Used Bang & Co Stretch Wrapper for sale (27,594)

Condition: ready for operation (used), Year of construction: 2003, A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible. Ppjdpfjvtqq Uox Adlsr

Condition: ready for operation (used), A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder. The machine is partially dismantled. Toothed belts must be tensioned and partially replaced. Toothed belt wheels are disassembled and must be installed. On-site inspection is possible. Psdpfx Ajvtqrljdlspr

Condition: excellent (used), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, Automatic toilet paper and kitchen towel packing machine We have used it for less than 10 hours. After purchase, it did only a couple of test runs and then was stored in a dry warehouse for later use. It had never been used since. There might be some bends on the machine since it has been moved a couple of times. Specification Power 220V 50Hz Packing: Toilet paper 2/4/6/8/10 rolls per pack with handle, Hand towel 2/4 rolls per pack with handle Packing in film, overwrapping with meld line on the back. It uses opp film, a max roll diameter of 30cm, and a thickness of 0.03 - 0.10 by the specification, no idea about other materials - have not tested any. For setting up and configuration the machine you will have to contact the manufacturer Ppsdpfxsuyhf Hs Adler The machine can be seen, powered on, and set to automatic/manual running. User manual is available, have videos from the manufacturer only

Condition: ready for operation (used), Used heatable/coolable pressure vessel with Atex agitator and insulation Last intended use: Pharmaceuticals, cosmetics Ppodstdgkxopfx Adljr Article number: 10815 Volume: 5600 liters Type: standing on 4 feet Material (in contact with media): 1.4571 / AISI316 Design: with double jacket and insulation Operating pressure according to nameplate: +1/+3 bar Max. operating temperature: 0/ +150 °C Container dimensions: Manhole: 500mm Outer diameter: 2000mm Total height: 2870mm Total width: 2250 x 2060mm Cylindrical height: 2000mm Materials: Inside: 1.4571 / AISI316 Outside parts: 1.4301 / AISI304 Facilities: Nameplate: Yes ATEX agitator Power: 22KW Speed: 1465/min Agitator: Propeller 2x spray head Connector

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: JS-GL4560FM, Year of construction: 2013, Used Shenzhen Juisun semi-automatic glass screen printer (Precise Electromotion Screen Printing machine) Podpfx Adexiv Iyslepr Manufacturer: Shenzen Juisun Screen Printing Machinery Co., Ltd. Model: JS-GL4560FM Voltage: 380V (20A) Includes extra spare parts (see photos)

Condition: excellent (used), Year of construction: 2017, operating hours: 150,050 h, functionality: fully functional, controller manufacturer: Heidenhain, controller model: iTNC530, rotary table diameter: 500 mm, overall weight: 13,000 kg, spindle speed (max.): 14,000 rpm, operating hours of spindle: 6,950 h, coolant supply: 20 bar, spindle nose: HSK 63, number of slots in tool magazine: 60, Equipment: chip conveyor, oil mist separator, rotational speed infinitely variable, • Condition: Excellent condition • Operating hours: 6,950 • KESSLER rotary table, Ø 500 mm • Tool magazine: 60 stations, HSK-A63 • Internal coolant supply: 20 bar, with band filter system • Coolant system: Automatic coolant level monitoring • Air through spindle Pedsx Hg Ibopfx Adlspr • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe system), incl. workpiece measurement preparation • Collision monitoring: POS DCM module • Media feed: 3-channel media feed in the center of the table • Viewing: Rotary inspection window • Handwheel Please send us an inquiry directly via our website if you are interested in the machine. Due to technical reasons, direct inquiries for a quotation via third-party platforms are difficult and may be delayed.

Condition: used, Year of construction: 2002, machine/vehicle number: BM5008, BM%==( Manual operation Hot-melt gluer for book spines spine milling station for books H440xW280xT40mm Psdpfeh S Drgsx Adljpr

Year of construction: 2008, condition: ready for operation (used), Produces light sources in the form of tubes, product dimensions: 2-4x100-1200mm, including coating, cleaning, sealing, high vacuum station, labelling station and Compressor ALMIG LENTO 15. Pedpfx Aog Tvy Djdlopr

Condition: used, Make by : Tsuruta Electric : TBX-25K (06017) Podpfx Aedc A Rrjdlspr

Condition: used, Technical details: voltage: 380 V / Hz weight: ca. 0,43 t dimensions L x W x H: 1,1 x 0,8 x 1,7 m Ppedpfou Tr T Eex Adlsr Stationary welded steel construction Type 80 mm steel profile Application: Separation of mineral materials (sand) according to grain size operation by vibration 3x attachments Ø 610mm 1x separation pipe Ø 100mm attachment feeding screen Ø 580mm grain size 2mm Additional Separator attachment 5.5mm; 4.0mm and 3.5mm sieve inserts are optionally available for 150.00 Euro per sieve. *

