Used Bosch Gco-1424-J for sale (6,071)

Condition: used, mileage: 486,000 km, power: 310 kW (421.48 HP), first registration: 04/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, electronic stability program (ESP), parking heater, Special equipment: Axle load measuring device, front axle load 8.0 t, trailer hitch: Rockinger towing hitch, battery 220 Ah, air horn, driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: lane keeping assist, suspension: front springs 8.0 t, 3-leaf, 12-speed gearbox - type: G 330-12, rear axle crown wheel 300, info display 10.4 cm with additional indicator, interior filter for construction vehicles, communication interface, fuel tank: 290 l aluminum, left, air intake behind cab, mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, reinforced engine brake, PTO MB 131-2c, frame lowering without airbag residual pressure control, retarder, acoustic reversing warning (external warning signal), fleet management system interface, sunblind for side window, driver’s door, voltage converter 24V / 12V 10A, additional 24V socket in front passenger footwell, automatic daytime running lights, preparation / switch for lift axle on semi-trailer / trailer, preparation for coolbox / refrigerator, additional water heater, gearbox oil cooler Hodol Iw H Ispfx Al Aeu Further equipment: Emission standard EURO 6, ABS deactivatable, axle configuration: 4x2, trailer socket 24V / 15-pin, work lights, Arocs, audio system: radio with USB port, exhaust tailpipe to vehicle center, exterior mirrors electrically adjustable and heated, rear axle differential lock, air connection in cab, steel air tank, medium air unit, cab: width 2.30 m, cab: movable cab entry, cab: hydraulic tilt device, cab: L StreamSpace, cab floor with engine tunnel 170 mm, suspension: leaf / air, front springs 7.5 t, 3-leaf, electric window lift, generator 100A, 12-speed gearbox - type: G 281-12, AdBlue tank: 60 l, interior filter: pollen filter, body/superstructure: tractor unit, body variant: standard, lower comfort bed, central locking comfort system, 3-piece mudguard, unregulated power steering pump, front air intake, 2-stage air compressor, heated air dryer, engine 12.8 l – 310 kW R6 diesel (OM 471), engine compartment encapsulation, wheelbase 3600 mm, ramp mirror, residual heat utilization, partially protected disc brakes, disc brakes on front and rear axles, seat cover/upholstery: fabric, cab seats: co-driver’s functional seat, cab seats: driver’s standard air-suspended seat, front axle stabilizer, cab socket 24V, tachograph / EC control unit, CB radio preparation, toll system preparation, straight front axle, permissible gross weight 18.00 t * VIN: WDB96440310134022 * Accident vehicle * Price upon request * All information without guarantee Tel./WhatsApp:

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Process Description The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. Hsdpfxeg Icfpo Al Asu At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of Manufacture: 2016 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid Hjdoxl Dbtepfx Al Aju • Original transport case with protective foam Applications: • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: excellent (used), Year of construction: 2014, We are offering for sale these two Bosch UL-S 14000 steam boilers, which are in very good condition. They were manufactured in 2014. Hjdpfszg Nt Dsx Al Aeu Manufacturer: Bosch Type: UL-S 14000 Year of manufacture: 2014 If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke via Festo valves and cylinders. In addition, various monitoring systems are installed for complete automation. Hjdpfxehxvu Ee Al Aju Technical data: Torque of electric screwdriver: 0.6 Nm Torque of gearbox: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - a Bosch Rexroth LT303 power module is required to operate the screwdriver. (Power module not included) Screwdriver 1 and 2 each consist of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Straight gear Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight gear Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A motor connection cable of 7m is included. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Ram surface: Ø 45 mm Maximum installation height: 235 mm Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm Hjdpfx Alsh U Dtue Aeu - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: used, Hydraulic power unit with BOSCH - REXROTH hydraulic pump Hydraulic unit Type: U 120 V4 0.18 No.: 983791 Year of manufacture: approx. 1975 Operating pressure: max. 40 bar Flow rate: 4 liters/min. Motor power: 0.18 kW Tank capacity: approx. 8 liters Power supply: 400 Volts, 50 Hz Hjdpfoxrgu Asx Al Asu - Gear pump - Pressure regulator - Return filter Required installation space L x W x H: 350 x 300 x 420 mm Net weight: 20 kg Good condition

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, A BOSCH steam boiler and a BOSCH heating boiler are offered for sale, both in very good condition. Hjdpfx Alozd T Ndo Asu Fully functional. Please see the photos for details.

