Used Bavelloni Egar 320-4T for sale (4,342)

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow Nledjz Ai Tpopfx Aazsg - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: excellent (used), Vertongen S-320 belt sander Sanding width: 320mm, 1 unit (rubber roller) Base 5.5KW motor Two feed speed settings, Nljdpfx Aszr D Tpeazjg Manual table adjustment, Oscillation, The sander is fully ready for operation.

Condition: used, functionality: fully functional, machine/vehicle number: 91599290, Year of construction: 2016, operating hours: 5,600 h, load capacity: 3,000 kg, fuel type: electric, drive type: Elektro, Low-level order picker Chassis number: 91599290 Condition: Ready for use and fully functional Technical condition: good Battery year of manufacture: 2022 Description: Jungheinrich ECE 320 – Electric low-level order picker with 3.6 m fork length, year of manufacture: 2016 | Operating hours: 5,600 h | Load capacity: 3,000 kg. Powerful and robust order picker for demanding warehouse and logistics tasks. With its 3.6 m long forks, the Jungheinrich ECE 320 offers ideal conditions for handling multiple pallets. The unit is fully functional, immediately ready for use and in good technical and optical condition. Technical data: Type: Low-level order picker Manufacturer: Jungheinrich Model: ECE 320 // Electric // 3.6 m forks Year: 2016 Operating hours: 5,600 h Load capacity: 3,000 kg Fork length: 3,600 mm Battery: included, year of manufacture 2022 Charger: available on request Condition: technically good, visually good, ready for use Location: available, immediately Notes: Sold in its current used condition. All prices are net plus 19% VAT. Sale only to commercial buyers with a valid VAT ID. No warranty or guarantee. Jungheinrich ECE 320 – Electric Low-Level Order Picker with 3.6 m Forks. Year: 2016 | Operating hours: 5,600 h | Capacity: 3,000 kg. Robust electric order picker with extra-long forks for multi-pallet logistics. The Jungheinrich ECE 320 is fully operational, in good technical and visual condition, and ready for immediate use. Specifications: Nedpfx Aaoxy Tnlezslg Manufacturer: Jungheinrich Model: ECE 320 // Electric // 3.6 m Forks Year: 2016 Operating hours: 5,600 h Capacity: 3,000 kg Fork length: 3,600 mm Battery: included (2022) Charger: available on request Condition: technically and visually good Location: available immediately Notes: Sale to business customers only (valid VAT ID required). All prices net plus VAT. Sold as used equipment without warranty or guarantee.

Condition: used, BAVELLONI GEMY 11 - Year 2005 Straight-line grinding machine, 11 grinding wheels Straight-line edging machine for 11 wheels Minimum workable dimensions: 35 x 35 mm Thickness: from 3 to 40 mm Power: 22 Kw Nljdpfx Aaezq Afzezsg Speed: from 0.5 to 5 m/min Total linear meters processed: 459,788

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 91140733, Year of construction: 2019, operating hours: 735 h, load capacity: 2,000 kg, lifting height: 5,350 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: electric, mast type: triplex, battery capacity: 620 Ah, battery voltage: 48 V, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 3,808 kg, Equipment: lighting, sideshift, Jungheinrich ETV 320 Reach truck, year of manufacture 2019 with a Triplex mast Details: Jungheinrich ETV 320 Year of manufacture: 2019 Work hours (h): 735 Mast type: Triplex Lift height (mm): 5350 Freelift (mm): 1700 Build height (mm): 2400 Nljdpfx Aozuywcoazjg Attachments: Sideshift Lift capacity (kg): 2000 Fork length (mm): 1200 Weight (kg): 3808 Additional hydraulic vehicle: AH1 Additional hydraulic mast: AH1 Front wheels: Polyurethane Rear wheels: Polyurethane Battery YOM: 2019 Battery capacity (Ah): 620 Battery voltage (V): 48 Accessories: Front spot light. Flashing beacon. Comments: Full freelift.

