Used vertical turret lathes - double column - faceplate diameter 2000-2999mm for sale (12)

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm Dcjlhcjuddcgsdw Djp processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: used, Vertical cnc lathe BERTHIEZ TFM 250 R Dcolhcdewbkd Now Dop

Condition: new, Year of construction: 2025, Machine NEW! Dcelhcdwscht Tnj Dsp Geometry acceptance according to DIN8609 Warranty 12 months for all damages Control:conventional/SPS Siemens faceplate control 4-axis digital display Fa.Fagor/ACU-RITE or Heidenhain complete electrical equipment 230/400V,50Hz,german make,CE-Norm Technical data: Max. Workpiece dimensions: - Diameter mm 3200 - Height mm 1600(up to 2600 possible*) Max. Workpiece weight kg 16000 Face plate diameter mm 2800 Max. stroke length - horizontal mm 1720 - vertical mm 1200 Number of stages of faceplate rotation 18 Face plate speeds PLC Siemens or stepless(2 steps) Lenze control rpm 1,6-63/0-80 Support working feed number of steps 18 Speed of cross beam adjustment mm/min. 360 Max. Support line adjustment speed mm/min. 2000 Max. Faceplate torque kN/m 67 Main drive power kW 55/75 Dimensions (LxWxH) mm 5490x7075x5100 Weight kg 43.000

Condition: new, Year of construction: 2025, rotary table diameter: 2,500 mm, Control: Siemens One Table diameter: Ø2500 mm Max. swing diameter: Ø3000 mm Max. turning diameter: Ø2800 mm Max. turning height: 1600 mm (option: 2000 mm, 2200 mm) Max. workpiece height: 1800 mm Max. workpiece weight: 15,000 kg Automatic tool changer: number of positions 16 (24, 32, 48, 60) Table drive: 85/128 kW, optional master-slave drive Driven tools: 11/15 kW Djlhcdecxyn Tew Decp Space requirement (LxWxH): 6835x5080x6400 mm Machine weight: 56,000 kg 24 months warranty (free annual inspection during the warranty period), geometric accuracy guarantee as at commissioning – 5 years, 5-year cross roller bearing warranty Detailed quotation on request.

Condition: ready for operation (used), Year of construction: 1978, CNC vertical lathe Manufacturer: BERTHIEZ Model: TFM 200 Year: 1978/1995 CNC: NUM 1062T / SOMAB PL+S3 (Teach-in, ISO and Conversational modes) Specifications: Table diameter: 2,000 mm Maximum swing: 2,300 mm Usable height: 2,000 mm Table load capacity: 20 t Table rotation speeds: 1.6 – 200 rpm Table motor power: 55 kW Ram section: 200 x 200 mm Standard table height from floor: 731 mm Vertical traverse stroke: 1,300 mm Traverse movement speed: 400 mm/min Vertical ram travel: 1,600 mm Right carriage travel (from table axis): 1,280 mm Left carriage travel (from table axis): 400 mm Continuous feed rate range: 0.05 – 24 mm/rev CNC programmable feed rate: 0.2 – 360 mm/min Rapid traverse: 6,000 mm/min Equipped with: 12-position tool changer Chip conveyor Dolhjw Adpbecdw Docp

Condition: new, Year of construction: 2025, turning height: 2,400 mm, rotary table diameter: 2,500 mm, table load: 30,000 kg, table diameter: 2,500 mm, warranty duration: 12 months, table speed: 112 mm/min, REM Vertical Turning Lathe TURNING DIAMETER SCR SCR 27 MANUAL Dcjlhcdwjv Hngto Djp Special manufactured by REM for : CENTER AND EAST EUROPE MIDDLE EAST LATIN AMERICA DEVELOPING SHOPS, HIGHLIGHTS - UNBEATABLE PRICE - VERY EFFECTIVE MACHINE - GOOD FOR WORSHOPS IN SMALL AND MIDDLE RANGE OF PRODUCTION - NO GEARBOXES - NO CNC CONTROLL - NO EXPENSIVE TEHNOLOGIST AND WORKER - EASY MAINTENANCE AND - EASY OPERATION - EASY LEARNING Technical Details: Faceplate Diameter (mm) 2500mm Max. Turning Diameter (mm) 2500+ up to300mm Machining Height: 2400mm Max. Work Piece Weight: 30 tons Control Conventional DIGITAL READOUT for each axis Plase note: This machine tool is made to order and can be customized to your specific needs.

