Used Beco Brevis 100 for sale (23,877)

Condition: good (used), Steady rest universal swing Ø 100 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Nljdpfx Ajzdirdegyec

Condition: excellent (used), Here we offer you a chamber dryer. External dimensions approx.: Width: 1,885 mm Depth: 1,200 mm Height: 2,425 mm Internal dimensions approx.: Width: 1,030 mm Depth: 1,000 mm Height: 2,100 mm Nlodpfx Agezdzixeyoc Internal volume: 2.2 m³ Rated temperature: 100 °C Operating temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating power: 20 kW Air circulation rate: 4,500 m³/h / 400 Pa Motor power: 1.1 kW Protection class: IP 54 The chamber heating oven must not be used for flammable or explosive materials. The chamber heating oven must not be installed in an explosion-proof area. Continuous chain conveying system External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm Carrier bars: 13 pieces Pitch: 228 mm Carrier bar width: 354 mm Carrier bar depth: 320 mm Usable height: 135 mm Drive motor power: 0.25 kW at 189 Nm Transport speed: average 5 m/min. Load capacity/carrier bar: max. 10 kg Total load capacity: max. 130 kg Total weight when loaded: max. 730 kg Year of manufacture: 2005 Type: Ke/SO Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), IPG Ytterbium Fiber Laser with Controller Here we offer an IPG Ytterbium Fiber Laser with controller. IPG Ytterbium Fiber Laser Type: YLP-C-1-100-20-20 Condition: used Nodpfszdyyvox Agyjlc Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Control unit, heating controller, osmosis control - control box, heating controller, heating control device Nedpfjx Hxcdsx Agyelc -Manufacturer: Sauter, equitherm 100 heating controller with accessories, unused, original packaging -Type: EQJW 41 D 10 -Temperature sensor: EGT 30 B 10 / EGT 31 B 10 -Number: 2x heating controllers available -Price: per piece -Transport dimensions: 210/210/H165 mm -Weight: 2 kg/piece

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Type: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: Water-cooled Description Used temperature shock test chamber from CTS. Suitable for shock and cycle temperature tests. Application in industry, research, and quality assurance. Application Areas Material testing Aging tests Electronics and component tests Temperature shock tests Automotive and quality control Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Nsdey H Hk Ajpfx Agyjlc Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Touchscreen control Microprocessor control Program operation Setpoint/actual value display (digital) 2-zone system Mobile frame for quick changeover Viewing window Integrated control cabinet Cooling water connections Technical Design Separate hot and cold chambers Stainless steel test chamber Industrial design Dimensions Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation Declaration of Conformity Test certificates Operating manual Wiring diagram and piping diagram Spare parts list Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Scope of Delivery Test chamber TSS-70/350-A Documentation (if available) Inspection possible by arrangement. Loading and transport can be arranged on request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2021, Manufacturer : SINEX Model : TS 100 / 24 U Year : 2021 Type: Vibrating conveyor Immequip frame (VIB 315 – 1600) Materials: 304 L stainless steel Power : 1,75 kW Passage width: 315 mm Conveyor length: 1550 mm (1075 mm to the exit) Nledezfwvkspfx Agyec Product output size: 200 x 290 mm Dimension : 175 x 60 x 127 cm Drawings and technical documentation available This equipment was modified by the previous user (length + product outlet)

Condition: used, Year of construction: 2004, Manufacturer: Gerteis Model: GMP-Polygran Macro Pactor 250/100/3 Year: 2004 Type: roller compactor, granulation unit for the pharmaceutical industry. Feeding screw Tamping screw Nlodpfjx R Ar Rjx Agyjc Compaction zone with pressure rollers Granulation area with star rotor and screen Force: 1 – 20 KN/cm Gap width: 1.0 – 6.0 mm Pressure roller speed: 1 – 30 rpm Roller diameter: 250 mm Roller width: 100 mm Capacity: 60 – 400 Kg/H (normal value: 200 Kg/h) Equipment dismantled and stored. Full electrical and technical file + program backup available. Electrical and safety control cabinet not available. These elements can be quoted separately.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 332 mm, travel distance Z-axis: 625 mm, number of axes: 4, This 4-axis EMAG VTC 100 vertical turning machine was manufactured in 2014. It features dual-turret machining with 2 tool stations, live tooling, and an enclosed working area. The machine is designed for high-volume production and is suitable for shaft machining. If you are looking to get high-quality turning capabilities, consider the EMAG VTC 100 machine we have for sale. Contact us for further details. • 4x units • CNC Control: Siemens SINUMERIK • Turrets: 2 • Live Tooling: Yes • Enclosed Working Area • Hydraulic Chuck • Automatic Workpiece Handling • Dual-Turret Machining • Suitable for Shaft Machining • Suitable for High-Volume ProductionThe technical specifications may vary slightly as these are custom made machines Njdpfx Aozhbiajgyolc Technical Specification Driven Tools Yes

Condition: used, cfm A17/100 compressed air vacuum cleaner / liquid vacuum cleaner Ex protected! See photo for further details and scope of delivery. For technical data, see type plate. Item condition: used, untested condition: used, untested Without OVP Without original packaging Example photos sample pictures A viewing in Wettringen is possible! For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! With your purchase you confirm that you are working commercially or as a freelancer. Nsdotzxrxjpfx Agyjlc Otherwise you violate our terms and conditions!