Condition: used, JONES & SHIPMAN 1307 EIT Precision Toolroom Universal Grinding Machine Model 1307 EIT Maximum grinding diameter 356 mm Grinding length between centres 1016 mm Maximum swing 356 mm Workhead speeds 6 speeds, 40 – 320 rpm Grinding wheel size 300 x 25 x 127 mm Grinding wheel speeds 1750 / 2300 rpm Wheelhead motor 3 kW Internal grinding spindle speed 16,000 rpm Floor space required 3207 x 1359 mm Weight 1930 kg Supplied with: Double Swivel Wheel Slide, Double Wheelhead, Internal Grinding Spindle, 3 Jaw Chuck, 4 Jaw Chuck, Magnetic Chuck, Faceplate, 2 Point Steady, 3 Point Steady. For sale with Jet Machinery Ltd Jet Machinery Stock No: 27015 Machine Serial Number: TBC Cost: £3,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Njdpfx Aaszi Eqqozelg Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: NO-017, Year of construction: 2004, operating hours: 0 h, overall weight: 3,700 kg, total height: 3,100 mm, total length: 3,330 mm, total width: 2,450 mm, CRYOLINE®CS Compact, self-stacking spiral freezer. Freezing medium: Liquid nitrogen 80 mm link height Overall length mm 3,330 Overall width mm 2,450 Overall height mm 3,100 Net belt width mm 320 Max. product height mm 60 Effective belt area m² 32 Number of belt tiers 17 Retention time min 9 – 90 Total weight kg 3,700 Nlodpfx Asz D Hn Dsazog Power demand* kW 24.2

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: 00450, operating hours: 900 h, power: 13 kW (17.68 HP), first registration: 01/1992, fuel: diesel, Equipment: all wheel drive, front power take-off, hydraulics, rear power take-off, trailer coupling, Tractor Iseki TU 320 FHUE, FIN: 00450, 13 kW, 1170 cc, 900 operating hours, with front and rear hydraulic lift and connections, front and rear PTO connection. First registration: 01.1992. Nodpfx Ajxw Nqwoazolg

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 High-precision drilling machine with extensive accessories! Made in Bienne/Biel, Switzerland Excellent condition! Coordinate drilling machine/fixture drilling machine with tool set (see photos) in very well-maintained, exceptional condition, second owner (41 years in current ownership). This quality will never be produced again! The coordinate drilling machine has the rare option of motorized table drive in the X and Y axes and potentiometers. This eliminates the tedious manual adjustment of individual coordinates over long distances using hand cranks. Furthermore, it has rare thermal stabilization and expansion compensation. For this purpose, 2 heaters are provided, which must be switched on separately before starting work and to maintain high accuracy and dimensional accuracy. This explains the factory-set high positioning accuracy of 0.002 mm with a resolution of 0.00. It is worth noting that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and facing at depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and highly unlikely to be available again. These machines are mainly used in the watch industry, gunsmithing/defense industry, precision engineering, material testing, and the optical industry, where the highest precision is required. It is also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are, of course, available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, Vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle mount MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Nodpfx Aszuvwljazjlg Distance table to spindle = 590 mm, spindle speeds continuously variable from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 steps from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm, Machine weight approx. 1500 kg. Payment for the machine, as is customary with used machines, is made in full before loading, no partial or installment payments! Special price due to business closure. Shipping (direct transport without transshipment) within the EU is possible. Price net export within the EU. Example: Secure shipping by direct transport (without transshipment!) to France/Spain/Italy, etc., up to 1700 km travel distance, approx. 1100 - 1450 EUR.

Condition: used, mileage: 340,865 km, power: 235 kW (319.51 HP), first registration: 06/2013, fuel type: diesel, tire size: 295/80 R22.5, axle configuration: 6x4, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, suspension: steel-air, total length: 9,540 mm, total width: 2,500 mm, total height: 3,400 mm, Year of construction: 2013, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - ADR - Reversing camera - Stability control - Sun visor - Alternating current = Further Information = Brakes: Disc brakes Front axle: Tire size: 295/80 R22.5; Steerable; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm; Suspension: Leaf spring suspension Rear axle 1: Dual tires; Tire tread depth left inner: 7 mm; Tire tread depth left outer: 8 mm; Tire tread depth right inner: 10 mm; Tire tread depth right outer: 7 mm; Suspension: Air suspension Rear axle 2: Tire size: 295/80 R22.5; Tire tread depth left: 7 mm; Tire tread depth right: 6 mm Unladen weight: 14,115 kg Nlsdpfxozxlz Uj Aazeg Payload: 11,885 kg GVWR: 26,000 kg Damage: None

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Nledpfxezqhgds Aazsg Technical specifications * Number of colours: 2 * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers * Additional trays, shafts, rods and tools * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,778 h, load capacity: 4,000 kg, lifting height: 3,320 mm, fuel type: diesel, gearing type: automatic, Equipment: adjustable boom, cabin, lighting, pallet forks, Year of manufacture 2006, originally only 2778 operating hours, diesel engine with automatic transmission, starts immediately. 24V battery system (2 x standard 12V batteries) Lifting height 3320mm. Full cabin, low overall height Fork adjustment, hydraulic, long forks Njdpfjz Dui Nex Aazslg Large wheels for off-road use.