Year of construction: 1990, condition: used, Technical details: voltage: 380 V / Hz weight: ca. 0,1 t dimensions L x W x H: 0,75 x 0,80 x 1,8 m Stationary welded steel construction Type 80 mm steel profile Podou Tr Trepfx Adlepr Application: Separation of mineral materials (sand) according to grain size operation by vibration 3x attachments Ø 610mm 1x separation pipe Ø 100mm attachment feeding screen Ø 580mm grain size 4mm Additional sieve inserts 5mm and 3mm are optionally available for 150.00 Euro per sieve. *

Condition: new, Year of construction: 2023, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 540 mm, workpiece weight (max.): 6 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, rapid traverse Z-axis: 32 m/min, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, spindle speed (max.): 12,000 rpm, table load: 500 kg, YCM vertical machining center model NXV-1020A Fanuc control MXP-300FB+ Screen size 15" 12,000 revolutions 30 tools 20 bar internal cooling Hinged belt chip conveyor Spindle oil cooler Podpfx Aerfdckedlspr Oil separator Steep taper 40 - DIN-69871A or BBT-40 Machine-side cable preparation for 4th axis connection Demonstration machine at a special price Sale only possible in Germany and Austria

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, Key Facts: Lachenmeier Hood Stretcher Pallets per Hour: 50+ Frame Size: 3,000 x 2,400 mm Max. Load Height: 1,500 mm Ppedpfxsvb Tz Eo Adlor Max. Load LxW: 1,200 x 1,000 mm Stretch Hood Film: 1 Special Features: refurbished stretch hood machine long-lasting spare parts by RHM Packaging Availability Now in stock at RHM

Year of construction: 2020, condition: new, Title Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate and Frame Filter Press – Year 2020 – NEW / Unused Ppedpfxsx Ihufo Adlor Short Description For sale: unused, factory-sealed plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in brand-new condition, have never been commissioned, and remain in their original packaging from the factory. Manufacturer Strassburger Filter GmbH + Co. KG (Germany) Model / Type SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of Manufacture 2020 Serial Number Among others: 032003303920 (additional serial numbers available) CE Marking Yes Condition Brand new / unused Factory-sealed Never installed, never used for production Stored in warehouse Quantity Available 4 identical units available New Price Original price €94,000 per unit (Total value for 4 machines: €376,000) Design / Material All stainless steel Plate and frame filter press Gasketed plates Pharma / biotech specification Hydraulic closure incl. hydraulic unit CE-compliant Technical Data Plate format: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Weight (filter frame): approx. 480 kg Weight (plate pack): approx. 120 kg Plate Pack 14 filter plates 13 filter frames 1 end frame 1 partition plate 28 filter layers per setup Hydraulics & Drive Hydraulic closure Hydraulic power unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Solenoid voltage: 24 V DC Compressed air requirement: 3.0 bar Connections Product inlets and outlets: DN25 Vent / drain: DN15 Connections according to DIN 11864-2 Drip tray included Areas of Application Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location Germany Inspection by appointment Immediately available

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Podpjndn Agofx Adlepr Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material Ppodpfx Adjng Exasljr bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: excellent (used), Year of construction: 1978, operating hours: 60,000 h, functionality: fully functional, This listing offers a Kim Ho Sheng Industrial Co Ltd rubber and plastic open mixing mill, model ROLL 16x42'' L, manufactured in 1978. The machine features two large metal rollers designed for mixing rubber and plastic materials. It is equipped with a substantial exhaust hood and duct system positioned above the rollers to provide ventilation during operation. Control handles are located on both sides of the machine, allowing for manual adjustments and operation. This mixing mill is suitable for industrial rubber and plastic processing applications where open mixing mills are required. Pedpfeyqyb Uox Adljpr

