,310 kg - Suitable for crane rail: 50×30 mm Speeds - Lifting: 0.39 to 4 m/min (stepless) - Trolley travel: 1 to 20 m/min (stepless) - Crane travel: 1 to 20 m/min (stepless) Features - Control: radio control - Crane manual included: yes - Condition: like new, used for only 2 years - Dismantled: early May 2026 - 10 units available - Steel structure and conductor systems also available (3x 35 m or 4x 12.5 m)

Condition: new, 6 GN *1/1 bain marie + heated plate Lhsdpfx Adoxwchvstof -Dimensions: 2335*1100*900 mm -Related options: Top and alcove decoration -Built-in element CCS3G -Built-in element PCV2G -Buffet stand with LED lighting -Glass

Condition: excellent (used), CATALOG NUMBER 7479 Technical data: - shaft width: 410 mm - 4-knife shaft (TERSA) - noise reduction comb - shaft guard - table length: 2610 mm - longer infeed table: 1435 mm - cast iron tables - both tables adjustable - original cast iron tiltable fence - brake - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg ADVANTAGES Ledpfxeyit Apo Adtehf – Made in Italy – 4-knife shaft – brake – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 6691 Ledpoytd Rfefx Adtohf TECHNICAL DATA - spindle diameter: 25mm - spindle working height: 100mm - interchangeable spindle - spindle lock - height adjustable (up/down) - spindle support - hold-downs - original cast iron fence with full adjustment - 4 rotation speeds + reversible (right/left): 3000, 4500, 6000, 9000 rpm - table dimensions + mitre gauge: 1020x900mm - motor: 6kW - extraction port diameter: 2x120mm - dimensions (L/W/H): 1100x1070x1640mm - weight: 658kg – spindle support – mitre gauge – brake – very good condition, used milling machine Net price: 11,500 PLN Net price: 2,740 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7262 TECHNICAL DATA - Top loading hopper inlet 780x620mm - Bottom loading hopper inlet 650x620mm - Outlet for shredded wood Ø160mm - Rotor working width 600mm - Rotor diameter 248mm - Main motor 18.5kW - Pump motor 0.75kW - Number of knives 30 pcs - Knife dimensions 30x30mm - Screen 20x20mm - Press drawer - Electric auto-reverse - Dimensions (L/W/H): 1750x1200x1650mm - Weight 1200kg ADVANTAGES – German-made – Original DTR documentation – Not repainted – Auto-reverse system – Press drawer – Very good condition – Used wood chipper Original photos Net price: 38,900 PLN Net price: 9,260 EUR, depending on the exchange rate (4.2 PLN/EUR) (Prices may vary with larger currency fluctuations) Lsdpfx Ajytf Ixedtehf

Condition: excellent (used), CATALOG NUMBER: 7480 Lhedpfxeyg Ip Es Adtsf Technical data: - Track width: 360mm - Shaft width: 350mm - Max. blade diameter: 350mm - Blade bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm From above: - Pawls - Driving/sprocket shaft - Pawls - Shaft with saw blades - Sliding, pressure shaft From below: - Rollers in front of the table, 2 pcs - Guide - Pawls - Track - Central track lubrication - Electric height adjustment of saw blade shaft - Electric height adjustment of the body - Stepless feed speed control - Extraction outlet diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight: approx. 4000kg ADVANTAGES – Czech production – Used multirip saw – Very good condition Net price: 30,900 PLN Net price: 7,360 EUR (depending on EUR exchange rate of 4.2) (Prices may change with large fluctuations)

Condition: refurbished (used), EFI Vutek Pro32R + LED Roll-to-Roll Printer 12 Ricoh Gen 5 Printheads 7pl Utradrop - 1200 dpi Fully refurbished with all printheads newly replaced Speed up to 256 m²/h Year of manufacture: 2019 (installed in 2020) Printer is thoroughly cleaned: carriage completely fitted with new printheads and tubes; filters and firmware updated, etc. Lsdpfx Aoymz A Sedtshf

Condition: ready for operation (used), Diameter range: 52 mm – 65 mm Height range: Production capacity: up to 3000 c.p.h. No. of heads: 18 Tooling for approx. 52 mm (202) Lodpfx Adsyv An Ajtshf Filler and seamer available separately or together

Condition: used, Drilling capacity: 35/40 mm Lhsdpfeb N Ahlsx Adtof Spindle mount: MK 4 throat: 230 mm Table size: 1050 x 625 mm Table height above floor: 560 mm small / large distance between table and drilling sleeve: 549/960 mm quill stroke: 170 mm spindle speed infinitely variable: 50 - 800 rpm space requirement: 1050 x 1000 x 2170 mm Weight: 250 kg

Year of construction: 1999, condition: ready for operation (used), An automatic single-head underfloor saw Emmegi including a chip extraction system is available. Cutting angle: 90°, feed travel: 0mm-1000mm, positioning accuracy: +/-0.5mm, saw blade diameter: 500mm, motor power: 6.6kW, weight: approx. 1000kg. An on-site inspection is possible. Ljdpfx Aeyz Apqjdtjhf

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Lhodpfx Adoy E Exietef Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: excellent (used), Year of construction: 1996, Description For sale is a fully functional and very well-maintained gas burner by Weishaupt, including gas train (Dungs DN 20) 1. Burner type: WM-G3/1-E Output: 80 – 550 kW Ledjhx Uhwspfx Adtehf Version: ZMD-NA Year of manufacture: 1996 Connection pressure: 15 – 500 mbar - Delivery available on request - All technical data can be seen in the pictures Preferred sale to dealers, commercial users, or for export. All information provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors.

Condition: excellent (used), Year of construction: 2008, Fully functional and very well-maintained gas burners of the Weishaupt brand G3-(630kW) with Dungs DN 40 gas line are for sale. - Weishaupt: G3/1-E GAS BURNER - Burner type: G3/1-E - Version: ZD Lhjdpfxewgylye Adtsf - Output: 90-630 kW - Year of manufacture: 2008