Condition: new, Year of construction: 2026, machine/vehicle number: K00627, functionality: fully functional, operating hours: 2 h, power: 1.8 kW (2.45 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 240 mm, cutting width (max.): 450 mm, control type: manual, pivoting range: 45,060 °, actuation type: manual, total height: 1,300 mm, total length: 2,000 mm, total width: 850 mm, Equipment: CE marking, documentation/manual, The S 320 DG from Sägemaschinenfabrik Bauer GmbH is a powerful double-miter band saw designed for demanding applications in metal construction, mechanical engineering, steel construction, as well as in locksmith shops and manufacturing companies. Thanks to its robust industrial design, high cutting accuracy, and well-thought-out construction, it is ideally suited for economical and precise cutting operations in daily continuous use. Nledpfx Aaezqdmmozsg With a generous cutting capacity of Ø 320 mm for round stock or 450 x 230 mm at 90°, the S 320 DG offers high flexibility for a wide range of workpieces and material cross-sections. Miter cuts from 45° to the left to 60° to the right enable versatile applications in the cutting of profiles, pipes, and solid materials.

Condition: like new (used), Year of construction: 2001, Gildemeister NEF 320 K Cycle-Controlled Lathe Siemens Sinumerik 810 DL Control Year of Manufacture: 2001 Very Good Original Condition Nlsdpfx Aaowx Rbpjzjg Technical Specifications: Year of manufacture: 2001 Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Centre distance: 750 mm Cross travel: 185 mm Feed X: 4 m/min Feed Y: 4 m/min Rapid traverse X: 8 m/min Rapid traverse Y: 10 m/min Spindle nose DIN 55027 size 6 Spindle bore: 52 mm Drive power (100%): 7 kW Speed range: 14–3550 rpm (2 ranges) Tailstock quill diameter: 70 mm Tailstock quill stroke: 120 mm Tailstock taper: ISO MK 5 Dimensions: 2600 x 1440 x 1440 mm Machine weight approx.: 2.0 t Accessories and Equipment: About the Machine: Offered here is a Gildemeister NEF 320 K cycle-controlled lathe with cycle control, year 2001, in very good original condition. The machine is, of course, fully operational. The slides run very smoothly and evenly. Even at high speeds, the Gildemeister operates very quietly. This latest generation of lathes is very user-friendly and allows for surface finishes similar to grinding. The machine comes from a training workshop of a large industrial company. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Condition: ready for operation (used), Year of construction: 2021, - USED - 3-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE       X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 2000 mm Njdpfxezbnrio Aazjlg Z-AXIS TRAVEL: 1000 mm DISTANCE SPINDLE NOSE-TABLE: 350 - 1350 mm RAPID FEEDS X-Y-Z: 20 - 18 - 16 m/min SPINDLE: 6000 rpm; 30 kW; ISO 50 - DIN TABLE SIZE: 3000 x 1800 mm MAX ADMITTED LOAD: 10000 Kg HIGH PRESSURE COOLANT: 25 Bar TOOL MAGAZINE: CHAIN-TYPE ; 60 POS MAX TOOL DIAMETER: 125 mm MAX TOOL WEIGHT: 20 Kg CONTROL UNIT: HEIDENHAIN TNC 640 WEIGHT: 32706 Kg ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; MAGNETIC FILTER ; TOOL SETTER ; LINEAR SCALES ; TOUCH PROBE ; PORTABLE HANDWHEEL NOTE: MECHANICAL GEAR BOX