Year of construction: 2024, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 86-731-85552647/18153792542, We are a company based in 9000 St. Gallen (Switzerland) and imported this planetary ball mill from China in 2024. The unit is brand new and unused. We have switched the machine on and let it run empty for a few minutes to verify its functionality. It comes with 4 x 25-liter nylon containers. Additionally, 120 kg of zirconium beads with a 1 mm diameter are available. ~ Ppodpfx Adsyilnzelsr Manufacturer's Description: The YXQM series of planetary ball mills for mass production is a machine designed for production applications, built to handle medium-scale capacities to meet industrial requirements. It facilitates the smooth transition of materials from laboratory scale to full production, ensuring consistency and repeatability of processes and thus reliable material quality. The equipment is widely used across new energy, metallurgy, electronics, ceramics, geology, mining, construction materials, chemical industry, light industry, cosmetics, environmental protection, and other enterprise-level material production sectors. Extremely high centrifugal forces inherent to planetary ball mills generate intensive grinding energy, resulting in short milling times. These machines are ideal wherever the quality control process demands the highest standards of purity, speed, fineness, and reproducibility. This series can be equipped with vacuum jars, allowing samples to be ground under vacuum conditions. It is well suited for research tasks at scientific institutes, universities, and industrial R&D laboratories to verify the feasibility of scale-up to mass production, as well as for routine operations such as mixing and homogenizing soft, hard, brittle, or fibrous materials—from laboratory tests through to production. - Key Features: - High-performance, nanometer-scale grinding - Digital display, intuitive operation, precise parameter setting - Variable speeds from approx. 10 to 440/360 rpm, speed ratio 1:2 - Batch processing with up to 4×6/9 L samples, simultaneous processing of 4 materials - Electric lid opening and integrated crane for easy and convenient operation - Storage for 3 modes and 15 programs - Power failure protection with memory function and automatic restart - Suitable for dry, wet, vacuum, and protective atmosphere grinding - Machine stops upon lid opening; automatic interlock prevents accidental release - Equipped with rollers and swiveling feet for easy movement and stable operation Applications: Grinding, mixing, homogenizing, colloidal milling, mechanical alloying, mechanochemistry Fields of Application: New energies, geology/metallurgy, glass/ceramics, engineering/electronics, building materials, environment/recycling, agriculture, chemistry, medical, biology Feed material: Soft, hard, brittle, fibrous – dry or wet Size reduction principle: Impact, friction Feed size: < 5 mm soil, < 10 mm Final fineness: For colloidal milling, samples below 0.1 micron Number of grinding stations: 4 Grinding methods: Dry grinding, wet grinding, vacuum grinding, grinding under protective atmosphere

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 6,000 mm, fuel type: electric, HT-30 Electric Forklift with Clamp — 3.5T / 6m Lifting Height The HT-30 is a robust, high-performance electric forklift engineered for demanding warehouse and industrial environments where precision high-level lifting is required. Its construction features a rigid 120 mm H-section steel mast, providing outstanding stability and long-term durability in any operating condition. Key Specifications: - Lifting capacity: 3,500 kg Psdpfxjyymkio Adlopr - Three-stage mast with a lifting height of 6 metres - Fork length: 1,220 mm - Integrated carrying clamp Powertrain & Drivetrain: - 10 kW AC lifting motor - 7.5 kW AC drive motor - Highly wear-resistant solid tyres for extended service life Safety & Comfort Features: - LED work lights, left/right turn indicators, brake lights, and driving lights - LCD instrument panel - Electric horn - Operator seat belt The three-stage mast and 6-metre lift make this forklift ideal for high-bay storage applications. The AC drive system ensures minimal maintenance, regenerative braking, and smooth, precise load handling. The integrated carrying clamp increases versatility for handling non-palletised goods such as rolls, drums, or bales. Condition: New Availability: In stock

Year of construction: 2008, condition: good (used), Machine type: Finishing machine Manufacturer: Supfina Grieshaber GmbH & Co. KG Model: 622/1 Serial number: 760001 Year of manufacture: 2008 Available immediately Ex site for self disassembly Psdpolrt Saefx Adlspr Optionally we can offer dismantling and loading

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Pjdpfepu A D Aex Adlepr Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm Podpfx Adopbbc Holepr - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Year of construction: 2023, condition: like new (used), machine/vehicle number: 530211, Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Test method Vickers → Eyepiece 10X → automatic Revolver → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED lighting → Power cable → Accessory case → Operating instructions OPTIONALS: → VMS3-Software (Video-Measuring-System) Pedsc Ipc Ujpfx Adlopr → X/Y-Stage 200x200mm (Movement 25 x 25mm) → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module (only in combination with VMS3-Software)

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: 520511, Features: → robust machine housing made of cast iron → automatic loading and unloading of the test force → automatic change between lens and indenter body → LED illumination → digital measuring eyepiece → LCD color display touch screen → conversion to other hardness scales (e.g. HRC/HB) → easy operation Technical data: → test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000). → Vickers testing method → cross table 110 x 110 mm / travel 25 x 25mm → eyepiece 10X → automatic obejctive turret → objectives 10X / 40X / 60X → max. specimen height 90mm → max. specimen depth 110mm → conformity: DIN EN ISO 6507 / ASTM E-384 → weight approx. 50kg → power supply 230V / 50Hz Scope of delivery: → hardness tester → diamond indenter 136° → Cross table 110 x 110mm → Eyepiece 10X → revolving nosepiece → Objectives 10X / 40X / 60X → LED illumination → Power cord → Accessories case → Instruction manual OPTIONAL → VMS3 software (video measurement system) → Digital micrometer (for transferring the edge distance into the VMS software) → Module "automatic measuring" Psdoc Ipckspfx Adlepr (only in connection with VMS3 software) → PC system / monitor

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Podpfxolxyhfe Adljpr Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.