Condition: used, functionality: fully functional, total width: 1,800 mm, total length: 3,420 mm, total height: 1,350 mm, number of blades: 9, overall weight: 10,000 kg, M&J 2000SHDC Shredder (used machine) – robust single-shaft pre-shredder for wood, bulky waste, and commercial waste. Reliable and powerful for continuous operation. Hedpozdp Dqjfx Al Asu Price: €65,000 Location: Merano (South Tyrol) - Italy

Condition: new, Partially unpacked for photography – unused item from a warehouse clearance. Directional control valve 4WRPEH 6 C4B40P-3X/M/24A1 R901382363 Bosch Rexroth Hodjzd Rchspfx Al Aou

Condition: used, Hydraulic Pump, Pump, Rexroth A2V 1000, Used Machine Manufacturer: Bosch Rexroth Type: A2V 1000 Overall dimensions: Width: 800 mm Depth: 850 mm Height: 730 mm Hodpsy Nnmwsfx Al Aju Weight: 886 kg Design: Bent-axis, variable displacement type Nominal speed: 740 min⁻¹ Operating pressure: Up to 350–400 bar Country of origin: Germany Designed for long service life under continuous heavy-duty operation. Suitable for both open-loop and closed-loop hydraulic systems.

Condition: used, J-Tec Big Bag Discharge Station Bigbag Discharge stations for big bags with vibrating hopper Height adjustable Max big bag dimensions: 120cm x 120cm x 280cm Overall dimensions: 180cm x 180cm x 345-500cm Material: Steel Hedpfx Aey Nttpjl Aou See our other listings

Condition: like new (used), Year of construction: 2021, Transport Vehicle / Autonomous Mobile Robot (AMR), ActiveShuttle 2.0, Bosch Rexroth – Used - : Ex works price: €25,000 (net)! Autonomous Mobile Robot (AMR) for automating intralogistics, capable of transporting dolly carts with a payload of up to 260 kg. Features include 3D obstacle detection, laser navigation without the need for infrastructure modifications, and an integrated touchscreen display for operation. The system is VDA 5050-compliant. Manufacturer: Bosch Rexroth Model: ActiveShuttle 2.0 Year of manufacture: 2021 7211000002280 / 3842560131 Includes: - 1x Charging station - 1x Manual control device Hodpjyk T Easfx Al Asu Transported goods: Dolly carts (600 x 400 mm), max. 1200 x 600 mm Transport weight: max. 260 kg Travel speed: max. 1 m/s Localization (SLAM) & navigation: laser scanner, odometry Safety laser scanner: Type 3, SIL2, Performance Level d ESD (Electrostatic Discharge) Li-Ion Battery (48 V, 17 Ah) Data transfer: WLAN IEEE 802.11 Condition: Very good, operating hours counter likely in the double-digit range, but the customer cannot give an exact value. Available: Immediately Location: D-32339 Espelkamp (Germany) Manufacturer's Description: ActiveShuttle automates and standardizes your internal material and goods flow. Transport your dolly carts loaded with small load carriers (SLC/KLT) with maximum flexibility and safety. From cyclical to demand-based material supply, ActiveShuttle enables a wide variety of transport concepts. Thanks to automatic loading and unloading, manual handling tasks are a thing of the past!

Condition: ready for operation (used), Bosch VM 60-T / Power Supply / Supply Module SN: 640903, used, in good condition, 100% fully functional, delivery scope as per photos. Hodpox Eq Agefx Al Aeu

Condition: ready for operation (used), Bosch VM 60-T / Supply module, serial number: 800297, professionally completely overhauled and tested with a 12-month warranty, 100% functional. Delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please enquire about the price separately. Hedpfx Alex Eq Ato Aou

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Hodpjxzfckofx Al Aeu

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Hodpsxzfkhofx Al Aju

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Hjdpfsxzfk Usx Al Aju

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Hedpfxexzftcs Al Aou

Condition: used, functionality: fully functional, HYDRAULIC VALVE Hsdpfxsxzfuae Al Aju All our items have been inspected by the technical department.

Condition: used, functionality: fully functional, HYDRAULIC VALVE Hjdpfx Aloxzfu Hs Aou All our items have been inspected by the technical department.

Condition: good (used), 6600 mm Rexroth Conveyor Conveyor with its own drive for transporting workpiece carriers longitudinally or transversely between parallel conveyors. It features a lifting and transverse unit for transferring workpieces from a longitudinal to a transverse conveyor and vice versa. Manufacturer: Bosch Rexroth Voltage: 3 x 400 V 50 Hz (16 A) Control voltage: 24 VDC Conveyor medium: Toothed belt Belt length: 6600 x 500 mm Lifting and transverse unit: 500 x 430 mm Belt height: 990 mm Find more items – new and used – in our shop! Hodpfxsxzgg Ds Al Aju International shipping costs on request!

Condition: used, functionality: fully functional, HYDRAULIC VALVE Hedpfexzglaox Al Asu All our items have been inspected by the technical department.

Condition: good (used), J-Tec sack tipping cabinet with filter extraction Entirely stainless steel Hedewyf Iyspfx Al Aju Lockable by lid Full sensor present Control cabinet excl. cabling Equipped with pneumatic bunker vibrator Matching weighing hopper with vacuum filter and double K-Tron dosing screw also available See our other advertisements

Condition: like new (used), Bosch. U-MB 1000Kg/h Loos 10Bar. Hjdou I Ru Hepfx Al Aju