Condition: good (used), Horizontal-vertical rotary table with direct indexing, “MECA” design Table diameter: 320 mm Mounting: MK 3 Center height: 250 mm Table height, horizontal: 140 mm Weight, rotary table: approx. 70 kg Weight, tailstock: approx. 20 kg Accessories / Special features: • Horizontal and vertical • Indexing possible via scale drum and additionally via 24-step direct indexing 15° • Swivelable dividing worm for fast rotation Nlodpszyyx Rofx Aazog • Tailstock Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D – 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2007, *Description:* Industrial column drill press *CINCINNATI CA NC320V*, year 2007. Made in France. High-end machine for precision drilling in a mechanical workshop. Column-mounted spindle with mechanical speed variation in 2 ranges. Cross table + vise included. Complete machine, available for inspection. *Specifications:* - *Make / Model*: CINCINNATI CA NC 320V 380 - *Year*: 2007 - Serial number 320838 - *Speeds*: 2-range variable speed: 80-625 rpm and 385-3000 rpm - *Spindle*: CM3 or CM4 taper, to be confirmed - *Table*: Cross table + vise, as shown in the photo - *Column*: Column with rack and pinion for motorized up/down movement - *Equipment*: Emergency stop, speed chart Nodpfxjzvgn Rs Aazjlg *Condition*: Very good condition. Recent and robust machine. On a pallet for removal. Testing possible on site. Removal by carrier.

Year of construction: 2017, condition: excellent (used), Ferrari Sistemi IM 1050 Cheese Wrapper Manufacturer: Ferrari Sistemi Model: IM 1050 Machine Type: Automatic Cheese Wrapping / Packaging Machine Country of Manufacture: Italy Application: Cheese processing and packaging Technical Description The Ferrari Sistemi IM 1050 is an industrial automatic cheese wrapping machine designed for the packaging of cheese products within an automated or semi-automated cheese processing line. The machine is suitable for use in dairy and cheese-processing environments and is designed for continuous industrial operation. Its stainless-steel construction and food-processing design make it suitable for hygienic cheese production and packaging applications. Individual piece or complete cut & pack room available Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Nlodpfx Aez Dvl Ejazjg Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010

Condition: used, Year of construction: 2002, Equipment: documentation/manual, Technical data in the attachment. Robot including workpiece positioner and welding technology. Nedpfx Aasy Emz Sjzolg

Condition: used, mileage: 312,000 km, power: 235 kW (319.51 HP), first registration: 08/2007, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, color: blue, gearing type: mechanical, emission class: euro5, loading space length: 4,000 mm, loading space width: 2,470 mm, loading space height: 1,000 mm, Year of construction: 2007, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, RENAULT PREMIUM 320 DXI • EURO 5 • ATLAS CRANE WITH GRAB • HOOKLIFT TIPPER • TÜV •----VEHICLE HISTORY • GERMAN VEHICLE • NEW TÜV INSPECTION • APPROX. €7,000 IN RECENT REPAIRS FOR TÜV VEHICLE EQUIPMENT VEHICLE DATA • HOOKLIFT TIPPER WITH CRANE • ALLIANZ EDITION • RTL CONTAINER WITH DROP SIDES • MANUAL TRANSMISSION • MILEAGE: 315,000 KM ENGINE / DRIVE • ENGINE BRAKE • PTO (POWER TAKE-OFF) BRAKES / SAFETY • BRAKING SYSTEM • ENGINE BRAKE • HILL START ASSIST AXLES / CHASSIS • 3-AXLE VEHICLE • FRONT AXLE: LEAF SPRINGS • REAR AXLE: AIR SUSPENSION • 3RD AXLE LIFTABLE AND STEERABLE (STEERING AND LIFT AXLE) Nodpfx Aajyg Txrezjlg • GROSS VEHICLE WEIGHT: 26,000 KG • UNLADEN WEIGHT: 9,630 KG • PAYLOAD: 16,370 KG TYRES • AXLES 1-3: 315/80 R22.5 • ALL TYRES IN VERY GOOD CONDITION CLIMATE / HEATING • AIR CONDITIONING • PARKING HEATER • RETROFITTED STANDALONE AIR CONDITIONING UNIT COMFORT / COMMUNICATION • HANDS-FREE KIT DIFFERENTIAL LOCK • DIFFERENTIAL LOCK CRANE • TEREX ATLAS CRANE • TYPE 115.2 - A12 • YEAR OF MANUFACTURE: 2007 • GRAB ATTACHMENT TANK • 1 X FUEL TANK TRAILER OPERATION / PREPARATION • COMPLETE TRAILER PREPARATION PRESENT • AIR CONNECTIONS • ABS CONNECTION • ELECTRICAL CONNECTION • NO TRAILER COUPLING FITTED ----EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000)----EXPORT PROCEDURE & CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAY, 30 DAY LICENSE PLATES AND 17-21 DAY AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Changes, errors, and prior sale reserved! For more vehicles, visit our homepage: Sale exclusively in accordance with our General Terms and Conditions – see homepage Important note: Despite careful verification of all the details in our offer, errors may occur. Some may arise from transmission errors in the systems of various platform providers. Therefore, we note that all information is provided without guarantee and does not constitute any legal claim. Legal notice: This sales advertisement does not represent an offer within the meaning of §145 BGB. Instead, it provides information for initiating a contract. The information given here is without guarantee and does not constitute warranted characteristics.