Condition: used, Year of construction: 1993, operating hours: 95,192 h, Mannesmann Demag RA-100 compressor further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested condition: used, untested Without OVP Without original packaging Example photos sample pictures A viewing in Wettringen is possible! For further questions you can contact us by email. Nsdpfjtzxpwox Agyslc The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: new, SCHUNK DPG 100 parallel gripper, serial number: 370253 + accompanying documents DPG 100/1 and DPG 100/1 S, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Nlodpfjzd I Eyex Agyoc

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 100 x 100 x 5400 mm Total length:3100mm Total hight:75mm Nodozc Iypjpfx Agyelc V-size: 10 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1967, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Colour: Grey Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nedpfxsx N Sxdo Agyjlc Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Used machine Equipment and technical specifications: Njdpfx Aswhuk Togyslc Lock case milling unit Lever hole drill Mortise milling cutter Including accessories Motor 1.7 kW 2800 rpm Location: Mainz Availability: Short term

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: Nlodpfx Agjwka S Ioyjc - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Nledoy Eizujpfx Agyoc Planing width: 630 mm Planing height: 3 - 300 mm Maximum cutting depth: 8 mm Table length: 1100 mm Cutterhead speed: 5000 rpm Feed motor power: 0.55 / 0.75 kW / 0.8 / 1.0 HP Extraction port Ø 160 mm, usable on left and right Feed speed: 7 + 14 m/min Main motor power: 7.5 kW / 10 HP Voltage: 400 V / 50 Hz Space requirement approx. 1070 x 1200 x 1060 mm Net weight approx. 1050 kg TECHNICAL DESCRIPTION Robust German engineering. For thickness planing with a planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions. PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives. Pendulum-mounted feed rollers. Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and secure workpiece feed. With segmented pressure bar. Electric height adjustment of the thicknessing table, tilt-resistant on 4 trapezoidal thread spindles. With finely planed thickness table. Positioning control 4.3" touchscreen. Automatic star-delta start. Mechanical motor brake. Extraction port 160 mm, usable on left and right. Machine calibrated at the factory. CE compliant GS tested Standard equipment as follows: Solid steel cutterhead with 4 Tersa reversible knives Standard quality for 630 mm planing width Rubber infeed roller Rubber outfeed roller Thickness table without table glide rollers Positioning control 4.3" touchscreen 2 feed speeds 7 + 14 m/min Touch panel 4.3" Location: Flörsheim Availability: Immediately

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103-3 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Njdpsyt H Awofx Agyjlc Model Amada HFE 100-3 downstroke CNC Press brake Year 2001 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 6800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Measuring gauge Manufacturer: Micro-Maag Model: B2 40-100 Stock number: (28690) Measuring range: 40 - 100 mm in 2 mm steps per test gauge 1 test gauge DM 74-76 mm is missing Very precise measurements possible, as measurement is taken at 6 points. Measuring depth approx. 800 mm Transport case dimensions: Width: 505 mm Depth: 340 mm Height: 260 mm Nledpfx Aey Ipbmogyec Weight: 29 kg

Condition: used, Digital overpressure measuring device Digibar Nodscf Rb Tspfx Agyelc suitable for measuring static and quasi-static liquid and gas pressures. PE 100 is the battery-powered version.

Year of construction: 2018, condition: like new (used), Temperature sensor Measuring transducer Manufacturer: Jumo Unused Type: PT 100 Nlsdpfsfgwmbox Agyoc Number: 902102/10 00055514 0128409001008450005 Immersion tube, stainless steel Weight: 1 kg Total length: 570 mm Immersion length: 470 mm With bracket CH 512032 Estimated age

Condition: excellent (used), Scanning head (28260) Manufacturer: Heidenhain Type: LIDA 20/100 Njdpfjh D Ry Njx Agyjlc

