Edge banding machine

Holz-Her Sprint 1317-2

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 18 m/min, edge thickness (max.): 8 mm, product height (max.): 45 mm, product length (min.): 180 mm, TECHNICAL DETAILS Control: Edge Control with 18.5" touchscreen color screen (16:9) Itedpfx Ahevzyble Ujr Control panel: Swiveling Program memory: Available Pressure bridge adjustment: Motorized Feed: Using a transport chain Feed speed: 8 - 18 m/min Workpiece support: Extendable Infeed ruler: Motorized adjustable Edge thickness of rolled goods: 3 mm Edge thickness of strip goods: 8 mm Maximum edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Distance between workpiece support: 470 mm Support plate Ø for edge material: 800 mm Milling and processing units Joining milling unit: 1961 Cutter type: Diamond jointing cutter in synchronous and counter-rotating motion Workpiece height adjustment: Automatic Edge feed & Glue application Edge feed: 1903 Pre-capping: Up to 3 x 45 mm (depending on material) Glue application system: 1905 Multi-System Glue height adjustment: Automatic with sensing nozzle Pressure regulator: For regulating the cartridge contact pressure PUR glue use: Possible Printing unit & cutting unit Printing unit: 1913 MOT Drive: 1st roller driven Cutting unit: 1918 with pneumatic adjustment Cutting saw: Pneumatically pivotable Milling and edge processing Multifunctional unit: 1824 MOT 4 Milling cutter: Multifunctional milling cutter radii 1,2,3 mm Corner copying unit: 1832 Corner copying function: Up to 3 mm edge thickness Radius scraper: 1929 MOT 2 Tactile roller adjustment: Motorized (horizontal) Pneumatic adjustment: Top and bottom separated Cleaning & polishing Chip collection box: For radius scraper Surface scraper: 1964 (for removing the adhesive residue for a clean adhesive joint) Extraction hoods: Available Spray device: 1856 for the inlet and outlet area Buffing unit: 1940 (for cleaning and polishing edges) Performance data & extraction Cutting knife for rolled goods up to: 3 mm Heating time: 3.5 min Power of jointing cutter: 2 x 2 kW Power of cross-cut saw: 2 x 0.22 kW Power of milling station: 2 x 0.35 kW Power of corner copying: 0.22 kW Extraction nozzle of jointing milling unit: 120 mm Extraction nozzle of milling unit: 70 mm Extraction nozzle of scraper unit: 70 mm MACHINE DETAILS Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm EQUIPMENT - Swiveling control panel - Program memory - Motorized pressure bridge adjustment - Feed by means of transport chain - Extendable workpiece support - Motorized infeed ruler - Diamond jointing cutter in synchronous and counter-rotation - Automatic adjustment to workpiece height - Pre-cutting up to 3 x 45 mm (depending on material) - Glue application system with automatic glue height adjustment and sensing nozzle - Pressure regulator for cartridge contact pressure - PUR glue can be used - Printing unit with driven 1st roller - Cutting unit with pneumatic adjustment - Pneumatically swiveling cutting saw - Multifunctional unit for radii 1,2,3 mm - Corner copying unit up to 3 mm edge thickness - Radius scraper with motorized sensing roller adjustment - Chip collection box for radius scraper - Surface scraper for clean adhesive joint - Extraction hoods - Spray device for inlet and outlet area - Buffing unit for cleaning and edge polishing

Year of construction: 2008, condition: used, Four-sided planer Weinig Powermat 500 8.000 rpm | CNC | PowerLock Technical data: Itodpfxjhu Ewyj Ah Usr Used machine: Year 2008 Control system: PoweCOM Touchscreen. Feed rate: Feed rate 5 - 30 m/min. Motor: 4 kW Working range: Working width: 20 - 230 mm Working height: 8 - 120 mm 1 spindle: first lower tool holder speed: 8 000 rpm motor: 5,5 kW Tool holder: standard 2 Spindle: First right tool holder Speed: 8 000 rpm Motor: 5,5 kW Tool holder: PowerLock 3 Spindle: First left tool holder Speed: 8 000 rpm Motor: 5,5 kW Tool holder: PowerLock 4 Spindle: First upper tool holder Speed: 8 000 rpm Motor: 7,5 kW Tool holder: PowerLock 5 Spindle: Second lower tool holder Speed: 8 000 rpm Motor: 5,5 kW Tool holder: PowerLock Radial and horizontal CNC controlled adjustment for spindle: 2,3,4,5. Dressing table: 2 000 mm long CE certified. Electrical cabinet . Machine without tools.

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Itjdevvkfdspfx Ah Usr

Condition: used, Year of construction: 2011, operating hours: 744 h, overall weight: 1,500 kg, fuel: electricity, No. 04437 Chipper / Shredder Balduf PZ 63-1 Used, year of manufacture 2011, only 744 operating hours Made in Germany For various materials, e.g. wood, plastic, etc. Hopper opening 800 x 630 mm Electrical connection 400 V / 19.25 kW Rotor diameter 260 mm Rotor width 630 mm 30 interchangeable blades 30 x 30 x 15 (15 standard, 15 concave) Sieve diameter 30 mm SPS Siemens S 7 200 control system Automatic & manual operation possible Hydraulic operating pressure 160 bar Suction nozzle diameter 160 mm Isdpeuxbccofx Ah Ujtr Including technical documentation Transport dimensions approx. 1800 x 1250 x 1800 mm LWH Weight 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Iedpfxevvkfwe Ah Uotr

Condition: used, No. 04488 Veneer press Ott JU 2512 Used Heating plates 2500 x 1200 mm LW Isdpexbh Atofx Ah Ustr The plates are heated electrically, power per plate 8.4 kW Total pressing pressure 90 tons Specific pressing pressure 3.0 - 4.0 kg/cm2 4 pressure cylinders, each 90 mm in diameter Opening width 400 mm Button control for opening - stop - closing Circumferential emergency stop rip cord Technical documentation available Transport dimensions approx. 2900 x 1450 x 2000 mm LWH Weight approx. 3600 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Emulsion spray at the inlet and outlet Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min Itodpsv Szt Dsfx Ah Uer Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movement

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: - Control unit with 10.4" touchscreen color display - Extendable workpiece support - Motorized, position-controlled pressure beam - Chain feed with feed speed of 12 m/min - Ball-bearing roller support plate, diameter = 770 mm - Double-motor jointing milling unit / 2 x 1.1 kW - Edge feed for coil and strip material, 0.4 – 10 mm (edge detection via infrared sensor) - Teflon-coated glue unit - Premelting unit for EVA adhesive - Exchangeable glue unit for EVA - Exchangeable glue unit for PUR - Motorized, position-controlled pressure unit - Double-motor end cutting saw unit / 2 x 0.50 kW - Double-motor multifunctional unit for radius, flush, and chamfer milling / 2 x 0.75 kW - Corner processing unit - Radius scraper Iodpow Nadtsfx Ah Uetr - Surface scraper - Double-motor polishing unit (buffing) - Spray unit for release agent at the machine infeed side - Spray unit for cleaning agent before the polishing unit Availability: short notice Location: 65439 Flörsheim

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Itedpfx Ahjwka Nyo Uor Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: excellent (used), Year of construction: 2007, Panel saw HOLZMA HPP250 320x320 cutting length 3200 mm cutting width 3200 mm 3 air tables power control year of manufacture 2007 Itedpfx Ahsxugdve Uer