Condition: used, Year of construction: 1975, Product information "Kasto EBS 320 U bandsaw" Kasto EBS 320 U bandsaw Condition: Used Year of manufacture: 1975 Technical data: Cutting diameter: 320 mm Cutting range: 90° square: 320 x 320 mm Nedpfx Ajzily Ssazslg 45° square: 180 x 180 mm 45° round: 180 mm Vice opening width: 320 mm Cutting speeds: 37 - 102, 4 stages Saw blade length: 575 x 50 x 2.5 mm Motor power: 4.5 kW Dimensions (W x D x H), approx.: 1670 x 750 x 1500 (bow above) Weight, approx.: 700 kg Equipment: - Coolant system with pump - 2 saw blades - Machine feet Inquiry item: Transportation costs will be provided in a separate offer.

Condition: used, power: 43 kW (58.46 HP), color: other, Year of construction: 2001, Empty weight: 12.000 kg Dimensions (LxBxH): 800 x 255 x 320 cm Quick coupler system: Yes Serial number: 567/9252 Nodpfxjz Etpwe Aazolg Hour meter reading: 2676H Engine: Liebherr Engine power: 58 kW Operating weight: 12,000 kg Tire size: 9.00-20 Additional hydraulic lines Tilting bucket Bucket width: 1,800 mm Quick-change system Swing arm Dozer blade Key included Remarks: Signs of wear; drive direction switch needs to be checked Overall dimensions: 8,000 x 2,550 x 3,200 mm Online auction of drilling, foundation and heavy construction equipment, including a 2014 COMACCHIO MC28 HT multifunctional ground drilling rig, 1992 KLEM KR806D horizontal drilling machine, 1977 AMERICAN HOIST 9299 dragline, NOBAS UB35S and NOBAS UBI254 draglines, and a 2001 LIEBHERR A310B wheeled excavator. The machines originate from a foundation and marine construction environment and are suitable for contractors, drilling and piling companies, crane and dragline specialists, exporters, resellers and buyers of heavy construction machinery. The online auction opens Thursday 17 September and closes Tuesday 6 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 2 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 2014, The Agfa Anapurna H2500i LED is a high-speed, heavy-duty, wide-format hybrid UV LED-curable inkjet printer designed to handle both rigid boards and roll-to-roll flexible substrates Colour Confirguration: 6 colours + W In Production, demo possible RIP: non available Western Europe For further technical details refer to enclosed datda sheet. Maximum Print Width: 250 cm (8.2 ft) | Up to 247 cm (8.1 ft) for full borderless printing Nledpfsz Dw Axox Aazsg Rigid Media Length: Max 140 cm (4.59 ft) with one standard roller table. This extends up to 320 cm (10.5 ft) when using the default front and rear media extension tables Productivity & ThroughputDraft Mode: Up to 115 m²/h (1,238 ft²/h)Express Mode: 70 – 78 m²/hProduction Mode: 35 – 57 m²/hStandard Quality Mode: 21 – 31 m²/hHigh-Quality Mode: 16 – 17 m²/h