Condition: used, Year of construction: 1961, turning diameter Max. 4200 mm Dslhcdweuddnvj Djcp faceplate diameter 3700 mm turning height Max. 2600 mm workpiece weight Max. 35 t Power 80 PS turning speeds 125-500-1500 U/min DIGITAL CONTROL DISPLAY Largest diameter with the crossbeam supports: 4200mm Largest turning diameter with side support: 3900mm Largest turning height above faceplate: 2500 Side support 1 vertical grinding ram: 1200mm stroke (out of operation) 1 turning ram: 1400mm stroke

Year of construction: 1989, condition: good (used), functionality: fully functional, TECHNICAL DETAILS Swing diameter: up to 2800 mm face plate diameter: 2500 mm height under crossbeam: max. 2200 mm workpiece weight: max. 15.000 kg Dslhcdwemxkzaj Decp Support: 2 x vertical, 1 horizontal MACHINE DETAILS main drive: approx. 55 kW Total weight: approx. 56 t

Condition: new, Year of construction: 2025, NEW MACHINE TECHNICAL DATA: Working diameter 2500mm Max. workpiece height 1600mm Max. workpiece weight 16000kg Face plate diameter 2240mm Face plate rotation speed 0-100U/min Max. torque on face plate 50000Nm Performance of main drive 75kW SETTINGS: -1/2 supports -Capto quick change system / 3-ffold steelholder -Telescopic cover -Zentral lubrication SKF/VOGEL -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -machine housing -chip conveyor -cooling water preparation -Turret Doljcxlylohcdw Decp -driven tools -... CONTROL: FAGOR/SIEMENS OTHER: Geometrie-Abnahme nach DIN8609

Condition: ready for operation (used), Year of construction: 1983, SEDIN VTL 1525 Table diameter : 2250 mm - Maximum swing : 2500 mm - Working height : 1600 mm - Table speeds : 1,6 - 80 rpm - Main motor power : 45 kW - Weight of part on table (maximum) : 16 To Dslorblfxohcdw Dscp - Weight of the machine : 35,5 T -Movie available

Condition: new, Year of construction: 2025, turning height: 2,800 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,300 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, faceplate diameter: 3,000 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, rotary table diameter: 3,000 mm, rapid traverse X-axis: 6 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, rotational speed (max.): 92 rpm, rotational speed (min.): 1 rpm, table load: 30,000 kg, table diameter: 3,000 mm, REM Vertical Turning Lathe TURNING DIAMETER SCR 33 MANUAL with DRO Special manufactured by REM for : Dcjlhcev Ilg Hjdw Dop CENTER AND EAST EUROPE MIDDLE EAST LATIN AMERICA DEVELOPING SHOPS , HIGHLIGHTS - UNBEATABLE PRICE - VERY EFFECTIVE MACHINE - GOOD FOR WORSHOPS IN SMALL AND MIDDLE RANGE OF PRODUCTION - NO GEARBOXES - NO CNC CONTROLL - NO EXPANSIVE TEHNOLOGIST AND WORKER - EASY MAINTENANCE AND - EASY OPERATE - EASY LEARN Technical Details: Faceplate Diameter (mm) 3000 Max. Turning Diameter (mm) + 300 Machining Height: 2800 mm Max. Work Piece Weight: 30 tons Conventional Control DIGITAL READ OUT for each axis

Condition: used, Year of construction: 1990, turning diameter 2400 mm faceplate diameter 2200 mm turning height 2100 mm control SIEMENS Sinumerik 850T workpiece weight 17 t Tol measurements 32 Werkzeuge Dcelhcovxw Svjdw Djp required space 11 x 6 x 6,3 m Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN