Used Band Slicing Machine for sale (65,370)

Condition: good (used), Year of construction: 1977, workpiece weight 279 KG length ca. von Bett bis Lynette mm 189 € . Itodsrfd U Rspfx Ab Sjg max durchlass 369 mm

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. Iedpfx Absycqhco Sjtg The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Itedpew I H Rkefx Ab Seg Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: new, Edge banding machine (with hinge holes passing function) (new) Type F-2 Thickness of panel 10-55 mm Edging thickness 0,4-2 mm Feeding speed 13 m/min Air pressure 0,8 MPa Total install power 10 kW Ijdpfxjxv Udae Ab Sstg Panel width ≥ 80mm With pre-milling Transport dimensions 3700x600x1250 mm Weight 960 kg Price 11200 Eur (EXW Jonava, Lithuania)

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, profile holder edge banding machine -Manufacturer: Homag, profile holder from edge banding machine BRANDT KM 35 -Individual components: see photos Iodjgy T Nbspfx Ab Sotg -Dimensions: 665/540 / H375 mm -Weight: 30 kg

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Technical Data: Technical specifications Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Belt dimensions 2655x27x0.9 mm Belt speeds 24/36/49/71 m/min Ijdpfx Aoy En E Seb Sotg Cutting angle range From 0 to +45 degrees Machine packaging dimensions 1420x500x1150 mm Weight 151/202 kg MANUAL IN ENGLISH

Condition: good (used), overall weight: 400 kg, Skinetta ASK 450 Tension banding machine Purpose of the machine The tight banding machines in the SKINETTA series are used to band (wrap) individual products or several individual products tightly with polyethylene film. In contrast to shrinking machines, the wrapping film is pulled tightly around the pack before sealing. This tightening is the main advantage of the process. The result is up to 20% less film consumption. A particular advantage of the patented SKINETTA tightening system is the infinitely variable, fine dosage. The sealing (welding) of the film takes place in a very small space and a clean sealing seam with very small protrusions is created. By connecting a SKINETTAther or SKINETTAshrink heating hood downstream and using a correspondingly wide film, the excess film protruding beyond the container can be shrunk to the side. This process makes the pack even more stable and prevents individual products from falling out of the sides of a grouped pack. Full closure of the packs by sealing, sealing and side folding is possible with appropriate additional equipment. The range of SKINETTA stretch-banding machines comprises 6 basic types for film widths from 25 mm to 200, 290, 440, 590, 790 and 1250 mm. In addition to the single-track version, two to four-track systems are manufactured to increase output. - In the SK series (semi-automatic), the products are grouped on the machine table by an operator. The insertion into the film and the subsequent stretch-banding process is triggered either by a foot switch or a two-hand control, subsequent full automation is possible (except for type SK 200), - In the ASK series (fully automatic), the products are fed, grouped and then banded fully automatically using appropriate additional equipment. A modular system of feeding, grouping, forming and special equipment based on over 20 years of experience allows adaptation to the most diverse customer tasks with tried and tested standard elements. Technical data Machine dimensions (basic machine) Length: 1670 mm Width: 980 mm Height: 1700 mm Table height: 1700 mm Weight: 400 kg Iedpfx Abep U T Ifo Sstg Power connection: 400 Power requirement: 6.1 kW Additional equipment: Bar chain conveyor Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580 Itedpfoudim Dsx Ab Ssg

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Itodpfx Aemrp Tleb Seg Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 400V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Ijdpey Emgbofx Ab Setg Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Equipment and technical data: - Automatic edge feeding - Cartridge glue system - Pressure unit with 4 rollers - Cross-cut saw unit - Flush trimming unit - Combination trimming unit (flush/chamfer/radius) - Radius scraper - Buffing unit - Edgeband thickness: 0.3 - 20 mm - Maximum edgeband height: 66 mm Itedpoyncpvjfx Ab Sjg - Minimum edgeband length: 200 mm - Feed speed: 8/16 or 12/24 m/min Availability: short notice Storage location: 63934 Röllbach

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, cutting range round steel at 45°: 450 mm, cutting range round steel at 90°: 450 mm, cutting range square steel at 45°: 420 mm, cutting range square steel at 90°: 450 mm, saw band length: 5,780 mm, saw band width: 41 mm, Semi-automatic sawing machine with 1-sided miter. (Also available with 2-sided miter.) Hydraulically operated material clamp. Isdpfxsvy Swio Ab Sotg Hydraulically operated saw frame. Brand: KMS Type: KMY DG 450 Saw motor: 3 kW Height of support table: 888 mm Max / Min clamp opening: 0 / 740 mm Clamp height: 240 mm Mitre: 1 side Down speed: Continuously adjustable Cutting speed: Continuously adjustable, 20 - 90 m/min Band dimensions: 5780 x 41 x 1.3 mm Weight: ± 1600 kg Capacity: 90° (right angle): Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 680 mm 60°: Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 570 mm 45°: Round: Ø 450 mm Square: 420 x 420 mm Rectangle: 350 x 480 mm 30°: Round: Ø 350 mm Square: 330 x 330 mm Rectangle: 240 x 450 mm Incl. 2 short roller tracks. (not shown)