Condition: excellent (used), Year of construction: 2018, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: KC1811242, turning diameter over cross slide: 325 mm, turning length: 1,285 mm, turning diameter: 570 mm, spindle bore: 80 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 40 rpm, travel distance X-axis: 310 mm, travel distance Z-axis: 1,285 mm, spindle motor power: 7,500 W, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (min.): 1,600 rpm, rotational speed (max.): 40 rpm, total height: 1,700 mm, total length: 3,070 mm, total width: 1,300 mm, quill travel distance: 150 mm, quill diameter: 75 mm, quill stroke: 150 mm, swing diameter over cross slide: 325 mm, turning diameter over bed slide: 570 mm, turning diameter over top slide: 325 mm, type of input current: three-phase, overall weight: 2,560 kg, swing diameter over bed slide: 570 mm, bar passage: 75 mm, chuck outer diameter: 300 mm, swing diameter over top slide: 325 mm, center height: 280 mm, bar diameter (max.): 75 mm, mount diameter: 32 mm, Equipment: documentation/manual, 2018 Dugard Lunan 570MF CNC Lathe – Excellent Condition 📍 Location: Ireland 🔧 Machine Type: CNC Lathe 🛠️ Manufacturer: Dugard 📅 Year of Manufacture: 2018 ⏱️ Machine Hours: Only 2,300 ✅ Condition: Very Good / Fully Functional 💡 Why Choose This Machine? The Dugard Lunan 570MF is a solid, well-built CNC lathe designed for medium to heavy-duty turning applications. With Siemens 828D control, only 2300 working hours, and a complete set of chucks, steadies, and accessories, this machine is ideal for general precision engineering, subcontractors, and educational/training use. It’s well maintained, ready to work, and represents excellent value. Buy a 2018 Dugard Lunan 570MF CNC Lathe in excellent condition. Featuring 570mm swing, Ø80mm spindle bore, 400mm chuck, and 7.5kW power. Available now from Used Machine Tools Ireland. International delivery available. 🧰 Machine Includes: Siemens 828D CNC Control System 320 mm 3-Jaw Chuck Nodpewv Sx Refx Aazelg 400 mm 4-Jaw Chuck Travelling Steady Fixed Steady Coolant Equipment Tailstock Operator Manuals Selection of Tool Holders & Chuck Jaws 🔹 Technical Specifications Max Swing Diameter Over Bed: Ø570 mm Max Swing Diameter Over Slide: 325 mm Distance Between Centres: 1500 mm Span of X/Z Axis Guide Rails: 420 mm Max Turning Length: 1285 mm Center Height: • To Bed: 280 mm • To Ground: 1170 mm Spindle Bore Diameter: Ø80 mm Bar Capacity: Ø75 mm Spindle End Type: D8 Chuck Size: Ø300 mm or Ø400 mm Spindle Speeds: 3-Speed Manual Ranges: • 40–150 rpm • 130–470 rpm • 450–1600 rpm Taper of Spindle: Metric 90, 1:20 Turret: 4-Position Electric Turret Tool Size: 32 × 32 mm Tailstock: • Quill Diameter: Ø75 mm • Stroke: 150 mm • Taper: MT5 End Bracket: Hand-operated type Screw Model: • X-Axis: FFZD2504-3-P3 • Z-Axis: FFZD4008-5-P3 Rapid Traverse (X/Z): 6 / 10 m/min X-Axis Stroke: 310 mm Minimum Set Unit: 0.001 mm Main Motor Power: 7.5 kW Power of Main Supply: 12.5 kW Net Weight: 2560 kg Dimensions (L×W×H): 3070×1300×1700 mm 💡 Features & Benefits: Robust and versatile CNC lathe ideal for medium to heavy-duty turning High-torque spindle and large bore suitable for tough materials Reliable FANUC control system with user-friendly interface Well maintained and fully serviced – ready to run Ideal for sub-contract machine shops, tool rooms, and general precision engineering 🚚 Delivery Options Available We offer nationwide & International delivery Dugard Lunan 570MF CNC Lathe for sale Used Dugard CNC lathe Ireland 2018 Dugard Lunan CNC lathe CNC lathe Ø570mm swing Large bore CNC lathe used Heavy-duty CNC turning lathe CNC lathe with 80mm spindle bore 4-position turret CNC lathe CNC lathe with tailstock and 12.5kW power supply CNC lathe for shaft turning manual turret CNC lathe industrial CNC lathe for metal turning Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, mileage: 116,500 km, power: 235 kW (319.51 HP), first registration: 03/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, loading space length: 3,900 mm, Equipment: ABS, air conditioning, crane, soot filter, Int. No.: 207 Very well-maintained Iveco EuroCargo with CRANE and three-way tipper * Iveco * EUROCARGO 180-320 * 4x2 * Leaf spring suspension * Manual transmission * Permissible weight 18,000 kg * MEILLER 3-way tipper * CRANE Palfinger PK 12501 SLD * REMOTE CONTROL * Hook height approx. 14 m * Lateral reach, see load chart * 5/6 control circuits * Grapple available at extra cost * Differential lock * Central locking * 3-seater * Radio * AIR CONDITIONING * EURO 6 * Tow hitch 18 tons * Hydraulic tow hitch * Rear tires approx. 80-90%, front tires approx. 50% * Environmental badge (green) * Very good condition * VAT can be shown!!! Trade-in possible Financing from 5.99% Nlsdpsz Edq Eefx Aazeg Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed features. The seller assumes no liability for typing and data transmission errors. The listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!