Condition: used, Year of construction: 1979, total height: 1,700 mm, total length: 4,900 mm, total width: 1,900 mm, Empty weight: 8.000 kg Metal turning lathe Model: Conventional Nlsdpfxewnhf Re Agyec Manufacturer: TOS Type: SU-100 Centerdistance: 2000mm Turningdiameter above bed: 1050mm Spindle-hole: 105mm Motorpower: 22kW Spindle-speed: 2,24-450rpm Max. workpiece weight: 5000kg Including 4-jaw-chuck + lynette Machine-dimensions: 4900x1900x1700mm Machine-weight: 8000kg Machine has been tested, in very good condition Video is available - Year: 1979 - Documentation available: No - CE certificate present: No - Serial number: 0429412 - Drive system: Conventional - Power [kW]: 22.0 - Swing over bed [mm]: 1050 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Options: Four-jaw chuck, Fixed steady - Transport dimensions: 4900mm x 1900mm x 1700mm (l x w x h) - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2010, condition: excellent (used), Tension testing device manufacturer: Prema max. pressure: 100 MPa clamping diameter: 220 mm weight: 12 kg Nlodpfx Agefd Encjysc

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 3,110 mm, travel distance Y-axis: 1,620 mm, travel distance Z-axis: 180 mm, number of axes: 5, spindle speed (max.): 24,000 rpm, This 5-axis SCM Morbidelli M100 CNC processing center was manufactured in 2019. It features a useful working field of 3110 mm in the X-axis and 1620 mm in the Y-axis, designed for high productivity in furniture and panel processing. The machine includes advanced capabilities such as 5-axis routing, drilling, and integrated CAD-CAM software. If you are looking to get high-quality panel processing capabilities, consider the SCM Morbidelli M100 machine we have for sale. Contact us for further details. Njdpezgcc Eofx Agyjlc • Year/usage: Purchased 2019; approx. 2,000 operating hours • Axes/capabilities: 3/4/5-axis machining; drilling (vertical and horizontal on 4 sides), routing/milling, grooving, edge machining; PRO-SPACE safety system • Working area: X 3110 mm; Y 1620 mm; Z passage 180 mm; Y passage 1900 mm; pendulum length 1400 mm • Worktable: TV FLEX 1600 worktable, 6 mobile bars/supports, 6 crossbars; standard bar positions 6–12; mobile bar length 1600 mm; 12 fixed vacuum cups (145 x 145 x 75 mm); prep for 6 pneumatic clamps; 4 pneumatic panel loading/support devices; 8 rear limiters; 8 intermediate limiters; left lateral reference + laser for shaped parts • Structure/motion: Welded steel frame; linear guides with recirculating bearings; X by mobile bars, Y by gantry with rack & pinion both sides, Z by ball screw; CNC-managed positioning • Speeds: Max XY vector speed (PRO-SPACE) 56 m/min; drilling spindles up to 8,000 rpm; electrospindle up to 24,000 rpm • Drilling unit: F23L group with 13 vertical spindles (7R+6L), 10 horizontal spindles (4+3 in X, 2 in Y); integrated X-direction saw Ø125 mm, 2.2 kW; 75 mm pneumatic on/off stroke; inverter for programmable speed • Main spindle: Hiteco JQX 5-axis electrospindle, HSK F63, liquid cooled, ceramic bearings; power class ~10 kW (S6 up to ~15 kW), 24,000 rpm • Tool changers: Rear TRB 14 (14 positions; 350 mm stroke; 115 mm pitch; tools up to Ø240 mm; total 70 kg); Front FAST 14 (14 positions; tools up to Ø130 mm in selected pockets; max 8 kg/tool; total 24 kg) • Control/software: Windows 7; 21.5" FHD display; keyboard/mouse + machine panel; Maestro CNC CAD/CAM (parametric/graphic programming, DXF import, ISO graphics, simulation); TECPAD 7" mobile touch pendant; remote control along machine • Vacuum: Standard vacuum pump (machine standard); centralized automatic lubrication • Utilities: Installed power 23 + 28.5 kVA; compressed air 450 NL/min; dust extraction requirement 4500 m³/h, 25 m/s, outlet Ø250 mm; centralized/optimized extraction with adjustable conveyor and grouped outlets • Safety/standards: PRO-SPACE concept (no front photocells/side fences per offer), CE conformity, emergency stops and guarded areas as per EU norms Additional equipment • Additional vacuum pump: 1 x 90 m³/h • Additional hardware key for Xilog/Maestro (USB)

Condition: used, Year of construction: 1994, CNC press brake Manufacturer: Blemas Type: 100-33 Nedpfjyvfkljx Agyjlc Year of manufacture: 1994 CNC control: Cybelec DNC 74 PSG Press force: 100 tons Working width: 3 m Weight approx.: 8 tons Dimensions approx.: 3,600 x 1,600 x 2,600 mm 24626