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW Itedpfxei D Di So Ab Seg TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Itodpfjwq A Dyox Ab Sog Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: as good as new (ex-display), Edge banding machine as demo unit 5 units (aggregates): Joint trimming unit incl. AIGNER diamond joint cutter heads, with Konstantin DIA interchangeable knife system and controlled edge air-blast nozzle behind the second joint cutter head. End trimming unit: 1 motor, 2 saw blades Radius milling unit with Easy Set adjustment system Radius scraper unit, retractable, incl. - Extraction device with chip collection box for scraper shavings - with Easy Set adjustment system - 2 digital readouts Flat scraper unit with 4-way usable scraper blades. The unit is retractable. General features: - High-gloss package: tracing rollers for the radius milling unit, radius scraper unit, and flat scraper unit Itsdpfx Abow Rcmyj Sjg - Large viewing, noise, and safety enclosure for all processing units and the glue pot - Teflon-coated glue pot with energy-saving mode in standby - Glue application roller with feed screw for long and tall workpieces - Pressure zone with motor-driven 1st steel pressure roller + 1 rubber roller - Reel shear for edging 44 x 2 mm Technical data: Edge thickness: 0.4 – 2 mm Min. panel width: 120 mm Min. panel length: 90 mm Min. panel thickness: 10 mm Max. panel thickness: 40 mm Feed speed: 7 m/min Extraction connections: 3 x 150 mm Connection: 8 kW - 400 V / pneumatic: 6 bar

Condition: good (used), Alber sharpening machine for band saw blades saw blade width 50 - 206mm tooth pitch 20 - 50mm Itodeglui Aopfx Ab Sjg

Condition: excellent (used), Fully automatic band saw graderOppligerType PBS 860 Itsdpfx Abed Sr Sio Sog

Condition: new, Year of construction: 2026, power: 4 kW (5.44 HP), input voltage: 400 V, type of input current: three-phase, total height: 34 mm, total length: 2,350 mm, total width: 1,250 mm, overall weight: 1,250 kg, table height: 600 mm, coolant pump power: 60 W, cutting range round steel at 90°: 400 mm, cutting range square steel at 90°: 400 mm, saw band length: 4,650 mm, saw band width: 1 mm, ROGI SAWING MACHINE TYPE WDS-400 SEMI-AUTOMATIC Saw blade size ----- 4650 x 34 x 1.1 mm Sawing speeds ----- 19/30/50/65/90 m/min. Motor power ----- 4 kW - 400V - 3 phase Weight ----- 1250 kg Cutting capacity ----- 400 mm / 500W x 400H mm INCLUDES Bimetal band saw blade Workpiece stop Saw blade guide with carbide inserts Hydraulic clamp Coolant pump Hydraulic downfeed cylinder Motor protection switch Automatic end stop Isdpfx Abex N Iawe Sstg

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 1000063009, functionality: fully functional, edge thickness (max.): 5 mm, transport length: 3,800 mm, transport width: 700 mm, transport height: 1,700 mm, TECHNICAL DETAILS Number of units: 5 Max. edge band thickness: 5 mm Max. panel thickness: 50 mm Isdpow Tzifefx Ab Setg MACHINE DETAILS Documentation available: No CE marking present: Yes Serial number: 1000063009 Voltage: 400 V Current consumption: 12.3 A Power: 6.8 kW Transport dimensions: 3,800 mm x 700 mm x 1,700 mm (L x W x H) Transport weight: 1,000 kg Number of transport packages: 1

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Ijdpev Sv Enofx Ab Sjtg Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: good (used), Year of construction: 2011, Bandall BA 24 / 15-50 Banding machine One of the most recognizable wrapping machines in the world, the market leader. The device works in manual or automatic mode. Production version, for high loads. The machine is mounted on an independent structure, with wheels for transport. Work on Jumbo Rolls. After inserting the material, the machine wraps it around it, squeezes it and seals it, creating an elegant-looking package. It is perfect for packing business cards, leaflets, etc. Control via the LCD panel. Manufacturer: Bandall Model: BA 24 / 15-50 Year of production: 2011 Capacity: 36 cycles/min Belt Width: 50 mm Max. product dimensions (WxH): 320x155 mm Iodjtk Ikdspfx Ab Setg Machine Dimensions (LxWxH): 1.000x600x1.500 mm Machine Weight: 100 kg.

Condition: good (used), Mosca RO-M Fusion 800×600 Banding Machine This machine is 100% operational and ready for production. Itodpfx Absywdtcj Sog Manufacturer: Mosca, Germany. Manufactured in 2019. This device is indispensable for shipping, for wrapping heavy parcels, such as leaflets or catalogs. A 5mm PP strap reinforces the packaging and creates a handle that makes it easy to grab and transport. Rotating control panel Adjustable tape feed length and tension 230V power supply Weight: 240kg

Condition: good (used), NM-420 W30 Banding Machine This brand new machine is based on proven Western designs. Year of manufacture: 2025. The device operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Cycles per minute: 26 cycles/min Itodoywdq Uopfx Ab Ssg Dimensions of the banded product: 400 x 200 mm The kit includes tapes and an instruction manual.

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Itjdpfx Aeu Ekbnsb Sog Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Itsdpfx Aewz Ic Aob Sjg Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4)